(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford 8N, 9N, 2N Tractor Axle


Click here to see parts by model


Ford Axle
- Rear Axle 8N, NAA, Jubilee. Total length is 32.25 inches. Additional $15 shipping ADDED DUE TO WEIGHT** IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 8N4235C)
$156.98

Ford Axle Bearing Assembly
- For tractor models: 8N, 9N, 2N, NAA, Jubilee. This includes rear axle bearing (2N4221) and cup (9N4222). (Part No: S.18516)
$36.21

Ford Rear Axle Outer Seal
- Oil Seal, outer, rear axle shaft. Inside diameter 2 3\8 inches. For tractors 9N, 2N, (1939-1947). 2.437 inch inside diameter, 3.485 inch outside diameter. For 9N, 2N. (Part No: D6NN4251A)
$4.37

Ford Axle Oil Seal-Outer
- For tractor models 8N to serial number 486753. inside diameter 2 3\4 inch. Rear Axle Oil Seals. Also comes as part of A8NN4248A Assembly. Packaged in quantity of 2, price is for a pair. (Part No: A8NN4251A)
$12.99

Ford Axle Seal, Outer Pair
- For tractor models 8N serial number 486753 and up, NAA, Jubilee. Comes in pairs. 3-3\4 inch outside diameter, 2-7\8 inch inside diameter. (Part No: D5NN4115A)
$9.41

Ford Axle Outer Retainer
- For model 8N to serial number 486753. Rear Axle Outer Retainer. These retainers come with seals and gaskets. Order Quantity of 1 for a set of 2. (Part No: A8NN4248A)
$19.17

Ford Front Axle Assembly with Bushing
- For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000 (with Manual 7-57\PS 55), 4000 (with Manual 7-57\PS 55). This axle is for tractor models that have a standard front end (NOT for adjustable axle). Replaces NAA3010B2. Add $15.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: D9NN3010EA)
$193.19

Ford Axle Shaft Bearing
- Rear Axle Shaft Bearing, Tapered Cone. (Part No: 2N4221)
$47.65

Ford Axle Nut, Clamp Lock Type
- Clamp Lock Nut, rear axle, 1-1\4 inch. For 8N, NAA, Jubilee. This improved nut helps to prevent premature wear on both axle and hub. (The ring on the original type can fall out or rust out which allows the nut to come loose). This nut stays tight! Replaces CBPN-4179-A and 8N4187. (Part No: LN10-21)
$39.80

Ford Rear Axle Sure-Seals
- Fits 9N, 2N. 1 pair. No need to split collar and replace old outer axle seal. Sure-Seal fits over top of sweat collar. (Part No: SS92)
$13.12

Ford Axle Hardware Kit 4 PCS.
- Bolt Kit, front axle bolt, nut and washer. Holds right and left axles to center axle. For tractors: 8N, 9N, 2N {1939-1952}. For 600, 700, 800, 900, NAA. (Part No: 350789-KIT)
$9.95

Ford Axle Collar
- For tractor models 9N, 2N. (Part No: 9N4132)
$11.22

Ford Rear Axle Bearing Race
- Tapered Bearing Cup For 4120, 600, 800, 8N, 9N, 2N, Jubilee, NAA. (Part No: 9N4222)
$8.21

Ford Axle Seal, Inner Pair
- Seal, Oil For 8N, Jubilee, NAA. Enter quantity 1 for package of 2. (Part No: 8N4233A)
$7.55

Ford Axle Nut and Snap Ring
- Kit, Nut and Snap Ring. For tractor models 8N, NAA. (Part No: CBPN4179A)
$11.61

Ford Axle Shaft Gasket
- For tractor models 8N, NAA, Jubilee all 1948-1954. Inside diameter 1 15\16 inches, outside diameter 2 3\16 inch. These were originally made of cork and all replacements are made from rubber. These must be replaced when the axle seals are replaced. (Part No: 8N4284)
$2.80

