FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ferguson TO-35 Tractor Parts

[Categories] [All Ferguson Models] [Print]

Brakes

Actuator and Latch Kit - With spring and clevis pin. For tractor models TO35, FE35, F40, MH50, 50, (65 up to serial number 692932), 135, 150, 230, 235, (240 up to 2/1995), (283 Brazil), 20, 20C, 30B, 30D, 35 Turf and Utility, (40, 40B, 50C, 50D with instant reverse transmission), 50. Replaces 181450M1, 181449M1, 180809M1, 181149V1. (Item #: 169743, Ref: 181450M1) $16.80

Brake Adjuster Assembly - Brake Adjuster Assembly. This part measures 4 1/4 inches at it's shortest length, fully screwed together. If you need a shorter one, the threaded side can be cut to make a shorter piece. Also can replace early type brake adjusters. Fits TEA20, TEF20, TO20, TO30, TO35, FE35, 165 UK, 178, 240, 50F, 50H, 60H, 35 UK. Replaces 1850213M91. (Item #: 166242, Ref: 1850213M91) $22.60

Brake Drum - Brake drum 16 inch outside dia 4 1/2 inch hub diameter. For tractors: TO35, MF35, F40, MH50, MF50, MF135 (except orchard), MF150, MF230, MF235 (except orchard), MF240, MF245 (except orchard). Industrials: 20, 20C, 20D, 30 turf, 35, 40, 202, 204, 2135, 2200, 3165. Uses two 182278M1 retaining screws per drum (not included). Replaces 181230M1, 827707M91, 827707M7, 827707M6, 827707M3, 825631M91, 822707M5, 8207707M4, 181230M1, 827707M1, 827707M4, and A827707M5. (Item #: 105637, Ref: 827707M5) $93.00

Brake Drum Retaining Screw - This Brake Drum Retaining Screw Measures 1/2 -13 NC x 3/4 inches. Four are used per tractor, sold individually. If you order 1, you are only going to get one screw. It is used on the following with shoe style brakes: 2200, 2135, 3165, 20C, 20D, 30, FE35, TE20, TEA20, TO20, TO30, F40, TO35, 130, 20, 202, 204, 35, 135, 148, 150, 230, 231, 240, 245, 340, 35, 50, MH50, 550. It is used with 827707M5 Break Drum. Replaces: 182278M1, TO1127. (Item #: 125739, Ref: 182278M1) $1.90

Ferguson TO35 Brake Linkage and Related Components

Brake Linkage and Related Components - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability. For TO35, F40, FE35.

NOTE

Brake Pedal Lock - For tractor models 135 UK, (202 gas), (203 diesel), 20D, 20F, 240, 240S, 250, 253, 30E, 35, 40E, (50 serial number up to 533414), (65 serial number up to 692932), FE35, TO35. (Item #: 173120, Ref: 181960M1) $14.20

Brake Pedal, (RH) - For tractor models TO35, F40. See 1 in picture. (Item #: 182809, Ref: 181961M1) $83.00

Brake Pedal Shaft - This Brake Pedal Shaft is used on Ferguson F40, TO35, Massey Ferguson 135, 150, 3100, 3165, 20, 2135, 30, 35, 50, Massey Harris 50. Replaces 181959M1, 1860802M1, 200191M1 (Item #: 180160, Ref: 1860802M1) $43.20

Brake Pedal Shaft Bushing - For Massey Ferguson tractor models TO35, 35, 35X, 50, 65, 135, 150, 165, 175, 178, 230, 235, 240, 245 (s/n 9A349239-earlier), 250, 253, 263, 265, 265S, 271, 281, 282, 283, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30E, 31, 40, 40E, 202, 203, 2135, 3165, Replaces Massey Ferguson OEM number 195910M1, (Item #: 150916) $13.40

Brake Shaft, Bushing - 1-3/8 inch x 1-1/2 inch x 1-7/16 inch. For tractor models TE20, TO20, TEA20, TO30, TO35, FE35, F40, 1080, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 285, 35, 50. (Item #: 150915, Ref: 180801M1) $8.40

Brake Shoe Set - 4 brake shoes with linings bonded for 20, TO35, 35, F40, 50, 135, 150, M230, MF235 Standard and Orchard, MF245, (2 wheel set). Replaces 830480M93, 830480M92, 830480V93 (Item #: 105625, Ref: 830480M93) $90.00

Spring, Parking Brake Latch - For tractor models F40, FE35, TO35, 1080, 1085, 135, 135 UK, 150, 165, 165 UK, 175, 175 UK, 178, 20, 230, 235, 240, 282, 30, 3165, 65, 35, 35 UK, 40, 50, MH50. (Item #: 173676, Ref: 180809M2) $5.20

Clutch

Clutch Alignment Tool - Clutch alignment tool for 1 3/8 inch 10 spline disc and .67 inch pilot hole. For tractor models: TO20, TE20, TEA20, TO30, TO35. (Item #: 119892, Ref: 1112-5996) $11.70

No
Picture
Clutch Alignment Tool - Dual Stage Clutch Alignment Tool with 1 1/8 inch by 10 splines and 1 5/8 inch by 25 splines. For tractor models 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 175UK, 178UK, 180, 20, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240P, 240S, 245, 253, 255, 261, 263, 265, 265S, 270, 271, 271X, 271XE, 275, 281, 281X, 281XE, 282, 283, 285, 285S, 290UK, 30, 30E, 3165, 35, 40E, 383, 390, 481, 670, 690, 50, 65, 97, TO35. (Item #: 119890, Ref: 1212-5955) $16.90

Clutch Alignment Tool - Clutch alignment tool for 5/8 inch Pilot, 1st stage 1 1/8 inch with 10 splines, 2nd stage 1 3/4 inch with 10 splines. (Item #: 114714, Ref: 1212-1600) $21.00

Clutch Disc - Clutch disc, for 11 inch Dual Clutch 1.125 inch spline diameter, 10 spline in TO35 to serial number 177394 and 177520 thru 177537; F40, and MH50 to serial number 536199; early production. Replaces 182841M92, 182841M91, 899971M91 (Item #: 107488, Ref: 182841M92) $77.00

Clutch Disc, 11 Inch - 10 spline, 1.125 inch hub. For all MF tractors with 11 inch DUAL Clutch, EXCEPT for TO35: (to serial number 177394 and 177520 thru 177537); F40, MH50. Tractors: TO35 late production, 35, 50, 65, 135, 150, 165, 175, 180, M230, MF235, MF245, MF255, MF265, MH50, industrials: 20, 20C, 30, 30B, 30D, 40B.. Will replace 890302M91. (Item #: 112308, Ref: 516068M91) $43.80

Clutch Disc - 6 Pad - For Massey Ferguson tractor models TO35, 35, 50, 65, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 2200, Compatible with Massey Ferguson Construction and industrial models 20, 30, 30B, 30D, 40, 40B, 202, 203, 302, 2135, 3165, Replaces Massey Ferguson OEM number 184542M91, 185892M94, 193141M91, 516068M91, 516068M93, 890302M91, Clutch Diameter: 11", Clutch Hub Diameter: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 6 Regular Pads, (Item #: 122774) $164.00

Clutch Disc, 9 Inch - 10 spline on a 1 3/4 inch hub diameter. PTO Clutch Disc For 20, 30, 40, F40, MF135, MF150, MF165, MF175, MF180, MF35, MF50, MF65, TO35. (Item #: 163114, Ref: 3620411M91) $52.00

Clutch Disc, 9 Inch - Clutch disc is 9 inches in diameter with 10 splines on a 1 1/8 inch hub. Used on models 135, 2135, 35, 50, TO35, TE20, TEA20, TO20, TO30, Colt, Mustang, Massey Harris 22, Massey Harris 30 with single clutch. Replaces 760260M91, 180241M91, 180250M91, 181114M91, 193621M91, 825495M91 (Item #: 119397, Ref: A44512) $59.00

Clutch Disc, Remanufactured - For Massey Ferguson tractor models TO35, 35, 50, 65, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 2200, Compatible with Massey Ferguson Construction and industrial models 20, 30, 40, 202, 203, 302, 2135, 3165, Clutch Size: 11", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 6 Reg Pads, (Item #: 206742) $149.00

Clutch Disc, Remanufactured, 180241M91 - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 35, 50, 135, Compatible with Massey Ferguson Construction and industrial models 202, 203, 2135, Replaces Massey Ferguson OEM number 180241M91, 180250M91, 181114M91, 183357M91, 193621M91, 825495M91, Clutch Size: 9", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 4 Reg Pads, (Item #: 206747) $116.00

Clutch Disc, Remanufactured, 180241M91 - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, Replaces Massey Ferguson OEM number 180241M91, 180250M91, 181114M91, 183357M91, 193621M91, 825495M91, Clutch Size: 9", Clutch Hub: 1-3/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 4 Reg Pads, (Item #: 206760) $105.01

Clutch Fork Shaft, LH - This Clutch Fork Shaft is the left (long) side. It measures 1 inch in diameter by 5-17/32 inches long. It is used with: 184592M1 bushing, 886719M1 fork and 180449M1 RH shaft (each sold separately). Replaces 180444M1, 180444M2, 1679460M1 (Item #: 166103, Ref: 180444M1) $14.60

Ferguson TO35 Clutch Housing and Related Parts

Clutch Housing and Related Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability. (1)= p/n 183129M2 or 886727M4, (2)= p/n 886673M1, 195503M1, (3)= p/n 1867223M1, (4)= p/n 180434M1, (5)= p/n 195494M1, (6)= p/n 180444M2 or 1679460M1, (7)= p/n 180449M1, (8)= p/n 184592M1, (9)= p/n 180801M1, (10)= p/n 180511M2, (11)- p/n 195523M1.

NOTE

Clutch Kit - Clutch Kit contains 181114M91 drive disc that measures 9 inch outside diameter with 1 1/8 inch 10 spline hub, 183209M91 9 inch single pressure plate, 832960M3 pilot bearing, and 195207M1 release bearing and 10 spline x 1 1/8 inch pilot tool. Will not fit on input shaft with 1 3/8 inch 10 Spline end. Note: for TO35 see part number 833085M2 bearing, you may need kit 184827. Replaces 1800263M91, 180263M91, 181114M91. (Item #: 119387, Ref: 1212-1610) $163.00

Clutch Kit - Kit contains 181114M91 drive disc 9 inch outside diameter with 1 1/8 inch 10 spline hub, 183209M91 9 inch single pressure plate, 832960M3 pilot bearing, release bearing 833085M2 (Note: This Release Bearing is 2.49 inches I.D., 4.10 inches O.D., .875 inches wide, 1.535 inches front to back.), and 10 spline x 1 1/8 inch pilot tool. (Item #: 184827, Ref: M185923N833085) $210.00

Clutch Kit, 11 inch, Fine Spline - Our new 11 inch complete clutch kit contains: 11 inch, 25 spline, 1.625 inch hub, standard spring, double pressure plate (532319M91). 11 inch 10 spline, rigid drive disc (516068M93). 9 inch 1 3/4 inch hub PTO disc. Pilot bearing measuring 1.57 inches outside diameter, 0.669 inch inside diameter, 0.472 inch width (832960M3). Release bearing measuring 4.06 inches outside diameter, 2.49 inches inside diameter and 0.870 inch width (892862M2). Clutch alignment tool. For tractor models 135, 150, 165, 175, 175 U.K., 178 U.K., 180, 20, 20C, 2135, 235, 245, 255, 265, 30, 3165, 35, 50, 65, 97, TO35. (Item #: 111060, Ref: 1212-1420) $315.00

Clutch Kit, Dual, Coarse Spline - Includes NEW: 526666M91 Pressure Plate is 11 inch and 10 spline, 516068M93 Clutch Disc is 11 inch and 10 spline, Release and Pilot bearings, and clutch alignment tool. Fits the following tractors that use a 10 spline PTO disc: 135, 150, TO35. This part is for a late production T035 (Serial number 177537 and above). This unit will not fit early production TO35 with stamped finger clutch. Not for Deluxe models. (Item #: 111063, Ref: 1212-1400) $317.00

No
Picture
Clutch Kit, Remanufactured, 516068M93 - For Massey Ferguson tractor models F40, TO30 (S/N 177395-177519 and S/N 177538-later), TO35 (S/N 177395-177519 and S/N 177538-later), 35 (S/N 245087-later), 50, 65, 135, 150, 2135, Compatible with Massey Ferguson Construction and industrial models 20 (IND S/N DC2061-later), 202, 203, 302, 304, Replaces Massey Ferguson OEM number 516068M93, 526665M91, Clutch Diameter - 11", Clutch Hub Diameter - 1-1/8", Clutch Splines - 10, Clutch Center - Solid Offset, Clutch Type - Woven, Pressure Plate Size - 11", Pressure Plate Levers - 3, Pressure Plate Springs - 9, Pressure Plate Hub Diameter - 1-3/4", Pressure Plate Splines - 10, For a New version of this sku use Item #: 122859, Additional Handling and Oversize Fees Apply To This Item, (Item #: 202053) $410.01

Clutch-Pressure Plate, Dual - Clutch Pressure Plate Assembly for models: Ferguson F40, TO35 (S/N <177394), Massey Ferguson 50 (S/N <515433), Massey Harris 50MF 50 serial number before 515395. Comes with 9 inch PTO Disc. DOES NOT come with 11 inch Clutch Disc part number 182841M92. Has stamped fingers. All having a 1.140 inch flywheel offset (Item #: 172360, Ref: 182463M93) $595.84

Clutch Release Carrier Fork Locking Screw - This Clutch Release Carrier Fork Locking Screw is used to secure the release fork to the shaft on many Massey Ferguson models. Two used per tractor. Sold individually. It replaces Massey numbers: 881114M1, 881144M1, 881144M2, 3771408M1, 3790757M1, 180002M1 (Item #: 182943, Ref: 881144M1) $5.10

Clutch Release Shaft - For tractor models 1200, 135, 135UK, 148, 165, 168, 175, 178, 178UK, 185, 188, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 290, 298, 30B, 30D, 30E, 30H, 35, 35X, 375E, 390E, 40, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 60H, 65, TO35, MH50. This Shaft is 1 inch diameter X 3 19/32 inches long. (Item #: 165437, Ref: 180449M1) $8.30

Clutch Release Shaft - For tractor models FE35, TO35, 165, 180, 20F, 240, 250, 270, 275 UK, 290 UK, 35, 40E, 50, 50E, 65. This shaft is 1 inch diameter x 5 17/32 inches long. Also replaces 1679460M1. (Item #: 166103, Ref: 180444M2) $14.60

Clutch Shaft, Bushing - 1 inch x 1-1/16 inch x 3/4 inch. For tractor models TE20, TO20, TEA20, TO35, FE35, F40. Replaces 1321, 184592M1, 180802M1, 184 592M1 (Item #: 165433, Ref: 184592M1) $5.50

Input Housing - For tractor models FE35 and TO35 with standard 6 speed. Note: When replacing original housing 180428M2, also use Release Bearing Carrier, part 112309. (Item #: 179108, Ref: 1867223M1) $71.00

Pressure Plate, 11 Inch - For 20C, 20, 30B, 30D, 30, 40B, 40, MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF35, MF50, MF65, TO35 (Late production) (Item #: 182796, Ref: 1040884M1) $83.00

Pressure Plate Assembly - For Massey Ferguson tractor models TO35, 35, 50 (s/n 515433 - later), 135, 150, 2200, Compatible with Massey Ferguson Construction and industrial models 20 (Transmission s/n DC2062 - earlier), 40, 202, 203, 2135, Replaces Massey Ferguson OEM number 886384M91, 1034195M92, 184541M91, 193930M92, 512355M91, 526666M91, 526666V91, 533795M91, 886384M93, Pressure plate size: 11", Pressure plate levers: 3, Pressure plate springs: 6, Pressure plate hub: 1-3/4", Pressure plate splines: 10, Pressure plate type: Dual stage, For 12 spring pressure plate use Item #: 122846, (Item #: 169256) $241.00

Pressure Plate Assembly, Remanufactured - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 50, 135, 202, 203, 2135, Pressure Plate Size: 9", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, (Item #: 206882) $95.01

Pressure Plate Assembly, Remanufactured - For Massey Ferguson tractor models TO30, TO35, 35, 50, 65, 135, 150, 202, 203, 302, 304, 2135, 2200, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 10, Pressure Plate Type: Dual Stage, (Item #: 206883) $240.01

Pressure Plate Assembly, Remanufactured, 1034195M92 - For Massey Ferguson tractor models TO35, 35, 50 (s/n 515433), 135, 150, 2200, Compatible with Massey Ferguson Construction and industrial models 20 (Transmission s/n DC2062 - earlier), 40, 202, 203, 2135, Replaces Massey Ferguson OEM number 1034195M92, 184541M91, 193930M92, 512355M91, 522666M91, 533795M91, 886384M91, 886384M93, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 10, Pressure Plate Type: Dual Stage, For a New version of this sku use Item #: 122846, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206853) $273.01

Pressure Plate Assembly, Remanufactured, 180263M91 - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 35, 50, 135, 202, 203, 2135, Replaces Massey Ferguson OEM number 180263M91, 185923M91, Pressure Plate Size: 9", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 119390, (Item #: 206881) $111.01

Pressure Plate Assembly, Remanufactured, 184543M91 - For Massey Ferguson tractor models TO30, TO35, 35, 50, 65, 135, 150, 202, 203, 302, 304, 2135, 2200, Compatible with Massey Ferguson Construction and industrial models 40, Replaces Massey Ferguson OEM number 184543M91, 193931M92, 512356M91, 526665M91, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 10, Pressure Plate Type: Dual Stage, For a New version of this sku use Item #: 122859, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206884) $259.50

Pressure Plate Cover Assembly, 9 inch single - Pressure Plate Assembly - 9 inch single. (Rockford) For the following tractors using Continental Z120, Z129 or Z134 engines: MF 135, 205, 20C, 2135, 35, 50, 72, 82, F40, MH20, MH30, TO20, TO30, TO35. (Item #: 119390, Ref: 180263M91) $155.00

PTO Disc, 9.055 - 9.055 inch rigid disc, organic, spline diameter 1.75 inch 10 spline. For tractor models 130, 135, 165, 175, 180, 20, 202, 203, 2135, 2165, 2200, 245, 25, 255, 265, 290, 30, 302, 30B, 30D, 3165, 35, 40B, 50 serial number 515396 and up, 65, TO35 serial number 177395-177519 and 177538 and above. All with dual clutches. Replaces 1034195M1, 1539020C1, 1753753M1, 1753753M94, 1753753M94-A, 181102M92, 1851652M92, 323022046, 323022047, 3620411-RF, 3620411-RO, 3620411M1, 3620411M91, 392492R91, 709640R92, 899823M91. (Item #: 163114, Ref: 323022047) $52.00

PTO Disc, 9 Inch - 10 spline on 1.750 inch hub. For tractor models 135 dual, 165 dual, 175 dual, 180, 20 dual, 202 dual, 203 dual, 204, 2135 dual, 2165 dual, 2200 dual, 30, 302 dual, 30B dual, 3165 dual, 35 dual, 50, 65, F40 dual, TO35 dual. Replaces 1753753M91, 1753753M92, 1753753M93, 1753753M94, 3620411M91, 3620411V91 (Item #: 113815, Ref: 1753753M94) $41.10

Release Bearing - Bearing, clutch release, 2.49 inch inside diameter, 4.10 inch outside diameter, 1.5265 inches wide. For single clutch tractors: TO35, MF35, F40, MF50, MF65, MF135 industrials: 2135, 3165. (A2336-37/A2336-147) For 2135, 3165, F40, MF135, MF35, MF50, MF65, TO35, 202, 203, 302, 304. Replaces 833085M1, 833085, 180505M2, N2336-147 (Item #: 168448, Ref: 833085M2) $173.94

Release Bearing - Release Bearing for Single and Dual Clutch, 2.50 inch inside diameter, 3.936 inch outside diameter. For tractor models 350, 352, 355, 360, 362, 365, 375, 390, 390T, 398, 399, 40, 40B, 40D, 40E, 50, 50B, 50D, 50E, 50EX, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60H, 65, 670, 690, 698, 698T, 699, F40, TO35. Replaces original part numbers 195508M1, 892862M1, 892862M2 and 256179M1. (Item #: 112189, Ref: N1585) $23.20

