(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford 801 Tractor Parts

[ Show Pictures ]

[Categories]   [All Ford Models]   [Print]  


Brakes
Brake Adjusting Hole Cover - For tractor models 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, (2000, 4000 4 cylinder) all from 1948 to 1964. (Part No: H2092)
$2.95

Brake Anchor Pin Retainer - For tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1955 to 1964). This item sold in multiples of 2, price shown is for 1. (Part No: NCA22286A)
$6.83

Brake Back Plate Dust Seal - For tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1958 to 1964). (Part No: NCA2217A)
$6.92

Brake Camshaft Hole Cover Spring - Tractors: 8N, Jubilee, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948-1964). (Part No: 8N2322)
$4.96

Brake Drum - (Cast Iron). Fits 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (Prior to 10/1965). Add $5.00 additional shipping EACH due to weight of drum. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. Replaces 86533415, NCA1126A. (Part No: NCA1126A)
$87.98

Brake Shoe Anchor Pin - For tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1955 to 1964). (Part No: NCA2333A)
$3.39

Brake Shoe Hold Down Spring Pin - For tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1955 to 1964). (Part No: NCA22276A)
$2.19

Brake Shoe Return Spring, RH Brake - For tractor models 8N, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1948 to 1964). (Part No: nca2204a)
$5.33

Brake Shoe, with Lining - Brake Shoe with Lining For 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1955 - 1964) - Ordering 1 will get you 1 brake shoe. You must order in quantities of 2. (Part No: NCA2218B)
$23.88

Clutch
Clutch Disc - Transmission Disc: 9 inch organic, spring loaded, 15 splines, 1 inch hub. Replaces E8NN7550GA, C0NN7550B, C0NN7550A. (Part No: E8NN7550GA)
$83.34

Clutch Disc, 10 inch - 15 spline, 1 inch hub. For tractor models 601, 701, 801, 901, 2000, 4000 1958-1964 with 4 and 5 speed single clutch. (Part No: E8NN7550FA)
$57.61

Clutch Fork To Cross Shaft Pin - This clutch fork to cross shaft pin is 5/16 inch X 1 1/2 inches. It is used on Ford Tractors built between 1939 and 1964. Replaces 352581S8, 352581-S8, 352581S. (Part No: 352581S8)
$1.50

Clutch Kit - Kit contains 9 inch, 15 spline drive disc with 29 spline double pressure plate assembly (311435), includes pilot bearing (C5NN7600A) and release bearing (83914247). Note: Pilot Tool is not included and not needed in this kit. For live PTO double clutch models (1955 to 1964). Tractors: 600, 700, 800, 900, 2000 4 cylinder, 4000 4 cylinder, Dexta, Super Dexta. (Part No: 311435K_)
$310.00

Clutch Kit, 10 Inch, Single Clutch - This Single clutch kit with 10 inch 15 spline spring drive disc E8NN7550FA, 10 inch single pressure plate NDA7563A, pilot bearing C5NN7600A and release bearing C0NN7580A, includes pilot tool. For tractor models with 4 or 5 speed transmission. Tractors: 600, 601, 700, 800, 900, 1841, 2000, 4000 (1953 to 1957). Fingers do not have counter-weights. (Part No: NDA7563AK)
$100.05

Clutch Kit, 9 Inch, Single Clutch - This 9 inch clutch kit contains 10 spline spring drive disc part number NAA7550A, 9 inch single pressure plate part number 8N7563, pilot bearing part number C5NN7600A, release bearing part number C0NN7580A, and alignment tool. Fits 1800, 1801, 2000 (4 cylinder 1962-1964), 2031, 2110TR, 2120, 2130, 2131, 4000 (4 cylinder 1962-1964), 4031, 4110TR, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2N, 8N, 9N, NAA, NAB. (Part No: 8N7563K)
$82.80

Clutch Release Fork - This Clutch Release Fork is used in Ford Tractors with 5 speed transmissions and live PTO. 1958-1964 (Part No: 311649)
$86.91

Clutch Shaft Bushing - 7/8 inch inside diameter. For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (3 or 4 Speed Transmission only). Minimum order quantity is 2. (Part No: 407508A)
$6.15

Friction Disc - 5.85 inch outside diameter, 52 Teeth. For tractor models 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 4000 (1962-1964), 4110, 501, 541, 601, 611, 620, 621, 630, 641, 651, 661, 671, 681, 701, 741, 771, 801, 811, 821, 841, 850, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981. (Part No: PBB77519A)
$15.62

Pilot Bearing - For tractor models 8N, 9N, 2N, NAA, NAB, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, Dexta, Super Dexta, Major, Power Major, Super Major. (Part No: C5NN7600A)
$1.97

Pressure Plate, 10 Inch, Single Clutch, New - For tractor models 1800 series, (2000, 4000 4 cylinder 1962-1964), 2120, 2130, 4120, 4130, 4140, 501, 600, 601, 700, 701, 800, 801, 900, NAA, Jubilee. (Part No: B8NN7563A)
$68.93

Release Bearing - For Ford Tractors with 9 inch and 10 inch single clutch 1939-1964. Inside diameter 2.0625 inches, outside diameter 3.515 inches, width .840 inches. Replaces 78-7580A, 787580A, 787580A8, C0NN7580A. (Part No: N1087)
$12.33

Release Bearing Hub - Dimension A = 1.75 inches, B = 2.05 inches, C = 2.80 inches. Fits 601, 701, 801, 901, 2000, 4000. All up to 1965. 5 speed transmission with SINGLE clutch (serial number 14256 and greater). (Part No: 311259)
$31.92

Release Bearing Hub - For tractor models: 1801, 1821, 1841, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 600, 601, 700, 701, 800, 801, 900, 901, 2N, 8N, 9N, NAA, Jubilee, NAB. (Part No: 9N7561)
$38.43

Release Bearing Hub - Dimension A = 2.10 inches, B = 2.48 inches, C = 1.91 inches. For tractor models: 601, 701, 801, 901, 2000, 4000 (DOUBLE CLUTCH, serial number 14256 and up, 1965 and newer). For tractors with 5-speed transmission and double clutch. Replaces OEM number 311260, 86539876. (Part No: S.60599)
$35.63

Release Bearing Spring - This Release Bearing Spring measures .627 inch outside diameter, 4.875 inch overall length and .095 inch wire diameter. For tractor models 8N, 9N, 2N, NAA, Jubilee, 501, 541, 600, 601, 700, 701, 800, 801, 820, 900, 901, 1801, 1821, 1841, (2000, 4000 4-cylinder), 2030, 2031, 2110, 2111, 2130, 2131, 4030, 4040, 4031, 4110, 4121, 4130, 4131, 4140. Two are used per tractor. Sold and priced each. (Part No: 9N7562)
$3.95

Single Clutch Kit - Contains 10 single Pressure Plate NDA7563A, Disc is NCA7550A and measures 10 inch with 10 splines on a 1 3/8 hub. Disc has springs. Also comes with pilot tool, release bearing C0NN7580A and pilot bearing C5NN76500A. For tractor models: 501, 600, 601, 621, 631, 641, 651, 701, 800, 801, 821, 841, 851, 941, 951. (Part No: 1112-5987)
$128.33

Cooling System
Fan Belt - Fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Some of these tractors used more than one type of belt. Verify part number before ordering. (Part No: EAF8577A)
$3.70

Fan Shroud - For tractor models: NAA, Jubilee, 501, 541, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110, 2111, 2120, 4000, 4110, 4120, 4121 all before 1965. Fan Shroud, Metal. (Part No: NCA8146A)
$65.01

Fan Shroud Hardware Kit - This Screw and washer kit is used for mounting fan shrouds on Ford Tractors, 1939-1964 (Part No: 357622-K)
$1.95

Gasket, pump cover plate - All 4-cylinders 1953-1964. Price is for each. (Part No: EAF8507B)
$1.73

Radiator - Radiator assembly, 3 rows of tubes, stamped steel inlets and outlets with no cap. Tractors: NAA, 500, 501, 600, 800, 900, 2000, 4000 thru 1964, except HD ind. and fork lift. Also 172 inch, 192 inch power units. Replaces NCA8005B, C and NDA8005B. Height: 17 inches. Width: 15-1/4 inches. (Part No: C5NN8005ABECON)
$186.30

Radiator Cap - Cap, radiator, 4 psi. For tractor models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, series with 4 cylinder gas and diesel (1953 to 1964) except Majors. (Part No: 1T8100A2)
$9.25

Radiator Hose Set - Used with 4 cylinder 134-172 GAS engine. Includes upper and lower hose. 312588 lower and NAA8260B upper for: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 MANUAL steering only). (Part No: 134-172HOSESET)
$8.07

Radiator Hose, Lower - Hose, water pump to radiator lower. Hose is 1 1/2 inch inside diameter. For tractor models 2000, 4000, NAA, 2N, EARLY 8N, 9N, 501, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: 312588)
$5.13

Radiator Mounting Bolt Kit - These Radiator Mounting bolts are used on aftermarket radiators to mount the radiator to the front support. Kit includes 2 carriage bolts, 2 nuts, 2 lock washers and 2 washers. For tractor models: 2000 4 cylinder, 2N, 4000 4 cylinder, 8N, 9N, Golden Jubilee, Jubilee, NAA, NAB, 600, 601, 800, 801, 2030, 2031, 2120, 2130, 2131, 4030, 4031, 4120, 4121, 4130, 4131 4 cylinder. Replaces nut 34670, 34090S, Flat Washer 44732, Lock Washer 34808, Carriage Bolt 351655S8. (Part No: 351641S8)
$4.13

Radiator Mounting Pads - These Radiator Mounting Pads are sold in a package of 2. Price is for a package of 2 pieces. For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4600, 5600, 6600, 7600, 6700, 7700, 2310, 2610, 3610, 3910, 4610, 5610, 6610, 7610, 6710, 7710, 7810, 8010. Replaces B9NN8125A, 81811605 and C5NN8125A. Two are used per tractor on the bottom of the radiator. (Part No: 180705M1)
$3.69

Thermostat - This thermostat is 160 degree lo-temp with gasket. For gas engines 1953 to 1964. (Part No: EAF8575BWG)
$9.53

Thermostat Housing - For tractor models NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Gasket available as part number EAF8255A, request in comments section of order form. (Part No: 310031)
$45.13

Water Pump - uses Bolt-On Pulley - Does not come with pulley. For tractor models 600, 601, 700, 701, 800, 801, 900, 2000, 4000 - 172 inch industrial gas and diesel engines (Part No: DCPN8501A)
$45.46

Water Pump - with Press-On Pulley - OEM CDPN8501C. With pulley for tractor models 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 - gas and diesel engines. Comes with rear cover plate and gasket. For tractor models with press on pulley. USES 3 BLADE FAN PART number NCA8600S. Uses 4 1/4 inch mounting bolts on a 3 1/4 inch circle. (Part No: S.60627)
$48.29

Water Pump Kit - Repair kit. For Water Pump CDPN8501C used on 4 cylinder gas engines on models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. Kit includes gasket and all parts necessary to rebuild pump. Replaces all moving parts. Replaces FPN8591A. (Part No: CPN8591B)
$51.05

Water Pump Sealant - RTV Blue 3.35 oz. tube. (Part No: PRM77BR)
$6.29

Decals and Emblems
Decal Set - Complete decal set for models 801, 841, 851, 861. Set contains decals for: fuel cap warning, dual valve, battery, air cleaner, draft control, upper link, PTO warning, fender script (2), hood side (2 red powermaster), numbers inserts 801, 841, 851, 861, (2 each black), service decal for under fuel door, instructions. (Part No: D8015862)
$68.93

Decal Set, PowerMaster - For the Ford 801 Power Master. Set of 2 self-adhesive decals. (Part No: R4126)
$24.75

Decal Set, Select O Speed - For the Ford 801 Select O Speed. Set of 2 self-adhesive decals. Photo is dim because decals have masking that is removed at installation. (Part No: FO801)
$31.49

Front Emblem - Restoration quality with studs & retaining clips. Chrome, gold and red. For tractor models 801, 901 (58-62) (Part No: 311232)
$79.46

Hood Emblem - Restoration quality with studs and retaining clips. For tractor models NAA (not Jubilee), 501, 601, 701, 801, 861, 901, 1801, 2031, 4030, 4031, 4040, 4140. Chrome, Gold and red. (Part No: 311231)
$57.20

Drive Train
3rd Gear - This is 3rd Gear in a 5 Speed Transmission, 1958 and up. It replaces original part number NDA7137A (Part No: NDA7137A)
$165.78

Axle Rear Collar - For tractor models 600, 800, 601, 801, 2000, 4000. (Part No: NCA4132A)
$13.48

Bearing Cone - Bearing cone, differential bearing. For tractor models 4120, 800, 801. (Part No: NDA4221A)
$28.00

Bearing Cone, Rear Pinion - Bearing, Tapered Cone, rear pinion. (Part No: NCA4630A)
$69.39

Bearing Cone, Rear Pinion - Bearing, Tapered Cone, Rear Pinion. (Part No: NDA4630A)
$63.74

Bearing Cup - Bearing cup, differential bearing. For tractor models 800, 801, 4000, 2000. (Part No: NDA4222A)
$23.62

Bearing Cup - Bearing, Tapered Cup<>Rear Pinion Cup. For tractor models 3500, 4120, 800, 801. (Part No: NDA4628A)
$13.08

Bearing Cup - Bearing, Tapered Cup<>Rear Pinion Cup. For tractor models 2120, 4120, 600, 601, 800, 801. (Part No: TBAA4628A)
$37.52

Differential Front Pinion Bearing Cup - For tractor models 2120, 3500, 4120, 600, 601, 800, 801. (Part No: NCA4616A)
$8.56

Differential Pinion Front Cone - Fits 2120 with 4 SP. TRANS. SN54166> (1958-62), 5 SP. SN106116> (1960-64), 3500 (1965-1972), 4120 with 4 SP. TRANS. SN54166> (1959>), 5 SP. SN106115> (1959>), 600 with 4 SPEED TRANS. SN<54165 (1958), 5 SPEED SN<196155 (1959), 601 with 4 SP. TRANS. SN54166> (1958-62), 5 SP. SN106116> (1960-64), 800 with 4 SP. TRANS. SN<54166 (1958), 5 SP. SN<106115 (1960), 801 with 4 SP. TRANS. SN54166> (1959>), 5 SP. SN106115> (1959>) (Part No: D1NN4N028A)
$48.89

Differential Pinion Pilot Bearing - For tractor models 2N (1939-1952), 4120 with 4 SP. TRANS. SN# 54166> - 1959>, 5 SP. SN# 106115> - 1959>, 800 with 4 SP. TRANS. SN# <54166 - 1958, 5 SP. SN# <106115 - 1960, 801 with 4 SP. TRANS. SN54166> - 1959>, 5 SP. SN# 106115> - 1959>, 8N (1939-1952), 9N (1939-1952) (Part No: BB4625B)
$70.02

Differential Pinion Seal - For tractor models (2120 with 4 speed trans SN# 54166 and up, 5 speed SN# 106116 and up), (4120 with 4 speed trans SN# 54166 and up, 5 speed 106115 and up), (600 with 4 speed trans SN# 54165 and below, 5 speed SN# 196155 and below), (601 with 4 speed trans SN# 54166 and up, 5 speed SN# 106116 and up), (800 with 4 speed trans SN# 54166 and below, 5 speed trans SN# 106115 and below), (801 with 4 speed trans SN# 54166 and up 5 speed trans SN# 106115 and up). (Part No: 312356)
$7.50

Gear Shaft, Reverse Idler - Reverse Idler Gear Shaft. For tractor models 2000, 2120, 2130, 2131, 4000, 4120, 4121, 4130, 4131, 4140, 600, 601, 650, 651, 660, 661, 800, 801, 820, 821, 850, 851, 860, 861, 900, 901, 950, 951, 960, 961. (Part No: NDA7140A)
$43.55

Gear Shift Lever Spring - Fits the tractors with 3 or 4 speed transmission or 4 speed torque converter transmission, 2.210 inches tall, 1.768 inch tapers to 1.003 inch outside diameter, 0.140 inch wire diameter. For tractor models NAA, Jubilee, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 820, 821, 840, 841, 900, 901, 940, 941, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 4000, 4030, 4031, 4040, 4110, 4121, 4130, 4131, (4140 4-cylinder), 4140. (Part No: 9N7227B)
$5.95

Gear Shift Lever, with Knob, 4-Speed Transmission - Replaces NAA7209A and 8N7209C shift levers. This newer version has 5/16" UNF thread for the shift knob (knob included) The early series 3/8 shaft is no longer available. Note: uses gear shift knob BB7213A. Fits 8N, NAA, Jubilee, 600, 700, 800, 900, 620, 621, 630, 631, 640, 641, 740, 741, 840, 841. (Part No: C5NN7202B)
$72.62

Gear, 1st, 4 Speed Transmission - 60/28 tooth. For tractor models 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Part No: 8N7100)
$234.14