Ford Axle Washer
- Axle washer is for model 8N. Price is for each. If you order 2, you will receive 2 washers. Must be ordered in quantities of 2. (Part No: 8N4293)
$4.31

Ford Axle Pin Support Bushing
- Axle Pin Bushing for models 2N, 8N, 9N, 600, 700, 800, 900, 2000, 4000, NAA, Jubilee. Front Axle Bushing 1939-1964 with standard front axle. Bushing, front axles, 1.778 inch inside diameter, 1.913 inch outside diameter, 1.5 inch length (not for heavy, industrial or grove axles). (Part No: 2N3039)
$6.33

Ford Axle Nut Lock Ring
- For 8N 1948-1953, Jubilee and NAA. Snap Ring. Priced each. (Part No: 8N4187)
$1.46

Ford Axle Nut
- 1.25 inch, 18 hex. For tractor models (8N 1948-1953), (NAA, Jubilee 1953-1955), NAB. (Part No: 8N4179)
$7.53

Ford Axle Outer Retainer Gasket
- Requires 2. For tractor models 8N 1948-1950. (Part No: 8N4225)
$2.04

Ford Axle Oil Seal Gasket, Inner
- For 8N 1948-1950. Used between A8NN4251A Seal & Retainer in Oil seal assembly. Price is for each. (Part No: 8N4290)
$.56

Ford Axle Kit, Late
- Kit contains, 2 rear axle shaft bearings, 2 inner seals, 2 washers, 2 housing gaskets, 2 shaft bearing cups, 2 inner oil seals, 1 pr outer oil seal assemblies, 2 nut & lock rings, 2 shaft gaskets. For model 8N after Serial Number 486753. (Part No: AXLEKIT-8N)
$217.76

Ford Axle Kit
- Kit contains, 2 shaft bearings part number 2N4221, 2 housing gaskets part number 2N4035, 2 shaft collars part number 9N4132, 2 bearing cups part number 9N4222, 2 outer axle seals part number D6NN4251A (for 2N and 9N), 2 outer axle seal assemblies part number A8NN4248A (for early 8N), 2 rear axle nut lock rings part number 8N4187. For tractor models 9N, 2N and 8N up to serial number 486753. Kit comes with 2 sets of axle seals, one for use on 9N and 2N tractors and one set for 8N. You will have one set not used. (Part No: AXLEKIT-8NEARLY)
$181.36

Ford Center Disc to Rear Axle Bolt
- 1.87 inches long, 5\8 inch x 18 UNF right hand threads. For tractor models 9N, 2N. (Part No: 9N1117)
$8.78

Ford Front Axle Pin
- For model 2N up to serial number 167489. (Part No: 2N3126E)
$65.69

Ford Radius Rod to Front Axle Pin
- This model is for model 8N 1948-52. (Part No: 357623S8)
$7.59

Ford Gasket, Rear axle housing gasket
- Gasket center housing to rear axle housing. Tractors: 8N, 9N, 2N. (Part No: 2N4035)
$1.73

Ford Bush Hog Axle Spacer Bushing
- Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: SPB40)
$4.91

Ford Pin, Front Axle
- Outside diameter 1.743 inch, inside diameter 1.310 inch, length 4 inches. For tractor models 9N, 2N (serial number 164489 and up), 8N. Hardened steel. The part has a fully open end which will accommodate a loader pump shaft. If you need OEM style with smaller opening, order 2N3126E. (Part No: 2N3126D)
$22.58

Ford Front Axle Support Pin Spacer
- 1.783 inch inside diameter, 2.023 inch outside diameter, .758 inch length. For tractor models 8N, NAA, Jubilee (1948-1954). (Part No: 8N3024)
$3.95

Ford Front Axle Spacer
- This Front Axle Spacer is on the back of the front axle assembly. It measures 1.77 inches I.D. X 2.75 inches O.D. Used on 8N and NAA\Jubilee tractors, 1948-1954 (Part No: 8N3027)
$0.95


Click here to see parts by model







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2015 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.