Release Bearing Carrier - Carrier, for clutch release bearing. Carrier bore 2.130 inch (2-1/8 inch approximate); outside diameter 2.503 inch (2-1/2 inch). PLEASE CHECK CARRIER BORE BEFORE ORDERING. For single or dual clutch. Tractors: TO35, MF35, MF50, MF65. Industrials: 20, 202, 203, 302, 2135. Use with bearing 892862M2 for DUAL CLUTCH ONLY. This is the old style for retainers with bronze bushing. (Item #: 165363, Ref: 183129M2) $21.70

Release Lever - For tractor models 150, 20C, 20, 30B, 30D, 30, 40B, 40, MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF35, MF50, MF65, TO35. (Item #: 182186, Ref: 899818M2) $17.50

Cooling System

Fan, 6 Blade - 15.250 inch diameter, 1.0625 inch pilot hole, 1.750 inch bolt hole center to center. For tractor models 150, 202, 204, 2200, 35, 50, TE20, TO20, TO30, TO35. With Continental Gas Engine. (Item #: 121690, Ref: 181522M91) $65.00

Fan Belt - Outside length 42.5 inches long. For tractor models TO35 4 cylinder gas, 35 4 cylinder gas, 50 4 cylinder gas, 150 4 cylinder gas, MH50 4 cylinder gas, 2500 diesel, 202 4 cylinder gas, 204 4 cylinder gas, 2135 4 cylinder gas, 2200 4 cylinder gas, 302 4 cylinder gas, 304 4 cylinder gas, 135 4 cylinder gas. Replaces 509572M1GV, 181523M1, 189865M1, 191442M1, 509572M91, 509572V1. (Item #: 151990, Ref: 509572M1) $12.20

Fan Blade - This fan is 4 blade, 15 inch diameter, 1 1/16 inch pilot hole. For Continental Gas Engine models 135, 150, 202, 204, 2200, 35, 50, TE20, TO20, TO30, TO35. (Item #: 121691, Ref: 181522M91-4) $55.00

Fan Blade - Replaces 825181M91. 15 1/2 inch diameter fan fits: (35, 50 both with Perkins Diesel), (TE20, TEA20 both with 80, 85, or 87mm Gas), (TO35 with 23C Diesel), (FE35 with 87mm Gas or 23C Diesel). Fan Blade, trapezoidal bolt pattern. Bolt pattern 1 1/4 inch between top holes, 1 1/2 inch between bottom holes, 5/16 inch holes with 1 1/8 inch center cutout. (Item #: 121692, Ref: 186819M91) $30.70

Fan Blade, 4 Blade - 15.5 inch diameter, bolt pattern is 1.25 inch x 1.5 inch (not square). Used with 1885489M92 water pump. For tractor models 135 UK with A3.152 diesel engine, FE135, FE35, TO35. Replaces 194046M91, 194046V91, 194946M91, 3638250M91, 3638342M91, 521031M91 and 825181M91. (Item #: 121692, Ref: 3638342M91) $30.70

Gasket, Thermostat Body - For tractor models TO20, TO30, TO35, MF35. (Item #: 173218, Ref: 181528M1) $2.70

Gasket Thermostat Or Water Outlet Elbow - Gasket, water outlet elbow. Tractors: TO35, MF35, and MF50. (Item #: 155327, Ref: 181526M1) $2.50

Hose Clamp - This hose clamp is used as a radiator hose and a air cleaner hose. It fits hoses with an outside diameter 1 3/4 inches to 2 inches. Check hose diameter before ordering. (Item #: 178164, Ref: 608287) $3.70

Radiator - For tractor models TE20, TEA20, TO20, TO30, Z120, Z129, Z134 gas engines. Will fit the late TO35 after serial number 204182. This radiator has 5 fins per inch and 3 rows of tubes. It is 17.312 inches tall and the core size is 15.062 inches wide. This radiator fits multiple Massey Ferguson Tractor models. (NOTE: replaces VPE3033, 181623V1) Top mounting bracket is centered. Uses cap part number 180224M91. (Item #: 101791, Ref: 181623M1) $200.00

Radiator - For tractor models FE35, TO35, MF135, MF203, MF205, MF35 and MF35 UK. All with A3.152 Perkins Diesel engines. It is 17.5 inches tall and the core size is 15 inches wide. Replaces: 186732M91. OVERFLOW TUBE AND PETCOCK NOT INCLUDED. (Item #: 101792, Ref: 894319M92) $217.00

Radiator - For TO-35, serial number 204181 and before. Gas only. This radiator has 8 fins per inch and 3 rows of tubes. Overall height is 23.5 inches. Overall width 16 inches. Core height 17.5 inches. Core width 15.25 inches. Replaces 180291M1. (Item #: 101889, Ref: 180291M1) $280.00

Radiator, Bypass Hose - .906 inch inside diameter. For tractor models 35, 35X, TO35. (Item #: 159588, Ref: 826199M1) $8.10

Radiator Cap - 7 pound pressure radiator cap. Cap measures 2.328 inches diameter less finger tabs. Inside diameter is 2.215 and 1.970 inches between locking tabs. Replaces 184528M1, 184528M91, 184528M1. Fits 135, 150, 165, 175, 180, 235, 240, 255, 35, 50, MH50, 65, 85, 88, TO20, TO30, TO35. (Item #: 112331, Ref: 180224M91) $6.81

Radiator Hose, Lower - Hose, radiator lower. For Continental Gas Engine in tractors: TO35, MF35, MF135 industrials: 202, 204, 2135. 1.85 inch outside diameter, 1.50 inch inside diameter, 10.70 inches long. For 135, 202, 204, MF135, MF150, MF35, TO35. (Item #: 108421, Ref: 180783M1) $9.30

Radiator Hose, Lower - With standard 23C engine. 1.375 inch inside diameter. For tractor models 135UK, FE35, TO35. (Item #: 159591, Ref: 826988M1) $11.00

Radiator Hose - Upper - For Massey Ferguson tractor models TO35 (s/n 204181-later), 35, 135 (UK), 230, 231, 240, 241, 250, 253, 265, 275, 565, 575, Replaces Massey Ferguson OEM number 186826M1, Replaces JCB OEM number CTJ3105, 10329404, Fits Engines: 4.236 and A4.236, ID: 1.375", ID: 1.437", Length: 6", For Hose Clamp use Item #: 130453, (Item #: 108423) $7.50

Radiator Hose, Upper - 5 1/2 inches long and 1 1/2 inches diameter. For tractor models TE20, TO20, TO30, TO35, F40, (50, 65 with Continental Engine), (35, 50, with Perkins Diesel), (135 with Perkins Gas or Diesel), (230 serial number 243032 and up), (235 with Perkins Diesel), 20, 2135, 50, 2500 gas Z120, Z129, Z134. PLEASE NOTE: You may receive a longer piece up to 8 1/2 inches long and you can cut-to-fit. (Item #: 110453, Ref: 180085M1) $6.20

Radiator Hose, Upper - 1.50 inch inside diameter. For tractor models (FE35 with 23C Diesel Engine serial number up to 7704), (TO35 with Standard Diesel Engine). (Item #: 159592, Ref: 827496M1) $4.40

Radiator Mounting Pads, Pack of 2 - This pack of 2 radiator mounting pads is for tractor models 135, 20, 2135, TO35, 35, 230, (235, 245 except orchard), 240, 250, 253, 20C turf, 20D, 30E, 35, 40E, 202, 203, 204, 205. Two are used per tractor on the bottom of the radiator. (Item #: 109978, Ref: 180705M1) $2.40

Thermostat - Thermostat. For Continental Gas Equipped tractors: 2200, 202, 204, 2135, 3165, F40, TO35, 50, 2500, 302, 304, 356, 135, 150, 165, 175, 180, 35, 65, 35, Colt, MH21, MH20, MH22, MH50. 160 degree. Comes with gasket. Replaces 830842M91, 836000V91, 836000M1, 830842M91, 830685M91, 184406V2, 181566M1 (Item #: 108422, Ref: 836000M91) $13.80

Thermostat,180 Degree - For: F40, FE35, TEA20, 150, Deluxe, TO35, 1080, 1085, 1100, 1105, 1130, 1135, 130, 135, 148, 150, 154, 1545, 165, 168, 175, 187, 185, 188, 20, 202, 203, 204, 205, 20C, 20D, 20E, 2135, 2200, 2244, 230, 235, 240, 245, 250, 2500, 253, 254, 255, 265, 275, 285, 290, 298, 30, 30B, 30E, 30H, 320, 35, 350, 35X, 360, 362, 40, 40E, 4500, 470, 4830FC. Replaces 1446165V91, 1446127M1, 1446165M1, 1446127V91, 2485648, 1894961M1, 2485659, 325505M2, 32550, 1446165M91, 1446127M91, 2485666, 40085, 826306M1, 828139M1, 886000M1 (Item #: 110084, Ref: 1446165M91) $8.00

Upper Radiator Hose - New upper radiator hose with an inside diameter of 1.532 inch and 8.625 inch in length. This radiator hose fits multiple Massey Ferguson Tractor models. (Item #: 134505, Ref: 182345M1) $8.50

Water Pump Gasket - For Massey Ferguson tractor models F40, TO35, 35, 50, 135, 150, 230, 235, 245, 2200, Compatible with Massey Ferguson Construction and industrial models 20C, 30B, 202, 203, 204, 205, 2135, 2200, 2500, 4500, Replaces Massey Ferguson OEM number 1750079M2, (Item #: 163002) $2.30

Water Pump Housing to Block Gasket - Used on Continental Engines, this gasket goes between the water pump housing and engine. Used on Massey Ferguson models: 20C, 202, 204, 2135, 30B, TE20, TO20, TO30, TO35, 135, 150, 230, 235, 245, 35, 50 (Continental Gas only) (Item #: 173646, Ref: 1750077M1) $2.30

Water Pump Hub - Hub only. Fits (TEA20 Standard Motors 80, 85mm Gas), (TEF20 Standard Motors 20C Diesel), (FE35 Standard Motors 87mm Gas, 23C Diesel), (TO35 Standard Motors 23C Diesel). (Item #: 182613, Ref: 825377M1) $24.70

Water Pump Pulley - For TO35, 35, 135, 202, 204, 230, 235, 245, 2135, 2200. All with CONTINENTAL Gas engines. (Item #: 111273, Ref: 1750081M1) $48.30

Water Pump, Remanufactured, Z129K42 - For Massey Ferguson tractor models TO35, 35, 50, 135, 150, 202, 204, 230, 235, 245, 2135, 2200, 2220, 2500, Compatible with Massey Ferguson Construction and industrial models 20, 30, 40, 50, Compatible with Massey Harris tractor models 50, Replaces Casting number Z129K42, Impeller 2-3/4", Includes Mounting Gasket, Without pulley or hub, (Item #: 206975) $54.01

Water Pump Seal - For models TEA20 with Standard Motors 80 or 85mm Gas Engines, FE35 with Standard Motors 87mm Gas or 23C Diesel Engines, TO35 with Standard Motors 23C Diesel Engine. Replaces 1446130M1. (Item #: 180661, Ref: 825374M1) $14.50

Water Pump, Standard Engines - Water Pump for 135 UK, FE35, TO35, TEA20, TED20, TEF20, FE20 with STANDARD DIESEL or GAS ENGINES. Water Pump REPLACES 1885489M92-R, 110779, DA10779. Casting number 1881805M91. (Item #: 116837, Ref: 1885489M92) $51.00

Water Pump, without pulley - This pump has a 2 3/4 inch impeller. For tractor models 35, TO35, F40, 35, 50, MH50, 202, 204, 2135, 2200, 2500 forklift, All with Z134 Continental gas engine. Includes gasket. Works with 1750081M1 or 1751852M1 pulley, depending application. Replaces original part numbers 830691M91, 830691M1, 830691M91-R, 830514M91. (Item #: 101970, Ref: 830691M91) $43.20

Water Pump, With Pulley - This Water Pump has a 2 3/4 inch impeller. For tractor models 35, TO35, F40, 35, 50, 135, 202, 204, 230, 2135, 2200, 2500 forklift, All with Z134 and Z145 Continental gas engine. Includes gasket. Replaces 1750081M1 pulley and 830691M91 pump. (Item #: 184540, Ref: 830691M91_WP) $108.00

Decals and Emblems

Decal Set, Ferguson System - Left and right hand decals. For model TO35. Replaces 196200M1, 196211M1. (Item #: 183583, Ref: S.43570) $9.70

Decal Set, TO35 Deluxe, Vinyl - For Massey Ferguson tractor model TO35 (Deluxe), Vinyl decals, (Item #: 102541) $93.00

Engine Serial Number Tag, Blank - Comes with 4 rivets, black anodized aluminum, 3.885 inches long, 1.885 inches high, customer must stamp the number. For tractor models TO35, 35, F40, Early 135, 202, 203, 204, MH50, 2135. For all models with 4 cylinder Z134 Continental Gas Engine. (Item #: 178545, Ref: MFSNTAG) $33.70

Hood Emblem - For MF35 and (TO35 Serial number 176341 and up). Front Emblem "Ferguson" shield. Chrome, red background. Replaces: Casting Number: 180661M1, 183194M2 (Item #: 104110, Ref: R3215) $59.00

Side Emblem - For tractor models TO35, MF35. Side Emblem. "Ferguson-35". Metal. Sold individually. Chrome, red background. 1-1/4 inch x 9-7/8 inch. Includes mounting clips. Attaches with 3 pegs. Replaces OEM number 183193M1. (Item #: 104113, Ref: R3213) $34.00

Drive Train

Ferguson TO35 6 Speed Transmission Parts

6 Speed Transmission Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.

NOTE

Ferguson TO35 6 Speed Transmission Selector and Related Parts

6 Speed Transmission Selector and Related Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. *Do not put this part in basket. You must call for application, identification and availability.

NOTE

Axle Collar - For tractor models MF135, MF150, MF35, MF50, TO35. (Item #: 108413, Ref: 180596M1) $10.00

Axle Housing Shim .004 - This Axle Housing Shim measures .004 inches thick, inside diameter of 4 1/2 inches and outside diameter of 7 1/2 inches. For 12 bolt housings on models: FE135, FE35, F40, TO35, 135, 150, 230, 231, 235, 240, 240P. Instrials: 20, 20C, 20D, 202, 204, 2135, 2200, 30, 3165. (Item #: 172917, Ref: 183259M1) $4.10

Axle Housing Shim .016 - .016 inch thick shim. 12 bolt. For tractor models FE135, FE35, F40, TO35, 135, 150, 230, 231, 235, 240, 240P. Instrials: 20, 20C, 20D, 202, 204, 2135, 2200, 30, 3165. (Item #: 173664, Ref: 183260M1) $3.90

Axle Shim - This is a Steel Rear Axle Shim. It is .020 inches thick. It is used on Ferguson TEA20, TE20, TEF20, TO20, TO30, TO35, F40, Massey Harris 50, Massey Ferguson 35, 35 UK, 50, 135, 135 UK, 150, 230, 231, 235, 240, 245, 3165, 20, 202, 204, 2135, 20C, 20D, 30. It replaces original part number 183261M1. (Item #: 178176, Ref: 183261M1) $3.80

Ball Bearing - Bearing, ball, for countershaft front. Also used for multi-power mainshaft front. Replaces 831469M1. For MF135, MF150, MF165, MF175, MF180, MF35, MF65, TO35 (Item #: 169628, Ref: 195507M1) $27.80

Bearing Cone - Cone (53177) for differential. For tractors: TO35 serial number 169467 and up MF50 using sleeve 181251M92 MF35, MF135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275. 1.75 inch bore. 1.114 inch bearing width. (Item #: 182661, Ref: 195163M1) $127.00

Bearing Cone - Cone (HM903249), for differential. For tractors: TO35 serial number 169467 and up, using sleeve 181251M93 MF35, MF65 serial number CL2686122 and up, MF165, MF180 using sleeve 190606M92 MF175, MF235, MF255, MF265, MF275. 1.750 inch bore, 1.125 inch bearing width. (Item #: 117943, Ref: 831888M1) $27.10

Bearing Cone - Rear Axle Outer Bearing Cone. For tractor models MF135, MF150, MF35, MF50, TO35. (Item #: 128533, Ref: 195675M1) $37.60

Bearing Cup - Double tapered cup (53376D) for differential. For tractors: TE20, TO20, TO30, TO35 prior to serial number 169467 MF35, MF50 using sleeve number 181251M91 also MF65 to serial number CL2686121 MF135, MF150, MF165, MF175, MF180. (Item #: 180440, Ref: 181251DTC) $329.00

Bearing Cup, Axle Hub - Bearing Cup - Axle Hub. For tractor models MF135, MF150, MF35, MF50, TO35. Replaces 195676M1, 300975M1, 300975M91, JD7439, A453X, 300975V1 (Item #: 108414, Ref: 300975M1) $14.80

Bearing Cup, Differential - For tractor models FE35, TE20, TO20, TO30, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 302, 31, 3165, 356, 360, 362, 3630, 3650, 375, 383, 390, 390T, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 670, TO35 serial number <-169467. Replaces 1850090M91. (Item #: 117943, Ref: 185778M1) $27.10

Bearing Cup, Rear Axle, LH Inner - This Left Hand Bearing Cup measures 4.438 inch outside diameter and .938 inch width. Fits models 135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275, MF35, MF50, MF65, TO20, TO30, TO35. (Item #: 116984, Ref: 195160M1) $18.30

Bearing, Input Drive Shaft - Bearing, ball, input drive shaft. Inside diameter 1.574 inches, outside diameter 3.150 inches, width .709 inches. For tractor models TO35, MF35, 50, 65, 135, 150, 165, 175, 180. (Item #: 172367, Ref: 195505M1) $27.30

Bearing Kit - Needle Bearing Kit. For transmission reverse idler gear. Not for shuttle, instant reverse, or 12-speed transmissions. (1) required. For tractors: TO35 serial number 171549 and up, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240. (Item #: 125327, Ref: 830735M91) $34.00

Bearing, Needle - Needle Bearing, for power input pilot, multi-power. For MF135, MF150, MF165, MF175, MF180, MF35, MF65, TO35. 1 inch inside diameter, 1-5/16 inch outside diameter, 3/4 inch wide. (Item #: 116985, Ref: 195873M1) $19.50

Bearing Seal and Collar Kit, Rear Axle - Contains (1) shrink-on collar 180596M1 (3 inch x 2-1/4 inch x 11/16 inch), (1) axle bearing (cup 300975M1 and cone 195675M1), (1) inner axle seal 195678M2 (2-1/8 inch x 2-7/8 inch x 1/2 inch), (1) outer axle seal 195677M1 (2-3/4 inch x 3-5/8 inch x 19/32 inch). Fits where the above parts are used: TO35, F40, 133, 135, 135UK, 140, 148, 150, 20, 20C, 20D, 2135, 230, 231, 235, 240, 245, 30, 3 165, 340, 35, 35UK, 35X, 50, 550. Verify part numbers. Some of these models were build with more than one rear axle. (Item #: 182552, Ref: S.05948) $98.00

Countershaft - Countershaft, 6 speed and manual shuttle. 17/20 spline, 15 tooth. For the following tractors: 1080, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 220, 2200, 230, 235, 245, 30, 35, 50, F40, FE135, TO35. (Item #: 178325, Ref: 183054M92) $214.00

Countershaft - Countershaft, 6 speed transmission. 20/17/10 spline, 15 tooth, 12.750 inches long. For the following tractors: 135, 202, 203, 204, 205, 2135, 2200, 3165 35, 50, 65, FE135, MH50, TO35. (Item #: 173663, Ref: 183085M1) $194.41

Countershaft Driven Gear - Countershaft Driven Gear, 6 speed trans. 50 tooth, 20 spline. For tractor models 135, 150, 20, 202, 2135, 2200, 230, 235, 245, 35, 50, F40, FE135, MH50, TO35. (Item #: 165905, Ref: 181799M1) $77.15