Gear, 3rd, 4 Speed Transmission - 52 tooth. For tractor models 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4040, 4120, 4130, 4131, 4140, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, NAA, NAB. All with 4 speed transmissions. (Part No: 8N7102)
$211.66

Gear, 4th, 4 Speed Transmission - Has 28 and 36 teeth. For tractor models 1801, 2000, 2030, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Part No: 8N7112)
$190.08

Gear, Mainshaft 2nd - Transmission mainshaft 2nd gear. 56 teeth. For NAA, Jubilee, all 4-speed Ford transmissions (1955-64), 8N, 4-speed transmission, 1948-52. (Part No: B9NN7A381B)
$113.38

Input Shaft - This is an input shaft used on Sherman Step-Up / Step-Down (Hi Low) gear boxes. It is 8 inches long. Used on Ford Tractors 1955-1964. It replaces original part number C3NN7015D (Part No: C3NN7015D)
$205.32

Input Shaft - 4 Speed, 15 Spline, 17 inch overall length. For tractor models 1801, 1821, 1841, 2000 series, 2030, 2111, 2120, 2130, 2131, 4000 series, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 700, 701, 800, 801. (Part No: 311203)
$169.56

Input Shaft Tube - This Tube is used in 4 speed transmissions, Ford 4 Cylinder Tractors 1958-1964. Replaces original part numbers 311202, 311212. (Part No: 311202)
$212.92

PTO Countershaft - This PTO Countershaft is used in 5 speed transmissions 1955-1964. (Part No: NDA701B)
$228.14

PTO Input Shaft - This PTO input shaft is used on 5 Speed Transmissions with Live PTO. Used 1958 and later. 7 13/16 inches Long. Replaces original part number 311249 (Part No: 311249)
$136.21

Sherman Transmission External Lever - Step Up/Step Down lever. For Tractors with Sherman transmission. Replaces 10A909, 9N7210. For models 9N, 2N, 8N, NAA, Jubilee, 600, 601, 500, 501, 700, 701, 800, 801, 900 and 901. (Part No: 9N7210)
$67.01

Shift Knob - Knob, transmission gear-shift lever. For all 4 and 5 speed transmissions models (1950-1964 serial number 252844 and up). (Part No: BB7213A)
$3.08

Shifter Boot - Bottom hole is 7/8 inch diameter. For 9N, 2N, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (ALL 1939 TO 1964 WITH 4 SPEED). Gearshift Boot - Restoration Quality. Can be used to replace 9N7277. (Part No: C5NN7277C)
$2.03

Side Cover Gasket - This side cover gasket fits the following tractor models as a side cover gasket and a PTO shifter cover gasket: 2000, 4000, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, and NAA. Price is for each. Replaces part number 9N4131. (Part No: 9N4131)
$.38

Electrical System
12 Volt Conversion Kit - For 4 cylinder gas engines on 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, all pre 1965. Not for industrial or diesel tractors. Includes rebuilt unicharge alternator with pulley, internal self exciting regulator, brackets, wiring harness and instructions. Updates older 6-volt tractors to 12-volt charging system. Does not contain coil as the ignition system remains at 6 volts. If your proofmeter is driven off your generator, this alternator does NOT have tach drive. (Part No: 5564-10300ALT)
$96.60

Alternator Bracket, Base - Base alternator bracket. For NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 2000, 4000. All 1953-1964. (Part No: NAA10302)
$10.43

Battery Cable - Cable, battery to starter switch, 12-volt, 12-1/2 inches. For tractor models 2000, 4000, 501, 601, 701, 801, 901. (Part No: D1NN14300F)
$11.80

Battery Hold Down - Used with batteries 16-1/4" long x 7-5/8" wide. For tractor models (501, 601, 701, 801, 901 all with 4 cylinder engines from 1958 and up with 12 volt systems). (Part No: 311099)
$26.94

Cable Clip - This Battery Cable Clip holds the solenoid-to-starter cable to the air cleaner tube. It fits a 1 - 5/8 inch Air Cleaner Tube. Used on Ford Tractors, 1953 to 1964. (Part No: 1A13377A)
$2.95

Coil - Six Volt - This ignition coil is an exact replica of the original used in Ford Tractors, 1950-1964. It replaces: 8BA12029, D0PF12029A, D3PF12029AA, E8T12029BA. (Part No: 8BA12029)
$29.95

Coil, Ignition 12V - Ignition coil. This coil is used with an external resistor if needed. There is zero resistance in the coil. (Part No: D8JL12029A)
$13.61

Condenser - For NAA, NAB, Jubilee, 8N with side mount distributor only, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901), (2000, 4000 ALL <1964). (Part No: FET12300A)
$2.08

Distributor - With 12 Tooth Helican Gear For Ford with 4 Cylinder Gas Engine, 1955-1964, with hex shaped shaft. Comes with points and cap. Replaces 311185. Can Use Pertronix electronic ignition number 1244A if desired. (Part No: FDN12127A)
$193.13

Distributor Bushing - This Distributor Bushing is used on Ford tractors 1953-1964. Brass, measures 0.470 inch inside diameter x 0.596 inch outside diameter x 0.88 inches long. Replaces original part number 7RA12132A. (Part No: 7RA12132A)
$4.95

Distributor Bushing and Shim Kit - Distributor Bushing and Shim Kit. Fits tractor models all 1953 to 1964: 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, [ 2110, 2120, 4030, 4110, 4130, 4140 4-cylinder ], 2111, 2121, 2130, 2131, 4000 4 cylinder, 4031, 4040, 4120, 4121, 4131, 501, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, NAA, NAB. Replaces: Roll pin: 60132, Bushing: 7RA12132A, Thrust washer: FAA12179A, Seal: 12476, D8NN12A118AA, O-ring: 87055, 134372. This is a 5-piece kit. NOTE: Bushing must be sized to the shaft after installation. (Part No: FDS3253)
$31.50

Distributor Cap Hold Down Clip - This Distributor Cap Clip is used on Ford Tractors 1950-1664 with side mounted distributor. Two used per tractor. Sold individually. Uses B12145 distributor clamp rivet, not included. Replaces 7RA12144 (Part No: 7RA12144)
$3.95

Distributor Cap, Clip Held - Fits Tractors: 8N serial number 263844 (Side mount), Jubilee, NAA, 501, 600, 601, 700, 800, 801, 900, 901, 2000, 4000 Series (4 Cylinder). (Part No: NCA12106A)
$7.98

Distributor Clamp Rivet - This distributor clamp rivet is used to secure part number 7RA12144 to the distributor. Used on Ford tractor models: 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 501, 800, 801, 900, 901, 1801, 2000 and 4000, 1950-1964. It replaces B12145, B-12145. (Part No: B12145)
$0.95

Distributor Point Set, 4-Cylinder - For FDN12127A and 311185 distributor used on NAA, NAB, Jubilee, 8N with side mount distributor only, 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). (Part No: D8NN12171AA)
$4.53

Distributor Power Inlet Screw Kit - This kit contains 350032S screw, 7RA12234 insulator, 7RA12233 bushing, # 10 flat washer and 2 10-32 nuts. This kit is used in conjunction with 8N12209 Primary Conductor, not included. It is used on Ford 8N serial number above 263843, NAA, Jubilee, 600, 601, 501, 700, 701, 800, 801, 900, 901, 2000, 4000, 6000 and 1801 produced 1950-1964. (Part No: 350032-KIT)
$4.95

Distributor Primary Conductor - Copper. Screw and insulator kit are available separately as part number 350032-KIT. Fits tractor models: Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1881, 2000 4 cylinder, 2030, 2031, 2111, 2130, 2131, 4000 4 cylinder, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 4 cylinder gas, LP thru 1964. 8N serial number 263844 and up 1950-1952 with side mounted distributor. Replaces: 8N12209. (Part No: 8N12209)
$4.50

Distributor Rotor, Side Mount Distributor - 4-Cylinder. Fits the following gas tractors up to 1964: 8N with side mount distributor, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: C0NN12200A)
$3.08

Distributor, Breaker Plate - 4 Cylinder. Breaker plate with points and condenser. For NAA, NAB, Jubilee, 8N with side mount distributor only, 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). (Part No: FAD12152A)
$42.77

Distributor, Rebuilt - Complete remanufactured distributor for Ford with 4 Cylinder Gas Engine, 1955-1964, with hex shaped shaft. Replaces FDN12127A and 311185. A refundable $80.00 core charge will be added to your invoice. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Also NOTE: Note that if the core is not a complete and good core, part or all of the core charge will not be refunded. Typically, most cores need a shaft replacement and the cost of the shaft will be deducted from the core charge. This is usually $30 (Part No: FDN12127AR)
$174.41

Electronic Ignition Conversion Kit - 6V Negative Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series) 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt negative ground only. (Part No: 1244AN6)
$103.28

Electronic Ignition Conversion Kit, 12V Negative Ground - Pertronix Electronic Ignition kit for the following tractors using 4-cylinder gas engine: 8N (using side mount distributor), NAA, Jubilee, (501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000. And for the following tractors using 172 4-cylinder gas engine: 800, 900, 801, 901, 4000. This electronic module by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1244A)
$93.61

Electronic Ignition Conversion Kit, 12V Positive Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt positive ground only. (Part No: 1244AP12)
$103.28

Electronic Ignition Conversion Kit, 6V Positive Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Part No: 1244AP6)
$103.28

Generator, 6 Volt without Pulley - This 6 volt generator was used on models 1800 Series, 2000 (4 cylinder 1962-1964), 2030, 2120, 2130, 4000 (4 cylinder 1962-1964), 4030, 4040, 4110TR, 4120, 4121, 4130, 4131, 4140, 501 SERIES, 600, 601 SERIES, 701 SERIES, 800, 801 SERIES, 900, 901, 6000. Uses FAG10505A regulator. Add $50.00 refundable core charge. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: C4NN10002A)
$262.74

Generator, Less Pulley & Tach Drive - New LUCAS type generator 12 volt, 22 amp, 1965-1975. 2000, 3000, 4000, 5000 Gas and Diesel. (620, 622 1967-1974). (7000 1971-1975 with 4-256). 1968 All 8000, 9000 series (up to 12/1969). INDUSTRIALS: 2110LCG, 3400, 3500, 3550, 4110LCG, 4400, 4500. LESS pulley and tach drive. Pulley is available (see part number C5NF10196B). Tach Drive available (see part number C5NF17B282B). Replaces Lucas 22756, C4NN10002B, C9NN100001, 3109419R91, C5NG10000E, C7NN10000A, C4NN10002B. The Generator can also be used as a 12 volt generator on 1955-1965 4 cylinder tractors. (Part No: C7NN10000C)
$75.83

Ignition Kit With Rotor - 4 Cylinder - Ignition kit contains: points, rotor, condensor. For 8N (LATE - with side mounted distributor), And 4 cylinder Ford Tractors from 1950 to 1964 . Also for TISCO 8N12127-WCR distributor. Replaces ATK7FAR, CPN12000A, C0NN12200A (Part No: ATK7FAR)
$6.96

Ignition Tune-Up Kit And Maintenance Kit - FOR 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, 1950 thru 1964. Comprehensive Kit includes: Universal spark plug wire set, distributor cap, heavy duty point set, condenser, heavy duty rotor, spark plugs, oil filter CPN6731B, fuel sediment bowl assembly, and fuel filter, in-line, 5/16 inch . (Part No: TUNEKITMAINT)
$58.77

Key Switch - For all Fords 1939 through 1964 except Dexta and Fordson Major with 3/4 inch hole. Keyed ignition switch comes with 2 keys. (Part No: 8N3679C)
$5.99

Resistor - For 8N, 9N, 2N, and 4 cylinder engines on 600 - 4000 tractors 1955-1964. Used in ignition system with 12-volt square coil, resistance = .6 ohms. (Part No: 8NE10306)
$2.98

Spark Plug - For 8N, 9N, 2N, NAA, NAB, Jubilee, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL before 1964). SPARK PLUG. Price is for EACH. Minimum Order is 4. Replaces Autolite AL437, AL82, Bosch WR9FC and Champion H14Y and H18Y. (Part No: AL437)
$1.91

Spark Plug Wire Set, Custom, 4 Cyl. - For tractor models before 1965, 4 Cylinder, 90 degree boot, for 134 and 172 Gas Engines. Boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259CUSTOM)
$10.88

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259)
$10.49

Starter Boot - Rubber cover, starter switch terminal cover. Tractors {1948-1958}. (Part No: 8N11113)
$4.50

Starter Drive - Drive assembly. For tractor models: 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Part No: C1AF11350A)
$23.93

Starter Post Kit - This kit replaces the wire post on Ford Starters, 1939-1964. Replaces C7NF11102A, 1811107B, 86512984, 6810044 (Part No: A9AZ11102B)
$6.26

Starter Solenoid, 12-Volt - Relay Assembly, 12 Volt, 4 Terminal. For most 12 Volt GAS Models 1958-1964 including: Jubilee, 501, 541, 600, 601, 611, 620, 621, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB, 2000, 2030, 2031, 2110, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4140. Replaces 311007FR. (Part No: 311006)
$5.40

Starter Solenoid, 6 Volt - This is a 4 post, 6 volt starter solenoid relay assembly. It has a flat mount. It replaces part numbers 311007FRGV, A604595, 311007, SW217, 311007FR. (Part No: 311007)
$12.14

Starter with Drive - This 3 bolt starter performs in 6 volt and 12 volt applications. Comes with drive, clockwise rotation. For 134, 144, 172, 192 4 Cylinder Gas Or Diesel, 6 Or 12 Volt Systems 1952 through 1964. Replaces: C3NF11001B, C3NF11002D, C3NF11002E. (Part No: C3NF1100D)
$110.33

Switch, Push Button - Fits 2000, 4000, 601, 701, 801, 901. All 4 Cylinder, Pre 1965 with select-o-speed transmission or diesel engine. Replaces 312133. (Part No: 189158M91)
$8.56

Tune Kit, Basic - This basic ignition tune kit is for 4 cylinder gas tractor models NAA, NAB, Jubilee, 8N with side mount distributor only, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). Tune up kit, Autolite. Kit contains: D8NN12171AA point set, FET12300A condenser, CONN12200A rotor and spark plugs. (Part No: 309787)
$15.71

Tune Kit, Comprehensive - This Comprehensive Tune Kit is for 4 cylinder gas models 8N (serial number 263844 and up), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, 1950 thru 1964. (4 Cylinder Gas Engines). Comprehensive Tune-Up Kit includes: Universal spark plug wire set, distributor cap, heavy duty point set, condenser, heavy duty rotor, and spark plugs. (For use with original equipment distributors). (Part No: TUNEKIT)
$32.46

Voltage Regulator, 12 Volt - For tractor models: NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Jubilee. All 1953-1964. (Part No: C0NF10505A)
$22.01

Wiring Harness, 12 Volt Conversion - For tractor models NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, 601, 701, 801, 901. All 1953-1964. (Part No: NAA10301)
$17.93

Wiring Harness, 12 Volt System - Ignition wiring harness is for tractors made from 1958-1964 with an original 12 volt system. 2000 <1964, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4000 <1964, 4030, 4031, 4040, 4110, 4120, 4121, 4131, 4140, 501, 601, 701, 801, 901. Main Wiring Harness 1958 thru 1964 with original 12 volt system. (Part No: 311043)
$18.75

Wiring Harness, 6 Volt System - Ignition wiring harness. For gas and diesel for 2000, 4000, 501, 601, 701, 801, 901. 6 volt systems 1958 to 1964. (Part No: 310996)
$18.75

Engine Bearings
Main Bearing Set, 134, 144, 172 Engines, .010 - For 134 144 and 172 4-cylinder Gas or Diesel engines (.010 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both PRE 1965). (Part No: MBK134172-010)
$38.40

Main Bearing Set, 134, 144, 172 Engines, .020 - For 134, 144 and 172 4-cylinder Gas or Diesel engines (.020 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: MBK134172-020)
$50.34

Main Bearing Set, 134, 144, 172 Engines, .030 - For 134, 144 and 172 4-cylinder Gas or Diesel engines. (.030 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: MBK134172-030)
$38.40

Main Bearing Set, 134, 144, 172 Engines, .040 - For 134, 144 and 172 4-cylinder Gas or Diesel engines. (.040 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: MBK134172-040)
$38.40

Main Bearing Set, 134, 144, 172 Engines, STD - For 134, 144 and 172 4-cylinder Gas or Diesel engines. (STD Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: MBK134172-STD)
$50.34

Piston Pin Bushing - Sold in multiples of 4, priced individually. For tractor models NAA, Jubilee, (2000 prior to 1964), 500, 600, 700, (4000 gas from 1962-1964), (800, 900 1955-57), (801, 901 gas 1958-1962). (Part No: EAA6207A)
$3.08

Rod Bearing Pair, .001 - Rod Bearing Pair for 1 cylinder. .001 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Part No: 312101-PAIR)
$18.75

Rod Bearing Pair, .002 - Rod Bearing Pair for 1 cylinder. .002 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Part No: 312102-PAIR)
$14.80

Rod Bearing Pair, .010 - Rod Bearing Pair for 1 cylinder. .010 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Part No: 312103-PAIR)
$8.75

