(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford Tractor Distributor


Click here to see parts by model


Ford Distributor Assembly, Complete
- For 9N, 2N, (8N all front mount SN# up to 263843). Includes: Points, condenser & Distributor Cap. Does not include coil or mounting gaskets. (Part No: 9N12100)
$151.80

Ford Distributor
- For 8N serial #263844 and up - side mount. This distributor works with D8NN12171AA point set (included). Electronic ignition not available at this time. (Part No: 8N12127B-WCR)
$193.13

Ford 12 Volt Conversion Kit, Front Mount Distributor
- 8N, 9N, 2N - Updates older 6-volt tractors to 12-volt charging system. For early 8N, 9N, 2N 1948-1951 with front mount distributor (distributor is right behind radiator), to SN# 263843. Kit includes rebuilt unicharge alternator with pulley and self exciting regulator, 12 Volt coil, wiring harness, top alternator bracket, alternator base bracket, alternator adjusting arm, belt, and instructions. Will not work if you have a magneto. (Part No: 8NE10300ALT-C)
$102.05

Ford Distributor Cap Hold Down Clip
- This Distributor Cap Clip is used on Ford Tractors 1950-1664 with side mounted distributor. Two used per tractor. Sold individually. Uses B12145 distributor clamp rivet, not included. Replaces 7RA12144 (Part No: 7RA12144)
$3.95

Ford Distributor Shaft Bushing
- This Distributor Shaft Bushing is used in side mount distributors, 8N serial number after 263, 843. Replaces original part number 8N12120 (Part No: 8N12120)
$4.95

Ford Distributor Bushing
- This Distributor Bushing is used on Ford tractors 1953-1964. Brass, measures 0.470 inch inside diameter x 0.596 inch outside diameter x 0.88 inches long. Replaces original part number 7RA12132A. (Part No: 7RA12132A)
$4.95

Ford Distributor, Cam and Weights Assembly
- Distributor shaft with cam and weights attached for 9N12100 front mounted distributor. For use on Ford tractor models 9N, 2N, and 8N before SN# 263843, 1939 to 1950. (Part No: 9N12187)
$58.51

Ford Distributor Shaft Assembly
- Distributor shaft assembly. For use on models 8N after SN# 263844, 1950 thru 1952. Drilling is required to install distributor gear. (Part No: 8N12175)
$62.19

Ford Distributor Cam and Weight Assembly
- Cam and weight assembly for 8N12127B-WCR original style Side-mounted distributor. For use on models 8N after SN# 263844, 1950 thru 1952. (Part No: 8N12176)
$62.10

Ford Distributor Cap
- For tractor models 8N, 9N, 2N to #263843 all with front mount distributor. Distributor Cap. (Part No: 9N12106C)
$11.31

Ford Distributor Cap, Clip Held
- Fits Tractors: 8N serial number 263844 (Side mount), Jubilee, NAA, 501, 600, 601, 700, 800, 801, 900, 901, 2000, 4000 Series (4 Cylinder). (Part No: NCA12106A)
$7.98

Ford 12 Volt Conversion Kit, Side Mount Distributor
- For Late 8N Tractors with side mount distributors(mounted at an angle near front of engine). Updates older 6-volt tractors to 12-volt charging system. Kit includes: Unicharge alternator w-pulley, Electrical resistor, (Resistor is used if you use your 6 volt coil - OR you can install a 12 volt coil (No coils included) and NOT use this resistor) wiring harness, top alternator bracket, base alternator bracket, alternator adjusting arm, Misc Bolts\Nuts\Instructions. (Part No: 8NL10300ALT)
$96.60

Ford Distributor Gasket kit
- For tractor models 8N, 9N, 2N prior to SN# 263844. Kit contains distributor breaker cover gasket, distibutor base gasket, distributor coil base gasket, cap gasket. (Part No: 9N12104)
$2.92

Ford Distributor Breaker Cover Gasket
- For tractor models 9N, Early 8N, 2N. SOLD IN QUANTITIES OF 10, PRICE IS FOR 1. (Part No: 9N12276)
$1.07

Ford Camshaft Kit, Side Mount Distributor Engine
- Includes: NEW Camshaft with Distributor Gear & Lifters For 8N with Side Mount Distributor (Part No: R0885K)
$264.72

Ford Distributor
- With Slotted Drive Shaft. For tractor models NAA, Jubilee. Comes with cap, rotor, dust cover, points, condenser, etc, and ready to drop in. (Part No: FAC1212D)
$193.13

Ford Distributor
- With 12 Tooth Helican Gear For Ford with 4 Cylinder Gas Engine, 1955-1964, with hex shaped shaft. Comes with points and cap. Replaces 311185. Can Use Pertronix electronic ignition number 1244A if desired. (Part No: FDN12127A)
$193.13

Ford Distributor Base Assembly
- Front mount distributor base assembly, with clamps & rear bushing. For tractor models 8N, 9N, 2N. Does not come with breaker plate. (Part No: 9N12139)
$150.61

Ford Distributor, Breaker Plate
- Breaker assy, complete with points. For 8N, 9N, 2N. For front mount distributor. (Part No: 9N12150)
$28.49