Coupler - Coupler, 3-13/16 inches long, 10 spline, 1 groove, rear drive shaft to pinion. For tractors: MF230 serial number 9A349239 and up, MH240 to serial number 2773N01001, MF240 standard, MF68, MF50, MH50, TO35 serial number 169467 and up. Industrial: 20D. We suggest measuring the pinion spline length and length of coupler to determine if 1683757M91 (4-5/16 inches long) was previously installed and whether 1871192M1 coupler is needed. (Item #: 113799, Ref: 1871924M1) $34.00

Cross - Part 11 in picure. For tractor models TO35, FE35, F40. Replaces 894302M1. (Item #: 113612, Ref: 181276M1) $14.00

Detent Plunger - This Detent Plunger is used on; 6 speed standard transmission selectors, 6 speed multi power selectors, 8 speed multi power selectors, 8 speed synchromesh selectors and as a rear axle housing PTO selector. Fits multiple Massey Ferguson tractors. Replaces original part numbers 180418M1 and 180418M2. (Item #: 169495, Ref: 180418M2) $4.60

Detent Plunger Spring - This Detent Plunger Spring is used with 180418M2 Detent Plunger. It is used on 6 speed standard transmission selectors, 6 speed multi power selectors, 8 speed multi power selectors, 8 speed synchromesh selectors and as a rear axle housing PTO selector. Fits multiple Massey Ferguson tractors. Replaces 180417M1, 191221M1, 191221M2 (Item #: 165970, Ref: 180417M1) $1.90

Differential Bearing and Cup - Fits in Differential Lock. Bearing and cup is used on multiple Massey Ferguson Tractors. Replaces original part numbers: 1850087M91, 1850087M92, 1851533M91, 1851533V91, 185773M1, 185775M1, 185776M1, 1857775M1, 1857776M1, 195159M1, 195159V1, 195160M1, 195160V1, 300975M1. (Item #: 179801, Ref: 195159M1) $29.60

Differential Ring and Pinion Set - 9-7/8 inch Pinion Gear length. Differential, ring gear and pinion set. 37 and 6 tooth. For tractor models 30, FE35, TO35, 35, 35UK, 50, 135, 135UK, 230, 231, 235, 240, 245, 20, 20C, 20D, 2135, (3165 light duty) check pinion length. Replaces 1683757M91, 182115M91, 1885317M91, 1885317M92. (Item #: 116129, Ref: 531862M91) $306.00

Differential Ring and Pinion Set - 10 inch Pinion Gear length. For tractor models TO35, 130, 135, 150, 230, 235, 35, 40, 50. Replaces 1885317M92 and 1889777M92. Long pinion ( 9.93 inch /252mm), 37 tooth ring gear, 6 tooth 10 spline pinion shaft. (Item #: 187024, Ref: 1683757M91) $331.00

Drive Shaft, Reverse Gear - 6.580 inches in length, 1.00 inch in diameter. For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 290, 298, 30, 31, 35, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 170391, Ref: 180445M1) $22.30

Gasket, Rear Axle Trumpet Housing - Size is approximately 15-1/4 inches. Fits TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 180, 20, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 245, 2500, 30, 31, 3165, 35, 40, 50, 50, 65. (Item #: 151916, Ref: 183254M1) $4.40

Gear, 2nd - This gear is 2nd speed for 8 speed transmission. Gear has 23 teeth. For tractor models FE135, FE35, F40, MH50, TO35, 1080, 1085, 11, 165, 148, 150, 155, 158, 165, 168, 175, 178, 185, 188, 20, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 550, 565, 575, 590, 65, 765. (Item #: 173295, Ref: 180419M1) $25.90

Gear, 3rd - This gear is 3rd speed for, 8 speed transmission. Gear has 33 teeth, 17 spline and is 5.075 inches in diameter. For tractor models FE35, MH50, TO35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 65, 765, FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 151824, Ref: 180415M1) $27.10

Gear Lever Tension Spring - This Gear Lever Tension Spring is widely used on many Massey Ferguson Tractors. Confirm part number before ordering. Replaces 192007M1, 964894M1, 180582M1 (Item #: 126830, Ref: 180582M1) $2.50

Gear, Reverse - For tractor models FE35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 365, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 65, 765, FE135 COVENTRY, TO35 serial number 17159>, 2135 TURF UTILITY NARROW. This gear is for a 8 speed transmission with 13 and 21 teeth. (Item #: 151823, Ref: 183040M1) $75.00

Gear Shift Boot - For tractor models TE20, TO20, TO30, TO35, 20, 35, 50, 65, 85, 88, Super 90, 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 285. Top Hole 1/2 inch. Bottom hole 1 1/2 inch. Replaces 180579M4, 180579M3, 108579M3, 520858M1, 237461 (Item #: 114031, Ref: 520858M1) $2.90

No
Picture
Gear Shift Knob - Round ball, 3/8 inch NF thread. For tractor models TO20, TE20, TEA20, TEF20, TO30, TO35, FE35, F40, 130, 135, 150, 165, 175, 20, 202, 203, 204, 205, 2135, 220, 2200, 2500, 30, 302, 303, 304, 30E, 3165, 320, 333, 35, 356, 40, 404, 406, 44, 444, 50, 50A, 50E, 555, 65, 85, 88, 90, Super 90, 95, 98, F40, FE135, MH50, TO35. (Item #: 150683, Ref: 180006M91) $3.90

Gear Shift Spring Retainer - This Gear Shift Spring Retainer is used on many Massey Ferguson Models. Replaces OEM numbers 180583M1, 1861024M1 (Item #: 126687, Ref: 1861024M1) $13.30

Input Housing Shaft Seal - 1-1/8 inch inside diameter x 2-1/4 inch outside diameter. For tractor models (TO35, FE35 with single clutch), 135, 135 UK, 2135, 240, 3165, 65, MF35, MF50. (Item #: 178027, Ref: 195523M1) $4.80

Input Shaft Housing Gasket - For tractor models F40, FE35, TO35, 135, 135 UK, 2135, 240, 3165, 65, MF35, MF50, MH50. (Item #: 166860, Ref: 180434M1) $1.40

Layshaft Housing Gasket - This Layshaft Housing Gasket, also known as Bearing Housing Cap Gasket, is used on some 6 speed, Multi-power and 12 speed Syncromesh transmissions. It replaces OEM part numbers 1004633M1, 181237M1 (Item #: 169496, Ref: 181237M1) $1.50

Lock Nut, Pinion - Used on Massey Ferguson 133, 135, 140, 148, 165, 175, 178, 180, 20, 20C, 2135, 2200, 230, 235, 245, 2500, 255, 265, 275, 30, 31, 3165, 35, 35UK, 40, 4500, 50, 50A, 65, 6500. (Item #: 179636, Ref: 180456M1) $26.40

Main Drive Pinion Shaft Seal - Measures 1.125 inch x 1.562 inch x .250 inch. For tractor models 20, 20C, 202, 203, 2135, 30, 31, 3165, TO35, 135, 150, 165, 175, 230, 235, 245, 35, 50, 65. Replaces: 195501M1, 195870M1. (Item #: 165141, Ref: 195501M1) $4.70

MAIN Shaft Bearing - Bearing, ball, for MAIN shaft (1 37/64 inch). For all single and dual clutch, 6-speed and multi-power models. Tractors: TO35, MF35, MH50, MF65, MF135, MF150, MF165. (Item #: 169639, Ref: 195502M2) $9.30

Main Shaft Gear - Transmission Mainshaft Gear. Intermediate and high for regular transmission with serial number to 213313. 36/46 tooth, 18 spline. For the following tractors: 35, 50, 65, FE35, TO35. (Item #: 179610, Ref: 180416M1) $158.00

Oil Trough Assembly, LH - For tractor models F40, FE135, FE35, 50, TO35, 150, 20, 202, 204, 20C, 20D, 2035, 2200, 230, 231, 235, 240, 240P, 245, 30, 3165, 35, 50. Replaces 4246537M1, 825774M2, 825774M2 (Item #: 173161, Ref: 825774M2) $44.10

Planetary Cover Plate, Front - For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. Replaces 180408M2, 180408M1. (Item #: 173500, Ref: 180408M2) $17.30

Planetary Cover Plate, Rear - For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Item #: 180666, Ref: 184012M4) $20.40

Planetary Selector Gearshift - For tractor models: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Item #: 173169, Ref: 180446M1) $17.90

Planetary Thrust Washer - This Planetary Thrust Washer is for tractor models 135, 150, 165, 202, 203, 204, 205, 2135, 302, 304, 3165, 35, 356, 50, 65, 85, 88, Super 90, F40, FE35, TO35. (Item #: 172988, Ref: 180414M1) $16.10

Power Input Shaft - Power Input Shaft with 6 speed transmission has 18 tooth, 10 spline, length of 14 inches. For tractor models 135, 150, 20, 202, 204, 20C, 2135, 2200, 230, 235, 245, 285, 35, 50, F40, FE135, FE35, TO35. Replaces 1669325M1, 180420M1. (Item #: 166908, Ref: 1669325M1) $125.00

No
Picture
PTO Lift Pivot Shaft - For Massey Ferguson tractor models F40, TO35, 35, 35 (France), 35X (France), 50, 50 (Harris and Massey), 65, 135, 135 (UK), 150, 165, 165 (UK), 175, 175 (UK), 178 (UK), 180, 230, 231, 231S, 235, 240, 240 (S, Turkey), 245, 250, 255, 265, 265S (Turkey), 270, 271X, 271XE, 275, 275 (UK), 281, 281X, 281XE, 282, 283, 283 (UK), 283 (Brazil), 285, 285S (Turkey), 290, 290 (UK), 298, 360, 375, 383, 390, 390T, 393, 396, 398, 399, 431, 451, 461, 471, 481, 492, 543, 583, 596, 670, 690, 698, 699, 1080, 1085, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 8250, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 898304M91, (Item #: 176229) $7.30

Rear Axle Housing Gasket, Outer - For tractor models TO20, TO30, TO35. Replaces 181232M1. Used for seal between bearing retainer and axle housing or backing plate. Thickness 0.016 inches. (Item #: 153608, Ref: 9N4130) $1.00

Rear Axle Oil Seal, Outer - This rear axle oil seal is for tractors with brake drums. Measures 2 3/4 inches inside diameter, 3 5/8 inches outside diameter and 19/32 inches wide. For tractor models TO35, 135, 230, 235, 240, 35, 50. (Item #: 108416, Ref: 195677M1) $6.20

Ferguson TO35 Rear Differential and Related Components

Rear Differential and Related Components - Please use diagram to match parts to tractor models. Parts must be ordered by phone. (SPA)

NOTE

Ferguson TO35 Rear Differential and Related Parts

Rear Differential and Related Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.

NOTE

Rear Drive Coupling - Drive coupling, differential, rear. For tractors: TO35, MF50, MF65 industrials: 202, 204 Work Bull, 203, 205, 356 Tractor shovel, 2200 Treever, 2135 utility. 5 inches long, 10 splines 1-1/4 inch and 2 inches long. Replaces 183088M1, 880069M1, 880069M2 (Item #: 160182, Ref: 183088M1) $38.30

Seal, Rear Axle Oil, Inner - This oil seal fits: [Industrial; as an inner rear axle shaft oil seal with dry brakes: 2135, 2200, 3165, MF20, MF20C, MF30 (2 used per tractor, sold individually)], as a transmission input shaft front cover oil seal: 85, 88, Super 90, [as an inner rear axle shaft oil seal with dry brakes: 135, 150, 202, 203, 204, 205, 230, 231, 235, 240, 245, 35, 50, F40, FE35, TO35 (2 used per tractor, sold individually)]; Replaces: 195678M1, 195678M2. 2.125 inches inside diameter, 2.879 inches outside diameter, 0.438 inches wide. (Item #: 108415, Ref: 195678M2) $6.10

Shift Fork, 1st, Reverse, 2nd and 3rd - For tractor models FE35, F40, MH50, TO35, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 202, 203, 204, 205, 2135, 2200, 230, 235, 245, 255, 265, 270, 275, 285, 290, 298, 30, 31, 3165, 35, 50, 65. (Item #: 151023, Ref: 180437M1) $38.00

Shift Lever Locking Pin - This Shift Lever Locking Pin is used on Ferguson, Massey Harris and Massey Ferguson applications. It replaces OEM part numbers 180581M2, 1678440M1, 180581M1 (Item #: 183009, Ref: 1678440M1) $1.10

Shift Rail, 1st and Reverse - Replaces: 180442M2. For the following tractors:1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 220, 2200, 230, 231, 235240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 35, 40, 50, 65, F40, FE135, MH50, TO35 (Item #: 172890, Ref: 1678867M1) $47.00

Side Cover Gasket - This Side Cover Gasket fits the multiple Ferguson and Massey Ferguson tractor models as a side cover gasket and a PTO shift cover gasket. It replaces original part numbers 181217M3, 181217M1, 181217M2, 181217M4, 181217M5, 181217M6, 3816331M92, 181217V3, 3816331T92. (Item #: 112236, Ref: 9N4131) $1.00

Snap Ring - Internal - For Massey Ferguson tractor models TO35, 20, 30, 31, 35, 50, 135, 150, 165, 175, 178, 230, 235, 240, 245, 2135, 3165, Compatible with Massey Ferguson Construction and industrial models 20C, 30, 31, 40, 50, 50B, 65, Replaces Massey Ferguson OEM number 195222M1, (Item #: 169491) $3.30

Transmission Mainshaft - For Regular Transmission with serial number to 213313. Shaft is 11.375 inches long, 18 spline. For the following tractors: 35, 50, 65, FE35, TO35. (Item #: 173091, Ref: 180441M1) $149.00

Transmission Rear Axle Gasket - This gasket is used on multiple Massey Ferguson tractors. Dimensions measure 10.750 inches X 16 inches. It replaces original part numbers 1861986M1, 1861986M2, 3599804M1, 3599804M2, 3599804V2, 8884457M1, 181363M1, 521181M1, VPH1405 (Item #: 111906, Ref: 1861986M1) $7.80

Electrical System

Alternator with Tach Drive - This is a 12 volt 63 amp alternator. It is internally regulated and comes with fan and pulley. This alternator can be used to replace original generator. Additional brackets and hardware may be needed. Tach drive is appropriate for gas tractors where the tach drive is on the generator. Use part number ADR9209 to make this a single wire self exciting alternator (not included). (Item #: 164228, Ref: ADR0382) $140.00

Battery Cable - Cable, battery to solenoid. For tractor: TO35 battery to ground for tractors: MF35 gas, MF85D, MF88D, MF Super 90 gas. 14-1/2 inches long. For TO20, TO30. (Item #: 115760, Ref: 181572M91) $17.00

Battery Cable - Cable, starter switch to starter. Tractors: TO20, TO30. 16 inches long. (Item #: 115783, Ref: 180099M91) $10.30

Battery Cable Ground Strap - For: TE20, TO20, TO30, TO35. 7 inches long. Replaces 180165M91. (Item #: 115790, Ref: D1NN14301H) $11.80

Coil, 12 Volt - This 12 Volt Coil has an internal resistor for tractor models Super 90, Super 95, TO35, 150, 165, 180, 202, 35, 410, 50, 65, 85, 88. (Item #: 105299, Ref: 189673M1) $17.00

Coil, Ignition 6V - Coil for Delco Distributor with clip held cap. For 202, 204, 20, 26, 27L, 27, 302, 303, 304, 34, 356, 35, 402, 404, 60, 70, 72, 80, 82, 90, 92, MF35, MF50, MF65, MF85, MF88, MH50, Super 92, Super 90, TO20, TO30, TO35. Replaces 1024481M91. (Item #: 105281, Ref: D4PE12029AA) $16.30

Control Box, 12 Volt - Control box is for tractors with a generator and Standard Motor gas engines. Replaces OEM numbers: 829951M91, 1050840M91. For tractor models 20E, 240, 275UK, 283UK, 290UK and TE20, TEA20, TO20, TO30, TO35. (Item #: 172665, Ref: 1890130M91) $59.00

Distributor - A complete distributor that comes with cap, points, rotor and condenser. It has a 9 tooth shaft gear. For tractor models TO20, TE20 with Continental Engine, TO30, TO35, 35 (to serial number 245932), F40, 50 to serial number 536248. (Serviceable for: 135, 202, 204, 2135, 2200 (early with 1112643 distributor and Z134 engine). Replaces 1111722, 1111740, 1112557, 1112570, 1112586, 181544M91, 181685M91, 181686M91, 182852M91, 829856M9. (Item #: 152856, Ref: 182852M91-TP) $115.00

Distributor Cap - Distributor cap for 4 cylinder models using a Delco distributor with a clip held cap. For models TO20, TO30, TO35, 35, 202, 204, 302, 304, 50, 65, 85, 88, Super 90. Replaces 811735 Delco and 1750411M1. (Item #: 104554, Ref: 1750411M91) $9.10

Distributor Drive Gear - This Distributor Drive Gear is used on Delco distributors on F40, TO20, TO30, TO35, 35, 50. (Item #: 122695, Ref: 1025006M1) $46.00

Distributor Dust Cover - Dust Cover for Delco Distributor with Clip Held Cap. For 202, 204, 302, 304, 34, 35, 356, 92, MF35, MF50, MF65, MF85, MF88, Super 92, Super 90, TO20, TO30, TO35. Replaces 1750491M91. (Item #: 103153, Ref: 1900119) $9.70

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. fits tractor models F40, 202, 204, 40, Super 90, 85, 88, TO20, TO30, TO35, 302, 304, 35, 50, 65, 95, 97 with one of the following Delco distributors: 1112557, 1112570, 1112585, 1111722, 1111737, 1111740, 1112583, 1112589. Replaces: washer: 1750412M1, bushing: 1750499M1, shim washer: 1750406M1, 1025008M1 (Item #: 178103, Ref: ABC3007) $29.30

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Fits Massey Harris 92 Combine, Massey Harris 50. Ferguson F40, TO30, TO35, 202, 204, 302, 304, 356, 50, 65, 85, 88, 95, 97, Super 90, 35. Replaces: 1750513M1, 1750514M1, 1750520M1, 22303X, 353444XL, 354119X (Item #: 111468, Ref: 1904376) $14.80

Electronic Ignition Conversion Kit, 12 volt negative ground - Fits TO20, TO30, TO35, 50, MH50, 65 : - For TO20 with Continental Z120 engine and Delco distributor. TO30 with Continental Z129 engine and Delco 1111740 distributor, TO35 and MH50 with Continental. Z129 or Z134with Delco distibutor 1112557 or 1112570, TO35, 35 and 50 with Continental Z134 and a Delco 1112570, 1112585 or 1112385 distibutor, 65 with Continental G176 engine and a Delco 1112583 or 1112589 distributor. Also fits aftermarket ATL-55-1200. Electronic ignition conversion kit. Replaces points and condenser with an electronic module. For counter clockwise distributors with clip type cap. For use on 12 volt negative ground system only. Never change points again. Easy to install. Increases spark plug life. Increases horsepower. Improves fuel economy. Solid-state electronics. (Item #: 113775, Ref: 1143) $155.00

Electronic Ignition Conversion Kit, 6 volt positive ground - For TO20 with Continental Z120 engine and Delco distributor including Delco distributor 1112618. TO30 with Continental Z129 engine and Delco 1111740 distributor, TO35 and MH50, 50 with Continental. Z129 or Z134with Delco distibutor 1112557, 1111722 or 1112570, TO35, 35 and 50 with Continental Z134 and a Delco 1112570, 1112585 or 1112385 distibutor, 65 with Continental G176 engine and a Delco 1112583 or 1112589 distributor. Also fits aftermarket ATL-55-1200. Electronic ignition conversion kit. Replaces points and condenser with an electronic module. For counter clockwise distributors with clip type cap. For use on 6 volt positive ground system only. Never change points again. Easy to install. Increases spark plug life. Increases horsepower. Improves fuel economy. Solid-state electronics. (Item #: 113774, Ref: 1143P6) $171.00