Rod Bearing Pair, .020 - Rod Bearing Pair for 1 cylinder. .020 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Part No: 312104-PAIR)
$9.00

Rod Bearing Pair, .030 - Rod Bearing Pair for 1 cylinder. .030 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Part No: C0NN6211B-PAIR)
$7.13

Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .010 - For 134 and 172 4-cylinder GAS or Diesel and 144 diesel engines, (.010 size). 1 kit used per engine. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: CRK312103-010)
$34.42

Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .020 - For 134 and 172 4-cylinder gas or diesel and 144 diesel engines (.020 size). 1 kit used per engine. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: CRK312104-020)
$35.61

Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .030 - For 134 and 172 4-cylinder gas or diesel and 144 diesel engines, (.030 size). 1 kit used per engine. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: CRK312026-030)
$38.13

Rod Bearing Set, 134, 144 and 172 Gas or Diesel, STD - With journals measuring 2.298 inches. For 134 and 172 4-cylinder GAS or Diesel and 144 diesel engines, (STD size). 1 kit used per engine. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: CRK312026-STD)
$34.32

Engine Gaskets
Crankshaft Seal Kit, Rear - This Improved Rear Crankshaft Seal Kit includes detailed instructions. Fits Ford tractors with 134, 172 or 144 Gas, LP or Diesel engines. Golden Jubilee, Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4 cylinder, 4000 4 cylinder. 6000 6 cylinder. Through 1964. Replaces: 84186689, B3NN6336A, C0NN6336A, C0NN6701A, EBU6701A. (Part No: C0NN6701AKIT)
$27.75

Crankshaft Seal, Front - This front crankshaft seal is for the following models: 2000 and 4000 (before 1964), 600, 601, 700, 701, 800, 801, 900, 901. Used on 134, 144, 172, 192 4-cylinder, 223, 242 cubic inch gas, LP and diesel engines. C0NN6700A, EAA6700B, EAF6700B. (Part No: EAA6700B)
$4.86

Crankshaft Seal, Rear - Comes in Halves. 2 needed for complete seal. Min order qty is 2. Fits 134 CID, 172 CID gas and 175 CID diesel engines. For tractor models 2000 up to 1964, 4000 1962 to 1964, 500, 600, 700 Series, 800 Series 1955 to 1957, 801 Series 1958 to 1962, 900 Series 1955 to 1957, 901 Series 1958 to 1962, NAA, Jubilee. ***Minimum order is 2*** (Part No: C0NN6701A)
$8.47

Head Gasket 134/172 Gas - Head gasket, non-metallic used with 1/2 inch or 7/16 inch head bolt holes. For tractor models: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 2000 up thru 1964, 4000 up thru 1964. (Part No: EAF6051D)
$21.58

Head Gasket Kit, 172 Diesel - For tractor models 4000, 801, 901.(Upper gasket set with head gasket). (Part No: VG172D)
$36.03

Head Gasket, 172 Diesel - Head gasket. For 4000, 801, 901. (Part No: 310662)
$28.14

Oil Pan Gasket - Fits 134 gas and 172 gas and diesel engines in: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. (Part No: EAF6710B)
$3.96

Overhaul Gasket Set Less Head Gasket 134/172 Gas - Comes with rear main seal. For tractor models: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. Does NOT include Head Gasket. (Part No: CPN-FPN)
$39.41

Overhaul Gasket Set, 172 Diesel - For tractor models 801, 901; 1958 and up, 4000 up to 1964. Overhaul Gasket Kit. (Part No: 172-6008D)
$83.04

Overhaul Gasket Set, 172 Diesel - Complete gasket set includes seals. For 172 diesel in 801, 901, (4000 1964 only). (Part No: 3A50FS)
$112.67

Overhaul Gasket Set, 172 Gas - For 800, 900, 801, 901, 4000; 172 CID gas 1963 to 1964. Overhaul Gasket kit for engine heads that use 7/16 inch head bolts. Includes crankshaft seals. (Part No: FPN6008B)
$52.85

Overhaul Gasket Set, 172 Gas - For tractor models: 800, 801, 900, 901; 172 CID Gas 1958 and up, 4000 to 1964. Overhaul Gasket Kit for engine heads that use 1/2 inch head bolts. Includes with crankshaft seals. (Part No: FPN6008B1)
$57.82

Push Rod Side Cover Gasket - For all 4 cylinder gas or diesel models built between 1953-1964. (Part No: EAF6521D)
$6.02

Pushrod Side Cover Grommets - Pushrod Side Cover Grommets have a minimum order of Three. Three used per tractor. PRICED INDIVIDUALLY. MUST ORDER 3. Fits Ford 4 cylinder gas, LP and diesel 1953 thru 1964. Replaces original part numbers C0NN6589A and EAF6589A (Part No: C0NN6589A)
$1.46

Timing Gear Front Cover Gasket - For tractor models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. All gas or diesel 1953 to 1964. (Part No: EAF6020B)
$1.79

Upper Gasket Set, 172 Gas - For tractor models 800, 801, 900, 901, 4000; 172 CID gas 1963 to 1964. Overhaul Gasket kit with 1/2 inch head bolts. (Part No: VGFPN1)
$66.89

Upper Gasket Set, 172 Gas - Upper engine gasket kit. Kit includes EAF6051D, EAF6584C, C0NN9448C. For tractor models 800, 900, 801, 901, 4000 1963-1964 with 7/16 inch head bolts. (Part No: VGFPN)
$42.13

Valve Cover Gasket - For tractor models 4000, 801, 901. All Diesel before 1964. Priced Each. (Part No: 311321)
$18.13

Valve Cover Stud Grommet - This Valve Cover Stud Grommet is used on Ford 4 Cylinder tractors built from 1953-1964. Two used per tractor. Sold individually. Replaces: EAF6570A (Part No: EAF6570A)
$2.40

Engine Rebuild Kits
Basic In Frame Overhaul Kit, 172 Diesel - Made by TISCO. Basic in-frame kit for 172 CID 4 Cylinder diesel engine 3.9 inch standard bore. Kit includes Sleeves, pistons, rings, pins, retainers, valve grind gasket kit, oil pan gasket. For tractor models (4000 1963-1964), 801, 901. (Part No: BIFF20)
$545.47

Basic In Frame Overhaul Kit, 172 Gas, Overbore with Metal Head Gasket - Made by TISCO. For tractor models 800, 900, 801, 901, (4000 1963-1964) with 172 inch CID 4 cylinder gas engine with a standard bore of 3.9 inch. Contains Super power set overbore to 4.0 inch, PK109 sleeve and piston kit with rings, pins and retainers, upper gasket set, and oil pan gasket. (Part No: BIFF109M)
$370.52

Basic In Frame Overhaul Kit, 172 Gas, Overbore with Non Metal Head Gasket - Made by TISCO. For tractor models 800, 801, 900, 901, (4000 1963-1964). All with 172 inch CID 4 cylinder gas engine standard bore of 3.9 inch. Kit contains Super power set overbore to 4.0 inch. Contains: PK109 sleeve and piston kit with rings, pins and retainers, VGFPN1 valve grinding gasket kit, EAF6710B crankcase oil pan gasket. (Part No: BIFF109)
$392.67

Basic In Frame Overhaul Kit, 172 Gas, with Metal Head Gasket - Made by TISCO. 172 CID 4 cylinder gas 3.9 inch standard bore. Kit contains METAL head gasket with upper gasket set, sleeves, pistons, rings, pins and retainers, oil pan gasket. Bearings are available, must order separately. For tractor models 4000 (1963-1964), 800, 801, 900, 901. (Part No: BIFF115AM)
$292.30

Basic In Frame Overhaul Kit, 172 Gas, with Non Metal Head Gasket - Made by TISCO. 172 CID 4 cylinder gas 3.9 inch standard bore. Kit contains, sleeves, pistons, rings, pins and retainers, NON-METAL head gasket with upper gasket kit, oil pan gasket. Bearings are available, must be ordered separately. For tractor models 4000 (1963-1964), 800, 801, 900, 901. (Part No: BIFF115A)
$310.84

Basic Overhaul Kit, 172 Diesel - Made by TISCO. 172 CID 4 cylinder diesel 3.9 inch standard bore. Basic engine kit contains, sleeves, pistons, rings, pin and retainers, pin bushings, complete gasket kit. Bearings are available, must be ordered separately. For 4000 (1963-1964), 801, 901. (Part No: BEKF20-LCB)
$605.14

Basic Overhaul Kit, 172 Gas, Overbore - Made by TISCO. 172 CID 4 cylinder gas 4.0 inch overbore. Basic engine kit contains, sleeves, pistons, rings, pins and retainers, pin bushings, complete gasket kit, Less bearings. Engine bearings must be ordered separately. For 4000 (1963-1964), 801, 901, 800, 900. (Part No: BEKF109-LCB)
$399.81

Basic Overhaul Kit, 172 Gas, with Metal Head Gasket - Made by TISCO. 172 CID 4 cylinder gas 3.9 inch standard bore. Basic engine kit contains, metal head gasket, sleeves, pistons, rings, pins snd retainers, pin bushings, complete gasket kit, less bearings. Engine bearings must be ordered separately. For 800, 900, 801, 901, 4000 (1963-1964). (Part No: BEKF115AM-LCB)
$310.00

Basic Overhaul Kit, 172 Gas, with Non Metal Head Gasket - Made by TISCO. 172 CID 4 cylinder gas 3.9 inch standard bore. Basic engine kit contains, sleeves, pistons, rings, pins and retainers, pin bushings, complete gasket set. less bearings. Engine bearings must be ordered separately. For 4000 (1963-1964), 801, 901, 800, 900. (Part No: BEKF115A-LCB)
$316.82

Overhaul Kit, 172 Diesel - 172 CID 4 cylinder diesel 3.9 inch standard bore. Kit contains, sleeves, pistons, rings, pins and retainers, pin bushings, complete gasket kit, intake and exhaust valves, springs, guides, valve keys. Bearings are available, must be ordered separately. For tractor models 801, 901, 4000 (1963-1964). (Part No: 172DK-LCB)
$808.60

Overhaul Kit, 172 Gas - Made by TISCO. Complete overhaul kit. For 800, 801, 900, 901, 4000 (1955-1964). With 172 inch gas engine with 3-ring pistons. Contains sleeve and piston kit (sleeves, pistons, pins, retainers, top chrome and oil control ring set). Basic gasket set. Center, front and rear main bearings. Intake and exhaust valves (plus guides, locks and springs). Available with Std., .010 inch, .020 inch or .030 inch bearings. (Part No: EOK115)
$445.00

Overhaul Kit, 172 Gas - Made by TISCO. Overhaul kit for 800, 801, 900, 901, 4000 (1955-1964). With 4-cylinder 172 gas engine with 3-ring pistons. Contains sleeve and piston kit (sleeves, pistons, pins, retainers, top chrome and oil control ring set). Basic gasket set. Intake and exhaust valves (plus guides, locks and springs). Bearings sold separately. (Part No: EOK115-LCB)
$381.90

Overhaul Kit, Comprehensive, 172 Gas - Made by TISCO. Complete overhaul kit less bearings. For 172 CID 4-cylinder gas engine, 3.9 inch standard bore, with 3-ring Pistons on (1955 to 1964): 800, 801, 900, 901, 4000. Contains complete gasket set, press-on camshaft gear, intake and exhaust valves with guides, locks and springs, oil filter, upper radiator hose, lower radiator hose, air cleaner-to-carb hose, sleeve and piston kit (sleeves, pistons, rings, pins, retainers), oil pump kit, fan belt, carburetor repair kit, spark plug set, point set and condenser. Bearings sold separately. See Engine Bearings. (Part No: 800K-LCB)
$586.75

Rebore Kit, 172 Gas - 3.90 Inch .020 Oversize. For tractor models 800, 900, 4000 with 172 Gas, Non-Sleeved Engine. (Part No: R3337)
$248.40

Valve Overhaul Kit - For servicing one engine when valve replacement is necessary. For DIESEL 801, 901, 4000 (1958 TO 1964). (Part No: VOKF172D)
$156.30

Valve Service Kit - For servicing one engine with valve related parts when only valve refacing is required. Kit contains: springs, key and guides. (Gasket set VGCPNM must be ordered separately). For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1953 TO 1964). (Part No: VSKF134G)
$55.20

Valve Service Kit - For servicing one engine with valve related parts when only valve refacing is required. For 501, 601, 701, 801, 901, 2000, 4000 (1958 TO 1964). Contains: springs, guides, locks, (no valves). (Part No: VSKF172D)
$65.63

Valve Train Kit, 134 CID Gas - For servicing one engine when valve replacement is necessary. Kit contains: valves, springs, keys and guides. (Gasket set VGCPNM must be ordered separately). For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, (1953 TO 1964). (Part No: VOKF134G)
$95.57

Valve Train Kit, 172 CID Diesel - This Valve Train Kit is for the 172 cubic inch diesel engine. The kit includes 4 intake valves, 4 exhaust valves, 8 valve guides, 8 valve keys, 8 valve locks, 8 valve springs. For tractor models 4000, 801, 901 all 1964 and before. (Part No: VTK172)
$150.94

Valve Train Kit, 172 CID Gas - For 172 CID 4 cylinder gas engines. Kit comes with 4 intake valves, 4 exhaust valves, 8 valve guides, 8 valve springs, 8 valve keys, 8 valve locks. Models: 2000 <1964, 4000 1962-1964, (500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840 all 1955-1957), (801, 811, 821, 841, 851, 861, 871, 881 all 1958-1962), (900, 950, 960 all 1955-1957), (901, 941, 951, 961, 971, 981 all 1958-1962). (Part No: VTK143)
$95.57

Engine Parts
Camshaft Hydraulic Pump Drive Gear - For tractor models 2000, 4000, 600, 601, 700, 701, 800, 801, 900, 901, NAA, Jubilee. There are 33 teeth and (4) 5/16 inch bolt holes on this drive gear. Bolts on rear of camshaft with (4) 5/16 inch diameter bolts. NOTE: Early tractors used 1/4 inch bolt holes. Measure before ordering. Also fits New Holland L778 Skid Steer (July 1976 thru July 1980) with 5/16 inch diameter mounting bolts. Fits 134, 172 and 192 CID 4-cylinder gas, LP and diesel engines. Also replaces 500010. This is NOT a Camshaft Timing Gear (See part number EAF6256M ). (Part No: EAF907B)
$49.95

Connecting Rod Bolt - This is a Castle style nut for the Rod Cap on Ford tractors, 1939 to 1964. Replaces C9AZ6212B, 7HA6212, 7HA-6212. Eight used per tractor. Priced each. For models 9N, 8N, 2N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 4000 and 2000. (Part No: 7HA-6212)
$0.95

Crankshaft Pulley - Double groove pulley for 2000 (4 cylinder), 4000 (4 cylinder), 600, 601, 700, 701, 800, 801, 900, 901. Replaces C0NN6351A. (Part No: C0NN6351A)
$65.56

Crankshaft, 4 cyl, Diesel - For 601, 701, 801, 901, 2000, 4000 (Except Majors) 58/64, all with Diesel 4 cylinder engines. Crankshaft, new, not reground. Replaces E2JL6300BA, D9NN6303B. (Part No: E2JL6300BA)
$552.00

Crankshaft, 4cyl Gas - Fits 4 cylinder GAS 134 CID and 172 CID engines on: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Replaces D4JL6300B, C0NN6303J, D1NL6303D, D1NN6300B, D4JL6300B. (Part No: D1NL6303D)
$493.21

Exhaust Valve - For tractor models with 4 cylinder diesels: 501, 601, 701, 801, 901, 2000, 4000. (Part No: 310651)
$16.58

Exhaust Valve Guide - For tractor models with 4 cylinder diesels: 501, 601, 701, 801, 901, 2000, 4000. Price is for EACH. Minimum order quantity is 4. (Part No: EAF6510C)
$5.30

Governor Assembly - This Governor centrifugal assembly, is an improved weight type. Fits Ford gas engines. Tractors: (NAA, 600, 700, 800, 900). (Replaces the flyball type when used with NCA99810A governor compensator rod and spring assembly); 501, 601, 701, 801, 901, 2000 (4 cylinder), 4000 (4 cylinder). (Part No: EAF12470A)
$89.63

Governor Compensating Spring - Mounts between bellcrank and under battery tray, 6.535 overall length, .532 inch outside diameter, .070 inch wire diameter. For tractor models: 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, (2000, 4000 4-cylinder), 2030, 2031, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4120, 4121, 4130, 4140. All from 1954 thru 1964. (Part No: NCA9827A)
$5.69

Governor Shaft Oil Seal - Governor shaft oil seal, for 134 and 172 CID gas engines. Tractors: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1953 to 1964). (Part No: EAF18183B)
$12.81

Intake Valve - For tractor models with 4 cylinder diesels: 501, 601, 701, 2000, 4000, 801, 901. (Part No: 310650)
$10.25

Intake Valve Guide - For tractor models with 4 cylinder diesels: 2000, 4000, 501, 601, 701, 801, 901. Price is for EACH. Minimum order quantity is 4. (Part No: 311411)
$10.96