Ford Distributor Dust Cover Assembly
- Dust cover assembly for distributor breaker. For 3 and 4 cylinder gas engines. Tractors with Motorcraft Distributor: 2000, 3000, 4000, 5000 (1965-1974), 2600, 3600, 4100, 4600, 5600, 6600 (1975 and up). Replaces C5NF12239A. (Part No: C7NF12239A)
$20.43

Ford Distributor, Breaker Plate
- 4 Cylinder. Breaker plate with points and condenser. For NAA, NAB, Jubilee, 8N with side mount distributor only, 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). (Part No: FAD12152A)
$42.77

No
Picture
Ford Distributor Point Set
- Point set, Blue Streak premium quality. For tractor models 8N, 9N, 2N (Early). (Part No: A0NN12107ABS)
$23.67

Ford Distributor Cap, Clip Held
- Cap. Used ONLY on OLDER Tisco (Prestolite)replacement distributors (Through January 1987)for Late 8N with side mount distributor. (Part No: IBK1009)
$24.15

Ford Distributor Drive Gear
- For tractor models 8N (early), 9N, 2N. Gear for Distributor Drive (front mount distributor). (Part No: 7RA6255)
$32.09

Ford Distributor Cap
- Distributor cap for 3-cylinder engine on: 2000, 2600, 3000, 3600, 4000, 4100, 4600. (Part No: C5NF12106A)
$9.38

Ford Distributor Dust Cap
- Fits 4-cylinder gas engines on (1950-1964): 8N Side mount distributor, NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. (Part No: FAA12239A)
$4.43

No
Picture
Ford Distributor Rotor
- Rotor. Used ONLY on OLDER Tisco replacement distributors (Through January 1987) for Late 8N side mount Distributors. (Part No: IGP1016D)
$18.32

Ford Distributor Coil Bail
- For tractor models 8N, 9N, 2N with front mount distributor. (Part No: 9N12137)
$2.10

Ford Distributor Gasket Kit
- For tractor models 8N, 9N, 2N prior to SN# 263844. Kit contains distributor breaker cover gasket, distibutor base gasket, distributor coil base gasket, cap gasket. (Part No: 9N12104)
$2.92

Ford Distributor Bushing, REAR
- Bushing, (rear), for front mount distributor, 8N, 9N, 2N. (Part No: 18-12132)
$4.73

Ford Distributor Rotor, Side Mount Distributor
- 4-Cylinder. Fits the following gas tractors up to 1964: 8N with side mount distributor, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: C0NN12200A)
$3.08

Ford Distributor Rotor, Front Mount Distributor
- Fits 8N, 9N, 2N with front mount distributor. (Part No: B2NN12200A)
$3.53

No
Picture
Ford Distributor Driven Gear
- For tractor models NAA, Jubilee, 600, 800, 900, 2000, 4000. All 4 Cylinder. (Part No: FAD12390A)
$44.89

No
Picture
Ford Distributors and Distributor Parts
- These are located in the Electrical System parts section. (Part No: DISTRIBUTORS)
$0.00

Ford Distributor Point Set, 4-Cylinder
- For FDN12127A and 311185 distributor used on NAA, NAB, Jubilee, 8N with side mount distributor only, 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). (Part No: D8NN12171AA)
$4.53

Ford Distributor Bushing, FRONT
- Front distributor bushing is for FRONT MOUNT DISTRIBUTOR only. For 9N, 2N, early 8N. (Part No: 9N12120)
$3.47

Ford Distributor Cap Terminal Kit
- Distributor Cap Terminal kit for 8N, 9N, 2N with front mount distributor Electronic Ignition Conversion Kit. (Part No: 1247XTTERM)
$17.49

Ford Pertronix Distributor Cap
- Pertronix Distributor Cap for 8N, 9N, 2N with front mount distributor that has been converted to Electronic Ignition using kit 1247XT. (Part No: 1247XTCAP)
$27.24

Ford Distributor Clip Pair
- For tractor models 8N, 9N, 2N (Early). Price is for two. Replaces 9N12144. (Part No: 9N12144)
$3.23

Ford Distributor Breaker Plate Retainer Clip
- For tractor models 8N, 9N, 2N (Front Mounted Distributor). (Part No: 91A12146)
$2.10

Ford Ignition Tune-Up Kit, Front Mount Distributor
- For 8N, 9N, 2N, using front mount distributors to serial number 263843. Complete Comprehensive Tune-Up Kit includes: Universal spark plug wire set, distributor cap, heavy duty point set, condenser, heavy duty rotor, heat range matched spark plugs. Note: If your 8N has an angle mounted distributor refer to number TUNEKIT instead. (Part No: 2N9NTUNEKIT)
$40.10

No
Picture
Ford Distributor Dust Cover Seal
- Seal for Part number C7NF12239A. (Part No: S.11453)
$1.38