Fuse Holder - Mounts in 5/8 inch diameter hole. 2 spade connectors. Replaces: 186216M91, 186216M91, 506063M91, 522462M91 (Item #: 112273, Ref: 376852R91) $10.40

Generator, 6 Volt, Rebuilt - Pulley not included. For tractor models TO30, TO35 1951 to 1955. This Generator has provision for a tach drive (not included). Order 1751295M91 tach drive if needed. Can be used on TO20 if adding a tachometer. Add $35.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. Replaces 181524M91, 1100043, 1100523, 1100529, 1100530 (Item #: 203518, Ref: 1100523) $365.01

Generator Pulley - This Pulley fits on generator 897104M91. For models TEA20, TEF20, FE35, TO35. 4 1/2 inch diameter. for 1/2 inch belt. Replaces 31141425, 731003M2, 131141425 (Item #: 173298, Ref: 31141425) $42.60

Glow Plug - For TO35 with 23C Standard Diesel serial number 188852 and above, and FE35 with 23C Diesel. (Item #: 128860, Ref: 829162M1) $37.70

Ignition Kit, Delco Clip-Held Cap Distributor - Ignition kit For Delco distributor with CLIP held cap. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Contains points, condenser, and rotor. Fits 202, 204, 302, 304, 34, 35, 356, 92, MF35, MF50, MF65, MF85, MF88, Super 92, Super 90, TO20, TO30, TO35, 95, 97, F40, 202, 204, MH50. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583, 1111740. (Item #: 103151, Ref: ATK1DCR) $10.30

Ignition Tune-Up Kit - For Massey Ferguson tractor models Super 90, TO20, TO30, TO35, 35, 40, 50, 65, 85, 88, 202, 204, Fits models with Continental engines with Delco distributors with clip held cap, (Item #: 168708) $28.10

Neutral Safety Switch - This Neutral Safety Switch is for bullet type terminal. Replaces 181140V94, 53208520, 181140M1, 181140M91, 181140M94, 181140M93, 181140M92. (Item #: 111507, Ref: 181140M94) $11.80

Resistor - Ballast resistor used for coil in ignition system. Resistance = .6 ohms. Note: This is NOT used on all ignition systems. (Item #: 105710, Ref: 8NE10306) $3.90

Rotor - Used with Delco distributor and clip held cap. For tractor models (35 up to serial number 245033), (50 up to serial number 536249), (65 up to serial number 702826), TO20, TO30, TO35. (Item #: 110177, Ref: 1750498M1) $3.80

Solenoid, Starter - For Massey Ferguson tractor models TO35, 35, 35 (Turf and Utility), 35 (Government (655 Series)), 50, 65, 85, 88, 205, 300 (S), 302, 304, 350 (SS), Compatible with Massey Ferguson Construction and industrial models 200, 202, Compatible with Massey Ferguson Lawn and Garden (s) 10, 12 Replaces Massey Ferguson OEM number 182696M91, 182696M1, , Compatible with Massey Harris tractor models 50, Fender or firewall mount, Fits Massey Ferguson tractor models 205-4, 400SST, 500SST, 500 Special, Super 90, Fits Massey Ferguson Lawn and Garden (s) 7, 8, 8E, 14, , (Item #: 168108) $36.50

Solenoid Switch - Solenoid Switch, all metal. For tractor: TO35 using 6-volt. For TO35. Replaces 182330M91, 182330M92. (Item #: 150222, Ref: 182330M92) $28.20

Solenoid Switch - Solenoid Switch, 12-volt. Three Post. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. For tractors: TO35, F40, MF35, MF50, MF65, MF85, MF90 Industrials: 202, 204, 302, 304, 256 utility gas and LP models. Replaces 182696M91, 182696M1. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $19.20

Spark Plug - Spark Plug 18MM Thread Diameter fits Continental Gas Engines in: TO20, TO30, TO35, 50, 65, 85, 88, S90, 135, 150, 165, 175, 180, 1100, 230, 235. Gas Industrials: MF35 Utility and turf, 202, 204, 302, 304. Massey Harris: Pony, 21, 22, 23, 30, 33, 44, 44-6, 44 Special, 101Jr. 333, 444, 555, 303, 402, 404. Replaces Autolite AL386, AL388, AL3116 and Champion D16, 516, D10, D14, D16J, D21, D89D, K13, K15J, M14, RD14, RD16, UD16 plugs. (Item #: 111742, Ref: AL386) $3.20

Spark Plug Wire Set, Custom - No cutting or fitting required for these wires. These are custom made for the following 4-cylinder Continental Gas engines using Delco Distributors: Z120, Z129, Z134, and Z145. Used on tractors: TE20, TO20, TO30, F40, 135, 135 Deluxe, 150, 35, 50, MH50, TO35. Also used on INDUSTRIALS: 202, 204. (Item #: 113765, Ref: S.42779) $18.10

Starter, 12 Volt - For use in temperate climates. For tractor models (TEF20 with 20C Diesel Engine), (FE35, TO35 with 23C Diesel Engine). Also used in some industrial 20C, 50B, 50D, 50E, 50F, 50H, 50HX Replaces 0001362060, 0001362084, 0001367011, 0001362309, 0001362072, 26278, LRS216, LRS157, 27423, 27413, 27463, 26173, 26167, 26133, 26143, 193192M91, 184907M91 (Item #: 113693, Ref: S.60360) $150.00

Starter, 12 Volt - This new 12 volt starter with drive is for tractor models TO20, TO30, 35, 50, 65, 202, 204, 302, 356, TO35. Verify number off old starter. Overall length is 12.5 inches (PLEASE VERIFY OVERALL LENGTH OF YOUR OLD STARTER. THIS MAY NOT FIT YOUR TRACTOR IF YOUR OLD STARTER IS SHORTER THAN 12.5 InchES), Diameter is 4 inches, 2 bolt center-to-center is 4.25 inches. Replaces the Delco number 1107226 and the original equipment numbers: 181541M91, 1109457, 182454M92, 1107654, 190004M91, 1107226 and TISCO starters 7877-EX, 81271-EX, 85451-EX, 4858MFGXL_12V, and 1900348M91. (Item #: 160371, Ref: 1107226) $230.00

Starter, 6 Volt ONLY, Continental GAS Engine - STARTER ASSEMBLY FOR 6 VOLT SYSTEMS ONLY with Continental Gas engine. For TO20, TO30, TO35, F40, MH50, 50, 65, Early 302, 304, 356. Has 9 tooth gear on bendix. Single bolted stud on rear side of starter (about 2 inches from the end) for electrical connection. Overall length is 12.5 inches (PLEASE VERIFY OVERALL LENGTH OF YOUR OLD STARTER. THIS MAY NOT FIT YOUR TRACTOR IF YOUR OLD STARTER IS SHORTER THAN 12.5 Inches), Diameter is 4 inches, 2 bolt center-to-center is 4.25 inches. Can replace OEM starter numbers 181541M91, 1109457, 182454M92, 1107654, 190004M91, 1107226 and TISCO starters 7877-EX, 81271-EX, 85451-EX. 1 YEAR warranty. Measurement from the outer bolt flange to the end of nose cone is 3.274 inches. (Item #: 111068, Ref: 4858MFGXL) $155.00

Starter Armature - Used on Ferguson TO20, TO30 and TO35 tractors with 1109457 Delco Starters, this armature is 12.22 inches long. Also used on the following Delco starters 1109453, 1109456, 1109457, 1109460, 1109472, 1109476, 1109477, 1109623. Replaces Delco part number 1881818 (Item #: 179588, Ref: 1750466M91) $203.00

No
Picture
Starter - Delco Style (4145), Remanufactured, Delco Remy, 1107654, 182454M92 - For Massey Ferguson tractor models TO35, 35, 65, Compatible with Massey Ferguson Construction and industrial models 50, 202, 204, Replaces Massey Ferguson OEM number 182454M92, 1900347M91, 182454M91, Replaces Delco Remy manufacturer number 1107654, Replaces manufacturer number 4145, 140-026, 91-01-4708, Delco Style, Voltage: 12, Rotation: Clockwise, Teeth: 9, (Item #: 203436) $440.01

Starter - Delco Style (4762), Remanufactured, Delco Remy, 1109457, 181541M91 - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, Replaces Massey Ferguson OEM number 181541M91, 1900347M91, Replaces Delco Remy manufacturer number 1109457, Replaces manufacturer number 140-024, 44-9904, 4762, 74762, 91-01-4448, TS-1377, X74762, Delco Style, Voltage: 6, Rotation: Clockwise, Teeth: 9, For a New version of this sku use Item #: 111068, (Item #: 203486) $346.28

Starter Drive - Drive Assembly attaches with keyway and set screws. For tractors: TO20, TO30, TO35, 50, MH50, 35, 65, F40, 202, 203. Services Delco Starters 1107755, 1107654, 1109457. NOTE: Please check the starter that is in your tractor, some starters use a pin to attach drive not a set screw. (Item #: 113968, Ref: 1035335M91) $33.90

Starter Drive - For tractor models Super 90, 1100, 1130, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 285, 50, 85, 88, TO35 GAS OR DIESEL, 750 serial number 1696157>, (850, 860 ALL WITH DELCO STARTER 1113676), (203, 205, 410, 510, 540, 550, 760 ALL WITH PERKINS ENGINES). Starter drive used with starters 1113402, 1113672, 1113391. Replaces 1755245M1. (Item #: 111105, Ref: 1755245M1) $28.30

Starter Nose Cone - VERIFY BOLT PATTERN - THIS NOSE CONE USES 2 BOLTS TO MOUNT TO THE STARTER BODY. If you have a 4 bolt, we do not have a replacement. Can fit OEM starter part number: 182454M92/1107654. For tractor models TO20, TO30, TO35, F40, MH50, 50, 65, Early 302, 304, 356. Replaces Delco number 1934316. Will NOT fit 4858MFGXL aftermarket starter. (Item #: 111739, Ref: 1751902M91) $45.10

Starter Nose Cone - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, Replaces Delco Remy manufacturer number 1912435, Replaces Delco Remy Starter number 1109457, Replaces manufacturer number 5640-1011, (Item #: 112256) $64.00

Starter, Rebuilt 12 Volt - This remanufactured 12 volt starter has 9 tooth gear on bendix. Single bolted stud on rear side of starter (about 2 inches from the end) for electrical connection. Overall length is 12.5 inches (PLEASE VERIFY OVERALL LENGTH OF YOUR OLD STARTER. THIS MAY NOT FIT YOUR TRACTOR IF YOUR OLD STARTER IS SHORTER THAN 12.5 InchES), Diameter is 4 inches, 2 bolt center-to-center is 4.25 inches. Replaces 1900347M91, 1900348M91, 4858MFGXL. A refundable $80.00 core charge will be added to your order. (Item #: 203430, Ref: TS-1126) $332.46

Starter Solenoid - Solenoid Assembly, flange mounting to starter. Replaces Delco 1114356 on starters 1108649, 1107503, 1107512, 1108649. Gas and diesel applications. 12-volt. Replaces 1025381M91, 1047083M91, 1755027M91. (Item #: 105675, Ref: 1047083M91) $17.10

Starter Switch - Switch Assembly with key, for ignition and light. Switch has 3 terminals. For GAS tractors: TE20, TEA20, TO20, TO30, TO35, MF35, MF50, MF65, 202, 203, 204, 205. (Item #: 111516, Ref: 180681M93) $15.30

Starter Switch - For tractor models Super 90, 135, 165, 50, 65), 35 Gas and Perkins Diesel, TO35 Gas and Standard Diesel. Starter Switch. 4 prong. Includes 2 keys. This is a three position switch, heat, operate, start. - LUCAS Equipment. Replaces 35630, 883920M1, 967570M4, 504809M91, 963416M1, 883928M1, 883928M91, 417402M1, 2846124 (Item #: 111515, Ref: 883928M1) $10.10

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 189158M1, 189158M91, 767828M91. (Item #: 121141, Ref: R7994) $13.40

Switch, Push Button - Fits multiple Massey Ferguson tractors. Replaces 189158M91, 189158V91, 181141M91. (Item #: 105703, Ref: 189158M91) $10.40

Tune-up Kit, Comprehensive - For Delco distributor with clip-held cap. For 4-cylinder gas engine, kit includes: AL 386 spark plugs, plug wires, points, condenser, rotor, distributor cap. Fits tractors: TO20, TO30, TO35, 35 Ag. before serial number 245033, 35 Utility before serial number 655001052, 35 Turf before serial number 65600452, 85, 88, 90 Super, MH and 50 before serial number 536249, 65 before serial number 702825, 202 Ind. Before serial number 308962, 204 Ind. Before serial number 343688, 302 Ind. Before serial number 119750053, 356 Ind. Before serial number 570001025, Swathers 34, 44. Combines 92, Super 92. (Item #: 158888, Ref: MFTUNEKIT) $53.00

Tune-up Kit, With Plugs - This Tune-up Kit is for Clip held Cap Delco Distributors, 4 cylinder gas models and includes Autolite spark plugs (Replaces Autolite AL386, AL388, AL3116 and Champion D10, D14, D16, RD16, D21, D23 plugs), points, condenser, and rotor. For models TO20, TO30, TO35, (MF35 with serial number prior to 245033), (MH50 with serial number Prior to 536249), (MF50 with serial nunber prior to 536249), (MF65 with serial number prior to 702825), MF85, MF88, MF90 Super, (35 Utility with serial number prior to 655001052), (35 Turf with serial number prior to 656000452), (202 with serial number prior to 308962), (204 with serial number prior to 343688), (302 with serial number prior to 119700082), (304 with serial number prior to 119750053), (356 with serial number prior to 570001025), Super 92. Verify correct spark plug size and type (Item #: 173738, Ref: MFITK10) $27.30

Voltage Regulator, 12 Volt - 12 Volt - 4 Terminal - Flat Mount. 4 Terminal: Light - Battery - Field - Armature (underneath base). Fits TO35, MF25, F40, MF35, MF50, MF65, MF85, MF88, MF Super 90, MF135, MF150, MF165, MF175, MF180, MF202, MF204, MF203, MF205, MF2135, MF3165. Combines SP300, SP410, SP510. 12 Volt models with generators. The Three Post side of this regulator may be parallel or slightly splayed. (Item #: 105581, Ref: 182548M92) $25.00

Voltage Regulator, 6 Volt, Positive Ground - For tractor models TO20, TO30, TO35. Voltage Regulator 6 Volt. replaces 180142M92. 4 connectors, 3 on one side, 1 on the other. This external voltage regulator has a flat base for mounting. There are 4 terminals (lights, battery, field and generator). Designed for A type circuits in positive ground systems with 2 brush generators Measures 7 to 9 output amps. (Item #: 105516, Ref: GDR6003) $29.00

No
Picture
Wiring Harness, Main - Restoration quality, 6 and 12 Volt generator systems only. Cotton braided, exactly like original. Includes headlight, wires and wiring instructions. All terminals soldered and sealed. For model TO35 gas up to serial number 161250. (Item #: 126802, Ref: TO35HARNESS) $246.00

Engine Bearings

No
Picture
Cam Bearing Set - This cam bearing set is for the Z129 and Z134 engines in TO30, TO35, 35, F40, MH50, 50, 135 SPECIAL, INDUSTRIALS 202 and 204. Standard Set. (Item #: 107235, Ref: SH-683S) $78.00

Main Bearing Set - Fits on models TEF20, TO35, FE35, with 20C or 23C Diesel Engines. Available in standard, .010, .020, .030, .040. Please specify size when ordering. (Item #: 173490, Ref: 830897M91) $66.00

No
Picture
Main Bearing Set, .010, Z134-Z145 Gas - Main bearing set .010 inch for tractors using Continental Z134 or Z145 Gas Engines: 35, 50, 135, 150, 202, 204, F40, MH50, TO35. Complete for 1 engine. (Item #: 107158, Ref: 837156M91) $88.00

No
Picture
Main Bearing Set, .020, Z134-Z145 Gas - Main bearing set .020 inch for tractors using Continental Z134 or Z145 Gas Engines: 35, 50, 135, 150, 202, 204, F40, MH50, TO35. Complete for 1 engine. (Item #: 107159, Ref: 830639M91) $112.00

No
Picture
Main Bearing Set, .030, Z134-Z145 Gas - Main bearing set .030 inch for tractors using Continental Z134 or Z145 Gas Engines: 35, 50, 135, 150, 202, 204, F40, MH50, TO35. Complete for 1 engine. (Item #: 107160, Ref: 830639-030) $141.00

No
Picture
Main Bearing Set, .040, Z134-Z145 Gas - Main bearing set .040 inch for tractors using Continental Z134 or Z145 Gas Engines: 35, 50, 135, 150, 202, 204, F40, MH50, TO35. Complete for 1 engine. (Item #: 830516M91) $86.27

No
Picture
Main Bearing Set, .060, Z134-Z145 Gas - .060 inch. For tractors using Continental Z134 or Z145 Gas Engines: 35, 50, 135, 150, 202, 204, F40, MH50, TO35. Complete for 1 engine. (Item #: MS-202P-060) $133.98

Main Bearing Set, STD, Z134-Z145 Gas - Main bearing set STANDARD for tractors using Continental Z134 or Z145 gas engines: 35, 50, 135, 150, 202, 204, F40, MH50, TO35. Complete for 1 engine. (Item #: 107157, Ref: 837155M91) $98.00

Piston Pin Bushing Set - Bushing kit, 4-760916M1 pin bushings. For 202, 204, F40, MF135, MF150, MF35, MF50, MH50, TE20, TO20, TO30, TO35 all with Continental Gas Engines. (Item #: 182637, Ref: 840708M91) $23.30

No
Picture
Rod Bearing, .002 - Connecting Rod Bearing, single .002 inch undersize, for Continental Gasoline Engines Z120, Z129, Z134, and Z145. Tractors: TE20, TO20, TO30, TO35, 35, F40, MH50, 50, 135 Special, 135 Deluxe, 150; Industrials: 202, 204. (Item #: 106983, Ref: 830508M91) $24.40

No
Picture
Rod Bearing, .020 - Connecting Rod Bearing, .020 inch undersize, for Continental Gasoline Engines Z120, Z129, Z134, and Z145. Tractors: TE20, TO20, TO30, TO35, 35, F40, MH50, 50, 135 Special, 135 Deluxe, 150; Industrials: 202, 204. Complete for one engine. (Item #: 106985, Ref: 830510M91) $15.80

No
Picture
Rod Bearing Set, .010 - Connecting Rod Bearing Kit, .010 inch undersize, for Continental Gasoline Engines Z120, Z129, Z134, and Z145. Tractors: TE20, TO20, TO30, TO35, 35, F40, MH50, 50, 135 Special, 135 Deluxe, 150; Industrials: 202, 204. Complete for one engine. (Item #: 185224, Ref: 830509M91) $91.00

Rod Bearing Set, .030 - Connecting Rod Bearing Kit, .030 inch undersize, for Continental Gasoline Engines Z120, Z129, Z134, and Z145. Tractors: TE20, TO20, TO30, TO35, 35, F40, MH50, 50, 135 Special, 135 Deluxe, 150; Industrials: 202, 204. Complete for one engine. (Item #: 183864, Ref: 830510-030) $49.00

No
Picture
Rod Bearing, Standard - Single rod bearing for Continental Gasoline Engines Z120, Z129, Z134, and Z145. Tractors: TE20, TO20, TO30, TO35, 35, F40, MH50, 50, 135 Special, 135 Deluxe, 150; Industrials: 202, 204. (Item #: 106982, Ref: 830486M91) $12.50

Wrist Pin Bushing - This Wrist Pin Bushing is used in 23C Standard Diesel Engines. 4 used per engine. Sold individually. Replaces 1884944M1, 826076M1 (Item #: 180006, Ref: 1884944M1) $5.70

Engine Gaskets

Bottom Gasket Set - Fits 23C Standard Motors Diesel Engine. For tractor models TO35, MF35, FE35, TEF20. (Item #: 173687, Ref: S.40603) $23.40

Carburetor Gasket - For Massey Ferguson tractor models F40, TE20, TO20, TO30, TO35, 35, 135, 150, Replaces Massey Ferguson OEM number 181531M2, (Item #: 161242) $1.50