Lifter - Valve lifter fits 134, 144, and 172 gas and diesel engines. For tractor models: NAA, Jubilee, 1801, 2000, 2100, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. The stem outside diameter is 0.498 inch, the lifter face outside diameter is 1.023 inch and the overall length is 2.409 inch. Replaces 500295, EAA6500C, EAA6500D, F3JL6500AA. (Part No: F3JL6500AA)
$9.95

Push Rod, 5/16 - If replacing 1/4 inch outside diameter push rod, you must also order number 87801302 rocker adjusting screw (not available from YT). For models: [2000 4 cylinder, 4000 4 Cylinder (gas, LP and diesel)], [Jubilee, NAA, NAB, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 6000, 6100 (gas, LP and diesel; 4-cylinder)]. Replaces: 500356, C0AE6565C, EBP6565B, EAA6565C. (Part No: 500356)
$12.00

Starter Flywheel Ring Gear - Fits all models Ford 1939 thru 1964; except Fordson Major and Dexta. This gear has 134 Teeth. Inside diameter is 11.994 inches and outside diameter is 13.552 inches. (Part No: 9N6384)
$20.99

Timing Gear, STD - Standard steel camshaft gear. Outside diameter of 6.125 inches and 42 teeth. For tractor models 2000 <1964, 4000 DIESEL 1964, 4000 GAS 1962-1964, 4000 <1964, 501, 600, 601, 700, 701, 800, 800 1955-1957, 801 DIESEL 1964, 801 GAS 1958-1962, 900, 900 1955-1957, 901 DIESEL 1964, 901 GAS 1958-1962, NAA, Jubilee. (Part No: EAF6256M)
$46.70

Valve Key, Intake & Exhaust - 120 CID 4 cylinder gas engines. NOT for free rotating exhaust valves. Used in 120, 134 and 172 CID 4 Cylinder Gas Engines. Sold as package of 8. Enter quantity 1 for 8 pieces. 16 required per engine (2 packages of 8). Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929, 10A6440, 206880, RP42026D, VT3234. (Part No: 7HA6518)
$2.52

Valve Spring - This valve spring is used on Ford tractors, gas and diesel 1953-1964, 4 cylinder engines. Used for both intake and exhaust. 8 used per engine. Priced and sold individually. Replace original part number EAA6513A. (Part No: EAA6513A)
$1.88

Valve, Exhaust, 172 CID Gas - Exhaust valve for 172 CID Gas engine. Uses EAM6518A lock. NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. Sold in quantities of 4, price is for 1. (Part No: EAF6505D)
$7.94

Valve, Intake, 172 CID Gas - Intake valve for 172 CID Gas engine. Uses 7HA6518 lock. NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. Must order in quantities of 4, price is for 1. (Part No: EBU6507A)
$5.99

Engine Pistons and Sleeves
Piston Kit, Overbore, 172 CID Gas - 4 inch overbore for increased power, autothermic pistons, chrome top rings, chrome steel segment oil rings. For 4000, 800, 801, 900, 901 1963-1964. (Part No: PK109)
$352.51

Piston Sleeve, 172 Gas or Diesel Engine - Standard sleeve with 3.9 inch bore, (4.1 inch outside diameter, press fit) for 172 CID gas or diesel engines on: 800, 801, 900, 901, 4000. (Part No: EAF6055D)
$32.92

Piston and Sleeve Kit 172 Gas - Kit, press-in sleeves, pistons, and rings for one engine. For 4000, 800, 801, 900, 901. All with 3.9 inch bore. Has 4.1 inch outside diameter. (Part No: FPN6055A)
$266.99

Piston and Sleeve Kit 172 Gas - Kit, drop-in sleeves, pistons, and rings for one engine. For 4000, 800, 801, 900, 901. All with 3.9 inch bore. Has 4.098 inch outside diameter. (Part No: FPN6055B)
$285.79

Piston and Sleeve Kit, STD, 172 CID Diesel - For 801, 901, 4000. All with 172 CID, diesel, 1953-1964. Piston and Sleeve Kit contains: (4) pistons, sleeve and rings. 3.9 inch bore. (Part No: PK20)
$590.42

Piston, .020 Overbore, 172 CID Gas Engine - Overbore .020 3-ring piston (rings NOT included) with pin and locks. Note: Bore sleeveless engines when installing oversize pistons and rings. For 172 CID 4-cylinder gas engine (1953-1964) on: 800, 801, 900, 901, 4000. (Part No: EAF6108G)
$42.29

Piston, .030 Overbore, 172 CID Gas Engine - Overbore .030 3-ring piston (Rings NOT included) with pin and locks. Note: Bore sleeveless engines when installing oversize pistons and rings. For 172 CID 4-cylinder gas engine (1953-1964) on: 800, 801, 900, 901, 4000. (Part No: EAF6108H)
$65.98

Piston, .040 Overbore, 172 CID Gas Engine - Overbore .040 3-ring piston (Rings NOT included) with pin and locks. Note: Bore sleeveless engines when installing oversize pistons and rings. For 172 CID 4-cylinder gas engine (1953-1964) on: 800, 801, 900, 901, 4000. (Part No: EAF6108J)
$41.87

Piston, STD, 172 CID Diesel - Standard (PK20) 5-ring piston (rings NOT included) with pin and locks for 4-cylinder 172 diesel engine on: 4000, 801, 901 (1958 to 1964). (Part No: 313879)
$138.59

Piston, Standard, 172 CID Gas Engine - Standard 3-ring piston, 3.9 inch bore, (Rings NOT included) with pin and locks. For 172 CID 4-cylinder gas engine on: 800, 801, 900, 901, 4000 (1953 to 1964). (Part No: EAF6108F)
$44.10

Rod Bushing - For 172 CID DIESEL in: 4000, 801, 901. (Part No: 310633)
$17.98

Sleeve and Piston Kit, 172 Gas, STD - For models: 800, 801, 900, 901, 4000, Jubilee. All with 172 CID Gas, 4 Cylinder (1955-1964). Standard bore. For 4000 (1962-1964) that were sleeveless require block be bored. Sleeve and Piston Kit contains: pistons, sleeves, piston pins, retainers and chrome top and chrome steel rail oil control rings. (Part No: PK15G1)
$331.74

Sleeve, STD, 172 CID Gas - Standard sleeve. For tractor models 4000, 800, 801, 900, 901. All with 3.9 inch bore, 4.098 inch outside diameter drop-in. Prefinished. (Part No: B3NN6055B)
$27.15

Engine Rings
Piston Ring Set - .020 - Complete set for 1 engine. 4 Cylinder gas 3.9 inch bore with .020 inch overbore with 2 compression at 3/32 inch and 1 oil. (Part No: 2C7673.020)
$70.99

Piston Ring Set - .040 - Complete set for 1 engine. 4 Cylinder gas 3.9 inch bore with .040 overbore with 2 compression at 3/32 and 1 oil ring at 3/16. (Part No: 2C7673.040)
$72.16

Piston Ring Set - .060 - Complete set for 1 engine. 4 Cylinder gas 3.9 inch bore with .060 overbore with 2 compression at 3/32 and 1 oil. (Part No: 2C7673.060)
$82.69

Piston Ring Set - Standard - Complete set for 1 engine. 4 Cylinder gas 3.9 inch bore with 2 compression at 3/32 and 1 oil. (Part No: 2C7673)
$82.69

Piston Ring Set, .020, 172 CID Diesel - Overbore .020 5-ring set. Complete set for 4-cylinder 172 CID Diesel on models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4000. (Part No: C5NN6149AB)
$98.20

Piston Ring Set, .030, 172 CID Diesel - Overbore .030 5-ring set. Complete set for 4-cylinder 172 CID Diesel on models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4000. (Part No: C5NN6149AC)
$145.16

Piston Ring Set, .030, 172 CID Gas - Overbore .030 (Standard bore is 3.9 inch) 3-ring set. Set uses 2 compression rings at 3/32 inch (top is Chrome), and steel rail oil ring at 3/16 inch. Complete set for 172 CID Gas on models (1955 to 1964): 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. (Part No: EAF6149B)
$47.42

Piston Ring Set, .040, 172 CID Diesel - Overbore .040 5-ring set. Complete set for 4-cylinder 172 CID Diesel on models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4000. (Part No: C5NN6149AD)
$133.14

Piston Ring Set, Overbore,172 CID Gas - For tractor models 800, 801, 900, 901, 4000. All 1953-1964 with 172 gas. 3.9 inch bore engines. This ring set is for 4 inch overbore, with 2 compression rings at 5/64 inch, 3/32 inch and oil at 3/16 inch. (Part No: PRS109)
$38.82

Piston Ring Set, Standard, 172 CID Diesel - Standard 5-ring set. Complete set for 4-cylinder 172 CID Diesel on models: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4000. (Part No: C5NN6149AA)
$91.52

Piston Ring Set, Standard, 172 CID Gas - Complete set for 1 engine. Standard bore (3.9 inch) 3-ring set. Set uses 2 compression rings at 3/32 inch (top is Chrome), and Steel rail oil ring at 3/16 inch. Complete set for 172 CID Gas on models (1955 to 1964): 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. (Part No: EAF6149A)
$33.75

Piston Ring Set, Standard, 172 CID Gas, CAST IRON - CAST IRON set, standard, (standard bore is 3.9 inch) 3-ring set. Set uses 2 compression rings at 3/32 inch, and oil ring at 3/16 inch. Complete set for 172 CID Gas on models (1955 to 1964): 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. (Part No: FPN6149A)
$34.09

Exhaust System
Elbow to Exhaust Manifold Gasket - Fits 134 CID gas engines 1953-1964 on Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771 and 172 CID gas engines 1955-57 on Models: 800, 801, 900, 901, 2000, 4000. Use with elbow NAA55250B and muffler NAA5230E. **Price per each. (Part No: NAA55232A)
$1.34

Elbow to Exhaust Manifold Gasket - For 172 CID gas engines 1958-1964 on Models: 800, 801, 900, 901, 4000. Use with elbow 310075 and muffler 310079. Priced each. (Part No: 310074)
$2.35

Exhaust Elbow With Gasket - Outlet is 1 5/8" O.D. For 2000, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 740, 750, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1800, 1801, NAA, Jubilee. All with 134 or 172 CID engine. (Part No: NAA55250BWG)
$34.02

Exhaust Elbow With Gasket - Exhaust elbow with gasket. Outlet 2 inch outside diametrer. For tractor models 4000, 801, 901, with 172 gas engines. (Part No: 310075WG)
$21.96

Extension Pipe - Vertical exhaust pipe with clamp, less muffler. One piece pipe, makes 2 90 degree turns up and around hood for vertical exhaust with muffler in original horizontal position. Inlet is 1 5/8 inch inside diameter and 1 3/4 inch outlet. For tractor models 4000, 801, 901. (Part No: M1110)
$39.54

Extension Pipe, Curved - Outlet pipe, curved section. Not for row crop or grove. Inlet 1-3/4 inch inside diameter, outlet 1-3/4 inch outside diameter. For 172 CID gas engines. Tractors: 801, 1801, 4000 (4 cylinder 1958-1964). (Part No: 311051)
$22.73

Extension Pipe, Straight - Outlet pipe extension, straight section. Inlet 1-3/4 inch inside diameter, outlet 1-3/4 inch outside diameter, 60 inch length. For 172 CID gas engines. Tractors: 801, 1801, 4000 (4 cylinder 1958-1964). Not for row crop, grove, select-o-speed. (Part No: 311050)
$22.63

Intake and Exhaust Manifold Gasket - For gas engine Models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All from 1953-1964. Price is for each, 2 needed per tractor. (Part No: C0NN9448C)
$2.19

Intake and Exhaust Manifold Gasket, Diesel - For 172 CID diesel engine Models: 800, 801, 900, 901, 4000. All 1958-1964. Sold in minimum qty of 4. Price is for each (Part No: 310658)
$5.73

Manifold Nut and Washer Kit - This Brass Manifold Nut and Washer Kit is used on Ford 134 and 172 Gas Engines from 1953 to 1964. For models NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000 and 4000. One set per tractor. (Part No: 33817-KIT)
$7.50

Manifold, Gas - Intake and Exhaust Manifold. For 4 cylinder gas engines in NAA, Jubilee, 600, 601, 700, 800, 801, 900, 901, 2000, 4000. Replaces EAE9425C, 312556, B9NN9425A. Carburetor mounting holes are slotted to accommodate different carburetors. Comes with mounting gasket and 2 elbow gaskets. (Part No: TFM9425WG)
$73.07

Muffler & Pipe Assembly - For the following 144 cubic inch diesel tractors: 501, 601, 701. For the 4-cylinder 2000 series (1958-1964). Also for the following 172 cubic inch gas diesel tractors: 801, 901, 1801, the 4-cylinder 4000 series (1958-1964). This vertical two-piece muffler and pipe includes clamp. Custom design ready for assembly. Pipe inlet 2 inch inside diameter, outlet 2 inch outside diameter. (Part No: M1111)
$41.61

Muffler, Horizontal - For tractor models NAA, Jubilee, 501, 600, 601, 700, 4-cylinder 2000 (1953-1964), 800, 900, (1955-1957), 4-cylinder 4000 Series (1958-1964). All with 134 or 172 CID gas engines. Dimensions: Inlet tube length 2-1/4 inch, inlet tube 1-5/8 inch, shell length 13 inch, shell diameter 3-1/4 inch, outlet tube length 2-1/4 inch, outlet tube outside diameter 1-5/8 inch, muffler overall length 17-1/2 inch. (Part No: NAA5230E)
$19.49

Muffler, Horizontal - 2 inch inlet inside diameter, 1-7/8 inch outlet outside diameter, 13-1/2 inch shell length, 17-1/2 inch overall length, 3-1/2 inch body diameter. For tractor models 1801, 2000, 4000, 501, 601, 701, 801, 901. (Part No: 310079)
$23.91

Fuel System / Air Intake
Adjustable Needle Assembly - 3/8 inch x 24 thread. Main adjusting needle. For tractor models: 4000 4 cylinder, 801, 901, 1801, 1811, 1821, 1841, 1871, 1881, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140 1958 to 1964 with 172 cubic inch engines with one of the following Marvel carbs TSX181, TSX221, TSX245, TSX332, TSX374, TSX397, TSX413, TSX436, TSX505, TSX526, TSX530, TSX641, TSX662, TSX688, TSX689, TSX695, TSX756, TSX768, TSX769, TSX772, TSX774, TSX775, TSX777, TSX784, TSX792, TSX801, TSX811, TSX813, TSX816, TSX97. Replaces 311605. (Part No: C3NN9G504A)
$16.44

Air Cleaner Clamp - For tractor models: 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 2N, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, NAB. (Part No: 311508)
$13.26

Air Cleaner Hose - For tractor models 1953-1957. Rubber hose is not like original metal tube. VERIFY THE INSIDE DIAMETER AT 1.5 INCHES, 18 inches Length (20.5 inches following the curves). For tractor models using 134/172 gas engine: 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: 311112)
$37.25

Air Cleaner Oil Cup - 4-3/8 inch inside diameter, 4-3/4 inch outside diameter, 3 inch tall. For tractor models 1801, 1811, 1821, 1841, 1871, 1887, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 601, 701, 801, 901. (Part No: 311510)
$31.43

Air Cleaner Oil Cup, Inner - For tractor models 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 601, 701, 801, 901. (Part No: 311506)
$8.25

Air Cleaner Tube - Metal Tube is 90 degree with 2 inch outside diameter. For gas and LP models: 801, 901, 1801, 1811, 1821, 1841, 1871, 1881, 4000 4 cylinder, 4030, 4040, 4121, 4130, 4131, 4140. All 1958 and up. Replaces: 86531351, 311092. (Part No: 311092)
$35.10

Air Hose to Carburetor - 2 Inch - For tractor models 601, 701, 771, 801, 811, 821, 841, 850, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 2000, 4000 series. All 1958 and up. For tractors using 2 inch metal pipe. (Part No: 311107)
$3.92

Carburetor Butterfly - Fits Marvel Schebler TSX33, TSX241, TSX241A, TSX241B, TSX241C, TSX420. For tractor models NAA, NAB, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: 9N9585A)
$3.54

Carburetor Float - For Zenith 13881 in models 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981. (Part No: R4531)
$24.95

Carburetor Float, Large Bowl - Float, for large bowl (2 7/8 inches at widest point of outside edge of floats) carburetors. For tractor models (801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4000 all 1958-1964 with 172 CID gas engines) using Marvel-Schebler large-bowl carburetors. (Part No: 311608)
$20.25

Carburetor Float, Small Bowl - Small bowl carburetor Float for Marvel Schebler carbs (2 3/8 inches at widest point of outside edge of floats) used on 9N, 2N and 8N tractors AND used only on the following engines (yr): 134 CID (1953-1954) or 172 CID(1955-1957) gas engines on tractors: NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000. (Part No: 9N9550A)
$8.09

Carburetor Gasket Set - For tractor models 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Part No: EAE9502)
$5.03

