(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford 8N, 9N, 2N Tractor Steering


Click here to see parts by model


Ford Steering Sector, Left Hand
- Left Hand Steering Sector Shaft (Single Gear) 5 tooth. For 8N serial number 216989 and up, NAA, 600, 700, 800, 900, 2000, 4000. If your left hand does not have 5 teeth, you can use this part but must replace both right and left. Shaft cover must be late style. Replaces OEM numbers 251293 and C3NN3526A. (Part No: 251293)
$158.70

Ford Steering Box Side Cover Gasket
- This is an Aluminum Gasket for Steering Box Side Cover used on Ford 8N prior to serial number 216989. (Part No: 8N3581A)
$3.95

Ford Steering Gear Side Cover O-Ring
- This Steering Gear Side Cover O-Ring is used on 8N after serial number 216988 and other Ford Tractors 1953-1964. Replaces 8N3581B. (Part No: 8N3581B)
$1.95

Ford Steering Sector Retainer Seal
- This Steering Sector Retainer Seal is used on Ford Tractors 1949 to 1964. It replaces 8N3585, 8N3591, 8N3591A, 8N3591B, D5UZ3591A, D5UZ3591B (Part No: 8N3591B)
$6.50

Ford Steering Wheel Washer
- This Steering Wheel Washer is used on 3 spoke wheels, 1939 - 1947. It has a 1.5 Inch Outside Diameter. It replaces original part number 2N3673 (Part No: 2N3673)
$3.95

Ford Steering Wheel Washer
- This Steering Wheel Washer is used with 4 spoke steering wheel. It has a 1.80 inch outside diameter. It replaces original part number 9N3673 (Part No: 9N3673)
$3.95

Ford Steering Column Felt Dust Seal Retainer
- This Steering Column Felt Dust Seal Retainer is used on Ford 9N and 2N 1939-1947. It replaces original part number 9N3661. (Part No: 9N3661)
$3.50

Ford Steering Shaft and Pinion
- Fits 9N and 2N tractors 1939 to 1947. Contains shaft and pinion only. For complete set use Part number SGS3. (Part No: 9N3525)
$86.94

Ford Steering Wheel
- For 9N, 2N. 17 5\8 Diameter, 11\16 Keyed hub, replaces OEM# 2N3600. Looks just like original with bare spokes! For 9N and 2N. (Part No: R2090)
$26.92

Ford Steering Shaft & Nut Assembly
- Right hand spiral with single bolt sector adjustor. For tractor models 8N (1950->1952). (Part No: 8N3575B)
$129.65

Ford Steering Shaft & Nut Assembly
- For 8N 1948-1949 with 4 bolt Sector Adjustor. LEFT HAND SPIRAL. Serial number less than 216989 (1948-1949). (Part No: 8N3575A)
$189.06

Ford Steering Wheel
- Keyed, steel spokes. Wheel measures 17 1\2 inches in diameter and 3\4 inch hub. Replaces E0NN3600AA (Part No: 180576M1-OE)
$26.14

Ford Steering Shaft Bearing and Cup Assembly - QTY 2
- 1-3\4 inch outside diameter. For tractor models 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000. 1953-1964. Price is for 2 Sets (2 Bearings and 2 races. 2 sets are required per steering shaft\top and bottom. Replaces 8N3571 and 8N3552. (Part No: 8N3505)
$38.52

Ford Steering Gear Set
- Fits 9N and 2N tractors 1939-47. Set contains one each of 9N3525 Shaft and pinion assembly, 9N3526 steering sector, right hand, and 9N3527 steering sector, left hand. (Part No: SGS3)
$346.38

Ford Steering Shaft Bearing Cup
- For tractor models up to 1964 including: 8N late, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Part No: 8N3552)
$6.95

Ford Steering Shaft Bearing
- For tractor models up to 1964 including: 8N, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Part No: 8N3571-OE)
$7.35

Ford Steering Shaft Bearing Cup
- For tractor models 9N, 2N. Price is for 1. Two are used on the steering shaft, one at the top and one at the bottom. Replaces B3552. (Part No: 6-TIM)
$15.43

Ford Steering Shaft Bearing
- For tractor models 9N, 2N. Replaces 683571A. Price is for 1. Two are used on the steering shaft, one at the top and one at the bottom. (Part No: 5BC-TIM)
$13.10

Ford Steering Sector Gear Bushing
- For tractor models 9N, 2N. Priced per pair. Two halves needed per side. 2 pairs needed per tractor. Order 2 for complete tractor. (Part No: 9N3517)
$12.47

Ford Steering Sector Gear (RH)
- For tractor models 9N, 2N. (Part No: 9N3526)
$135.93

Ford Steering Sector Gear (LH)
- For tractor models 9N, 2N. (Part No: 9N3527)
$135.93