Crank Seal, Front - Lip-Type. Fits Four Cylinder Continental Gas Engines. For 135, 202, 204, F40, MF135, MF150, MF35, MF50, MH50, TE20, TO20, TO30, TO35, Replaces: 1008597M1, 15287A, 843893M1, 850185M1. (Item #: 167998, Ref: 15287A) $9.30

Crank Seal, Rear - Lip-Type. Fits Four Cylinder Continental Engines. For 135, 202, 204, F40, MF135, MF150, MF165, MF35, MF50, MF65, MH50, TE20, TO20, TO30, TO35. (Item #: 106079, Ref: 1750216M92) $11.20

Crankshaft Oil Seal, Front - Fits tractor models TEA20, TED20, TEF20, TO35, FE35 with Standard 80, 85, 87mm Gas Engines, or 20C and 23C with Diesel Engines. (Item #: 173065, Ref: 825740M1) $9.90

Crankshaft Seal Kit - Kit contains front and rear crank lip-type seals and gasket for rear and felt seal for front. For Continental Gas Engines: Z120, Z129, Z134, Z145. Tractor Models: TO20, TE20, TO30, TO35, F40, MF50, MF35, MF135, MF150, 202, 204. Replaces: 1500080M1, 15287A, 15288A, 1750112M1, 1750216M1, 1750216M92, 843893M1, 850185M1. (Item #: 173222, Ref: VPC5122) $25.90

No
Picture
Crankshaft Seal, Rear - For Standard 20C and 23C DIESEL Engines in: TO35, TEF20. Rear seal. (Item #: S.42233) $15.38

Gasket Set - Valve grinding set. Used on Z134 or Z145 CID Four Cylinder Continental Gas engines For tractor models 135, 202, 204, F40, MF135, MF150, MF35, MF50, MH50, TO35. Does not include exhaust valve seals - Order separately. Contains 1750045M1 Manifold Gasket, 1750017M1 Head Gasket, 181528M1 Thermostat Body Gasket, 181526M1 Water Outlet Elbow Gasket, 2 - 11277X Cylinder Cover Stud Gaskets, 1750006M1 Vent Tube Gasket, 4 - 1750062M1 Intake Valve Seals, 1750002M1 Valve Cover Gasket. (Item #: 107248, Ref: 836287M91) $43.10

Gasket Set - Overhaul Gasket Set. For tractor models TO35, 35, MF40, MH50, 50, 135 SPECIAL, 135 Deluxe, 150, all with Z134 Continental Gas Engine, (with front seals). Does not come with sleeve seals. (Item #: 107298, Ref: 830689M91) $63.00

Head Gasket - Head Gasket, 4-cylinder Continental gas engine. For tractor models 202, 204, F40, MF135, MF150, MF35, MF50, MH50, TO35. Does not include exhaust valve seals. (Item #: 109786, Ref: 1750017M1) $35.60

Head Gasket, 23C Diesel Engine - For tractor models (TO35, FE35 with Standard motors 23C engine). (Item #: 185095, Ref: 1882771M1) $43.20

Main Bearing Cap Packing - Rear Main Bearing Cap Packing for Z120, Z129 and Z134 engine. Not included in Overhaul Gasket Set. Replaces 1021673M1 (Item #: 173240, Ref: 1006635M1) $4.70

Oil Pan Gasket - For tractor models TE20, TO20, TO30, TO35, 35, 135, 150, 202, 204, 20C, 2135, 2200, 230, 235, 245, 2500, 30B, 4500, 40, 35, 50. All Continental 4 cylinder engines. Replaces 1750024M1 (Item #: 107278, Ref: 1750024M1) $7.70

No
Picture
Oil Pump Body Cover Gasket - For Massey Ferguson tractor models F40, TO35, 35, 50, Replaces Massey Ferguson OEM number 1750087M1, (Item #: 173647) $1.92

Rocker Cover Gasket - For tractor models TE20, TO20, TO30, TO35, 135, 150, 202, 204, 20C, 2135, 2200, 230, 235, 245, 2500, 30B, 4500, F40, 35, 50. All using Continental Z120, Z129 or Z134 gas engines. (Item #: 110187, Ref: 1750002M1) $6.30

Timing Cover Gasket - For tractor models F40, TO35, 35, 50, MH50, 135, 150, 202, 204, 20C, 2135, 2200, 230, 235, 245, 2500, 30B, 4500 all with Continental Z134 Engine. (Item #: 111985, Ref: 1750032M1) $2.90

Top Gasket Set - Fits 23C Standard Motors Diesel Engine. TO35, FE35, TEF20, MF35. Replaces 1810028M91 (Item #: 184618, Ref: S.40587) $75.00

Valve Cover Vent Gasket - This valve cover vent gasket is used on Ferguson, Massey Ferguson and Massey Harris Tractors with Continental Gas Engines. It replaces part numbers 1750006M1, Z129A204. (Item #: 173372, Ref: 1750006M1) $2.60

Engine Rebuild Kits

No
Picture
Basic Engine Rebuild Kit, Less Bearings - For Massey Ferguson tractor models F40, TO35, 35, 50, 135, 202, 204, Kit Contains: sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals, For Basic Engine Rebuild Kit with Bearings use Item #: 184021, (Item #: 183956) $354.40

Basic Overhaul Kit, Less Bearings - Z134 - (NOT FOR Z145) Basic Engine Kit. Continental Z134 CID Gas Engine, 4 cylinder, 3 3/8 inch overbore. Contains sleeves, sleeve seals, pistons and rings, pins and retainers, gasket sets, crankshaft seals. For 135, 202, 204, F40, MF135, MF35, MF50, MH50, TO35. (Item #: 130844, Ref: BEKM119-LCB) $372.00

Major Overhaul Kit with CRANKSHAFT - Overhaul Kit for Continental Z134 Gas Engine 3 3/8 Inch OVERBORE. Including New Crankshaft Kit. Includes - pistons, wrist pin bushings, piston rings, liners, connecting rod bearings, connecting rod lock nuts (where fitted), top and bottom gasket sets, main bearings, thrust washers, front and rear seals AND A NEW CRANKSHAFT. Wrist pin bushings must be machined and pressed in. FOR MODELS TO35, MF35, MF50, MF135 Special, F40, MH50 Industrial 202, 204 B-C. (Item #: 183992, Ref: EKMC132) $1189.01

Overhaul Kit, Less Bearings - Z134 - Engine Overhaul Kit. Contains sleeves, sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals, intake valves and exhaust valves, valve keys, springs and guides. For 135, 202, 204, F40, MF135, MF35, MF50, MH50, TO35. Does not include exhaust valve seals. Order separately. (Item #: 184881, Ref: EOK119-LCB) $620.00

Valve Overhaul Kit, Z129 or Z134 Engines - For TO30, TO35, 35, F40, MH50, 50, 135 Special, all with 4 cylinder Z129 or Z134 Continental Engine. Engine Valve Overhaul Kit includes: pin type intake and key type exhaust valves, valve springs, valve keys and valve guides. Replaces: keeper half: 1004512M1, keeper pin: 18291A, valve spring: 21176A, intake valve: 830487M91, 1750070M1, exhaust valve: 830488M91, 1750072M1, valve guide: 830490M91, 1750069M1. (Item #: 107487, Ref: VOKM129) $117.00

Valve Train Kit - Includes all valves and springs. Fits tractor models TO35 or FE35 with 23C Diesel Engine. (Item #: 167923, Ref: S.41946) $182.00

Engine Parts

Camshaft - For Z120, Z129, or Z134 Continental Engines on TE20, TO20, TO30, T035, 135, 202, 204, 2135, 2200, 30, 35, 50. Replaces 1500098M1, 1750074M1, 1750293M1, 836543M91. (Item #: 110977, Ref: 836543M1) $130.00

Camshaft Gear - Camshaft gear, 48 teeth, Continental Gas Engine in models: TE20, TO20, TO30, TO35, 35, F40, MH50, 50, 135, 150; Industrials: 202, 204, 2135. Replaces: 1046676M1, 1750237M1. (Item #: 121582, Ref: 1750237M1) $90.00

No
Picture
Camshaft Gear, Used - For Massey Ferguson tractor models TE20, TO20, TO30, TO35, 35, 40, 50, 135, 150, 230, 235, 245 (all with Z120, Z129, Z134 or early Z145 4 cylinder Continental engines), Compatible with Massey Ferguson Construction and industrial models 20C, 30B, 202, 204, 2135, 2200, 2500, 4500 (all with Z120, Z129, Z134 or early Z145 4 cylinder Continental engines) Replaces Massey Ferguson OEM number 1750237M1, 1046676M1, , Compatible with Massey Harris tractor models 50, Teeth: 48, For a new version of this item use Item #: 121582, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435785) $53.01

Chain Tensioner - For tractor models FE35, TO35, with 23C engine. (Item #: 179504, Ref: 826113M1) $175.00

Connecting Rod, Used - For Massey Ferguson tractor models TE20, TO20, TO30, TO35, 35, 50, 135, 150, 2135, 2200, Replaces Massey Ferguson OEM nos 830644M91, 1046982M91, Replaces Massey Ferguson Casting nos Z120D500, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430302) $82.01

Crankshaft - New Crankshaft only (bearings not included) for Continental Z129 and Z134 Gas Engines. For TO30, TO35, 35, 50, MH50, 135, 202, 204 . See our engine bearings category for prices and sizes. Also replaces 1750169M1. (Item #: 102110, Ref: 830686M91) $430.00

Crankshaft Gear - Crankshaft Gear, 24 teeth. For tractor models TO35, 35, MH50, 50, 135, 150. Continental Gas Engine. (Item #: 121584, Ref: 1750054M1) $55.00

Crankshaft Pulley - For tractor models TO35, MF35, MH50, MF50, 65, 202, 204 with Continental Engine. 4 hole, spoked pulley with 7/16 inch holes, 2 3/4 inch center to center hole spacing. (Item #: 164737, Ref: 1750076M1) $100.00

Crankshaft Pulley, 3-Hole - For Perkins Engines. Fits Massey Ferguson Forklifts: 2500 and 4500. Massey Ferguson Industrial: 20 (Gas Engine serial number <152UA22587A, All Diesels), 20C (Diesel) 20D, 20F, 203 (Diesel), 205 (Diesel), 2135 (Utility), 2200, 30B (Diesel), 30D, 30E, 30H, 40 (Gas Engine serial number <152UA22587A, All Diesels), 40E, Tractors: TO35 (Equipped with 102 Loader), 135 (Gas Engine serial number <152UA22587A, All Diesel), 150 (Gas Engine serial number <152UA22587A, All Diesel), 230, 235 (Orchard), 245 (Orchard), 35 (Diesel), 35X (FE) (Diesel), 50 (Diesel), 65 (Engine serial nubmer <2820092). Uses 704812M93 hydraulic adapter plate. Replaces 31147784. (Item #: 118287, Ref: 734628M1) $78.00

No
Picture
Crankshaft, Remanufactured, 302306 - For Massey Ferguson tractor model TO35, Replaces Massey Ferguson Casting number 302306, Casting Number (s): 302306, (Item #: 204676) $435.01

No
Picture
Crankshaft, Remanufactured, Z134 - For Massey Ferguson tractor models TO35, 35, 50, Replaces Casting number Z134, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., For a New version of this sku use Item #: 102110, (Item #: 200460) $535.01

No
Picture
Cylinder Head, Remanufactured, 303622 - For Massey Ferguson tractor model TO35, Replaces Massey Ferguson Casting number 303622, Standard Diesel, Cylinders: 4, Casting No. 303622, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200495) $970.01

Cylinder Head, Remanufactured, Z134A601 - For Massey Ferguson tractor models TO35, 35, 40, 50, 135, 150, 202, 235, 245 (With Continental Gas Engine), Replaces Massey Ferguson Casting number Z134A601, Engine 134, Cylinders: 4, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200496) $730.01

No
Picture
Epicyclic Carrier Assembly - For Massey Ferguson tractor models TO35, 35X (FE, s/n 383154-earlier), 40, 65, Compatible with Massey Ferguson Construction and industrial models 765, Replaces Massey Ferguson OEM number 827719M91, (Item #: 170921) $292.00

Flywheel Plate - For tractor models 20C, 20, 30B, 30D, 30, 40B, 40, MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF35, MF50, MF65, TO35 (Item #: 173138, Ref: 1040886M1) $73.24

Governor Assembly - Governor Assembly for Continental Engines in tractors: TE20, TO20, TO30, TO35, MF135, MF35, F40, MH50, MF50, MF150, Pony, 202, 204, 2135, 2200, 2500. Also fits: MF135, MF150, with Perkins gas. Replaces 1002849M91, 529737M1, 529737M91, 738440M91 (Item #: 118785, Ref: 529737M1) $97.00

Governor Compensating Spring - Fits the following tractors using Continental Gas Engine: TO20, TE20, TO30, TO35, F40, MF 35, 50, 135. INDUSTRIALS: 2135. (Item #: 178100, Ref: 181535M1) $10.00

Governor Shaft Seal - For tractor models TO20, TO30, TO35, 135, 150, 230, 235, 245, 35, 50. (Item #: 173207, Ref: 1750108M1) $6.70

No
Picture
Hand Starting Crank with Spinner - Hand Starting Crank WITH Spinner. For TE20, TO20, TO30, TO35, TE20 Ferguson Tractor and MF 35 Without Bumpers. (Item #: 126699, Ref: 351010R31-S) $72.00

Heater Plug - Fits FE35 (Standard 23C Diesel), TO35 (serial number 188851 and above), Perkins A4.192 engine. Also replaces 2666805, 1854040, CAV6010/10A. (Item #: 128863, Ref: 1021910M91) $21.00

Lifter - New Lifter for TO20, TO30, TO35, MF35, MF50, MF135, MF150, MF65, MF165, 175 all with Continental Gas Engines. (Item #: 161159, Ref: 1750111M1) $18.00

Push Rod - This push rod fits the following tractor models: TE20, TO20, TO30, TO35, 35, F40, 50, 35, 150, 202, 204, 230, 235, 245, 30C, 30B, 2135, 2200, 2500, and 4500. All with the following Continental Gas or LP Engines: Z120, Z129, Z134, and Z145. 8.940 inch overall length, 0.250 inch outside diameter. Sold as a single rod and priced each. Replaces 1750058M1, Z120I-206. (Item #: 182470, Ref: MFS2420) $29.10

Ring Gear, Flywheel - This ring gear is for models TE20, TO20, TO30, TO35, 35, 50, 65, 135, 150, 165, 175, 180, all with Continental Gas Engine. Flywheel Ring Gear with 145 teeth measures 14.685 outside diameter and 13.680 inside diameter and 1/2 inch thick. (Item #: 101976, Ref: 1750034M1) $47.10

Rocker Arm Assembly - For Continental Z120, Z129, Z134, Z145 Gas Engines in models TE20, TO20, TO30, 35, F40, 50, 135, 150, 202, 204, 230, 235, 245, 30C, 30B, 2135, 2200, 2500, 4500. With forged ends. Replaces: (1) 1750073M1 rocker arm shaft, (2) 354043X1 cotter pin, (2) 1755067M1 washer, (2) 1750124M1 oil plug, (2) 1750056M1 rocker arm short spring, (4) 1750067M91 right rocker arm assembly, (4) 1750066M91 left rocker arm assembly, (3) 1750057M1 long shaft springs and (4) 1750055M1 support brackets. (Item #: 126173, Ref: MFS129) $268.00

Rocker Shaft, Plug Type - Plugs NOT included (Note: Massey had two different types of ways to plug the end of these shafts. Some had threaded plugs, but this is the type that uses plugs that are pressed in.) For tractor models TO35, F40, 35, 50, 135, 150, 230, 235, 245, 20C, 30B, 2135. With Continental Z134 or Z145 gas engine. (Item #: 185557, Ref: 1750073M1) $42.70

Shift Rail, 2nd and 4th, Used - For Massey Ferguson tractor models F40, TO35, 35, 50, 135, 150, 165, 175, 180, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 431, 451, 471, 481, 543, 583, 1080, 1085, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 30H, 31, 40, 40B, 40E, 50A, 50C, 50D, 50E, 50H, 202, 203, 204, 205, 220, 302, 304, 2135, 2200, 2500, 3165, 4500, 6500, Replaces Massey Ferguson OEM number 180438M2, 1678866M1, For a new version of this item use Item #: 172896, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460982) $19.01

No
Picture
SINGLE Valve Guide - Z134, Z129 or Z120 Gas - SINGLE Valve Guide for 135, 202, 204, F40, MF135, MF150, MF35, MF50, MH50, TE20, TO20, TO30, TO35 all with Z134, Z129 or Z120 Gas Engines. MUST ORDER 8 for complete engine. (Item #: 108035, Ref: 830490M91) $2.20

Thrust Washer Set, STD - Fits 20C and 23C Standard Motors DIESEL Engines in: TO35, TEF20. Standard size. Replaces 826034M1, 826033M1, 826239/40M1, 826239M1, 826240M1 (Item #: 184594, Ref: S.42427) $47.90

TIMING CHAIN - FOR T035, FE35 STANDARD 23C DIESEL. (62 LINKS). (Item #: 173092, Ref: 826094M1) $53.00

Valve, Exhaust - Exhaust valve, key-type. For Continental Gas Z129 and Z134 engines in models 135, 202, 204, F40, MF135, MF35, MF50, MH50, TO30, TO35. Price shown is for each. (Item #: 159420, Ref: 1750072M1) $11.30

Valve, Exhaust - Exhaust Valve for tractor models TO35 and FE35 with 23C Diesel Engine. (Item #: 1884124M1) $12.86

Valve Guide, Exhaust - For tractor models (FE35, TO35 with 23C Standard Diesel) (FE35 with 87mm Standard Gas). Replaces 826162M1. (Item #: 173111, Ref: 826162M1) $8.30

Valve Guide, Intake - This Intake Valve Guide is for tractor models TEA20, TED20, FE35 with 80, 85, 87 Gas or 35, TO30 using 23C Diesel Engines. (Item #: 164339, Ref: 825259M1) $4.90

Valve, Intake - Intake valve, pin-type for 135, 202, 204, F40, MF135, MF35, MF50, MH50, TO30, TO35. Price is for EACH. MINIMUM ORDER IS 4. (Item #: 128687, Ref: 1750070M1) $8.00

Valve, Intake - Intake Valve for tractor models TO35 and FE35 with 23C Diesel Engine. (Item #: 173203, Ref: 1884123M1) $11.20

Valve, Intake Stem Cap, Aftermarket, Pack of 4 - These intake valve stem caps come in a package of 4 and are used for the following tractor models with the Z120, Z129, or Z134 engines: TO20, TO30, 202, 204, F40, 135, 35, 50, MH50, TO30, and TO35. They measure 0.500 inches outside diameter, 0.218 inches tall, and 0.316 inches inside diameter. They are replacing: 1750060M1, 830704M91, and Z120I-208 (Item #: 178138, Ref: 830704M91) $38.90

Valve Keys - Sold each. 2 used per valve. These are only used on Roto Type Exhaust Valves on Z120, Z129, Z134, and Z145 Continental Engines. This set will be enough for two engines in this application. Replaces original part numbers 1004512M1, 841370M91. (Item #: 108430, Ref: 46209D) $0.70

Valve Lock, Pin Type - Intake and exhaust valve lock, 1 used per valve. For tractor models TE20, TO20, TO30, F40, MF135, MF35, MF50, TO35, 202, 204 all with Z134, Z129 or Z120 Gas Engines with pin type valves. (Item #: 108429, Ref: 18291A) $1.90

Valve Oil Seal - For Intake Valves on the Z120, Z129 and Z134 engines. For models TE20, TO20, TO30 and TO35. (Item #: 168510, Ref: 1750062M1) $0.70

Valve Spring - Valve spring for intake and exhaust. For Continental Gas Engines in models: 202, 204, F40, MF135, MF150, MF35, MF50, MH50, TE20, TO20, TO30, TO35. Replaces 15P461, Y400I215, Y400I00215, 21176A, 21176AV, Y400I00215 (Item #: 108428, Ref: 840754M91) $3.20