Carburetor Kit, Basic - Carburetor Kit - Basic - For 801, 901, 4000 all with 172 CID and Marvel-Schebler TSX662, TSX769, TSX813, TSX966, TSX977 Includes Gaskets, Needle, Seat & Throttle Shaft. Basic Carburetor Rebuild Kit (Part No: BK47CV)
$17.88

Carburetor Kit, Basic - Kit for Marvel TSX692, TSX765, TSX976, TSX580, TSX500, TSX577, TSX241A, TSX241B, TSX241C, TSX420, TSX33, TSX771, TSX593, TSX706, TSX551 carbs used on 2000 4 cyl., 2N, 4000 4 cyl., 600, 601, 605, 611, 612, 621, 630, 631, 640, 641, 644, 650, 651, 655A, 655C, 655D, 655E, 660, 661, 671, 675D, 675E, 681, 685, 700, 702, 724, 725, 730, 735, 740, 741, 743, 744, 745, 745S, 750, 755, 755A, 755B, 765, 766DT, 771, 775, 785, 800, 801, 811, 820, 821, 840, 841, 844, 850, 851, 856, 860, 861, 871, 881, 885, 8N, 9N, NAA, 900, 901, 907, 909, 910, 917, 941, 950, 951, 960, 961, 971, 980, 981. (Part No: MS101)
$13.65

Carburetor Kit, Basic - Kit for Marvel TSX662, TSX769, TSX813, TSX977 carbs used on 4000 4 cyl., 800, 801, 811, 821, 840, 841, 844, 850, 851, 856, 860, 861, 871, 881, 885, 900, 901, 907, 909, 910, 917, 941, 950, 951, 960, 961, 971, 980, 981. (Part No: MS102)
$16.50

Carburetor Kit, Comprehensive - For tractor models with 172 gas engine 1958 to 1960 prior to serial number 126524. Carburetor part number: Marvel-Schebler TSX769, TSX813, Ford 312955 1962 to 1964 after serial number 126524. Carburetor part number: Marvel-Schebler TSX813, Ford 312955. For: 801, 901, 4000. Does not include float. (Part No: C547CV)
$46.75

Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 801 series & 901 series 1958-1960 PRIOR to serial number 126525 with 172ci gas engine. This Zenith carb replaces Marvel-Schebler TSX769, Ford 312955 and, B8NN9510B. Center-to-center distance on the mounting studs is 2-11/16" Fuel inlet is 3/8 inches. Made in USA, 1 year warranty. (Part No: 13881)
$299.46

Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 801 and 901 AFTER serial number 126523, and Model 4000 1962-1964 with a 172 cubic inch engine. This Zenith carb replaces Marvel-Schebler TSX813 and Ford C0NN9510C. Center to center on the 2 mounting bolts is 2 3/4 inches. Fuel inlet is 7/16 inches. Made in USA, 1 year warranty. (Part No: 13875)
$316.02

Carburetor, Rebuilt - Fits 801, 901, 4000 EARLY. Replacement for OEM numbers TSX813 or TSX662. Add $75.00 core charge to price, this charge is refundable if you send your core to us. (Part No: 1312-CARB)
$157.71

Carburetor, Rebuilt - Fits 801, 901 - replacement for OEM TSX769. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1316-CARB)
$157.71

Choke Knob - For Ford gas tractors 1939-1964. Fits models: NAA, Jubilee, 2N, 8N, 9N, 501, 600, 601, 6411, 700, 701, 801, 900, 901, 2000, 4000. Replaces 9N9703, 9N9703B. (Part No: 9N9703)
$4.65

Choke Rod Assembly - This is the Carburetor choke control rod assembly for Ford tractors 1953-1964. Uses 9N9703 or 9828014 knob. Not included. Replaces NAA9705B. (Part No: NAA9705)
$13.95

Cyclone Air Cleaner Glass Jar - For 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, all 1939 to 1964. Cylone Air Cleaner Glass Jar (Jar Only) Screw on type. Exactly Like Original for tractors that used the "Cyclone" Air Cleaner only. (Part No: 230056)
$19.95

Cyclone Cup and Spring Assembly - Only for those tractors (1939-1964) that used the CYCLONE air cleaner assy which MAY include: 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. Verify the type of air cleaner you have before ordering. (Part No: 230053)
$22.97

Fuel Bowl - Fuel bowl. For tractor models (4 cylinder engines) 600, 800, 900, 1801, 2000, 4000, 501, 601, 701, 801, 901. (Part No: 311276)
$7.49

Fuel Cap, Vented - 2-5/8 inch outside diameter, chrome finish, 1-3/4 inch edge of tang to edge of tang, vented, includes gasket. For tractor models 8N, 9N, 2N, Jubilee, Golden Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2100, 2110. (Part No: C5NN9030D)
$7.88

Fuel Filter - Fuel sediment filter. For all 144 and 172 CID Diesel tractors 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: 309991)
$2.54

Fuel Filter Assembly - Sediment bowl has a 7/16 inch bolt hole. For tractor models 801, 901, 4000 (1960 to 1964). (Part No: C0NN9155A)
$18.44

Fuel Filter Valve Stem to Carb Body Gasket - 0.389 I.D., 0.579 O.D., 0.062 thick, 2 used per tractor, sold individually. Made of fiber. For tractor models 2000 4 cylinder (4-cylinder), 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 701, 740, 741, 771, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 2030, 2031, 2110, 2111, 2120. (Part No: NCA99180B)
$1.47

Fuel Filter Valve Stem to Carb Body Gasket - 0.443 inch inside diameter x 0.600 inch outside diameter x 0.047 inch thick. 2 used per tractor, sold individually. Fiber gasket. For tractor models 4000 4 cylinder, 801, 901, 1801, 1811, 1821, 1841, 1871, 1881, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140 (172 cubic inch gas engine with serial number 126525 and up), (6000 gas late 9/1960 and up). (Part No: NCA99180A)
$.75

Fuel Injector - For tractor models 801 series, 901 series using CAV/Lucas type pump. Additional $20 core charge will be added to your order. If ordering on-line, this additional fee will not post on your order confirmation. This is a special order item and non-returnable. Replaces 5210603, NL123, D0NN9E527A, D0NN9F593B (Part No: SDN5210603)
$120.53

Fuel Line - Measures 1/4" dia. line, 15-1/2" long. For use with Fuel Valve # 311292WOR on the following models with 172 cubic inch gas engines from SN# 11977 to 126524: (some 801), 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881. (Part No: 310918)
$47.26

Fuel Sending Unit - Gas tank sending unit with gasket (mfg. by Stewart Warner). For 134 & 172 CID engines. Will work for 6 or 12 volt. (1958-1964): 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981. (Part No: B9NN9275S)
$99.35

Fuel Shut Off Valve - With O-Ring, at fuel tank. Has 1/2 inch female outlet. For 172 CID gas engine in tractors with serial number 126525 and up, models 801 Series, 901 Series, 4000, (1960 to 1964). (Part No: C0NN9285A-WOR)
$28.49

Fuel Shut Off Valve - Valve has 3/8 inch female outlet. For gas powered tractor series: 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 2000 (1955-1964), 800, 801, 900 (to serial number 126524 with 1/4 inch fuel line 1955-1960), diesel powered tractors (500, 600, 700, 800, 900, 2000, 4000) series (1958-1964). Uses fuel line 310918 or NCA9282B. (Part No: 311292WOR)
$25.49

Fuel Tank - New Fuel Tank with sending unit hole. Includes rear support. Depending on the tractor model, this tank may have a smaller capacity than the original. Sending unit not included. Use part number 310938. Fits 2000 (4 cylinder 1962-1964), 4000 (4 cylinder 1962-1964), 601 Series, 701 Series, 801 Series, 901 Series. Replaces B9NN9002B, C0NN9002D, C0NN9002N, NAA600800G, NAA9002E. This tank is for gas application. It can be used for diesel if you install a diesel return line. (Part No: NAA600800GWS)
$179.33

Fuel Tank - For Gasoline engines 11 gallon, No opening for sending unit. Tank has two threaded openings in bottom for fuel outlet, center and outer edge. (fuel line must be modified) fits: NAA, Jubilee 1953-54; 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: NAA600800G)
$192.08

Governor Compensator Spring Assembly - 3 Pieces. Replaces NCA99810A. For Jubilee, NAA thru 960 1953-1958 4 cylinder gas. For 501 thru 4140 4 cylinder gas and LP 1958-1964 with engine serial number 26402 and up. (Part No: NCA99810A)
$13.43

Hand Throttle Control Lever Spring - This Hand Throttle Control Lever Spring is used on Ford Tractors 1953-1964. It replaces original part number NAA9806B (Part No: NAA9806B)
$3.95

Injection Line, Cylinder 1 - For 4 cylinder models all built after 1-1-1958. Replaces 500734. (Part No: C0NN9A555E)
$29.84

Injection Line, Cylinder 2 - For 4 cylinder models built after 1-1-1958. Replaces 500738. (Part No: C0NN9A556E)
$31.92

Injection Line, Cylinder 3 - For 4 cylinder models all built after 1-1-1958. Replaces 500738. (Part No: C0NN9A557E)
$28.93

Injection Line, Cylinder 4 - For 4 cylinder models all built after 1-1-1958. Replaces 500740. (Part No: C0NN9A558E_)
$31.40

Injector Nozzle - Fuel nozzle. 1800 Series, 2000 4 cylinder 1962-1964, 2030 Compact Tractor, 2300, 2310, 3000, 3055, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550 Indust/Const, 4000 4 cylinder 1962-1964, 4030, 4040, 4110, 4120, 4130, 4140, 4190, 4330, 4340, 4400, 4410, 4500 Indust/Const, 5000, 501 Series, 5190, 5340, 5500 Indust/Const, 6000, 601 Series, 7000, 701 Series, 801 Series. Replaces C5NE9E527A, D0NN9E527A, E1ADDN993149B, 81825598, DDN993149B. (Part No: D0NN9E527A)
$27.67

Needle Valve - Viton float valve needle, seat and gasket assembly. For tractor models (501, 601, 701, 600, 700, NAA, Jubilee, 2000, 800, 900, 801, 901, 4000. All with 134 or 172 CID gas engines from 1958-1964). (Part No: C3NN9D532A)
$4.59

Precleaner Cap Assembly - This new air Pre-cleaner Cap Assembly fits tractor models 1801, 1811, 1821, 1841, 1871, 2000 3 cylinder, 2600, 3000, 3600, 4000 3 cylinder, 4600, 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 1881, (5000 Gas with oil bath air cleaner), (532 Diesel with oil bath air cleaner ), (6000 Gas/Diesel with oil bath air cleaner), Industrial: 231, 335, 515, 531. Replaces: 81823387, 86555327, B9NN9A660A, B9NN9A667A, C0NN9A660A. It has a 2 inch inside diameter plastic base, 5-1/2 inch pre-cleaner outside diameter. MEASURE BEFORE ORDERING. (Part No: B9NN9A660A)
$61.41

SEDIMENT BOWL ASSEMBLY - Fuel filter assembly, gasoline, sediment bowl type has a 3/8 inch bolt hole. For 134 CID engines. Tractors 501, 601, 701, 2000, (1958 to 1964) For 172 CID engine to SN# 126524 in tractors 801, 901, 1801, (1958 to 1960) (Part No: 311272)
$19.49

Screen - Air cleaner funnel screen is for tractor models NAA, Jubilee, 600, 601, 701, 800, 801, 900, 901, 2000, 4000. (1953-1964) TIS (Part No: NAA9669A)
$3.75

Sediment Bowl Retaining Bolt 3/8 Dia. - Banjo Bolt. Length is 1 3/8 with 3/8-24NF Threads. 2000 4 cylinder, 501, 601, 701 (1958 - 1964 with 134" engine), 801, 901, 1801 (1958 - 1960 with 172" gas engine up to serial number 126524). If you need a gasket for this bolt, order 2 of part number NCA99180B. (Part No: 86531362)
$10.43

Sediment Bowl Retaining Bolt 7/16 Dia. - Banjo Bolt. Length is 1 1/2 with 7/16-20NF threads. Fits 4000 4 cylinder, 801, 901, 1801 (1960 to 1964 with 172 cubic inch gas engine serial number 126525 and up), and 6000. If you need a gasket for this bolt, order 2 of part number NCA99180A. (Part No: C0NN9A349B)
$11.93

Thottle Control to Bellcrank Rod - This Thottle Control to Bellcrank Rod is used on non-diesel fords, 1953 - 1964. It replaces original part number NAA9815C (Part No: NAA9815C)
$9.95

Throttle Bellcrank Friction Disc Spring Washer - 2-7/16 inch diameter, 7/16 inch center hole. For tractor models: NAA, NAB, Jubilee, 501, 600, 601, 700, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2111, 2120, 4000, 4030, 4040, 4121, 4130, 4140 (4 cylinder 1953 thru 1964). (Part No: NAA99778B)
$7.88

Throttle Control Rod - 4-1/2 inch overall length, includes one spring steel clip at each end of the rod. For tractor models NAA, NAB, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 741, 771, 740, 750, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 801, 811, 821, 841, 851, 861, 871, 881, 701, 801, 900, 950, 960, 901, 941, 951, 961, 971, 981 1953 thru 1964 gas only. Replaces C0NN9A790A. (Part No: NAA9815F)
$19.75

Throttle Control Rod - Governor to carburetor, clevis end is not included. For tractor models: 2000 4 cylinder, 4000 4 Cylinder, Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140 4-cylinder gas 1953 thru 1964). Replaces 86552618. (Part No: EAF9818C)
$14.80

Throttle Control to Governor Rod - This throttle control to governor rod is used on Ford tractors models 600, 601, 700, 701, 501, 800, 801, 900, 901, 2000, 4000 and 1801, 1955-1965. It replaces original part number NCA99817A (Part No: NCA99817A)
$13.95

Throttle Rod Grommet - This throttle rod gromment is used on Ford Tractors 1953 to 1974. It replaces original part numbers: 353873S, 83416731, 83935151 (Part No: 353873S)
$1.23

Gauges
Fuel Gauge - For tractor models 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 2000, 4000, all 1958-1964. Fuel Gauge 6 VOLT. (Part No: 310948)
$26.99

Fuel Gauge - For tractor models 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 2000, 4000, all 1958-1964. Fuel Gauge 12 VOLT. (Part No: 310949)
$23.99

Fuel Sending Unit - Gas or Diesel, 6 or 12 volt, 1958-1964. For tractor models 801, 901, 4000. Uses Gasket B9NN9276A, sold separately. Also replaces 310941. (Part No: 310940)
$32.85

Fuel Sending Unit Gasket - This gasket is used with 310938 fuel sending Unit. (Part No: B9NN9276A)
$4.86

Gauge and Instrument Kit, 12 Volt - For 4 speed transmissions. transmission. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For tractor models 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Part No: S.67651)
$137.72

Gauge and Instrument Kit, 12 Volt - For 5 speed transmissions. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For tractor models 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Part No: S.67653)
$139.17

Gauge and Instrument Kit, 12 Volt - For select-o-speed transmissions. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For tractor models 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Part No: S.67655)
$137.72

Gauge and Instrument Kit, 6 Volt - Six volt gauge kit for 4 speed transmissions. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For tractor models 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Part No: S.67650)
$139.17

Gauge and Instrument Kit, 6 Volt - For 5 speed transmissions. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For tractor models 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Part No: S.67652)
$139.17

Gauge and Instrument Kit, 6 Volt - For select-o-speed transmissions. Kit includes proofmeter, 80 psi oil gauge, fuel gauge, temperature gauge, fuel sender, and light assembly. For tractor models 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, (4000 1958-1964). (Part No: S.67654)
$139.17

Instrument Panel Light - 12 Volt for tractor models NAA, Jubilee, 501, 600, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000. Includes bulb, light fixture and wire leads. (Part No: S.66854)
$28.97

Oil Pressure Gauge, 80 lb - For the following tractors (before 1965): 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000, NAA, Jubilee. Oil Pressure Gauge, 80 lbs., 2" Body Diameter. (Part No: FAD9273A)
$10.43

Oil Pressure Gauge, 80LB, Black - For tractor models 8N, 9N, 2N, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 4 cylinder), NAA, Jubilee, 1801. Black raised bezel, measures to 80 pound, dash or bracket mounted gauge with a bracket and studs 1/8 inch NPT thread. Replaces FAD9273A. (Part No: FAD9273A_Black)
$10.41

Proofmeter Drive Adapter Shaft - For tractor models 1953-1964: 2000 and 4000 4 cylinder, 501, 600, 700, 800, 801, 900, 1801, 2030, 2031, 2111, 2121, 2130, 3131, 4031, 4040, 4120, 4121, 4131, NAA, Jubilee. VERIFY SIZE overall length of 1.672 inch and outside diameter of 0.435 inch. Fits both Vane and Piston Pumps. (Part No: EAF17375D)
$19.75

