(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford 8N, 9N, 2N Tractor Hydraulic


Click here to see parts by model


Ford Hydraulic Pump Overhaul Kit
- For 8N, 9N, 2N (1939-52). Kit contains cam blocks, pistons, chamber kits, PTO shaft bushing, safety valve, and gaskets. (Part No: HPOK1)
$110.33

Ford Piston for Hydraulic Pump
- For 8N, 9N, 2N (1939-52). (Part No: 9N615)
$24.44

Ford Hydraulic Lift Cylinder
- For 8N, 9N, 2N. Hydraulic Lift Cylinder. Cylinder only. Can use 3 ring piston or o-ring type. Sold seperately. (Part No: 9N510D)
$64.17

Ford Hydraulic Lift Cover Repair Kit
- For 8N, 9N, 2N. Lift Cover Repair Gasket Kit. Gasket Set includes 2 valve chamber gaskets, lift cover gasket, base pump gasket, 2 inspection cover gasket cylinder to center housing cover, 2 hydraulic lift cylinder housing gasket. (Part No: LCRK928)
$7.49

Ford Superior & Wagner Loader Hydraulic Pump Kit
- Hydraulic Pump Kit for various loaders mounted on Ford tractors. Pump specifications: 14 GPM at 2000 RPM, 3\4 inch round shaft with key, left hand rotation, inlet port 1 inch NPT, outlet port 3\4 inch NPT. Kit includes hydraulic pump, foot\flange bracket, 2 mounting bolts and washers, and 2 adapters. Replaces 3660. (Part No: L827-10X)
$456.77

Ford Hydraulic Intake Valve Spring
- This Hydraulic Intake Valve Spring is goes between the pump control valve and the bushing. Ford 1939-1952. It replaces original part number 8N697 (Part No: 8N697)
$4.95

Ford Hydraulic Lift Yoke Pin
- This Hydraulic Lift Yoke Pin is 3\4 inch x 9 7\8 inch and is used on Ford 8N 1948-1949. It replaces 8N486A. (Part No: 8N486A)
$24.95

Ford Hydraulic Valve Assembly
- This version does NOT have a slot in the round end. For (9N with 9N600 Pump Assembly), (2N with 9N600 Pump Assembly 1939-1947). Hydraulic Valve Assembly includes housing, pintle, spring, pin clip, fully assembled. (Part No: 9N640)
$19.67

Ford Hydraulic Lift Ram Arm
- This Hydraulic Lift Ram Arm fit the 8N, 9N, 2N. This part will work for the 9N, 2N and early 8N but does not look like the original. This does look like the original for the Late 8N. For an early 9N, this part may require additional machining, such as grinding down the end raised portion, and\or shortening one end 1\4 inch and adjusting with shims. (Part No: 8N545B)
$69.77

Ford Hydraulic Lift Shaft Arm
- For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000 gas. (Part No: 9N543B)
$62.79

Ford Hydraulic Lift Level Indicator (Dip Stick)
- 8N, 9N, 2N, NAA. Hydraulic Lift Level Indicator. (Part No: NAA927C)
$4.70

Ford Hydraulic Lift lever Assembly
- For 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 PRIOR TO 1965. Assembly contains: Lift control lever with ball end part number 2N512, lift control plate (cast aluminum as original) part number 2N-516A2 and friction disc part number C5NN518B. (Part No: 2N512)
$42.27

Ford Hydraulic Lift Piston Connecting Rod
- For Dexta, NAA, 2N, 8N, 9N, 2000, 3000, 4000, 600, 700, 800, 900. Replaces NCA526A and 957E526, 9N526. (Part No: 86563314)
$42.84

Ford Hydraulic Pump Rebuild Kit, Comprehensive
- For tractor models 8N, 9N, 2N (1939 to 1952). Kit contains 2 cam blocks, 2 pistons, 2 chamber repair kits, PTO shaft bushing, safety valve, 2 valve chambers with valves, base gasket, sump pump gasket, 2 side gaskets, PTO shaft gasket, 2 side plate gaskets. (Part No: S.61725)
$298.52

Ford Hydraulic Lift Piston
- This is a single groove Hydraulic Lift Piston that measures 2-1\2 inches in diameter, groove is centered 1 1\4 inch from bottom of piston. O-Ring available as NAA533A and back up washer as NAA473A. For tractor models NAA, NAB, 8N, 9N, 2N, Jubilee. (Part No: NAA530B)
$20.52

Ford Hydraulic Pump Hub
- For tractor models 8N, 9N, 2N. Hydraulic Pump Hub is 3 inches outside diameter, 2 13\32 inches center to center on pins (no holes). Includes pins. (Part No: 191196)
$45.89

Ford Hydraulic Pump Hub
- This Hydraulic Pump Hub is used on tractor models 8N, 9N, 2N. Verify measurements. Hydraulic Pump Hub is 3 3\8 inches outside diameter, 2 3\8 inches center to center on holes. 6 spline - center bore = 5\8 inch on the lands and 3\4 inch on the grooves. Used with part numbers 192160 and 194354. (Part No: 192161)
$46.98

Ford Hydraulic Lift Shaft
- For tractor models: 8N, 9N, 2N, NAA, Jubilee, 2000, 4000, 600, 601, 700, 701, 800, 801, 900, 901. Hydraulic lift shaft. [PLEASE NOTE: THIS SHAFT HAS 1 THREADED HOLE ON EACH END. IT WILL REPLACE OLDER STYLE USED ON 8N, 9N, 2N TRACTORS WITH 2 HOLES ON EACH END BUT WILL REQUIRE 2 WASHERS PART number NCA551A and (2) 7\16 inch-20 X 11\16 inch BOLTS. WASHERS AND BOLTS NOT CURRENTLY AVAILABLE FROM YESTERDAYS TRACTOR]. (Part No: NCA544B)
$298.07