Valve Springs - Inner - For tractor models TO35 and FE35 with 23C Diesel Engine. (Item #: 185164, Ref: 1884126M1) $2.50

Valve Springs-Outer - For tractor models TO35 and FE35 with 23C Diesel Engine (Item #: 185165, Ref: 1884125M1) $7.10

Valve Stem Cap, Exhaust - Aftermarket - These exhaust valve stem caps come in a package of 4 and are used for the following tractor models with the Z120, Z129, or Z134 engines: TO20, TO30, 202, 204, F40, 135, 35, 50, MH50, TO30, and TO35. They measure 0.500 inches outside diameter, 0.235 inches tall and 0.126 inches stem diameter. They are replacing: 1750071M1, 830705M91, and Z129I-206. (Item #: 182516, Ref: 830705M91) $33.00

Engine Pistons and Sleeves

Piston and Sleeve Kit, Continental Engine - Complete Kit for 4 cylinders. For TO30, TO35, 35, F40, MH50, 50, 135, (Z129, Z134 Continental Gas). Contains sleeves, sleeve seals, pistons and rings, pins and retainers. 3-3/8 inch overbore. (Item #: 184280, Ref: PK105) $424.00

Piston and Sleeve Kit, Standard Diesel Engine - Complete Kit for 4 cylinders. Fits TO35 and FE35 using Standard 23C Diesel 4 Cylinder Engine. Contains: pistons, rings, liners. OEM number 830972M92. (Item #: S.41943) $415.12

Piston Sleeve - Single sleeve for 3-3/8 inch overbore piston used on Continental Z129, Z134 Gas Engines. For tractor models TO30, TO35, F40. (Item #: 185625, Ref: S.60844) $42.52

No
Picture
Piston Sleeve, Standard Diesel Engine - Finished. For tractor models using Standard Motors 23C Diesel Engine: 35, TO35, FE35. (Item #: 131592, Ref: S.42627) $52.00

Piston, Std - For tractor models 35, TO35, FE35 all with 23C Standard Motors Diesel Engine. Replaces 1884101M91 (Item #: 185099, Ref: S.75974) $92.00

No
Picture
Sleeve and Piston Kit - Sleeve and Piston Kit for 1 cylinder. For Continental engine with a 3 3/8 inch bore. Includes: piston, liner and rings. For tractor models 135, 202, 204, 35, 50, F40, TO30, TO35. All with Continental Z129, Z134 Gas Engine. (Item #: 108105, Ref: SK105) $104.00

Sleeve Seals, Pack of 2 - Pack of 2. O-ring for Piston Liner Sleeve. (NOTE: Sleeves usually use a minimum of 2 O-rings each). Use on Ferguson, Massey Harris and Massey Ferguson tractors with Z120, Z129, Z134, Z145, and G176 engines. Replaces 1750000M1 (Item #: 128575, Ref: 1750000M1) $9.20

Engine Rings

Piston Ring Set - Ring Set for a single piston. For Continental Z134 Engine. 3-5/16 inch standard bore, replacing original rings. Includes 3 compression at 1/8 inch and oil at 3/16 inch per cylinder. For tractor models 202, 204, F40, MF135, MF35, MF50, MH50, TO35. (Item #: 129085, Ref: 836097M91) $44.90

Piston Ring Set - Ring set for 4 pistons. For 3-3/8 inch overbore pistons. (3 compression 3/32, 1 oil 3/16). For tractor models 202, 204, F40, MF135, MF35, MF50, MH50, TO30, TO35. (Item #: 183921, Ref: PRS105) $109.00

No
Picture
Piston Ring Set - For MF 134 Continental Engine. Set for 1 piston. Verify measurements of: 1 compression at 3/32, 2 compression at 1/8 and oil at 1/4. 4 sets used per engine. (Item #: 129024, Ref: 2C7207) $23.10

No
Picture
Piston Ring Set - Complete engine set for 3 3/8 bore, 3 compression 1/8, 1 oil at 3/16. For model TO35. (Item #: 174211, Ref: 2C7762) $97.00

No
Picture
Piston Ring Set, 23C Standard Diesel - Enough for 1 cylinder, order 4 for complete engine. For tractor models (35, TO35, FE35 with Standard Motors 23C Diesel Engine). (Item #: 186031, Ref: S.42135) $27.50

No
Picture
Piston Ring Set 3 1/4 Bore - For 4 ring piston, 3 1/4 inch bore, 2 compression at 3/32 and 2 oil at 5/32. Complete Set for 4 cylinder Gas Engine. (Item #: 129089, Ref: 2C7582) $173.00

Exhaust System

Elbow -180 deg, 2 hole - For tractor models TEF20, FE35, TO35 with 23C Diesel Engine. Does not include gasket. Gasket is available as part number 825003M1. For use with muffler part number S.02982. Two inch elbow outlet for 2 inch muffler inlet. Center-to-center on the 2 bolt mounting flange is 2 3/4 inches. (Item #: 123088, Ref: 824245M1) $32.70

Elbow Gasket - Fits tractor models TEF20, FE35, TO35 with 23C Diesel Engine. This gasket is for elbow 824245M1. (Item #: 180546, Ref: 825003M1) $2.10

Exhaust Elbow - This Exhaust Elbow fits the following tractors using Continental Z120, Z129, or Z134 GAS Engines: TE20, TO20, TO30, TO35. Outlet Outside Diameter 1-7/8 inch. Replaces original part numbers 181866M2, 181886M2. (Item #: 155913, Ref: 181886M2) $32.10

Exhaust Pipe Horizontal - For 35, 135, 202, 204, 2135 and TO35 with horizontal exhaust on 135 w/ Perkins AD3.152. L-shaped configuration, 3 bolt inlet flange, 18 inch vertical length, 20 inch horizontal length, 1.5 inch outlet diameter. Also replaces 181600M91. (Item #: 115544, Ref: 181600M92) $40.90

Exhaust Pipe, Horizontal - For tractor models TEF20, TO35, FE35 all with either of the built in England Standard Motors Company 20C or 23C Diesel Engines. (Item #: 182801, Ref: 826990M91) $138.00

Intake and Exhaust Manifold - For Massey Ferguson tractor models TE20, TO20, TO30, TO35, 35, 135, 150, 205, 2135 (gas), Compatible with Massey Ferguson Construction and industrial models 202, 203, 204, Replaces Massey Ferguson OEM number 1040903M91, (Item #: 101617) $170.00

Manifold - Intake and Exhaust Manifold. For TE20, TO20, TO30, TO35, 35, 135 all with 4 Cylinder Continental Gas Engines. Will also work on the 50 with slight modification to exhaust pipe. Includes adapter, and gaskets (R0059G). Replaces 1040903M91, 1039258M1, 105342M91, 1046679M1. Comes with Gasket set. Does not come with hardware, i.e. bolts, nuts, etc. Optional clamp kit used on TO20 and TO30 with flared pipe end available as part number FP185. There is a threaded vacuum port on this tractor which requires an 1/8 inch (N.P.T.) pipe plug, available at well stocked hardware stores. (Item #: 183962, Ref: 1750343M91) $230.00

Manifold Gasket Set - For TE20, TO20, TO30, TO35, 35, 135 all with Continental Gas Engine. (Item #: 101618, Ref: R0059G) $10.60

Muffler - Horizontal Muffler (round). For MF135, MF35, TO20, TO30, TO35. Inlet inside diameter 1.5 inches. Outlet outside diameter 1.5 inches. Length 34 inches. Shell diameter 3.25 inches, inlet length 2.75 inches, outlet length 11 inches. (Item #: 102443, Ref: 505545M92) $35.20

Muffler - Vertical Assembly with 3-bolt flange. For tractor: TO35 2-piece. Shell length 10 1/2 inches, outlet length 4 inches, outlet diameter 1 1/2 inches, overall length 47 inches. (Item #: 102431, Ref: M115) $101.65

Muffler - 2 1/2 inch inlet length, 1 1/2 inch inlet inside diameter, 23 inch shell length, 8 1/2 inch outlet length, 1 1/2 inch outlet outside diameter, 34 inch overall length. NOTE: Horizontal/Round Body has 3 1/4 inch shell diameter. For tractor models 135, 35, TE20, TO20, T030, TO35. All with gas or diesel engine. (Item #: 102440, Ref: 180364M91) $44.60

Muffler - For Perkins Diesel. One piece. For the following tractors: 135 with Gas engine, 35 with Perkins Diesel, TO35 with Perkins Diesel. (Item #: 102455, Ref: MF3410) $108.00

No
Picture
Muffler - For Massey Ferguson tractor model TO35, Muffler mount: Vertical, Shell Diameter: 3-1/4", Shell Length: 10-1/4", Inlet I.D.: Plate, Outlet O.D.: 1-1/2", Color: Silver, 1 pc assembly. Muffler has 3 bolt plate, Exhaust rain cap use Item #: 108631, Additional Handling and Oversize Fees Apply To This Item, (Item #: 102430) $78.98

Muffler - For tractor models TE20, TEA20, TEF20, TO35, FE35. All using Standard GAS Engines: 80mm, 85mm, 87mm. Also for Standard DIESEL Engines: 20C and 23C. 1 5/8 inch inlet diameter. (Item #: 169634, Ref: 825698M91) $40.50

Muffler and Pipe Assembly - Horizontal Muffler and pipe assembly with 3-bolt flange. For tractors: TO35, MF35 Continental gas. Measures 4.25 inch shell diameter, 14.5 inch shell length, 1.50 inch outlet and inlet diameter, 59 inches overall length. (Item #: 102429, Ref: M119) $48.00

Muffler and Pipe Assembly - Custom designed upright muffler and pipe with 3-bolt flange measures 41 1/2 inches overall length with a 1 1/2 inch outlet outside diameter. Shell diameter = 3 1/4. For tractors: MF35 with Perkins diesel. MF135 with Continental gas. (Item #: 102455, Ref: M134) $108.00

Muffler, Vertical - For TEF20, FE35, TO35, all with 23C Standard Diesel Engine. 2 inch inlet used with elbow number 824245M1. Replaces 894291M1, 894291M2, 894291M4, 894291M91, 894291M92, 894297M1. (Item #: 160970, Ref: 894291M4) $35.00

Muffler, Vertical - For tractor models TEF20, TO35, FE35 all with either Standard Motors 20C or 23C Diesel Engine. (Item #: 160970, Ref: 894291M4) $35.00

Muffler, Vertical, Black Enamel - Comes with pipe, 2 clamps, bolts and rain cap, 1-7/8 inch inlet. For tractor models TO35 with Continental Engine. (TO20, TE20, TO30 if manifold S.60036, 181866M2 and gasket 3640488M1 are used). Also adaptable to other Massey Ferguson tractors with Continental engines and 1-7/8 inch pipe. Replaces 181867M91. (Item #: 184783, Ref: S.43643) $87.00

Muffler, Vertical, Silver Finish - Comes with pipe, 2 clamps, bolts and rain cap, 1-7/8 inch inlet. For tractor models TO35 with Continental Engine. (TO20, TE20, TO30 if manifold S.60036, 181866M2 and gasket 3640488M1 are used). Also adaptable to other Massey Ferguson tractors with Continental engines and 1-7/8 inch pipe. Replaces 181867M91. (Item #: 187422) $76.00

Vertical Muffler Pipe to Manifold Gasket - Exhaust Elbow Gasket. For tractor models TE20, TO20, TO30, TO35, 135, 150, 35, 50, 65, 230, 235, 245, 20, 202, 203, 204, 205, 20C, 2135, 30B, 30D. Also Replaces OEM number 827877M1, 180104M1, 4222475M1, 72080353. Priced each. (Item #: 101628, Ref: 3640488M1) $2.00

Weather Cap - For tractor models TEF20, FE35, TO35 with 23C Diesel. Cap fits a 2 inch pipe. Replaces 192791M91 (Item #: 108633, Ref: R1800) $8.80

Fuel System / Air Intake

Air Cleaner - Height is approximately 14" For TO35 (SN# 204181>), FE35, 35 Turf and Utility, Industrial 202 Workbull with Continental Engine. (Item #: 167825, Ref: 187118M91) $94.00

Air Cleaner Hose - For tractor models TO30, TO35, (TEA20 with 85mm engine serial number 200001 and up), 35 Gas. Measures 1 9/16 inches inside diameter small end, 3 inches inside diameter large end, overall length of 6 1/2 inches. (Item #: 167809, Ref: 180362M1) $19.72

Air Cleaner Hose - For tractor models TO35, 35, 35X (FE). Also replaces 826963M1. End diameters are are 2.07 inches and 1.80 inches, overall length is 5 7/8 inches. (Item #: 155910, Ref: 1884897M1) $8.60

Air Cleaner Oil Cup - This cup is for Clamp Type Air Cleaners. This cup measures 4 3/4 inches outside diameter at the lip. The height is 3 inches. Please measure before ordering to ensure the proper fit. For models TO20, TO30, TO35, 202, 204, 35. Replaces part numbers 15791A, 15793A, 1751275M1, 180201M1. (Item #: 111005, Ref: 311507) $15.80

Air Inlet Hose - This Dash to Air Cleaner hose measures 1-3/4 inches inside diameter, (small end), 2-5/8 inch x 3-1/4 inch inside diameter (large end), 6-1/2 inches long from large end to bend, 1 inch from bend to small end. Used on TO35 and FE35 diesel tractors. Note this is not correct for Perkins or Continental engines. (Item #: 172994, Ref: 827080M1) $22.90

Carburetor - Features reversible linkage. This Zenith carburetor outperforms the original carbs used on: TO35, 35, MF40, 50, 202, A145 Replaces Marvel-Schebler TSX605, TSX683, TSX882, TSXU834. Center to center on 2 mounting bolts is 2 5/16 inches. Made in USA, 1 year warranty. (Item #: 100748, Ref: 12566) $430.00

Carburetor - For TO35 (Deluxe and Standard), 35, 40, MH50, 135, 150, 202, 204, 50, 2135. Replaces Marvel-Schebler TSX605, TSX683, TSX882. 2 3-8 inches center to center on mounting bolts. Note: Not for use with choke cable only choke rods. [Part No: 12566 will accept cable, slightly different spacing] (Item #: 113777, Ref: 181532M92) $123.00

Carburetor - For TO35 (Deluxe and Standard), 35, 40, MH50, 135, 150, 202, 204, 50, 2135. Replaces Marvel-Schebler TSX605, TSX683, TSX882. 2 3-8 inches center to center on mounting bolts. Cast Iron, like the original. (Item #: 185746, Ref: 533969M91) $280.00

Carburetor - Features reversible linkage. This Zenith style carburetor outperforms the original carbs used on: TO35, 35, MF40, 50, 202, A145 Replaces Marvel-Schebler TSX605, TSX683, TSX882, TSXU834. Center to center on 2 mounting bolts is 2 5/16 inches. Imported. 1 year warranty. (Item #: 184603, Ref: 12566B) $300.00

Carburetor Elbow and Strainer - Elbow and strainer fits models 135, 150, 35, 50, F40, TE20, TO20, TO30, TO35, 202, 204, and 2135 models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. Replaces OEM numbers 1751172M91 and 1751212M91. (Item #: 110005, Ref: 9N9553) $5.50

Carburetor Float - Float for Marvel-Schebler Small Bowl Carburetors in tractors: TO20, TO30, TO35, MF35, F40, MH50, MF135, MF150. For F40, MF135, MF150, MF35, TO20, TO30, TO35. Replaces 15480A. (Item #: 108449, Ref: 9N9550A) $9.90

Carburetor Float - Fits Carter number UT27015, UT2223S, UT2418S, UT923S with Cast Iron Throttle Body, Carter number 21-121S. For tractor models TO35, 35, 50, 202, 204, 135, 2135, F40, MH50. (Item #: 122654, Ref: 354813R91) $36.70

Carburetor Gasket Set - 5-piece gasket kit is for small bowl Marvel Schebler carburetors. The overall length of the bowl gasket is 4 5/16 inch. TO20, TE20, TO30, TO35, F35, F50, F135, F150, F202, F204, F40, MF35, MF50, MF135, MF150, MF202, MF204, MH101JR, MH22, MH30, MH50, MH81, Colt, Mustang, Pacer, MH20, MH22K, MH82, MH102JR .TSX155, TSX188, TSX248, TSX272, TSX28, TSX308, TSX309, TSX312, TSX34, TSX361, TSX361A, TSX447, TSX458, TSX541, TSX55, TSX605, TSX606, TSX643, TSX683, TSX88, TSX882, TSX94, TSXU828, TSXU829, TSXU831, TSXU832, TSXU834 (Item #: 182465, Ref: 9N9502) $4.60

Carburetor Kit, Basic - For tractor models 202, 204, 2135, F40, MF135, MF150, MF35, MF50, TO35. For Marvel Schebler TSX605, TSX683 and TSX882. (Item #: 112448, Ref: BK49V) $24.90

Carburetor Kit, Basic - Kit includes needle and seat, float lever pin, seal, gaskets and instructions. Repairs 61, 68 and 161 series Zenith carburetors. For Zenith 13876, 10457, 12566, 12566B, 13876, 12522, 12522B, 13878, 13877, 14007, 13794, 13794B (Item #: 183586, Ref: BK44V) $27.70

Carburetor Kit, Basic - Carter carburetor rebuilt kit for tractor models TO35, 35, F40, MH50, 50, 202, 204, 2135. All with Carter UT2223S or UT2418S. Kit does not include shaft seals as they are not available. (Item #: 112354, Ref: BK201V) $31.80

No
Picture
Carburetor Kit, Comprehensive - For F40, TO35, 135, 150, 202, 204, 2135, 35, 50, all with Marvel Schebler Carburetors - TSX605, TSX683, TSX882. Comprehensive Carburetor Kit contains the following parts for a Major Overhaul with instructions. Includes: gaskets, needles, seats, shafts, springs, and mixture screw. (Tis C549AV) Does not include float. (Item #: 114404, Ref: C549AV) $30.90

Carburetor Kit, Comprehensive - For tractor models TO35, MF35, F40, MH50, MF50, MF135, MF150; IND. 202, 204, 2135. Repair kit for Marvel Schebler carburetors TSX605, TSX683 and TSX882. OEM carburetor numbers 181532M91, 183576M91, 194065M91 and 533969M91 (Item #: 114404, Ref: C549AV) $30.90

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: UT2223S, UT2418S, UT2612S. Replaces Carter number UT cast top and aluminum bottom. For the following tractor models: TO35, 35, 40, 50. Add $50.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203778, Ref: 1605-CARB) $355.01

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX605. For the following tractor models: TO35. Center-to-Center on the mounting bolts is 2 3/8 inches. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203821, Ref: 1606-CARB) $273.01

Carburetor, Rebuilt - Fits TO35 (Deluxe and Standard), 35, 40, 50, 135, 150, 202, 2135 - replacement for OEM 183576M91, TSX683, TSX682. Add $25.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203336, Ref: 1712-CARB) $376.01

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: UT2223S, UT2418S, UT2612S. Replaces Carter number UT all aluminum. For the following tractor models: TO35, 35, 40, 50. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 204515) $320.01

Choke Knob - For Massey Ferguson tractor models TO20, TO30, TO35, 35, 40, 50, 65, 85, 88 Replaces Massey Ferguson OEM number 193346M1, 180708M1, , Compatible with Massey Harris tractor models 50, Replaces OEM number TO9703, (Item #: 126115) $12.50

Fuel Cap - For tractor models TO20, TE20, TO30, TO35, 1100, 1150, 135, 150, 165, 175, 203, 205. Replaces OEM 520948M91. This is a non-vented cap. (Item #: 185782, Ref: D5NN9030A) $9.00

Fuel Filter - Fuel filter element, cartridge type. Comes with 3 o-rings. Overall length measures 3.504, outer diameter of 2.835, and inner diameter of 1.259 on both ends. Used in filter assembly 882272M91 (Purolator) Replaces 32327, 1850450M1, 1850 450M2, 1850450M2, 500764, 894974M91, P551167 and FF5364. (Item #: 172359, Ref: 1850450M2) $6.00