Proofmeter Drive Bolt - This Drive bolt fits the following models with Vane and Piston type hydraulic pumps 1953 to 1964: Jubilee, NAA, NAB, 2000 4 cylinder, 4000 4 cylinder, 501, 600, 601, 700, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2111, 2120, 2130, 4030, 4040, 4121, 4130, 4140. Replaces: EAF951A. (Part No: EAF951A)
$11.25

Proofmeter, Select-O-Speed - For tractor models 2000, 4000, 601, 61, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981 with Select-O-Speed. (Part No: C3NN17360J)
$42.97

Tachometer Cable - Ford Proof Meter/Tach cable 30 1/2 inches long. Fits the following tractors (before 1965): NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: B9NN17365B)
$9.15

Tachometer Cable, Steel - Ford Steel Jacketed Proof Meter/Tach cable 30 1/2 inches long. Fits the following tractors (before 1965): NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: B9NN17365BSTEEL)
$12.59

Temperature Gauge, Black Rim - For NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All 4-cylinder before 1964 (except Majors). Temperature gauge, 2 inch diameter, 34 inch capillary tube length. Replaces FAD10883A. (Part No: C3NN18287A-Blac)
$20.99

Temperature Gauge, Chrome Rim - For tractor models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All 4-cylinder before 1964 (except Majors). Temperature gauge, 2 inch face diameter, 34 inch capillary tube length. Replaces FAD10883A, and C3NN18287A. (Part No: C3NN18287A-Chro)
$15.00

Warning Light - Warning light serves as a select-o-speed transmission oil temperature warning light or as a torque converter transmission oil temperature warning light, or as a generator warning light. For the following models: 2000, 4000, 501, 601, 701, 801, 901, 1811, 1881, 2100, 2110, 2111, 2120, 3000, 4100. 0.875 inches outside diameter, 3/4 inches - 20 NF thread, 0.885 inches tall. Bulb and socket not included. (Part No: B9NN10241B)
$20.18

Hitch / Drawbar
Drawbar - Drawbar And Hanger Assembly For 800 Series (except 820, 821 (Part No: SDA8)
$128.92

Hanger - Drawbar hanger. For 800, 801, 4000 4 Cylinder (Part No: NDA809A)
$44.16

Leveling Box Assembly, Right Hand - Right Hand Leveling Box Assembly with fork. Adjusts 23 to 27 inches center hole to center hole. For Ford tractors: 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2100, 2600, 2610, 3000, 3100, 3600, 3610, 4000 (Except Row Crop), 4110, 4600. INDUSTRIALS: 3550, 420. Replaces NCA577A. (Part No: HLBMF62)
$102.02

Leveling Box Knuckle Pin - MUST ORDER IN QUANTITY 2 PRICED EACH. For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 741, 771, 740, 750, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 801, 811, 821, 841, 851, 861, 871, 881, 701, 801, 900, 950, 960, 901, 941, 951, 961, 971, 981, 8N, 9N, 2N all built 1939 to 1964, (2000, 3000, 4000 1965 and up), (3600, 4600 1975 and up). 5/8 inch pin diameter, 2 7/8 inch usable length. Takes our 3/16 inch linchpin (part number DKP316). MUST ORDER IN QUANTITY OF 2, PRICED EACH. (Part No: 9N595)
$1.59

Leveling Rod Assembly, Left Hand - Left Hand Leveling Arm Assembly. Fits models: 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 850, 951, 960, 961, 971, 981, 2000, 2600, 2610, 3000, 4000. Includes: C5NNB863A rod, NCA585B fork, and 957E566 knuckle. Replaces NCA564B, C5NN564D, . (Part No: 6N564B)
$50.37

Lower Link Support Pin, 5 1/8 Inches - This Lower link support pin measures 5 1/8 inches long. It is for tractors less Differential Lock for models 2000, 3000, 3600, 4000, 4600, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 8N, 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, Jubilee. (Part No: NCA563C)
$14.25

Stabilizer Pin with nut & lockwasher - Category I. Must order in quantity of two price shown is for one. Length2.625 inches, Pin Diameter0.875 inches, Thread 0.625 - 18``Replaces original part numbers C5NNA889A, 81813825, 81822760, 81823752 (Part No: SBP75-WNL)
$2.18

Swinging Drawbar Clevis Assembly - Clevis assembly with pins for SDA6 or SDA8 kits. For tractor models 8N, Jubilee, NAA, NAB, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, 2120, 2121, 2130, 2131, 4000 4 cylinder, 4030, 4031, 4040, 4120, 4130, 4131, 4140. (Part No: NCA803B)
$31.50

Swinging Drawbar Kit - Swinging Drawbar Kit - Fits: 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, (and 4000 except Rowcrop 1965 and up). Contains: drawbar, hanger, clevis and pin. ADDITIONAL $15 SHIPPING DUE TO WEIGHT. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FDS302)
$118.60

Top Link Rocker - For 8N, 9N, 2N, NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800 Hi-clearance, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 2000 4 cylinder Hi-clearance, 4000 4 cylinder Hi-clearance. (Part No: NCA535A)
$56.69

Hydraulic System
Cylinder with Unload Valve - Hydraulic Cylinder with Unload Valve. Does not include control valve. Fits 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000, Dexta, Super Dexta. (Part No: C5NN477B)
$604.56

Draft Control Plunger - For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000, Dexta, Super Dexta. (Part No: 8N541B)
$34.95

Draft Control Plunger Spring - This Draft Control Plunger Spring fits between the hydraulic plunger and yoke. Fits 9N, 2N 8N, NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 2000, 4000 (except row crop), Dexta, Super Dexta. (Part No: 9N547B)
$22.95

Draft Control Spring Plate - This Draft Control Spring Plate is used on Ford Tractors from 1939 - 1964. It Replaces: 81801555, 957E527, 9N527, NCA527A (Part No: 9N527)
$15.68

Felt, Spring Seat - Hydraulic lift draft control spring seat. For tractor models 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (1939-1962). (Part No: 9N529)
$3.95

Friction Disk - Hydraulic Control Lever. 3 inch diameter, 1/2 inch hole. For tractor models 2N, 8N, 9N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, (2000 & 4000 4 cylinder). Price is for each. (Part No: C5NN518B)
$.75

Gasket Kit - Piston type hydraulic pump gasket & O ring kit. For 2000, 4000, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, Jubilee, NAA. (Part No: FPN910B)
$10.95

Gasket, Hydraulic Pump Drain - Fits Ford Tractors, 1939 to 1964. Replaces: 81804570, 8N7011. (Part No: 8N7011)
$1.38

Hydraulic Lift Control Quadrant - For tractor models 8N, 9N, 2N. Hydraulic lift control lever connects to this. Also fits NAA, Jubilee, 2000, 4000, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981. All 1939-1964 4 cylinder. Replaces 2N516A1, 2N516A2, 2N516B. (Part No: 9N515)
$20.75

Hydraulic Lift Cover Repair Kit - Hydraulic Lift Cover Repair Kit. For 2000, 4000, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981. All prior to 1965. Kit contains (1) C0NNB999A seal, (1) NCA473A washer, (1) 9N532 gasket, (1) NCA502A gasket and (20) O-rings. Will work for Dexta and Super Dexta if Piston has been changed to O-Ring & Back-up Rind Style. E11GF9 single grove gland seal is available separately. (Part No: LCRK5564)
$6.98

Hydraulic Lift Lever - For tractor models 8N, 9N, 2N, NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, (2000, 4000 4 cylinder). (Part No: S.66598)
$20.63

Hydraulic Lift Oil Level Dipstick - Fits Ford 4 cylinder tractor models (1954-1964) 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4130, 4131, 4140, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900 and 901. Replaces NCA927B (Part No: NCA927B)
$14.50

Hydraulic Lift Ram Arm - For 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000. All before 1965 and with 4 cylinder engines. (Part No: NCA545B)
$58.56

Hydraulic Lift lever Assembly - For 8N, 9N, 2N, NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 PRIOR TO 1965. Assembly contains: Lift control lever with ball end 2N512, lift control plate (cast aluminum as original) 2N-516A2 and friction disc C5NN518B. (Part No: 2N512)
$39.44

Hydraulic Pump - Complete Piston type pump can also replace the vaine style pump (Hydraulic Manifold must be changed to a piston type if replacing a vain type. Available for a NAA only as part # NAA876A). Replaces NCA600C and NCA600F. For NAA, Jubilee, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000 4 cylinder, 4000 4 cylinder. Replaces: NAA600D, NCA600C, NCA600F. (Part No: NAA600D)
$888.03

Hydraulic Pump Drive Shaft - Shaft is 3/4 inch diameter, 9-3/8 inches overall length. End A type: key, 3/4 inch size. End B type: 10 spline, 1 inch size. Associated components: end A mates to flex coupler number: L601-14 (3/4 inch bore drive flanges both sides) and end B mates to hub number: 290421. Pump Drive for 1953-1964 tractors: 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, NAA, 2000, 4000. (Part No: 195454)
$37.52

Hydraulic Pump Gear Housing - For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: NCA905C)
$185.38

Hydraulic Pump Repair Kit - This Hydraulic Pump Repair Kit is for the Piston Type Pump. Services 1953-1964 four cylinder gas and diesel tractors. For tractor models NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 800, 801, 900, 901, 2000, 4000. Will service NCA600C and NCA600F pumps. Replaces CCPN600A and CCPN600B. (Part No: CCPN600AB)
$36.30

Hydraulic Pump Shaft - Wobble Shaft For 4 Cylinder Models (1953-1964) Using NAA600D Or NCA600F Pump Assemblies. For tractor models: 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681 (Part No: NCA966E)
$56.83

Hydraulic Pump Shaft Oil Seal - For piston type pump. Measures I.D. 0.9350, O.D. 2.004, W 0.5315. For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: NCA851A)
$5.35

Hydraulic Pump Valve Assembly - This Hydraulic Pump Valve Assembly fits 4 cylinder Ford Tractors built between 1954 and 1964. For the following models: 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, 2110 4 cylinder, 2111, 2120 4 cylinder, 2121, 2130, 2131, 4000 4 cylinder, 4030 4 cylinder, 4031, 4040, 4110 4 cylinder, 4120, 4121, 4130 4 cylinder, 4131, 4140 4 cylinder, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 940, 941, 950, 951, 960, 961, 971, 981, NAB. It replaces original part numbers 86512642 and NCA638C (Part No: NCA638C)
$107.99

Lift Cylinder Safety Valve - For tractor models: 2000 (4 cylinder 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3500, 3600, 3600V, 3610, 3900, 3910, 4000, (4110, 4120, 420, 445, 445A, 450, 4600, 4600SU, 4610, 515, 545A, 600, 6000, 601 1962-1964, ) 650, 660, 701, 800, 801, Dexta, Super Dexta. Also replaces 957E9842 and C5NN984A. (Part No: 957E984B)
$29.93

Piston - Piston ONLY. Back-up Ring NCA473A and O-ring seal 87111S95 are NOT included. Fits 600, 601, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 2000, 2600, 3000, 3600, 4000, Dexta, Super Dexta. Replaces C5NN530B. (Part No: C5NN530B)
$22.20

Piston O-Ring - This O-ring is used with C5NN530B 3 inch Piston. Fits Models: 230A, 231, 233, 234, 333, 334, 340, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2110LCG, 2310, 2600, 2610, 3000, 3400, 3500, 3600, 3610, 4000, 4110LCG, Dexta, Super Dexta. Replaces 87111S95, 381871R1, 81845041. (Part No: 87111S95)
$0.59

Piston Washer - This backing washer is used with C5NN530B 3 inch piston. Fits Models: 2N, 8N, 9N, 230A, 231, 233, 234, 333, 334, 340, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2310, 2600, 2610, 3000, 3400, 3500, 3600, 3610, 4000, Dexta, Super Dexta. It replaces original part numbers NCA473A and 81801439. (Part No: NCA473A)
$1.88

Quadrant Stop Kit - For tractor models 2000 4 cylinder, 2N, 4000 4 Cylinder, 8N, 9N, Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031 all with 4 cylinder from 1939 - 1964. (Part No: 9N521)
$6.75

Remote Control Kit - Single Spool, Single/Double Acting with Hoses - Female Couplers. For models: Ford up to 1965: 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. After 1965: 2000, 3000, 4000, 2600, 3600, 3900, 4100, 4600, 2310, 2610, 2810, 2910, 3610, 4110, 4610, 3230, 3430, 3930, 4630 (Part No: S.68981)
$274.28

Seat, Hydraulic Lift Draft Control Spring - Exact of original. Fits all models (1939-1964). Fits Models: NAA, Jubilee, Dexta, Super Dexta, 2N, 8N, 9N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 950, 960, 2000, 4000. Replaces: 2N624, 957E624. (Part No: 2N624)
$9.15

Selector Valve - The selector Valve is used on multiple Ford tractors. Fits Models: 230, 231, 233, 234, 250, 260, 333, 334, 335, 340, 345, 420, 445, 450, 515, 530, 531, 532, 535, 540, 545, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2110, 2600, 2610, 2810, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4500, 4600, 4610, 4630, 4830, 5030. Replaces original part numbers: C5NND960C, E0NND960AA, 83906348, 83924886 (Part No: E0NND960AA)
$190.79

Swivel - Draft Control - For tractor models NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 2000, 4000 (except row crop), Dexta, Super Dexta. (Part No: 957E692)
$24.21

Wobble Shaft Plate - For tractor models 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2110, 2111, 2120, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881. Replaces 81813626. (Part No: NCA859A)
$44.30

Wobble Shaft Thrust Plate - This Wobble Shaft Thrust Plate (Bearing) is used in Piston Style Pumps. Fits Models: NAA, Jubilee, 231, 335, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 531, 540, 541A, 540B, 545. 545A, 545C, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000, 4500, 4600. It replaces original part numbers NCA858A, 81802059, C0NN858A. (Part No: C0NN858A)
$48.30

Lights
Headlight Assembly, 12 Volt, Blue - (Single) 12-volt, metal body and bezel, blue enamel finish, 5-3/4 inch diameter for the following tractors: NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 801, 901 (1958-1962), 2000, 3000, 4000, 5000, 7000 (1965-75). Does not match original. (Part No: 310068)
$63.66

Headlight Assembly, 6 Volt, Grey - (Single) Lamp Assembly, 6-volt, metal body & bezel, grey enamel finish. For tractor models NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 800, 801, 900, 2000, 4000 (1939 to 1964). Does not match original. (Part No: 310066F)
$58.35

Headlight Rim - Headlight rim, grey finish. Ring with bolt for 310066 (6 Volt) and 310068 (12 Volt) 5 7/8 inch diameter light units. For 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2310, 2600, 2610, 2810, 2910, 3600, 3610, 3910, 4000, 4100, 4110, 4600, 4610, 5600, 5700, 6600, 6700, 7600, 7700, NAA. (Part No: C0NN13045B)
$17.04

Light Switch - Switch with nut. For 2000, 4000, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981. (Part No: FDN11654A)
$5.99

Sealed Beam Bulb, 6 Inch - The sealed beam bulb is 6V, 5.625 inches in diameter and has two contacts. Fits models: NAA, 2N, 8N, 9N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000. It replaces Ford part number 310061. (Part No: 1002802M91)
$12.74

Tail Light - This is a Duolamp Tail Light And Bracket Assembly used on Ford Tractors 1958 and later. fits models: 340A, 420, 445, 445A, 501, 535, 540A, 540B, 545, 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 1801. Replaces: 310064, 86633401, 86639447, C5NN13403A, D2NN13403A (Part No: 310064)
$47.95

Tail Lite, License Light, Clear Glass Lens - For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881 all 1939-1953. (Part No: 9N13445)
$9.95

Tail Lite, License Light, Lens Gasket - For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881 all 1939-1953. Replaces 40-13460, FAA13447A (Part No: FAA13447A)
$2.95

Taillight Mounting Bracket - Exact of original. Mfg in USA. (Goes between tailight and fender bracket - mounting on top of 9N13470 or 9N13471.) For DUOLAMP tractors 8N, 9N, 2N, NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 1811, (2000, 4000 4-cyl), 1801 series (1949-1954). (Part No: 8N13423)
$9.95

Work Light Assembly - 12 Volt - Worklight assembly, 12-volt sealed beam with on/off switch. Includes 8N15532 fender bracket spacer. DOES NOT COME WITH BRACKET. Like OEM quality except for the lens. For tractors: 2N, 8N, NAA, Jubilee, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 {1947-1964}. (Part No: 8N15500-12V)
$74.95

Work Light Assembly - 6 Volt - Worklight assembly, 6-volt sealed beam with on/off switch. Includes 8N15532 fender bracket spacer. DOES NOT COME WITH BRACKET. Like OEM quality except for the lens. For tractors: 2N, 8N, NAA, Jubilee, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 {1947-1964}. (Part No: 8N15500-6V)
$86.94

Worklight Installation Kit - Worklight Installation Kit For Ford Tractors 1958-64. This kit includes; 311778 Rubber Boot 311779 Special Clip, 311780 Special Cupped Washer 8N-13472, and mounting bracket instructions. Fits models: 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: 309533)
$23.95

Oil System
Dipstick, Engine Oil - Engine oil level indicator measures about 14 3/4 inches overall length for 4 cylinder gas. For tractor models 2000, 4000, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA. (Part No: C0NN6750B)
$6.58