Ford Steering Shaft Bearing And Cup Assembly
- Replacement for bearing type. For tractor models 1948-1964, 8N, NAA, 600, 800. For steering shaft on tractors with manual steering. This is a one piece neoprene bearing that replaces 1 of 8N3552 and 1 of 8N3571. Price is for One (1) assembly - Two (2) assemblies required per steering shaft\top and bottom. (Part No: 8N3571-52)
$19.31

Ford Steering Column Collar
- For 9N, 2N. Collar, retains dust seal in top of column. Exactly Like Original. WITHOUT GREASE FITTING HOLE. (Part No: 9N3669A)
$6.50

Ford Steering Column Collar with Grease Fitting Hole
- For 9N, 2N. Collar with grease fitting hole, retains dust seal in top of column. Exactly Like Original. WITH GREASE FITTING HOLE. (Part No: 9N3669B)
$6.50

Ford Steering Wheel
- 17-5\8 inch diameter, 11\16 inch-13\16 inch keyed, 3 covered steel spokes. For tractor models: 9N, 2N 1939 to 1947. Replaces 2N3600. (Part No: 180576M1)
$18.30

Ford Steering Wheel, Splined Hub
- Steering Wheel OEM Style, 17-1\2 inch diameter, 11\16 inch 36-SPLINE Hub. Metal Spokes. For: 8N, 2000, 4000, 600, 700, 800, 900, NAA. (R2091) (Part No: 8N3600-OE)
$26.24

Ford Steering Wheel Nut, Chrome
- Nut, steering wheel ACORN style. 5\8-18, CHROME PLATED. For tractors: 9N, 2N {1939-1947}. Head uses a 1 1\8 inch wrench. (Part No: 351103CC)
$4.88

Ford Steering Wheel Nut, Chrome
- Nut, Steering Wheel ACORN style. 11\16 inch-20. CHROME PLATED. For tractor models 8N, NAA {1948-1954}, 600, 700, 800, 900, NAA. (Part No: 351114CC)
$5.94

Ford Steering Arm
- For 4100, 2100, 2600, 3100, 3600, 600, 700, 800, 8N, 900, Dexta, Super Dexta NAA, Jubilee. Steering Arm also replaces 310799, 8N3130B, 957E3130. (Part No: 310799)
$38.54

Ford Steering Sector, Right Hand
- Sector (Double Gear) 7 tooth. Replaces OEM numbers 251294, C3NN3527A. If your left hand does not have 5 teeth, you can use this part but must replace both right and left. (Part No: 251294)
$156.44

Ford Steering Shaft Grommet
- Steering Column to Instrumental Panel Grommet. For tractors: 8N {1948-1952}. (Part No: 8N3578)
$4.95

Ford Steering Wheel Nut - Chrome
- Acorn style chrome nut, 11\16 coarse thread. Fits 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (Part No: S.61963)
$5.76

Ford Steering Wheel Nut, Unfinished
- Steering Wheel Nut - Unfinished - Acorn Style Nut, 11\16 inch. Fits 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (Part No: 351114S)
$6.62

Ford Steering Shaft Seat & Seal Kit - Upper
- For 8N, NAA. This kit contains: 8N3570 seal (item 3), 8N3520 spring (item 4), 8N3518 seat (item 5), 8N3517 bearing (upper) (item 6). (Part No: 8N_STRKIT)
$22.91

Ford Steering Gear Assembly
- Complete manual steering gear assembly fits late 8N [2 bolt - Sector Shaft Cover] (1949-52). NOTE: Can replace EARLY style Gear Box [4 bolt - Sector Shaft Cover] by swapping drag links side to side. (Part No: 8N3505B)
$586.50

Ford Steering Shaft Bearing Cone (1)
- Upper or Lower Bearing Cone for Models: 9N, 2N. Two used per tractor. Price is for each. Replaces 9N3573 (Part No: 4CB-TIM)
$21.65

Ford Gasket, Steering Gear Housing, Rear
- For tractor models 9N, 2N 1939-1947. (Part No: 9N3593B)
$2.95

Ford Gasket, Steering Gear Housing, Front
- For tractor models 9N, 2N 1939-1947. (Part No: 9N3594)
$2.95

Ford Steering Arm Dust Seal
- For tractor models 2000, 3000, 4000, 600, 800, 8N, 900, NAA. Replaces C5NN3125A. (Part No: 8N3528)
$1.34

Ford Steering Sector Shaft Packing
- 4 required per tractor. **MINIMUM ORDER is 2 PIECES.** For tractor models 9N, 2N 1939-1947. (Part No: 9N3670)
$6.65

Ford Steering Gear, Pitman Shaft Bushing
- For tractor models 8N, NAA 1949-1954. (Part No: 8N3553)
$7.23

Ford Steering Wheel
- This Restoration Quality steering wheel measures 18 inch diameter, with 3\4 inch keyed hub, and has 4 covered steel spokes. For model 9N 1939-1940. Replaces 9N3600B. (Part No: S.67507)
$44.92

Ford Steering Column Dust Seal
- For tractor models 9N, 2N. 1939-1957. (Part No: 9N3660)
$2.95

