(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford Tractor Crankshaft


Click here to see parts by model


Ford Crankshaft
- New kit with bearings. For tractor models 8N, 9N, 2N with Standard Rod and Main Bearings. (Part No: 9N6303ACK)
$535.11

Ford Crankshaft Pulley
- This Crankshaft Pulley for models 8N, 9N, and 2N. Used with attaching a screw type hub for a front mounted hydraulic pump. Crankshaft mounting is 1.63 inch outside diameter and 1.18 inch inside diameter and has four 1\4 inch -20 threaded holes. Can be used as a regular crankshaft pulley without attaching a hub for a front mounted hydraulic pump. Replaces 2N6312. Used with part numbers 192161 and 194354. (Part No: 192160)
$36.75

Ford Timing Gear, Crankshaft
- This Crankshaft Timing Gear replaces original part numbers: 48-6306, 48-6306A, 486306A . For tractor models 8N, 9N, 2N. 22 teeth. (Part No: 486306A)
$40.37

Ford Crankshaft, 4 cyl, Diesel
- For 601, 701, 801, 901, 2000, 4000 (Except Majors) 58\64, all with Diesel 4 cylinder engines. Crankshaft, new, not reground. Replaces E2JL6300BA, D9NN6303B. (Part No: E2JL6300BA)
$552.00

Ford Crankshaft Gear
- For tractor models NAA, Jubilee, 501, 541, 600, 601, 611, 621, 631, 641, 671, 681, 700, 701, 741, 771, 800, 900, 2000, 4000. For 4cyl gas and DSL, except majors. (Part No: EAF6306B)
$45.02

Ford Crankshaft
- NEW Crankshaft for tractor models 9N, 8N, 2N. Does not include bearings. (Part No: 9N6303A)
$428.35

Ford Crankshaft Repair Kit
- Speedi Sleeve Crankshaft Repair Kit will sleeve the end of the crankshaft that has a wear groove worn by the crankshaft seal. Ultra thin sleeve slides over damaged crank. Allows the use of standard seal E5NN6701BA. For 2000, 2600, 2610, 2810, 2910, 3000, 3110, 3600, 3610, 3910, 4000, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: 99472)
$121.73

Ford Crankshaft Assembly
- Crankshaft assembly. Complete with standard rod set CRK-FDX, standard main set MBK-FDX, and thrust washers 957E6634 and 957E6336C. For tractor models Dexta, Super Dexta. (Part No: E2006T9-WB)
$419.56

Ford Crankshaft, 4cyl Gas
- Fits 4 cylinder GAS 134 CID and 172 CID engines on: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Replaces D4JL6300B, C0NN6303J, D1NL6303D, D1NN6300B, D4JL6300B. (Part No: D1NL6303D)
$493.21

Ford Crankshaft, Less Bearings
- New Crankshaft Fits Major, Super Major. (Part No: E1ADDN6303F)
$456.64

Ford Crankshaft, 3-Cylinder, 4.2 in. Stroke
- For 3-cylinder 4.2 inch stroke engines. (Note: we also have crankshafts for 4.4 inch stroke engines, VERIFY stroke AND part number before ordering. Fits 175 cubic inch engine 4.203 stroke 3 cylinder 183 CID and 192 CID engine. For tractor models (3000 Gas\Diesel), (4000 Gas 1965 to 3\1968), 2610 Diesel, 2910 Diesel, (3610, 3910 Gas\Diesel), (3230, 3430, 3930 up to 9\1990. Industrials: 230A Diesel, (250C, 260C Up to 9\1990), (234, 334, 335, 340A, 340B Gas\Diesel), 345C, (3400, 3500 Gas\Diesel), 445C, (4400, 4500 Gas 1965 to 3\1968. Replaces C5NE6303R. Additional $50 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: F0NN6303NA)
$526.82

Ford Crankshaft, 3-Cylinder, 4.4 in. Stroke
- For 3-Cylinder 4.4 inch stroke engines. (Note: we also have crankshafts for 4.2 inch stroke engines, VERIFY stroke AND part number before ordering. Fits 3930, (4000 gas 4\1968 and newer), 4000 Diesel, 4100, 4600, 4110, 4130, 4610, 4630. Industrials: 250C, 260C, 345D, 420, 445, 445C, 445D, (4400, 4500 Gas 4\1968 and newer), (4400 and 4500 Diesel), 515, 530A, 531, 535, (540 and 545 Diesel). Replaces C5NE6303N, E5NN6303AA, F0NN6300MA, F0NN6303BA, FONN6300MA, 83956951. Additional $30 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: F0NN6300MA)
$448.50