Filter Breather - Rocker Arm Cover Vent Element. Tractors: NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 950, 960, 2000, 4000. (Part No: EAF6866A)
$4.73

Gasket, Oil Pan Drain Plug - Fits Ford Tractors 1939-1964, Models: NAA, NAB, Jubilee, 2N, 8N, 9N, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 980, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4140. This gasket measures 2.632 inches inside diameter, 3.085 inches outside diameter, .250 inches wide and it is .059 inches thick. Replaces 8N6734. (Part No: 8N6734)
$.63

Oil Filler Breather Element - Fits caps 310030 and 8N6766B. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. (Part No: 8N6782A)
$3.68

Oil Filler Cap with Element - For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. This is an original style with element. Overall length is 3 5/8, 1 1/2 diameter tube and tube is 1 3/8 long. Also replaces OEM 8N6766B. (Part No: 310030)
$8.18

Oil Filter - Cartridge Type. For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 thru 1965, 1800, 223, 240, 289, 300, 320, 332, 352, 391. Comes with gasket. Measures 4 3/4 inches long, 4 inch diameter with 3/4 inch diameter holes in each end. (Part No: CPN6731B)
$11.21

Oil Filter - Spin-On Type. For tractor models NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 5610, 6600, 6610. Also replaces, 86546614 and D9NN6714EA. (Part No: E7NN6714AA)
$3.98

Oil Filter Adapter Kit, Spin On - Converts tractor from element style filter to spin on oil filter. Comes with one filter. For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 all from 1953 to 1964 with 4 cylinder gas engine. Can use replacement spin-on filter E7NN6714AA. (Part No: CPN6882A)
$31.35

Oil Filter Mounting Gasket - This gasket fits behind the mounting plate that the filter screws on to. For spin on type oil filters only. For tractor models 1801, 1811, 1820, 1841, 1871, 1881, 2000, 2030, 2110, 2111, 2120, 2130, 2121, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. (Part No: EAA6838A)
$1.10

Oil Pan Plug Kit - Gasket, oil pan plug and screen assembly. For all gas models 1939-1964. Fits 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: 9N6730WG)
$14.25

Oil Pump Gear - Gear, oil pump driven. For tractor models 2000, 4000, NAA, Jubilee, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981. (Part No: EAA6614B)
$27.69

Oil Pump, Hex Drive - Gear Type For applications with hex drive shafts (Shaft not included). For 134/172 CID Gas engine in: Models: 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: EAE6621AB)
$74.52

Oil Pump, Roto Type - For 144 CID or 172 CID DIESEL engine in tractor series: 501, 541, 601, 611, 621, 631, 641, 671, 681, 701, 741, 771, 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 2000, 4000, including HD industrial (1958 to 1964). Roto type oil pump hex drive. Replaces C3NN6621B. Will retrofit 134 CID or 172 CID gas engine if necessary conversion parts have been installed when changing from gear type to roto type pump. (Part No: D1NL6600A)
$157.94

PTO / Driveline
PTO CAP - For tractor models 9N, 8N, 2N, NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000. NOT LIKE ORIGINAL. (Part No: 310088)
$5.84

PTO Cap - Cap for Ford models: 2N, 8N, 9N, NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 1939-1964. Like original. 3 1/2 inches in length. Inside usable length is 2 7/8 inches. Will fit 1 1/8 inch and 1 3/8 inch PTO shafts. (Part No: 310088-OEM)
$23.63

PTO Coupler - This PTO Coupler is inside the tractor. It is used on 4 and 5 speed transmissions, 1955 and later. It is 2.16 inches long. (Part No: NCA717A)
$93.72

PTO Housing Gasket - This PTO Housing Gasket is used on multiple Ford tractor models: Dexta, Super Dexta, NAA, 2N, 8N, 9N, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 420, 445A, 515, 530A, 531, 540A, 540B, 545A, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2110LCG, 2310, 2600, 2610, 3000, 3400, 3500, 3550, 3600, 3610, 4000, 4400, 4500. Replaces: 81801907, 957E4129, 9N4129, C5NN747A. (Part No: C5NN747A)
$0.30

PTO Shaft - PTO shaft, 32-11/16". Converts standard NCA710B shaft to 1-3/8" splines. For 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: NCA710-38)
$63.59

PTO Shaft Bearing, Front - For tractor models: Dexta, Super Dexta, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110LCG, 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3550, 3600, 3610, 3910, 3900, 4000, 4100, 4110, 4110LCG, 4400, 4500, 4600, 4610, 5000, 5600, 5610, 5610S, 5900, 6600, 6610, 6610S, 6700, 6710, 6810, 7600, 7610, 7610S, 7700, 7710, 7810S, 8010. All with 1 3/8 INCH DIAMETER PTO SHAFT. WILL NOT FIT 1 1/8 INCH DIAMETER PTO SHAFT. (Part No: E75GE9)
$8.28

PTO Shaft Seal, Double Lip - For All Models: 1939 thru 1964 with 1-1/8 inch or 1-3/8 inch PTO shaft. 2.45 inch outside diameter, 1 5/8 inch inside diameter, 5/8 inches wide. Replaces OEM numbers : D8NN703AA & D9NN703BA, and 9N703B. (Part No: D9NN703BB)
$3.15

PTO Shaft, Conversion Assembly - PTO conversion assembly. Converts to 1-3/8 inch shaft. Gasket, housing and protective cap. Ford tractors: 600, 700, 800, 900. Includes all necessary parts: Shaft, bearing, bushing, seal for tractors which had factory installed 1-3/8 inch diameter shafts which include the 501, 601, 701, 801, 901, 2000 4 cylinder, 4000 4 cylinder (converts 1-1/8 inch diameter shaft to 1-3/8 inch diameter shaft, 6 spline). Length 32 11/16 inches. (Part No: NCA700-38)
$119.72

PTO Stop - This PTO Stop is used on 3, 4 and 5 speed transmissions. 8N, 9N, 2N, NAA, 500, 600, 700, 800, 900, 501, 601, 701, 801, 901, 2000-4000 4 CYLINDER, 2000, 3000, 3400. (Part No: NAA722A)
$19.44

Snap Ring - The is a PTO housing bearing retaining snap ring. It is used on multiple Ford Tractors using a 1.375 inch PTO. Replaces original part numbers 81809581 and 314267. For tractor models 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000 and 4000. (Part No: 314267)
$2.84

Paint
Paint, Bright Red, 1 Gallon - This Ford Bright Red was used from 1958 through 1962. Those models were the 501, 601, 701, 801 and 901 series. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP310GAL)
$49.36

Paint, Bright Red, 1 Quart - This Ford Bright Red was used from 1958 through 1962. Those models were the 501, 601, 701, 801 and 901 series. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP310QT)
$21.66

Paint, Bright Red, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** This Ford Bright Red was used from 1958 through 1962. Those models were the 501, 601, 701, 801 and 901 series. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP310SP)
$52.25

Paint, Brownish Medium Gray, 1 Gallon - Ford Brownish Medium Gray was used for the same applications as TP240Ford Medium Gray. This is a lighter shade. Since the tractors did not come off the production line all the same, the darker or light shades are completely up to the desires of the customer. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP245GAL)
$58.40

Paint, Dearborn Red, 1 Gallon - For 1958-1962 models. From TISCO, providing OEM quality. Though much darker than TP310 Ford Red, there are many references as to have been used on the same models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP115GAL)
$83.23

Paint, Dearborn Red, 1 Quart - For tractors (1958-1962). Though much darker than TP310 Ford Red, there are many references as to have been used on the same models. From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP115QT)
$25.35

Paint, Dearborn Red, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** For tractors (1958-1962). Though much darker than TP310 Ford Red, there are many references as to have been used on the same models. From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP115SP)
$56.97

Paint, Medium Gray, 1 Gallon - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP240GAL)
$50.83

Seats
Seat Assembly, Black & White - For tractor models 8N, 9N, 2N, 600, 601, 700, 701, 800, 801, 900, 901, NAA. Seat Assembly has a square bottom cushion with slightly curved backrest. This seat is designed to bolt to a U-Shaped spring (Part # 9N404) for a Non-Flip style pan seat. (Part No: CSA888-5)
$134.23

Seat Assembly, Blue - For tractor models 8N, 9N, 2N, 600, 601, 700, 701, 800, 801, 900, 901, NAA. Seat Assembly has a square bottom cushion with slightly curved backrest. Complete seat. This seat is designed to bolt to a U-Shaped spring for a Non-Flip style pan seat. (Part No: CSA887-8)
$139.01

Sheet Metal / Body Parts
Air Cleaner Door - Air Cleaner Louvered Door Restoration Quality. For NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 units before 1965. Replaces NAA-9661-B. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: NAA9661B)
$20.48

Battery Hold Down Kit - This battery hold down kit is for tractor models 8N, 9N, 2N, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000-4000 series (1953-1964). (Verify battery measurements). Center to center mounting holes 10 1/8 inches. For batteries 8 15/16 inches long and 6 13/16 inches wide. (Part No: NCA10718A-KIT)
$22.81

Bumper, Side Panel To Hood - This pad fits between the top of the front side panels and the hood. Used on Ford Tractor models: NAA, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000, 4000 1953-1964. It is glued in place. Replaces original part number NAA88131B. (Part No: NAA88131B)
$4.75

Bumpers 6 Per PKG - Bumper, hood tip center panel rubber bumper kit {6 per pkg}. For tractors: NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 {1953-1957}. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 354177S6)
$5.95

Fender - This fender comes as pictured with mounting bracket. Fits left hand or right hand side on the following tractors: 501, 600, 601, 700, 701, 800, 801, 900, 901, (except hi-clear), 2000, 4000 (1958 thru 1964), 2000, 3000, 4100, 4110, 4200 (1965 to 1975); 2600, 3600, 4100, 4600SU, 231, 335, 420, 515, 531, 532, 535 (1975 to 1981); 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 230A, 530A (1981 to 1990). Additional shipping charge of $15 per fender will be added due to size/weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces 81816643, C5NN16312AK, C5NN16312AU, C5NN16321AK, D5NN16312LR. (Part No: D5NN16312LR)
$134.67

Grill Panel, Lower - For tractor models 801, 811, 821, 841, 851, 861, 871, 881. Sheet metal parts most often come with primer coat. (Part No: 310032)
$109.02

Grill Panel, Upper - For tractor models 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4031 (Part No: 310984)
$116.61

Grill Panel, Upper, Inner - For tractor models 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981. (Part No: 310982)
$74.73

Hood Emblem Housing - For tractor models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. Housing holds emblem and connects side pieces of hood. **WARNING** Fit to tractor before painting. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. This is the same as NCA16613A but not nearly as finished. This part will likely require fill work. NCA16613A is a more finished product. (Part No: 311319)
$101.78

Hood Emblem Housing - This is the same part as 311319 but of higher quality metal work. Less work will be required with this piece when doing a restoration. Fit to tractor before painting. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: NCA16613A)
$124.95

Hood Kit - This 3 piece hood kit does not have the "Ford" script. Does not come with hardware. Includes left, right and center hood pieces. For tractor models: NAA, 600 Series, 700 Series, 800 Series. Replaces B9NN16625A, 312462, 311109, 311452, NCA16617B, 16625, 16626, 16617. (Part No: 16625KIT)
$427.95

Hood Latch Assembly - This Hood Latch Assembly is used with NAA16628C. Two are used per hood. It is used on Ford Tractors NAA, 501, 600, 601, 701, 800, 801, 900, 901, 1801, 2000, 4000 1953-1964. Replaces original part number NAA16645C. (Part No: NAA16645C)
$24.95

Hood Latch Spring - For tractor models Jubilee, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 with 4 cylinder gas engines). (Part No: NAA16925B)
$14.85

Running Board Bracket - Front - For tractor models 8N, NAA, 600, 601, 700, 800, 801, 900, 2000, 4000. All WITHOUT SELECT-O-SPEED TRANSMISSIONS 1948 to 1964. Front running board bracket right OR left side. Price is for EACH bracket. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 8N16470)
$17.50

Toolbox - For 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Toolbox restoration quality. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: NCA17005A)
$40.32

Toolbox, Restoration Quality - Painted Red. For tractor models 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. Restoration Quality Toolbox. Fits between Step Plate and Rear Axle Housing. (Part No: NCA17005A)
$36.66

Top Hood Door Latch - The new top hood door latch is used in Ford Tractors from 1953-1964. Models: NAA, 501, 600, 601, 701, 800, 801, 900, 901, 1800, 1801. It is used with NAA16654C latch assembly. It replaces original part number NAA16628C. (Part No: NAA16628C)
$9.50

Steering
Axle Pin, Flange, Locking - For tractor models with All purpose and LCG front axles 1953 Thru 1964. Fits 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 2000, 4000. All using NCA3127A axle pin. (Part No: NCA3128A)
$12.96

Axle Pin, Threaded - 1.750 inch outside diameter, length is 4.5 inch. For tractor models with All purpose and LCG front axles 1953 thru 1964. Fits 600, 601, 800, 801, 2000, 4000. (Part No: NCA3127A)
$20.70

Belt - Power steering pump belt. For tractor models 600, 601, 700, 701, 800, 801, 900, 901. (Part No: 310050)
$8.83

Bolt, Radius Rod to Front Axle - Length is 5-1/2 inches, 5/8 inch-18 thread. Head outside diameter is 7/8 inches. Fits the following tractors: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000 (up to 1964), 4000 (up to 1964). Two used per tractor. Sold individually. Replaces 957F3415A, 86531713, NAA3415BGV, NAA3415B. (Part No: NAA3415B)
$5.36

Drag Link Dust Cover - Rear tie rod boot with leather insert. Fits tractor models: Jubilee, NAA, NAB, 2000 4 cylinder, 2030, 2031, 2120, 2130, 2131, 2N, 4000 4 cylinder, 4030, 4031, 4120, 4121, 4130, 4131, 600, 601, 800, 801, 8N, 9N. All 4 cylinder 1939 to 1964. 1.425 inch base, .850 inches tall, .700 inch hole. Replaces: 9N3324, A0NN3324. (Part No: 9N3324OE)
$16.50

Drag Link End, Front, Greasable - A= 3.875 inches, B= .687 inches, 18 left hand thread. Manual Steering. For tractor models 8N, 9N, 2N, NAA, Jubilee, NAB, 600, 601, 611, 620, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881 2000(4 cylinder 1/1962 to 12/1964), 4000(1/1962 to 12/1964). Almost exactly the same as 8N3270 except the castle nut end threaded section is 1/16 of an inch longer. (Part No: NAA3270A)
$14.79

Drag Link End, Front, Non-Greasable - This Drag Link End is exactly like the NAA3270A except it is sealed, meaning you never have to grease them! Sealed, A= 3.875 inches, B= .687 inches, 18 left hand thread. Manual Steering. For tractor models 8N, 9N, 2N, NAA, Jubilee, NAB, 600, 601, 611, 620, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881 2000 (4 cylinder 1/1962 to 12/1964), 4000 (1/1962 to 12/1964) . Sold in quantities of 2, PRICE IS FOR EACH. Almost exactly the same as 8N3270 except the castle nut end threaded section is 1/16 of an inch longer. (Part No: NAA3270A-N)
$11.30

Drag Link End, LH - A= 36.44 inches, B= 1.00 inch, .813 inch diameter, 16 UN RH thread. For tractor models (600, 800 serial number 78836 and up), (2000, 4000, all 4 cylinder serial number 78836 and up). Replaces 310083. (Part No: 312871)
$135.61

Drag Link End, Rear - Length 4.250 inches, .687 inch diameter, 18 right hand thread. For tractor models: 8N, 9N, 2N, 2000 4 cylinder 1962-1964, 2031, 2120 1963-1964, 2131, 4000 1962-1963, 4031, 4120, 4131, 600, 601, 800, 801, NAA, NAB. (Part No: NAA33271A)
$14.19

Drag Link Tube - 5.00 inches long. For tractor models 2000, 2031, 2100, 2110, 2120, 2131, 2150, 230A, 231, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 334, 3600, 3611, 3900, 3910, 4000, 4031, 4100, 4110, 4120, 4131, 4600, 4610, 530A, 531, 600, 601, 800, 801, NAA. All with serial number less than 78836. (Part No: C5NN3349A)
$33.83

Drag Link Tube - LH - Drag Link Tube is right hand. Tube measures 38.5 inches long, has 1 right hand thread and 1 left hand thread with inside diameter of 11/16 inch-18 thread. For NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Part No: NAA33315A)
$31.52

Drag Link Tube - RH - Drag Link Tube is right hand. Tube measures 36.125 inches long, has 1 right hand thread and 1 left hand thread with inside diameter of 11/16 inch 18 thread. For NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Part No: NAA3314B)
$32.89

Draglink Clamp - This drag link clamp is used on Ford tractor models 9N, 2N, 8N, NAA, Jubilee, 500, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 and 1801, 1939-1964. It replaces 8N3287. (Part No: 8N3287)
$4.50