Ford Distributor Primary Conductor
- Copper. Screw and insulator kit are available separately as part number 350032-KIT. Fits tractor models: Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1881, 2000 4 cylinder, 2030, 2031, 2111, 2130, 2131, 4000 4 cylinder, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 4 cylinder gas, LP thru 1964. 8N serial number 263844 and up 1950-1952 with side mounted distributor. Replaces: 8N12209. (Part No: 8N12209)
$4.50

Ford Distributor Drive Gear
- For 8N with side mount distributor, tractor serial number 263844 and above. (Part No: 7RA12390C)
$33.75

Ford Distributor Rotor
- Rotor. Fits 2000, 3000 and 4000 1965 and up. Fits 2600, 3600, 4100 and 4600 1975 and up. Fits 5000 1965-1975. Fits 5600, 6000 1975 and up. Replaces 21A355, C5NF12200A, 500868, C5NF12200AGV. (Part No: C5NF12200A)
$3.29

Ford Distributor Bushing and Shim Kit
- Distributor Bushing and Shim Kit. Fits tractor models all 1953 to 1964: 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, [ 2110, 2120, 4030, 4110, 4130, 4140 4-cylinder ], 2111, 2121, 2130, 2131, 4000 4 cylinder, 4031, 4040, 4120, 4121, 4131, 501, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, NAA, NAB. Replaces: Roll pin: 60132, Bushing: 7RA12132A, Thrust washer: FAA12179A, Seal: 12476, D8NN12A118AA, O-ring: 87055, 134372. This is a 5-piece kit. NOTE: Bushing must be sized to the shaft after installation. (Part No: FDS3253)
$31.50

Ford Distributor Bushing and Shim Kit
- Distributor Bushing and Shim Kit. fits tractor models all 1953 to 1964: 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, [ 2110, 2120, 4030, 4110, 4130, 4140 4-cylinder ], 2111, 2121, 2130, 2131, 4000 4 cylinder, 4031, 4040, 4120, 4121, 4131, 501, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, NAA, NAB. Replaces: Roll pin: 60132, Bushing: 7RA12132A, Thrust washer: FAA12179A, Seal: 12476, D8NN12A118AA, O-ring: 87055, 134372. This is a 5-piece kit. NOTE: Bushing must be sized to the shaft after installation. (Part No: FDS3253)
$31.50

Ford Distributor Assembly, Complete
- This new, complete distributor is an improved design using a mechanical advance. Fits Ford 3 cylinder tractors from 1965-1980. Fits 2000, 2100, 2110, 2120, 2150, 2300, 230A, 2310, 234, 2600N, 2600R, 2600V, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3330, 334, 335, 340, 3400, 340A, 340B, 3500, 3550, 3600, 3600N, 3600NO, 3600R, 3600V, 3610, 3610NO, 3910H, 3910N, 3910R, 4000, 4100, 4110, 4110N, 4140, 420, 4200, 4330, 4340, 4400, 445, 445A, 450, 4500, 4600NO, 4600O, 4600SU, 4610N, 4610NO, 4610O, 4610SU. Tune-up parts interchange with the original. Replaces 47573265, 47821367, C7NF12127D, F0NN12100AA, F1NN12100AA (Part No: F1NN12100AA)
$193.13

Ford Distributor, Rebuilt
- Complete remanufactured distributor for Ford 3 cylinder tractors from 1965-1980 with distributor 47573265, 47821367, C7NF12127D, F0NN12100AA, F1NN12100AA, C5NF12127B. Does not include the vacuum advance. Vacuum advance is not available. F1NN12100AA is available new with a mechanical advance. A refundable $80.00 core charge will be added to your invoice. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Also NOTE: That if the core is not a complete and good core, part or all of the core charge will not be refunded. Typically, most cores need a shaft replacement and the cost of the shaft will be deducted from the core charge. This is usually $30. (Part No: C7NF12127D)
$174.41

Ford Distributor, Rebuilt
- Complete remanufactured distributor for Ford with 4 Cylinder Gas Engine, 1955-1964, with hex shaped shaft. Replaces FDN12127A and 311185. A refundable $80.00 core charge will be added to your invoice. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Also NOTE: Note that if the core is not a complete and good core, part or all of the core charge will not be refunded. Typically, most cores need a shaft replacement and the cost of the shaft will be deducted from the core charge. This is usually $30 (Part No: FDN12127AR)
$174.41

Ford Distributor Power Inlet Screw Kit
- This kit contains 350032S screw, 7RA12234 insulator, 7RA12233 bushing, # 10 flat washer and 2 10-32 nuts. This kit is used in conjunction with 8N12209 Primary Conductor, not included. It is used on Ford 8N serial number above 263843, NAA, Jubilee, 600, 601, 501, 700, 701, 800, 801, 900, 901, 2000, 4000, 6000 and 1801 produced 1950-1964. (Part No: 350032-KIT)
$4.95

Ford Distributor Clamp Rivet
- This distributor clamp rivet is used to secure part number 7RA12144 to the distributor. Used on Ford tractor models: 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 501, 800, 801, 900, 901, 1801, 2000 and 4000, 1950-1964. It replaces B12145, B-12145. (Part No: B12145)
$0.95


Click here to see parts by model







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2015 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.