Ford Steering Wheel Nut, Black
- Nut, steering wheel ACORN style. 5\8-18, Black. For tractors: 9N, 2N {1939-1947}. (Part No: 351103CCBlack)
$6.21

Ford Steering Wheel Nut, Black
- Nut, Steering Wheel ACORN style. 11\16 inch-20, black. For tractors: 8N, NAA {1948-1954}, 600, 700, 800, 900, NAA. (Part No: 351114CCBlack)
$5.46

Ford Steering Shaft Gear Thrust Bearing Retainer
- For tractor models 631, 640, 641, 650, 651, 660, 661, 671, 681, 8N, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881. (Part No: 8N33581)
$2.94

Ford Steering Gear, Inner Race
- Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Part No: S.67672)
$7.49

Ford Steering Gear, Outer Race
- Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Part No: S.67673)
$15.38

Ford Steering Gear, Aftermarket Box
- This Single Sector is used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Part No: S.67670)
$63.78

Ford Steering Gear, Ball Bearing
- 3\8 inch ball, used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. 22 balls required per box, 11 for each bearing, price is per ball. (Part No: S.10903)
$0.33

Ford Steering Sector Kit
- This Steering Sector Kit is for 1 side, 2 kits used per tractor. Kit contains adjuster bolt, nut, washer, o-rings, shims, and felt seal. (Adjuster Bolt is Allen Head Type, not slotted like original). For tractor models (8N 1950-1952), Jubilee, NAA, 600, 800, 601, 801, 2000, 4000 all before 1965. (Part No: S.67109)
$16.39

Ford Steering Column Bearing Spring
- This Steering Column Bearing Spring is for tractors without power steering 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948-1964). (Part No: 8N3520)
$2.95

Ford Steering Column Seal
- This Felt Dust Seal is for the top of steering column. Tractors: 8N, through 4000 4 cylinder. (1948-1964). (Part No: 8N3570)
$1.50

Ford Steering Column Spring Seat
- For Steering Column Bearing (without power steering). Tractors: 8N and up (1948 to 1964). (Part No: 8N3518)
$3.50

Ford Steering Shaft Bearing Assembly
- For Steering Column (without Power Steering). Ford tractors 1948 to 1964. Replaces 8N3517, C5NN3N716A. For models without Power Steering NAA, 1801, 2000, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4031, 4040, 4110, 4121, 4130, 4131, 600, 601, 700, 701, 800, 801, 8N, 900, 901. (Part No: 8N3517)
$17.50

Ford Steering Shaft Bearing Kit
- Kit consists of 6-TIM quantity 2, 5BC-TIM quantity 2, and 4CB-TIM quantity 2. For tractor models 9N, 2N. (Part No: STEERING_KIT)
$64.00

Ford Steering Wheel Dome Nut Washer
- With beveled edge. For tractor models 8N, NAA, Jubilee, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000 (4 cylinder), 2030, 2111, 2120, 2130. (Part No: 356515S)
$4.21

Ford Steering Wheel Nut
- Zinc Plated Steel Nut, Steering wheel Acorn Style. 5\8-18 for 9N and 2N (1939-1947). Head uses a 1 inch wrench. (Part No: 351103S)
$3.50

Ford Steering Gear Housing Gasket
- For tractor models 9N after serial number 47509 and all 2N. Replaces 9N7223B (Part No: 9N7223B)
$3.75

Ford Steering Wheel Washer
- This steering wheel washer is 1.497 inches outside diameter, 0.645 inches inside diameter and is 0.180 thick. It is used on Ford 9N and 2N. It replaces original part number 2N3673 (Part No: 180577M1)
$2.24

Ford Steering Column Collar with Grease Fitting Hole
- This steering column collar comes with dust seal and spring. Comes with a primer paint coat on cover and with the grease fitting hole. Replaces 9N3669 Cap, 9N3699 Spring and 9N3660 Dust Seal Fits 9N and 2N. (Part No: 9N3669BPLUS)
$11.70

Ford Steering Sector Shaft Seal
- Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Part No: 8N3586)
$1.10

Ford Steering Column Shim Kit
- This Shim Kit contains 2 - .020 Shims, 2 - .010 Shims, 2 - .005 Shims. For tractor models 8N with 2 bolt adjuster covers, NAA, Jubilee, 600, 601, 800, 801, 2000, 3000, 4000, 2600 manual steering, 3600, 3900, 2610, 3610, 3910 manual steering, 4110LCG. Replaces 251296, 8N3595C, 8N3595D (Part No: 8N3595KIT)
$11.95

Ford Steering Gear Housing Gasket
- This Steering Gear\ Gear Shift Housing Gasket is used on 9N Tractors before Serial number 47508. It replaces original part number 9N7223A (Part No: 9N7223A)
$3.75

Ford Steering Column Spring
- This Steering Column Spring is used on Ford 9N and 2N tractors, 1939-1947. Replaces 9N3699 (Part No: 9N3699)
$3.95


Click here to see parts by model







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2015 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.