Fuel Filter - Comes with 3 o-rings. Overall length measures 3.504, outer diameter of 2.835, and inner diameter of 1.259 on both ends. For tractor models (TEF20 serial number 336104 and up primary and secondary with Standard Motors 20C Diesel), (TO35, 35, FE35 primary with Standard Motors 23C Engine). Replaces 500764, P551167 and FF5364. (Item #: 172359, Ref: 1850450M2) $6.00

Fuel Filter - Measuring: inner diameter 5/8 inches, outside diameter 3 5/16 inches, length 2 3/4 inches, and 15/16 x 16 UN thread. Replaces 31938, 62594, 70460R91, 7111/44, 1012006M2. This filter is used on some Massey Ferguson tractors with large diameter cartridge filter. Massey Ferguson 2705, 35, 35FE, 50D Indust/Const, 65, 85, 88, TO35 (Item #: 182558, Ref: FF2102) $27.20

Fuel Pump, Standard Diesel - For tractor models TEF20 with 20C Engine - Early Production. For tractor models TO35, 35 and FE35 with 23C up to serial number SJ37180E Standard Diesel Engines. Note: May need to rotate top housing to line up fittings. (Item #: 119798, Ref: 826154M91) $66.00

Fuel Pump, Standard Diesel - For TEF20, 20C Diesel, TO35, FE35, 23C Diesel all late model with short finger after serial number SJ37180E. (Item #: 119788, Ref: 1884857M91) $31.50

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $5.95

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 180060M1. Gasket may be cork or rubber, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.70

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. For the following models:TE20, TO20, TO30, TO35, F40, 35, 50, 65, 85, 88, Super 90 (all gas). Replaces 1001514M1. (Item #: 105382, Ref: 9N9162) $3.20

Fuel Tank - With sender hole. Comes Primered. Also comes with blanking plate kit S.42904 if you are not using the sending unit hole. For the following tractors with Continental engines: TO35, MF35, MF 135, 202 and 204. Replaces original part numbers 189209M93, 189209M91, 189209V91. (Item #: 104099, Ref: 189209M91-93) $230.00

Fuel Tank Cap - For Massey Ferguson tractor models Super 90, TE20, TEA20, TO20, TO30, TO35, 20, 35, 50, 65, 85, 88, 135, 150, 165, 175, 178, 180, 1080, 1100, 1130, 1150, Compatible with Massey Ferguson Combine (s) 300, 410, 510, 540, 550, 750, 760, 850, 855, 860, 865, Compatible with Massey Ferguson Construction and industrial models 30, 50A, 203, 205, 302, 304, 2135, 3165, Replaces Massey Ferguson OEM number 520948M91, 180144M91, 188716M93, (Item #: 154999) $7.70

No
Picture
Fuel Tank, Used - For Massey Ferguson tractor models TO35, 35, 135, 2135 (all with Continental gas engines), Compatible with Massey Ferguson Construction and industrial models 202, 204, Replaces Massey Ferguson OEM number 189209M93, Length: 30-1/2", Width: 18-3/4", Height to top of tank: 9", Height to top of filler tube: 9-1/2", For a new version of this item use Item #: 104099, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435338) $134.01

Gas Tank - For TO35, MF35, 135, 202 with Continental Z-134 Gas Engine. Tank has 2 holes, second hole is for fuel sender. (Item #: 104099, Ref: 189209M93) $230.00

Injector Leak Off Pipe - For tractor models TO35, FE35 with 23C Standard Motors Diesel Engine. (Item #: 178720, Ref: 827257M92) $61.00

Injector Nozzle - These Injector Nozzles are sold individually for models TO35 and FE35 with 23C Standard Motors Diesel. Replaces 890007M2 and 890007M91. (Item #: 179279, Ref: 890007M2) $41.10

Sediment Bowl Assembly - Strainer assembly, for GAS tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65, MF85, MF88 industrials: 35, 202 to serial number 309328, 204 to serial number 343891, 302 to serial number 119700213, 304 to serial number 119750210, 356 to serial number 670001084. The fuel bowl assembly has a 3/8 inch NPT male inlet and 1/4 inch pipe thread (7/16 -24) female outlet, 1-1/4 inch long bowl. Replaces OEM numbers 0236986, 180141V91, 193995M91, 193995M92, 193995V92, 180141M91, 632948M92. (Item #: 105381, Ref: 2NAA9155B) $15.00

Sediment Bowl Assembly - This sediment bowl assembly has 3/8" pipe inlet and 1/8" pipe outlet. Includes a 5/16" line compression adapter fitting. For tractor models TE20, TO20, TO30, TO35. All with Continental Z120, Z129, or Z134 Gas Engines. Sediment Bowl Assembly. To fuel line is 1/8 inch pipe connection, 3/8 inch pipe connection to tank. (Item #: 105370, Ref: 61782C91) $15.50

Gauges

Ammeter - Measures 1.614 inch diameter. 30-0-30 black face with chrome bezel. For models: Super 90, TO35, 35, 50, 65, 85, 88. VERIFY HOLE SIZE AND NOTE GAUGE MAY OR MAY NOT HAVE "POWERLINE" PRINTED ON THE FACE OF THE GAUGE. (Item #: 172843, Ref: 180107M91) $28.30

Ammeter Assembly - Fits all TO and MF models using 30-0-30 amperes. Non-luminous, chrome bezel for 2 inch hole. Replaces 515521M91. (Item #: 121632, Ref: A0NN10670A) $6.60

Ammeter Black Ring - Fits all TO and MF models using 30-0-30 amperes. Black bezel for 2 inch hole. Replaces 515521M91. (Item #: 110410, Ref: A0NN10670A-BLAC) $10.70

Gauge Kit - Instrument and gauge kit includes: proofmeter, temperature, oil pressure and ammeter gauges with chrome bezels. For model TO35. (Item #: 121639, Ref: TOGAUGEKIT) $134.00

Oil Pressure Gauge - 80 pound oil gauge. Fits TE20, TEA20, TO35, MF35, MF50, MF65, Massey Harris 44, 55 Series. For 2 inch hole. Replaces OEM number 506902M92. (Item #: 110411, Ref: FAD9273A) $15.00

Oil Pressure Gauge - For tractor models FE35, TEA20, 135, 148, 165, 168, 175, 178, 185, 188, 35, 65, 765, TO35 with STD. DIESEL ENGINES. (Item #: 104108, Ref: 1853097M91) $21.80

Oil Pressure Gauge, White Face - Chrome bezel. 3/8 inch-24 UNF female thread. For tractor models TE20, TO20, TO30, TO35, F40. All with Z120, Z129, Z134. (Item #: 104105, Ref: 180100M92) $15.30

Proofmeter Drive Assembly - For a DELCO Alternators and Generators. This improved design uses a steel drive gear (originals used a fiber gear). Proofmeter Drive Assembly mounts on original type generator. Fits TO20, TO30, TO35, 35, 50, 65, 85, 88, Super 90, 135, 150, 175, 180, 1080, 1100, Industrials: 30, 31, 35 Turf and Utility, 50, 2135, 2200, 2500, 3165, 202, 204. ALL GAS ENGINES. Includes housing, 2 drive gears and gaskets. 7/8 - 18 threads. Does NOT include cable. (Item #: 113771, Ref: 1751295M91) $26.70

Tachometer Cable - Tachometer cable assembly, 53 inches, threaded ends are 5/8-18 x 7/8-18 one Keyed and one Square end. For tractor models MF85 diesel, MF88 diesel, MF255 early production with A4-326 diesel, MF265 diesel to serial number 9A349238, MF275, MF285 to serial number 9A349238. Industrials: 50C, 320 Skidder, Ferguson TO35 with 23C 4 Cylinder Diesel and FE35 with 23 Diesel up to serial number 829487M91. Replaces 544198M91, 829487M91, 532430M91, 882021M91 (Item #: 173960, Ref: 544198M91) $20.40

Tachometer Cable - Tachometer Cable Assembly, 39 inch. Vinyl covered. It has a 7/8 Inch drive end and a 5/8 inch load end. For tractors: TO35 gas, MF35 gas, MH50 gas, MF50 gas, MF135 Continental Gas, MF150 Continental Gas, MF165 gas, MF175 Industrials: 30 gas, 35 gas utility and turf, 202, 204, 2135 gas, 3165 Continental Gas. Replaces: 1751284M91, 506331M91, 506334M91, 521596M91, 532426M92 (Item #: 121217, Ref: 506331M91) $17.70

Temperature Gauge - For Massey Ferguson tractor models TO35, 35, 50, 135, 150, 165, 175, 180, Compatible with Massey Ferguson Construction and industrial models 20, 30, 40, 202, 203, 2135, 3165, Replaces Massey Ferguson OEM number 180727M92, 46" Cable, (Item #: 104107) $31.60

Tractormeter Drive Assembly, with Gasket - For tractor models TO35, FE35 with Standard Motors 23C Diesel Engine. 1/2" UNF Drive End. (Item #: 162021, Ref: 829489M91) $29.30

Tractormeter (Tachometer) - For TO35, FE35, 87mm, 23C up to serial number 307657. Replaces OEM part number 1850093M93 (41069S). Drive Cable, 48 inches long available as part number 829487M91 (41091S). REPLACEMENT - NOT LIKE ORIGINAL AND MAY NEED BOLT EXTENSIONS FOR MOUNTING DEPENDING ON APPLICATION. (Item #: 173082, Ref: 1850093M93) $47.61

Tractormeter (Tachometer) - For TO35 with Continental Gas Engine (all years), Early MH50 and MF 50 with Continental Engine, 65 Continental Gas. Will also work on Massey Ferguson 35. Replaces 193966M91, 193967M91. (Item #: 104104, Ref: S.42754) $67.00

Water Temperature Gauge - This temperature gauge has a 72 inch Capillary tube, 2 inch Face Diameter, Chrome Ring. 180 degree normal temperature setting, 220 degree pegs top end. 5/8 inch UNF connector. TO20, TO30, TO35, FE35, F40, MH44, 50, 333, 444, 555, MF35, 50, 65, 85, 88, Super 90, 135, 165, 175, 178; ind. 20, 30, 31, 40, 50A, 70, 80, 202 Work Bull, 2200, 3165. Replaces: 1078125M91, 1079390M91, 180727M91, 180727M93, 182652M92, 1850512M94, 881396M91, 899455M91, 108727M93, 1078125M91, 0236708, 1078125M91, 180727M91, 180727M92, 180727M93, 881369M91, 899455M91 (Item #: 104116, Ref: 180727M91) $24.60

Hitch / Drawbar

Clevis - Clevis Assembly with pins, for SDA6. The bolt hole spacing is 3 3/8 inches center-to-center. For MF50, TO20, TO30, TO35. (Item #: 178030, Ref: SDA2) $41.00

Clevis Pin - The Clevis Pin is used to hold the drawbar in part number SDA2. Measure 7/8 inches diameter and 3 3/8 inches long without head. Replaces 07040200, NCA803B. (Item #: 168051, Ref: PT3) $5.00

Crank Arm, Leveling Box - This Leveling Box Crank Arm is for tractor models TE20, TEA20, TO20, TO30, TO35, 20, 31, 35 (France), 35, 35X (France), 40, 50, 65, 130 (France), 135 (UK), 135, 150, 165 (UK), 165, 175 (UK), 175, 178 (UK), 180, 205, 230, 231, 231S, 235, 240 (S, Turkey), 240, 240P, 241, 245, 250, 253, 255, 261, 263, 265, 265S (S, Turkey), 270, 271, 275 (UK), 275, 281, 282, 283 (UK), 283, 285S (S, Turkey), 290 (UK), 290, 298, 302, 304, 360, 362, 365 (s/n: B18009-earlier), 375, 383, 390, 390T, 393, 394S (s/n: D03066-earlier), 396, 398, 399, 698, 2135, 2200, 3050, 3060, 3065, 3070, 3090, 3095, 3125 (France), 3125, 3140, 3165, 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 40B, 40E, 50C, 50D, 50E, 202. Replaces Replaces 81822432, 81717231, C5NN594E, 957E594, 888607M1, 1662382M1, 181349M1 (Item #: 172986, Ref: C5NN594E) $9.10

Drawbar Kit, Swinging - This Swinging Drawbar Assembly contains drawbar: 29.35 inches long, 2.00 inches wide, 1.00 inch thick. Rear drawbar hanger, drawbar clevis assembly and drawbar clevis pin. For tractor models TE20, (TEA20 late only), TEF20, TO20, TO30, TO35, FE35, 50. May come painted red, black or primer. (Item #: 111411, Ref: 49A34R) $130.00

Drawbar, Straight - For tractor models TO35, 135, 150, 165, 20, 30, 3165, 35, 50, 65. This drawbar is 35 3/4 inches OVERALL LENGTH, 2 inches WIDE, 1 1/8 inches THICK. (Item #: 160846, Ref: 184611M1) $59.00

Drawbar, Swinging - Swinging Drawbar is 35.75 inches in length, 2 inches wide, 1.125 inches thick. Also replaces 184611M1. Three 1.032 inch diameter holes at 1.25, 3.25, and 3.25 inches from front. For models:130, 135, 150, 165, 202, 205, 20C, 235, 245, 255, 265, 275, 30B, 35, 40B, 50, 65, TO35. (Item #: 110371, Ref: 531468M1) $86.00

Drawbar, Swinging - Drawbar is 29.375 inches in length, 2 inches wide, 1 inch thick, off-set. Holes on the hitch side are 5/8 inches diameter and located 1-1/2 and 4-3/8 inches on center from end. Holes on the tractor side are 0.950 inches and are locates 1-5/8, 3-5/8 and 7-5/8 inches on center from the end. For tractor models 50, 35, 851, 860, TO20, TO30, TO35. (Item #: 109566, Ref: C0NN805F) $38.10

Eyelet Assembly, Check Chain - This Check Chain Eyelet Assembly fits Several Ferguson, Massey Harris and Massey Ferguson Tractors. The Bolt length is 2 11/16 inches. Thread diameter is 1/2 inch. Eyelet is 1/4 inch diameter. Replaces 180856M9 (Item #: 111911, Ref: EC0N660A) $5.30

Hitch Eyelet Bushing - Verify measurements: 7/16 inch x 5/8 inch x 1 1/2 inch. For tractor models TEA20, TE20, TO20, TO30, TO35, 35, 50. (Item #: 173359, Ref: 180859M1) $1.90

Leveling Box Assembly - For tractor models TO35 and FE35. This Right Hand Leveling Box Assembly uses 5/8 inch pins and opens center-to-center from 17.75 inches to 21.5 inches. Width of the fork is 9/16. Replaces 354068X1 (Item #: 113624, Ref: 8N577A) $61.00

Leveling Box Fork - A=5/8 inch, B= 3/4 inch, C= 11/16 inch, D=14-3/16 inch. For tractors: TE20, TO20, TO30, TO35, FE35, F40, MF35, MF135, MF150, MF65 (used in standard right hand assembly with 10-1/2 inch shaft), also left hand on MF65. (Item #: 110971, Ref: 184358M1) $28.50

Leveling Box Fork - A= 5/8 inch, B= 3/4 inch, C=1/2 inch, D=9-3/4 inch. For tractors: TE20, TEA20, TEF20, TO20, TO30, (TO35 when used with 14 inch shaft). (Item #: 108897, Ref: 890674M1) $26.60

Leveling Box Gear Housing - For tractor models 135, 148, 150, 165, 175, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 25, 250, 255, 265, 275, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 35, 40, 40B, 40E, 50, 65, 765, F40, FE135, FE35, TE20, TEA20, TO35. (Item #: 182821, Ref: 193181M1) $42.20

Leveling Rod, Left Hand - For TO35, 35, F40, MH50, 50, 135, 150, Ind: 202, 204, 2135, 3165. Lift Link, left hand, non-adjustable. Hole centers approximately 20 inches. Replaces 182544M92, 182554M92, 182544M92, 1884720M1, 897661M1, 897661V1. (Item #: 111007, Ref: 182544M92) $44.30

Leveling Rod, LH - Hole-to-hole length is approximately 20 inches. Fits TE20, TEA20, TEF20, TO20, TO30, FE35, TO35, F40. (Item #: 111007, Ref: 182544M92) $44.30

Lift Arm, Lower - Left or right category I, universal right or left. For tractors: Early TO35, MF35, MF50, MH50, F40 industrials: 202, 204. Standard approx. 31-3/4 inch hole centers, 5/8 inch thick. (Item #: 185396, Ref: 191114M91) $130.00

Lift Arm, Lower, Right or Left - Lift Arm for category 1. 32 inches in length to hole centers, and 7/8 inch holes in end sockets (swivel type). One half inch width. Replaces 180847M91, 180847M1 and 30543E91. For tractors: TE20, TO20, TO30, TO35, TEA20 right or left.180846M91 (Item #: 103208, Ref: 9N555B) $52.00

No
Picture
Lower Lift Arm - This lower lift arm comes with category 1 ball ends. Replaces Right or left. THESE LIFT ARMS ARE 33 InchES CENTER TO CENTER OF BALLS, CHECK DIMENSIONS OF OLD ARMS BEFORE ORDERING, MAY NEED TO BE ORDERED IN SETS! For Models 202, 204, FE135, F40, TO35, 35, 35X, 50. (Item #: 170284, Ref: 957E555) $76.00

Low Link Pivot - Pivot Shaft for lower link. Threaded ends 5/8 inch NF and 5/8 inch NF, overall length 5-1/4 inches. For tractors: TO20, TO30, TO35, MF35, MF135, MF150 industrials: 2135, 3165, 202, 204. MF1130. Replaces 181229M2, 181229M1, 181229M4, 181229M5 (Item #: 166280, Ref: 181229M5) $12.20

Pin - Pivot Pin. For swinging drawbar. 1 inch outside diameter by 1-7/8 inch working length. Not for swinging drawbar kit SDA6 which requires part number Pt3, 7/8 inch diameter pin. Fits original swinging drawbar 184611M1. For tractors: TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF230, MF235, MF245, MF255 industrials: MF20C, MF30B, MF40B, MF3165. For MF165, MF65. (Item #: 155129, Ref: 184630M1) $7.70

Stabilizer Arm - Stabilizer Arm for 3-point hitch measures 31-1/2 inch center to center hole spacing. For tractor models F40, TO20, TO30, TO35. Replaces 181778M1. (Item #: 110516, Ref: 230042R) $15.20

Stabilizer Arm, Red, HD - Stabilizer arm for 3-point hitch, high alloy steel, 31-1/2 inch hole spacing. For tractor models F40, 50, TO20, TO30, TO35. 181778M1-XHD. (Item #: 110516, Ref: 230042XHD) $15.20

Stabilizer Bar, Adjustable - 28-1/2 inches to 35 inches, 7/8 inch hole in both ends. For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40. (Item #: 184053, Ref: S.00184) $48.00

Stabilizer Bracket - Used on the left or right side, this bracket has mounting bolt hole spacing of 5 inches on center. It is 6.75 inches long and 0.375 inches thick. This part replaces 231254, C5NNN928D, 181775M1, 181775M91, 181776M91. Color varies. This part may arrive Red, Blue, or Black. (Item #: 111709, Ref: 231254) $13.20

Stabilizer Bracket-LH - For tractor models TE20, TEA20, TED20, TEF20, TO20, TO30, TO35, FE35, F40, 135, 20 Industrial, 30 Industrial, 35, 50 Industrial. Replaces 181776M91, 818662M94 (Item #: 155771, Ref: 181776M91) $33.60

Stabilizer Bracket-RH - For tractor models TE20, TEA20, TED20, TEF20, TO20, TO30, TO35, FE35, F40, 135, 20 Industrial, 30 Industrial, 35, 50 Industrial. Replaces 181775M91, 646102M1, 818661M93, 818661M94 (Item #: 155772, Ref: 181775M91) $31.50

Stabilizer Kit, Heavy Duty - For tractor models F40, TO20, TO30, TO35, 50 <1961. This is a complete set. It contains 181778M1 HD Arms and 49B50r brackets and is 31 3/8 inch center to center. Additional $15 shipping due to weight. (Item #: 152387, Ref: 231253XHD) $64.00