Ford Crankshaft, 4.4 In. Stroke, 4-Cyl
- Fits 4 cylinder 268 CID engines with 4.4 inch stroke, balancer drive gear is 78 tooth (will not replace the 76 tooth). Uses 36 mm rod bearings (Bearings NOT included). For tractor models 6610, 6710, 7710. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: D9NN6303AA)
$717.60

Ford Crankshaft Seal, Front
- This Front Crankshaft Seal is for the following models: 2000 and 4000 (before 1964), 600, 601, 700, 701, 800, 801, 900, 901. Used on 134, 144, 172, 192 4-cylinder, 223, 242 cubic inch gas, LP and diesel engines. C0NN6700A, EAA6700B, EAF6700B. (Part No: EAA6700B)
$4.88

No
Picture
Ford Crankshaft Seal, Front
- For tractor models 1000, 1100, 1200, 1300, 1500, 1600, 1700, 1900, 1110, 1210, 1310, 1510, 1710, 1910, 2110. (Part No: SBA198636040)
$9.58

No
Picture
Ford Crankshaft Seal, Rear
- For tractor models 1000, 1100, 1200, 1300, 1500, 1600, 1700, 1900, 1110, 1210, 1310, 1510, 1710, 1910, 2110. (Part No: SBA198636050)
$3.33

Ford Crankshaft Pulley
- This crankshaft pulley is for models 8N, 9N, 2N tractors. Used with a pin style hub, supplied with four rubber bushings for hubs with 13\32 pins when being used with Front Mounted Hydraulic Pump. (Part No: 192152)
$93.48

Ford Crankshaft Seal, Rear
- Comes in halves. 2 needed for complete seal. Minimum order quantity is 2. Fits 134 CID, 172 CID gas and 175 CID diesel engines. For tractor models 2000 up to 1964, 4000 1962 to 1964, 500, 600, 700 Series, 800 Series 1955 to 1957, 801 Series 1958 to 1962, 900 Series 1955 to 1957, 901 Series 1958 to 1962, NAA, Jubilee. ***Minimum order is 2*** (Part No: C0NN6701A)
$5.94

Ford Timing Gear, Crankshaft
- 26 Teeth, Internal Keyway. Used in 158, 175, 192, 201, 233, 256, 256T, 268, 268T, 401 and 401T Engines. For tractor models 231, 233, 234, 333, 334, 335, 340, 420, 445, 515, 531, 532, 535, 540, 545, 550, 555, 655, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3190, 3230, 3310, 3330, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330. (Part No: C5NE6306A)
$71.35

Ford Timing Gear, Crankshaft
- 26 Teeth, Internal Keyway. Used in 158, 175, 192, 201, 233, 256, 256T, 268, 268T, 401 and 401T Engines. For tractor models 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5190, 5200, 5500, 5600, 5610, 5640, 5700, 5900, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7500, 7600, 7610, 7700, 7710, 7810, 7840, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700. (Part No: C5NE6306A)
$71.35

Ford Timing Gear, Crankshaft
- 26 Teeth, Internal Keyway. Used in 158, 175, 192, 201, 233, 256, 256T, 268, 268T, 401 and 401T Engines. For tractor models 230A, 345C, 445C, 4610SU, 530A, 555A, 555B, TW10, TW15, TW20, TW25, TW30, TW35, TW5. (Part No: C5NE6306A)
$71.35

Ford Crankshaft Seal, Rear Pair, Pack of 2
- Rope Seal, REAR. Upper and lower is the same part. For tractor models 8N, 9N, 2N. Replaces 8N6701 and 8N6702. (Part No: 8N6701)
$4.89

Ford Engine Overhaul Kit with New Crankshaft
- Comprehensive kit for the 134 cubic inch gas engine with 3.4375 inch bore, 7\16 inch head studs. Tractors 1953 to 1957. Includes: pistons, wrist pin bushings, piston rings, liners, connecting rod bearings, top and bottom gasket sets. PLUS: main bearings, thrust washers, front and rear seals. Kit INCLUDES NEW CRANKSHAFT. For tractor models NAA, 600, 700. (Part No: EKMC123)
$979.49

Ford Engine Overhaul Kit with New Crankshaft
- Comprehensive kit for tractor models 1958 to 1964 501, 601, 701, 2000 with the 134 cubic inch gas engine with 3.4375 inch bore and 1\2 inch head studs. Includes: pistons, wrist pin bushings, piston rings, liners, con rod bearings, top and bottom gasket sets PLUS main bearings, thrust washers, front and rear seals. Kit INCLUDES NEW CRANKSHAFT. (Part No: EKMC124)
$862.94