Ford Hydraulic Lift Piston O-Ring
- For 8N, 9N, 2N. O-Ring used on piston part number NAA530B. Price is for each. Used with Lift Piston Washer part number NAA473A. NOTE: The leather washer goes on first, then the o-ring. (Part No: NAA533A)
$0.84

Ford Hydraulic Lift Piston Washer
- For 9N, 8N, 2N. Hydraulic Lift Piston Washer used with Piston part number NAA530B. Price is for each. (Part No: NAA473A)
$2.06

Ford Hydraulic Pump Drive Shaft
- APPLICATION: 8N, 9N, 2N, SHAFT DIAMETER: 3\4 INCH, SHAFT OVERALL LENGTH: 13-1\16 INCHES, END A TYPE: KEY, END A SIZE: 3\4 INCH, END B TYPE: LEFT HAND THREAD, END B SIZE: 5\8 INCH. END A mates to coupler L601-14. END B mates to hub 191196. (Part No: 190760)
$20.58

Ford Hydraulic Pump Drive Shaft
- For tractor models 8N, 9N, 2N. 3\4 inch shaft diameter, 13 inches in length, 6 spline on one end and .187 inch keyway on other end. Mates with end hub 192161 or 54C2055. Other end mates with coupler L601-14. (Part No: 194354)
$22.43

Ford Hydraulic Safety Valve Assembly
- For tractor models 8N, 9N, 2N. (Part No: 8N638)
$20.33

Ford Hydraulic Lift Piston
- 3 Ring Piston, Hydraulic Lift. For 8N, 9N, 2N. Uses 9N675 ring set. (Part No: 9N530B)
$29.25

Ford Hydraulic Lift Shaft Bushing
- 2 used. Inside diameter 2.000 inches, outside diameter 2-3\8 inches, length 3.00 inches. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000, 3000, 4114. (Part No: 9N531C)
$17.52

Ford Hydraulic Pump Hub
- Hydraulic pump hub for Sherman 54 series loader. Hydraulic pump hub 3 7\8 inch outside diameter, 2 3\4 inches center to center on holes. 6 spline center bore, 3\4 inch inside diameter. (Part No: 54C2055)
$40.11

Ford Hydraulic Lift Control Quadrant
- For tractor models 8N, 9N, 2N. Hydraulic Lift Control Lever connects to this. Also fits NAA, Jubilee, 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 1939-1964 4 cylinder. Replaces 2N516A1, 2N516A2, 2N516B. (Part No: 9N515)
$21.36

Ford Hydraulic Spring Seat
- For tractor models 8N, 9N, 2N, NAA, 600, 900 (1948-1954). (Part No: 9N525B)
$7.50

Ford Gasket, Hydraulic Pump Drain
- Fits Ford Tractors, 1939 to 1964. Replaces: 81804570, 8N7011. (Part No: 8N7011)
$.44

Ford Hydraulic Lift Piston Rings
- Kit of 3, steel, fits piston part number 9N530B. For tractor models 8N, 9N, 2N. (Part No: 9N675)
$10.23

Ford Hydraulic Lift Lever
- For tractor models 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4 Cylinder). (Part No: S.66598)
$20.63

Ford Hydraulic Pump Valve Chamber
- Left Hand Valve Chamber, less valves. For 8N, 9N, 2N. (Part No: 9N622)
$84.14

Ford Pin, Hydraulic Lift Yoke
- This Hydraulic Lift Yoke Pin measures 15\16 diameter and 3 1\4 inches in length. For tractor models 8N, NAA, Jubilee, (1950-1954). (Part No: 8N486B)
$13.13

Ford Pin, Hydraulic Lift Rocker
- Lift Rocker Pin to Rear End Housing. 3\4 inch x 3.14 inch. For tractor models 9N, 2N (1939-1947). (Part No: 352625S8)
$8.41

Ford Hydraulic Pump Valve Chamber
- Left Hand Valve Chamber, less valves. For 8N, 9N, 2N. USE PART NUMBER 9N622. (Part No: 9N622-C)
$84.18

Ford Hydraulic Pump Valve Chamber
- Right Hand Valve Chamber, less valves. For tractor models 9N, 8N, 2N. Cast Iron. (Part No: 9N621-C)
$84.14

Ford Hydraulic Pump Valve Chamber Assembly, RH
- Right Hand Valve Chamber with valves. For tractor models 9N, 8N, 2N. (Part No: 9N621-ASSY)
$82.73

Ford Hydraulic Pump Valve Chamber Assembly, LH
- Left Hand Valve Chamber with valves. For tractor models 8N, 9N, 2N. Cast Iron. (Part No: 9N622-ASSY)
$82.73

Ford Hydraulic pump base to center housing Gasket
- For tractor models 8N, 9N, 2N. (Part No: 9N611)
$1.77

Ford Gasket, Hydraulic Cylinder to Center Housing
- Hydraulic Cylinder Gasket measures 1 inch outside diameter and 7\16 inch inside diameter. For tractor models 8N, 9N, 2N. Priced each. (Part No: 9N552)
$0.45

Ford Universal Pressure Gauge, Hydraulic
- 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1\2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1\4 NPT male brass fitting. (Part No: GG400)
$11.13

Ford Hydraulic Pump, New
- For tractor models 8N. (Part No: 8N605A)
$631.35


Click here to see parts by model







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2015 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.