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. Fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Major, Power Major, Super Major (without original Ford pump with reservoir on top of pump). Replaces: AE33538A, E101LD9. (Part No: AE33538A)
$7.70

King Pin Repair Kit - This kit will repair both spindles. Kit contains 2 of each of the following 2N3109 spindle bushing, NCA3110A spindle bushing, C0NN3123B thrust bearing, C5NN3125A spindle seal. For tractor models 600, 800, 601, 801, (700, 900, 701, 901, 2000, 4000 all rowcrop with wide front end except hi-clearance). (Part No: S.65107)
$39.08

Lock Nut - Steering Gear Bearing Lock Nut. 1 Inch 16 Thread. Used on 2000, 3000, 4000SU, 2600, 3600, 4600SU, 2310, 2610, 2910, 3610, 3910, 4610SU (1/1981-9/1984), 3400, 231, 335, 531, 532, MAY ALSO FIT 600, 800, 601, 801, 2000-4000 4 CYLINDER (Part No: C5NN3707A)
$9.11

Power Steering Ball Joint - Cylinder end with 7/16 inch internal threads. For OEM and Tisco power steering cylinders E2NN3A5AOBA with 1/2 inch diameter rod and D4NN3A54OA with 5/8 inch diameter rod. For models: 2000, 230A, 231, 234, 2600, 3000, 334, 3600, 4000, 4600, 530A, 531, 601, 801. (Part No: C5NN3A302B)
$18.53

Power Steering Ball Joint Male - This Power Steering Ball Joint end measures 2.125 inches from the end of the threads to the center of the knuckle, and 5/8 diameter threads with 18 threads per inch. Cylinder end. For tractor models 2000, 230A, 231, 234, 2600, 3000, 334, 3400, 3600, 4000, 4410, 4600, 530A, 531, 532, 601, 801. (Part No: E2NN3A540BJ)
$23.15

Power Steering Cylinder - Power steering cylinder is 14 1/4 inches long with 1/2 inch diameter rod, 7/16 inch diameter threaded outer end. For 2000, 230A, 231, 234, 2600, 3000, 334, 3600, 4000, 530A, 531, 601, 801. Comes with cylinder end ball joint E2NN3A540BJ. Rod end ball joint sold separately as part number C5NN3A302B. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. Replaces E2NN3A540A, E2NN3A540BA, E2NN3D547AA, 83955791 (Part No: E2NN3A540BA)
$227.98

Power Steering Cylinder - This power steering cylinder has 5/8 inch diameter rod, 7/16 inch diameter threaded end. Replaces original part numbers D4NN3A540A (right hand) and D4NN3A547A (left hand). Used on 2000, 2100, 2110, 2120 COMPACT TRACTOR, 2150, 230A, 231, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3330, 335, 3400, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340, 4600SU, 4610SU, 530A, 531, 532 SQUARE BALER, 601, 801. OEM numbers D4NN3A540A, D4NN3D574A, E9NN3A540AA. (Part No: D4NN3A540A)
$227.98

Power Steering Cylinder Seal Kit - For Original Equipment with 1/2 inch rod. Fits multiple Ford Tractors using original E2NN3A540BA and E2NN3D547AA cylinders. Models: 600, 601, 800, 801, 2000, 3000, 4000. Replaces Ford repair kit number CAPN3301B. Contains one each of the following: AJ33656A, C1AA3A752A, C0AA3A753A, C1AA3A751A, 371033S. Verify your original equipment manufacturer cylinder part number before order. (Part No: CAPN3301B)
$27.75

Power Steering Pump - This Power Steering Pump is for models 600, 800, 601, 801, 2000, 4000, 701, 901. Gas and Diesel. Replaces C3NN3A691B. Includes mounting bracket, belt and replacement pressure hose. Verify part number if possible as there were more than one type during production runs. (Part No: S.60189)
$650.06

Power Steering Pump Bracket - This power steering pump mounting bracket is for pump part number S.60189 for the following models: 600, 601, 701, 800, 801, 901, 2000, 4000. (Part No: S.60189)
$55.28

Power Steering Pump, Belt Driven - Redesigned pump uses a bearing instead of original bushing. Can be adapted to tractors using Char-Lynn power steering with Eaton pump. Does not include brackets, top mounted reservoir or pulley. Shaft diameter measures .670 inches and the shaft length (where pulley mounts) measures .575 inches. There is a 2 inch thick pump housing (where bracket bolts to). SOME FORD APPLICATIONS WILL REQUIRE A NEW PRESSURE HOSE TO BE MADE FOR 3/8 inch MALE INVERTED FLARE. Pressure is preset at 1.32 GPM. For tractor models (2000, 4000 4 Cylinder), 601, 701, 801, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2111, 2120, 2130, 4030, 4040, 4121, 4130, 4140 1958 to 1964. For tractors with canister on top pump, (700, 740, 900, 950, 960 1955 and UP for tractors with canister on top pump). Replaces: C0NN3A674H and C3NN3A674C. Can be used with ABC1417 or EBJ33556A Pulley. (Part No: S03-1003)
$384.33

Power Steering Shaft and Nut Assembly Before 1965 - For tractor models 601, 801, 2000, (4000 up to 1965). Power Steering Shaft and Nut Assembly. 23 7/8 inch overall length. (Part No: 310859)
$241.50

Power Steering, Cylinder Repair Kit - Kits are for repairing ONLY A & I Products Power Steering Cylinders- Consists of: 6 o-rings, 2 wiper rings, piston seal. For tractor models 2000, 230A, 231, 234, 3000, 335, 3600, 4600, 531, 601, 801. (Part No: E2NN3A540SK)
$28.97

Radius Rod, Ball Socket - For tractor models: Jubilee, NAA, 2000 3 Cylinder, 2000 4 cylinder, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 1811, 1821, 1841, 1871, 1881, 2030, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 2600, 2600V, 2810, 2910, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3600, 3600V, 3610, 3900, 3910, 4000 3 cylinder, 4000 4 Cylinder, 4030, 4100, 4110, 4120, 4121, 4130, 4140, 4410, 4600SU, 8N, 9N, 230A, 231, 233, 234, 333, 334, 335, 340, 530A, 531, 540, 3400, Dexta, Super Dexta. Replaces: 9N3442, E0NN3N442BA, C5NN3N442C, C5NN3N442A, GL139 (Part No: E0NN3N442BA)
$14.85

Radius Rod, Socket Cap - Used with Socket E0NN3N442BA. Replaces: E0NN3N406BA, 8N3440B, C7NN3N406A, 957E3440B, 83924040, 957E3440A, 313319. (Part No: E0NN3N406BA)
$9.60

Sector Shaft Seal - The Sector shaft (pitman arm) seal is used on Ford tractors: 2000, 2110LCG, 231, 233, 2600, 3000, 333, 335, 3400, 3600, 3900, 4000, 4000SU, 4100, 4110LCG, 4600SU, 531, 532, 600, 601, 800, 801, 8N, Jubilee, NAA. Replaces C5NN3C615A D9NN7R510B (Part No: C5NN3C615A)
$3.00

Spindle Bushing - FORD Spindle Bushing - 1.250 inch inside diameter, 1.370 inch outside diameter, 1.500 inches long. Fits many models. Two are used 1955 and later. Four used per tractor 1939-1954. Sold individually. Replaces: 2N3109, 81802940, 957E3109B, C5NN3446A. (Part No: 2N3109)
$3.75

Spindle Bushing - For tractor models 2000 (4-cylinder, 1962-1964), 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2600V, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3300, 3310, 333, 3330, 334, 335, 3600, 3600V, 3610, 3900, 3910, 4000 (4-cylinder, 1962-1964), 4110, 4120, 4140, 4600SU, 530A, 531, 541, 600, 601 Series, 800, 801 Series, Dexta, Super Dexta. Also replaces 81717392, 83928345 and 957E3110B. (Part No: NCA3110A)
$3.23

Spindle Nut - Fits on front spindles. Castle Nut 3/4 inch x 16 UNF. Replaces P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N. (Part No: 387930S36)
$1.04

Spindle, LH - Left hand spindle. Verify measurements of vertical shaft is 10.687 inches tall, 1.25 inches diameter at the top and 1.340 inches diameter at the bottom. For tractor models with 4-cylinder gas engines and using STANDARD or ROW CROP (NOT HI-CLEARANCE) front axles 1955-1964: 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta. Uses bushing kit SBK5364, (wheel bearing kit CBPN1200B if before serial number 137818 No Hub available), or (Wheel Bearing Kit CBPN1200C if after serial number 137818 using Hub C9NN1104F). (Part No: NCA3106B)
$52.37

Spindle, RH - Right hand spindle. Verify measurements of vertical shaft is 10.687 inches tall, 1.25 inches diameter at the top and 1.340 inches diameter at the bottom. For tractor models with 4-cylinder gas engines and using STANDARD or ROW CROP (NOT HI-CLEARANCE) front axles 1955-1964: 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta. Uses bushing kit SBK5364, (wheel bearing kit CBPN1200B if before serial number 137818 No Hub available), or (wheel bearing kit CBPN1200C if after serial number 137818 using Hub C9NN1104F). (Part No: NCA3105B)
$81.42

Steering Arm - For 4100, 2100, 2600, 3100, 3600, 600, 700, 800, 8N, 900, Dexta, Super Dexta NAA, Jubilee. Steering Arm also replaces 310799, 8N3130B, 957E3130. (Part No: 310799)
$38.54

Steering Column Bearing Spring - This Steering Column Bearing Spring is for Tractors without power steering 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948-1964). (Part No: 8N3520)
$2.95

Steering Column Grommet - Models: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4 cylinder 1955-1964), 1801. (Part No: NCA3578A)
$9.40

Steering Column Seal - This Felt Dust Seal is for the top of steering column. Tractors: 8N, through 4000 4 cylinder. (1948-1964). (Part No: 8N3570)
$1.50

Steering Column Spring Seat - For steering column bearing (without power steering). Tractors: 8N and up (1948 to 1964). (Part No: 8N3518)
$3.50

Steering Cylinder Repair Kit - This power steering cylinder repair kit fits Ford steering cylinders with .625 inch rod, includes seals, piston and retainer. (Part No: CAPN3301A)
$22.43

Steering Gear Assembly - Complete manual steering gear assembly with steering arms. Fits 600, 601, 800, 801, (2000 and 4000 1955-1964). Does not fit row crops, high crops or offsets. (Part No: S.67079)
$586.50

Steering Gear Side Cover O-Ring - This Steering Gear Side Cover O-Ring is used on 8N after serial number 216988 and other Ford Tractors 1953-1964. Replaces 8N3581B. (Part No: 8N3581B)
$1.95

Steering Sector Kit - This steering sector kit is for 1 side, 2 kits used per tractor. Kit contains adjuster bolt, nut, washer, O-Rings, shims, and felt seal. (adjuster bolt is allen head type, not slotted like original). For tractor models (8N 1950-1952), jubilee, NAA, 600, 800, 601, 801, 2000, 4000 all before 1965. (Part No: S.67109)
$16.39

Steering Sector Retainer Seal - This Steering Sector Retainer Seal is used on Ford Tractors 1949 to 1964. It replaces D5UZ3591A, 8N3591B (Part No: 8N3591B)
$6.50

Steering Sector Shaft Seal - Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Part No: 8N3586)
$1.50

Steering Shaft & Nut Assembly, Manual - Fits 600, 800, 601, 801, 2000, 4000 (1955- 1963). Does not come with lower bearing. (Part No: NCA3575A)
$115.09

Steering Shaft Bearing - For tractor models up to 1964 including: 8N, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Part No: 8N3571-OE)
$10.35

Steering Shaft Bearing Assembly - For Steering column (without power steering). Ford tractors 1948 to 1964. Replaces 8N3517, C5NN3N716A. For models without power steering NAA, 1801, 2000, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4031, 4040, 4110, 4121, 4130, 4131, 600, 601, 700, 701, 800, 801, 8N, 900, 901 (Part No: 8N3517)
$17.50

Steering Shaft Bearing Cup - For tractor models up to 1964 including: 8N late, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Part No: 8N3552)
$10.35

Steering Shaft Bearing and Cup Assembly - QTY 2 - 1-3/4 inch outside diameter. For tractor models 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000. 1953-1964. Price is for 2 Sets (2 Bearings and 2 races. 2 sets are required per steering shaft/top and bottom. Replaces 8N3571 and 8N3552. (Part No: 8N3505)
$38.52

Steering Shaft Gear Thrust Bearing Retainer - For tractor models 631, 640, 641, 650, 651, 660, 661, 671, 681, 8N, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881. (Part No: 8N33581)
$2.94

Steering Valve - For tractor models 601, 611, 621, 631, 641, 651, 661, 671, 681, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000, except row crops. (Part No: 310863)
$543.94

Steering Wheel Dome Nut Washer - With Beveled edge. For tractor models 8N, NAA, Jubilee, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000 (4 cylinder), 2030, 2111, 2120, 2130. (Part No: 356515S)
$4.21

Steering Wheel Nut, Unfinished - Steering Wheel Nut - Unfinished - Acorn style nut, 11/16 inches. Fits 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (Part No: 351114S)
$6.62

Wheels
Bolt. Front Wheel - This bolt is the Hub to rim bolt. Measures 12 inch x 20 UNF threads, .6 shoulder diameter, 1.346 inch usable length, 1.545 inch overall length. For 2000, 2N, 3000, 4000, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, Jubilee. Replaces 81816078, C5NN1107B, C5NN1107D, C5NN1107E, 78-1107 and 781107. Uses nut part number C5NN1012B. (Part No: C5NN1107E)
$2.25

Front Wheel Bearing Kit - Kit Contains one each: LM67048 (Cone), LM67010 (Cup), LM11949 (Cone), LM11910 (Cup), NCA1190A (Seal). For tractor models 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, 1955-1964 with serial number 137817 and up. Repairs one wheel. For hub C9NN1104F. Parts measure Inner Cone: LM67048 (1.250 inch inside diameter) Inner Cup: LM67010 (2.328 inch outside diameter) Outer Cone: LM11949 (.750 inch inside diameter) Outer Cup: LM11910 (1.781 inch outside diameter). (Part No: CBPN1200C)
$14.10

Front Wheel Nut - These Front Wheel Nuts are 1/2 inch-20. Fits 8N (late), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Priced Each. Replaces C5NN1012B, E1ADKN1012. (Part No: C5NN1012B)
$0.54

Front Wheel Stud Bolt - Front wheel stud bolt measures 1/2 inch X 2 inch.- WITHOUT nuts. Note: Nuts are available by ordering part number C5NN1012B. Fits 8N(late), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: C5NN1107F)
$1.04

Hub, Front Wheel - Tractors: 601, 701, 801, 901, for 6 hole 4.50 inch X 16 inch wheel (1957 to 1964); for 6 hole 4.00 inch X 16 inch wheel. Tractors: 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2810, 2910, 3000 (1965 to 1975), 2600, 3055, 3100, 3120, 3150, 3190, 3300, 3310, 3550, 3600, 3900, 3910, 4000, 4100, 4110, 4140, (1975 to 1981), 2610, 3610 (1981 and up). Uses bearing and seal kit FW93-WS; wheel bolt C5NN1107F and nut C5NN1012B. Replaces 95731110, C5NN1104B. (Part No: C9NN1104F)
$42.63

Lug Nut, Rear Wheel - 5/8 inch, uses a 1 1/16 inch wrench. Fits the following Models built from 1948 to 1964: 8N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 2000, 4000, Dexta, Super Dexta. (Part No: 8N1134)
$1.74

Rear Rim Bolt Kit - This rear rim bolt kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Replaces: 33806S34, 33806S36, 33806S7, 350719S8, 370938S36, 370938S43, 408, 81821369. (Part No: 350719KIT)
$23.95

Rear Rim Carriage Head Bolt and Nut - 2.5 inches in length, 5/8 inch diameter FF Carriage Head Bolt with nut. UNIVERSAL - verify length. (Part No: HB250)
$3.75

Spindle Tab Washer - This tab washer is used on Ford Tractors 1939-1964. It replaces original part numbers C5NN1N195A, 81811561 (Part No: C5NN1N195A)
$0.74

Wheel Bearing Kit - This front wheel bearing kit contains inner bearing 8A1201B, inner race 8A1202A, outer bearing 8A1216A, outer race 8A12127A and seal 19263. For models 600, 800, 700, 900 series. Verify part numbers as these models had more than 1 different front end. (Part No: CBPN1200B)
$20.18

Wheel Stud, Rear - 5/8 inch-18 thread, .690 inch outside diameter on serration, length (without head) is 1- 15/16 inches. For tractor models: 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, (4000 1958-1964). Must be ordered in quantities of 8, priced individually. (Part No: 312696)
$2.19



Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: MIS3127)
$239.98

Brakes
Brake Rivet Tool - Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4 inch throat, 1/8 inch diameter rivet punch. (Part No: RIVET_TOOL)
$33.61

Brake Rivet Tool, Large - Larger version of our Brake rivet tool. 3-3/8 inch deep throat x 2-1/8 inch high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET)
$95.23

Cooling System