Ford Crankshaft, New
- 4 cylinder, 4.2 inch stroke, 12.5 mm 78 tooth Balancer Gear. Uses 36 mm wide Rod Bearings. NOTE: Measure Balancer Drive Gear before ordering. Do not mix sizes. Used on 5000, 5100, 5190, 5200, 5600, 5610, 5700, 6000, 6500, 6600, 6610, 6700, 6710, 7000, 7100, 7200, 7600, 7610, 7700, 7710, Fits Ford Construction & Industrial(s) A62, 650, 655, 750, 5500, 5550, 7500. Replaces 81804029, C5NE6303K, F0NN6300FB (Part No: C5NE6303K)
$621.00

Ford Crankshaft Seal, Front Pair
- Rope Seal, FRONT. Upper and lower is the same part. For tractor models 8N, 9N, 2N. Price is for 2 pieces. Order quantity 1 for 1 engine. Replaces 8N6700 and 8N6707. (Part No: 8N6700)
$4.77

No
Picture
Ford Crankshaft Seal, Rear Rope Type
- Fits 3 cylinder Perkins diesel engines. Sold in a package of 2. Replaces 957E6701 (Part No: 735866M1)
$3.27

No
Picture
Ford Crankshaft Bushing
- Used as bearings two per engine (Front and Rear) Available in STD, .010, .020 For tractor models 1000, 1500, 1600, 1700, 1900, 1910, 2110, 2120 (Part No: SBA198516050)
$26.49

Ford Crankshaft Pulley
- Double Groove Pulley for 2000 (4 cylinder), 4000 (4 cylinder), 600, 601, 700, 701, 800, 801, 900, 901. Replaces C0NN6351A. (Part No: C0NN6351A)
$67.54

Ford Crankshaft Seal Kit, Rear
- This Improved Rear Crankshaft Seal Kit includes detailed instructions. Fits Ford tractors with 134, 172 or 144 Gas, LP or Diesel Engines. Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4 Cylinder, 4000 4 Cylinder. 6000 6 Cylinder. Through 1964. Replaces: 84186689, B3NN6336A, C0NN6336A, C0NN6701A, EBU6701A. (Part No: C0NN6701AKIT)
$27.75

Ford Crankshaft Seal Kit, Rear
- This Improved Rear Crankshaft Seal Kit includes detailed instructions. Fits Ford tractors with 134, 172 or 144 Gas, LP or Diesel Engines. Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4 Cylinder, 4000 4 Cylinder. 6000 6 Cylinder. Through 1964. Replaces: 84186689, B3NN6336A, C0NN6336A, C0NN6701A, EBU6701A. (Part No: C0NN6701AKIT)
$27.75

Ford Crankshaft, New
- This New Crankshaft is for compact tractor model 1710 with the three cylinder diesel. It replaces original part numbers: 83941932, SBA115256260, SBA115256261 (Part No: SBA115256261)
$580

Ford Crankshaft, New
- This New Crankshaft fits 1910. It replaces original part numbers: 83941938, SBA115256470, SBA115256471 (Part No: SBA115256471)
$580

Ford Crankshaft Seal, Front Pair
- This Front Crankshaft Seal is used in Fordson Dexta and Super Dexta Tractors with 144 and 152 cubic inch Perkins Engines. Replaces original part numbers 957E6362, 3639011M1, 34157, 81717731 (Part No: 957E6362)
$8.99

Ford Crankshaft, 3 Cylinder
- This New Crankshaft is used in a 158 cubic inch gas or diesel engine. It has a 3.8 inch stroke. Confirm stroke before ordering. Replaces F0NN6300PA, C5NE6303M. (Part No: F0NN6300PA)
$448.50

Ford Front Crankshaft Wear Sleeve
- This Front Crankshaft Wear Sleeve is used in Ford 4 cylinder gas and diesel engines: 134, 144, 172 CID, built from 1953-1964. It is used to repair wear where the front crank shaft seal goes into the front timing cover. (Part No: RP301112)
$42.18

Ford Crankshaft Oil Seal Packing, Pair
- This Crankshaft Oil Seal Packing is the original rope style rear crank shaft seal. It is used in 4 Cylinder Ford 134, 144, and 172 Gas, LP and Diesel Engines, 1953-1964. Price shown is for 2 (Part No: EBU6701A)
$3.09


Click here to see parts by model







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2015 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.