Stabilizer Pin with nut and lockwasher - Category I. Length 2.625 inches, pin diameter .875 inches, thread .625 inches-18. Replaces Original Part Numbers 181777M1, 646101M1, 646101M2. (Item #: 111677, Ref: SBP75-WNL) $1.90

Stabilzer Arm - For Massey Ferguson tractor models F40, TE20, TEA20, TO20, TO30, TO35, 50, Replaces Massey Ferguson OEM number 181778M1, 33.250" Long, 0.375" Thick, 1.75" Wide, 0.937" Hole, 31.562" Center to Center, Additional Handling and Oversize Fees Apply To This Item, (Item #: 108781) $11.17

Swinging Drawbar Hangar - For tractor models 50, TO20, TO30, TO35. Rear Drawbar Hanger. Used in Drawbar Kit number 49A34R. 9.75 inches tall. (Item #: 173155, Ref: 49B71R) $44.40

Swinging Drawbar Hanger - Drawbar Hanger for swinging drawbar. For MF50, TO20, TO30, TO35. SDA3. 9.75 inches tall. (Item #: 173155, Ref: NCA809A) $44.40

Top Link Pin, Hinged - Hinged Top Link Pin. Category I, hinged upper hitch pin assembly 3/4 inch diameter, 9-5/8 inch useable Length. For tractors: TO35, MF35, F40, MF50, MF65. For MF135, MF150, MF35, MF50, TO35 and others. Replaces 180901M91, 180901M1 (Item #: 173190, Ref: 180901M91) $6.70

Hydraulic System

Cover Cap - For 1080, 1085, 130, 135, 150, 165, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 40, 50, 65, 85, MH50, TO35. Hydraulic Cover Cap, 2 bolt. Replaces 180908M1, 520933M91, 182373M91, 190809M1 (Item #: 167498, Ref: 180908M1) $20.00

Cross Shaft - 37 splines on ends, 42 splines in center, 2 inch bushing diameter used with 180910M1 lift arm and 181018M1 bushing. For the following tractors: 130, 135, 150, 165, 202, 203, 204, 205, 2135, INDUSTRIAL 25, 302, 304, 35, 50, 65, F40, MH50, TO35. (Item #: 160155, Ref: 184359M1) $83.01

Dipstick - Hydraulic oil level indicator measures overall length of 7 3/8 inches and 5 inches from the stop down. It is used on tractors models: FE35, Super 90, TE20, TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 203, 204, 230, 231, 235, 245, 253, 255, 265, 275, 360, 362, 383, 65, 85, 88, 202, 205, 302, 2135, 2500, 35, MF 50, MH 50. Replaces 180366M1, 193400M1, 514184M1. (Item #: 111829, Ref: 193400M1) $10.70

Draft Control Boot - Draft Spring Rubber Boot. Fits Multiple Massey Ferguson Models. Replaces 1660439M1, 887654M1, 887654M2. (Item #: 169245, Ref: 887654M1) $3.10

Draft Control Plunger Spring - For tractor models 1080, 135, 150, 165, 175, 180, 202, 205, 20C, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30E, 3165, 35, 360, 362, 375, 392, 40, 40B, 40E, 50C, 50D, 50E, 65, 670, F40, MH50, TO35, TO30, TO20, TE20. Hydraulic Spring. Replaces 182582V1, 180998M1, 182582M1, 182582M1 (Item #: 165989, Ref: 9N547B) $35.30

Draft Control Seat - This Draft Control Spring Seat is used on many Ferguson, Massey Ferguson and Massey Harris tractors. 1.780 inch inside diameter. It replaces OEM numbers: 719011M1, 182581M1, 886351M1, 889346M2, 886351M2 (Item #: 174656, Ref: 182581M1) $15.00

Dual Hydraulic Remote Valve Kit - This Dual Hydraulic Remote Valve Kit includes levers, hoses and Female couplers. Use with Pioneer 8010-4 series male plugs for the couplers (not included). Replaces Massey Ferguson part number 677421. (Item #: 168678, Ref: 677421) $450.00

Hydraulic Diverter Valve - Hydraulic Diverter Valve made for 1080, 1085, 130, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 31, 3165, 35, 360, 362, 375, 383, 390, 392S, 393, 398, 40, 0B, 40E, 50, 50C, 50D, 50E, 65, 85, MH50, TO35 ALL WITH 3/8 inch NPT ports. Verify the diagonal bolt pattern of the part in the picture as this only fits in place of existing cover plate (180908M1 or 182373M91). Hydraulic supply continues available for lift arms, or two additional ports are available along with a return to tank. Only one supply can be selected at a time with hydraulics isolated in other positions. (Item #: 161564, Ref: S.60032) $116.00

Hydraulic Lever, Tension Bolt and Spring Kit - This Hydraulic Lever, Tension Bolt and Spring Kit is used on multiple Massey Ferguson Models. Replaces: 181041M1, 961469M1, 961369M1. (Item #: 173300, Ref: 181041M1) $2.70

Hydraulic Lift Piston Connecting Rod - Hydraulic Lift Rod is used on FE35, TE20, TEA20, TO20, TO30, TO35, and 50 Tractors. It replaces original part numbers 180903M2, 887893M1. (Item #: 155017, Ref: 86563314) $33.20

Hydraulic Pump - For tractor models (TO35 serial number 179304 and up), 35, (50 serial number 516837 and up), 65, 203, 205, 202, 203, 204, 231, 253, 302, 304. Valve Pushes Rearward. Replaces 183005M91, 184473M93, 184773M93. 10 spline w/1 3/8 inch diameter shaft. Horizontal safety valve. This pump is 7 3/4 inches wide, 5 1/2 inches high, 12 1/2 inches long. Shaft Length 6 1/2 inches. ***NOTE: various pumps were used on these models - verify configuration in picture. (Item #: 155591, Ref: 184473M93) $295.00

No
Picture
Hydraulic Pump Kit - For Massey Ferguson tractor models TO35, 35, 35X, 50, 65, 135, 150, 165, 175, Compatible with Massey Ferguson Construction and industrial models 202, 302, 304, 2135, Replaces Massey Ferguson OEM number 556601, Kit Contains: (2) Valve Chamber Assembly, (2) Piston, (1) Front Camblock, (1) Lift Block, (4) Piston Rings, (1) Seal Kit, (2) Repair Kit, (Item #: 174219) $196.00

No
Picture
Hydraulic Pump Piston Rings - For Massey Ferguson tractor models TO35 (s/n: 176304-later), 35 (s/n: 568747-later), 50 (s/n: 568747-later), 65, 135, 165, Replaces Massey Ferguson OEM number 892604M1, 190848M1, Inside Diameter: 21.5mm, Outside Diameter: 23.9mm, Width: 2.3mm, (Item #: 174693) $2.60

Hydraulic Pump Rear Cam Block, Used - For Massey Ferguson tractor models F40, TO35, 30, 31, 35, 50, 65, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 205, 230, 235, 240, 245, 250, 265, 275, 285, 290, 298, 350, 355, 365, 375, 390, 398, 399, 565, 575, 590, 595, 675, 690, 698, 699, 1080, 1085, 2135, Compatible with Massey Ferguson Combine(s) 40, 550, 765, Compatible with Massey Ferguson Construction and industrial models 20, 30, 40, 202, 203, 204, 302, 304, 765, 2200, 2220, 3165, Replaces Massey Ferguson OEM number 894608M1, For a new version of this item use Item #: 113790, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460533) $13.26

Hydraulic Pump Support Peg - Hydraulic Support Peg has no shoulder on the pin. Verify type before ordering. If a stepped pin is needed, order part number 898643M1. This Pin use gasket 180904M1, sold separately. Replaces 180905M1 (Item #: 167221, Ref: 180905M1) $15.80

Hydraulic Pump Support Peg - This hydraulic pump support peg has a step (shoulder) on the pin. The diameter steps from 9/16 inches to 7/16 inches. If you need a straight pin peg, use part number 180905M1. If you need a gasket order part number 180904M1, sold separately. Replaces 898643M1. (Item #: 173297, Ref: 898643M1) $11.20

Hydraulic Pump Support Pin Gasket - This hydraulic pump support pin gasket is used with 180905M1 and 898643M1 hydraulic pump support pins. It replaces 180904M2, 180904M1. (Item #: 167222, Ref: 180904M1) $0.70

Hydraulic Pump Valve Assembly - For tractor models FE35, F40, MH50, TO35, 202, 203, FE35, F40, MH50, 35, 202, 203, Super 90. Replaces 189427M92, 189427M91, 180945M1, 180944M1 (Item #: 170903, Ref: 189427M92) $13.80

Hydraulic Stand Pipe O-Ring - This Hydraulic Stand Pipe O-Ring measures 3/8 inch inside diameter, 1/2 inch outside diameter, 1/16 width. Two are used per stand pipe. Replaces Massey Ferguson part number 195561M1 (Item #: 124228, Ref: 195561M1) $0.50

Hydraulic Stand Pipe Spiral Back Up Ring - This Hydraulic Stand Pipe Spiral Back Up Ring is used on many Massey Ferguson Models. Two are used per stand pipe. Sold individually. Replace part number 195874M1 (Item #: 124229, Ref: 195874M1) $1.80

Hydraulic valve - This is a Single Hydraulic Remote Valve. It bolts to the lift cover in place of 180908M1 cap. (Item #: 166954, Ref: 12012002) $253.00

Hydraulic Valve Kit, Remote Control - This 1 levered, Single Spool Valve includes hoses, quick couplers. The left lever shifts it from 3 point to remote. The right one is the remote operation. It is set up much like the original OEM valve from the 1960s. For tractor models TO35, 35, 135, 150, 175, 180, 1080, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 282, 283, 285, 290, 360, 362, 375, 383, 390, 390T, 398, 399, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E. (Item #: 164384, Ref: S.65502) $527.00

Lift Arm - For tractor models TE20, TEA20, TO20, TO30, FE35, F40, TO35, 130, 135, 202, 203, 204, 205, 2135, 25, 302, 304, 35, 65. Lift arm for both right hand/left hand side. Lift arm has a 1.80 inch inside diameter and 37 spline hole. (Item #: 114032, Ref: 180910M1) $54.00

Lift Arm - This Lift Arm is 2.25 inches with 42 splines. It is 2.125 inches on both ends. For tractor models 135, 150, 165, 202, 204, 2135, 302, 304, 35, 50, 65, F40, TO35. Replaces 180970M2, 180 970M2, 180970M3, 353720X1, 365334X1, 376374X1, 70918887 (Item #: 168806, Ref: 180970M2) $83.00

Lift Clevis - This lift clevis, has on the inside of the yoke, a multi-level face. If you need a smooth face on the inside of the yoke, this is not the correct part and we do not have what you need available. For tractor models 135UK, 165, 180, 20, 203, 205, 20C, 2135, 2200, 230, 235, 245, 30, 302, 304, 31, 3165, 35, 40, 50, F40, MH50, TO35. Hydraulic Lift Clevis. (Item #: 173304, Ref: 180972M2) $29.40

Lift Clevis Bushing, LH - Left hand slotted bushing for rocker on draft control clevis. For 135, 150, 165, 165UK, 175, 175UK, 185UK, 180, 20, 200, 202, 203, 204, 205, 20C, 20D, 2135, 2200, 230, 235, 240, 240S, 245, 265S, 271, 281, 285S, 30, 302, 304, 31, 3165, 35, 40, 50, 65, FE35, MH50, TO35. (Item #: 153601, Ref: 180974M1) $6.60

Lift Clevis Bushing RH - Right hand slotted bushing for rocker on draft control clevis. For 135, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 230, 245, 30, 302, 304, 31, 3165, 35, 40, 50, 65, F40, FE35, MH50, TO35. Replaces 181982M1, 180974M1 (Item #: 153600, Ref: 181982M1) $6.50

Lift Cover Gasket - For tractor models 135, 135 UK, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 202, 203, 204, 205, 20C, 20E, 20F, 2135, 2200, (230, 245, 265, 275 serial number 9A349239), 235, 2500, 255, 256, 282, 30, 302, 304, 30B, 30H, 31, 3165, 35, 40, 40B, 4500, 50, 50A, 50C, 50F, 60, 65, 6500, 6500H, F40, FE35, TO35. (Item #: 112052, Ref: 886549M2) $1.70

Lift Cylinder - For tractor models 202, 203, 204, 205, (35, 50, 65, FE35, all early), TO35. Hydraulic Rockshaft Cylinder has 3 inch diameter, is 7.937 inches long. Used with 184443M91 piston and (3) 184447M1 rings. NOTE: BOLT PATTERN IS 3 3/4" X 3 3/8" WITH 9/16" NF HOLES. THE HOLE SIZES WERE CHANGED BY MASSEY FERGUSON. THE COVER MUST BE REDRILLED AND STUDS CHANGED. REQUIRES (2) 899257M1 9/16"X3" STUD (2) 899258M1 9/16"X4" STUD (4) 368749X1 NUTS - We do not stock these items but they should be available locally. (Item #: 115763, Ref: 184442M1) $93.00

$Ferguson TO35 Lift Cylinder, 2-1\2$
Lift Cylinder, 2-1/2 - Hydraulic Lift Cylinder is for tractor models F35 up to serial number 65684), (TO35 up to serial number 179304), F40, Massey Harris 50, (Ind. 202 up to serial number 301660). (Item #: 178771, Ref: 180967M1) $251.00

Lift Cylinder Piston, 3 inch - Piston is 3 inch (piston ring is available separately, see part number 184447M1). For tractor models FE35, TO35 (serial number 179304 and above), 202, 203, 204, 205, 35, 35 Ind/Turf/Util, 50, 65, Early 135, 150, 165, 2135, 202, 204. (Item #: 112025, Ref: 184443M91) $37.00

Lift Cylinder Piston Ring, 3 Inch - Piston Ring for a 3 inch piston. For tractor models FE35, TO35 (serial number 179304 and above), 202, 203, 204, 205, 35, 35 Ind/Turf/Util, 50, 65, Early 135, 150, 165, 2135, 202, 204. Three are typically used. Sold individually. Replaces 184447M1, 53202383, 830741M1 (Item #: 111673, Ref: 184447M1) $4.60

Lift Piston - This is a single groove Hydraulic Lift Piston that measures 2-1/2 inches in diameter, groove is centered 1 1/4 inch from bottom of piston. O-Ring available as NAA533A and back up washer as NAA473A. For tractor models 202 Indust/Const, 35, 35X, 50 Loader, TE20, TEA20, TO20, TO30, TO35. Replaces 181983M1. (Item #: 116069, Ref: NAA530B) $24.50

Lift Pump Cam Block, Front - This is the Lift Pump Cam Block, front, WITH LIP. For tractors: TO35, MF35, MF50, MF65, MF135, MF165, MF175, MF180. Replaces 894607M1. (Item #: 113791, Ref: 180924M2) $27.00

Lift Pump Cam Block, Rear - For tractors: TO35, MF35, MF50, MF65, MF135, MF165, MF175, MF180. Replaces 894608M1. (Item #: 113790, Ref: 180925M2) $27.00

Lift Pump Camshaft - For tractor models FE35, TO35, 135, 150, 165, 175, 202, 202, 204, 205, 302, 304, 3165, 35, 50, 65, 2135 TURF UTILITY NARROW. This camshaft has 10 spline and 1.3 Inch REAR SPLINE LENGTH. (Item #: 180715, Ref: 181993M91) $144.00

Lift Pump Coupling - 10 spline coupling for models: 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 31, 3165, 35, 40, 50, 65, 85, 88, Super 90, F40, FE135, FE35, MH50, TO35. (Item #: 173680, Ref: 180926M1_) $58.00

Lift Pump Draft Control Spring Retainer Nut - For 1080, 1085, 135, 150, 165, 175, 180, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 30B, 31, 165, 35, 360, 375, 383, 390T, 392, 393, 40, 40E, 50, 50D, 50E, 65, 670, 690, 698, F40, FE35, MH50, TO35. Replaces 180979M1, 180979M2 (Item #: 170928, Ref: 180979M2) $8.90

Lift Pump Follower - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 3165, 35, 360, 375, 383, 390, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 173508, Ref: 180933M1) $10.20

Lift Pump Needle Bearing - Bearing for recess in rear of camshaft for hydraulic lift pump. For tractors: TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, MF375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085 industrials: 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 35, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 3165. (Item #: 184765, Ref: 1000251M1) $6.90

Lift Pump Overhaul Kit - Fits MF35, 65, 135, TO35, 150, 165, 175, 202, 2135, 302, 304, 50, 765. Repairs OEM Pump. Valve chamber has 5 holes on the sides of valve chambers. Hydraulic Pump Overhaul Kit contains (2) 184471M1, (2) 190799M1, 180924M2, 180925M2, (4) 8992604M1, 1810467M91, 556601 (Item #: 168716, Ref: S.40843) $226.21

Lift Pump Plug - For tractor models 135, 135UK, 150, 165, 165UK, 175, 175UK, 178, 180, 20, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 3165, 35, 40, 50, 65, TO35. Hudraulic Pump Plug. Used with 897491M1 Valve Chamber Assembly. (Item #: 180701, Ref: 181999M1) $6.20

Lift Pump Repair Kit - Hydraulic pump overhaul kit. Contains valve chamber assemblies, pistons, piston rings and cam blocks. Tractors: TO35 (serial number 179304 and up), MF35, MF50 (serial number 526837 and up), MF65, MF135, MF165 using 190799M1 .91 diameter piston. Hole sizes: (B) 3/8 inch 9.5mm; (C) 7/16 inch 11.1mm; (D) 15/32 inch 11.9mm. (Item #: 182670, Ref: HPOK3WCB) $182.00

Lift Pump seal kit - For tractor models TO35, 135, 148, 165, 168, 175, 175S, 185, 188, 240, 250, 265, 290, 550, 565, 575, 590, 65, 675, 690, 698, 765, 595 WITH MK2. Replaces 894906M91. (Item #: 184402, Ref: 1810467M91) $5.70

Lift Pump VALVE CHAMBER Repair Kit - For tractors models TO35, MF35, MF50, MF65, MF135, MF150, MF165, MF175, MF180. Hydraulic Pump VALVE CHAMBER Repair Kit. Kit contains (4) 827718M1 rings, (1) o-ring kit, (4) 180928M1 springs, (4) 180930M1 outlet valves, (4) 180927M1 springs, (4) 180929M1 inlet valves. Contains valves, springs, snap rings and o-rings to repair all 4 chamber ports in one tractor. Services 180920M1 and 180921M1 body on early TO35. (Item #: 173170, Ref: 830997M1) $46.60

Lift Shaft - For TO35, 35, 50, Early models of: 135, 150, 165, 35 Turf, 2135U, others with 37 tooth end splines. Replaces 184359M1 184359M2 (Item #: 160155, Ref: 184359M2) $83.01

Lift Shaft Bushing - Bushing is 2.36 inch outside diameter, 1.97 inch inside diameter, 1.39 inches long. For tractors: TE20, TEA20, TEF20, TO20, TO30, FE35, F40, TO35, MF35, MF50, MF65, MF135, MF150, MF165. For shaft 184359M2, 4 required. If Shaft 897567M3 is used, it requires bushing 1870934M1 not supplied. (Item #: 152601, Ref: 181018M1) $8.60

Overload Stop - For tractor models 1080, 1085, 135, 135UK, 150, 165, 165UK, 175, 175UK, 178UK, 180, 20, 202, 203, 204, 205, 20, 2200, 230, 235, 240, 245, 250, 253, 262, 263, 265, 270, 275, 275UK, 282, 283UK, 185, 290, 290UK, 292, 298, 30, 302, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 65, 670, 690, 698, TO35. Overload Stop is round plate with single hole. (Item #: 172681, Ref: 180981M1) $5.70

Piston, Hydraulic Pump - Piston is .80 inch diameter (verify size). For tractor models 50, F40, FE35 serial number prior to <65684, TO35 prior to serial number 179304. (Item #: 173247, Ref: 181043M1) $49.10

Piston, Hydraulic Pump - Piston is .90 inch diameter (verify size). For model TO35 after serial number 179304. (Item #: 173250, Ref: 190799M1) $14.00

Quadrant Stop Kit - For tractor models TE20, TE35, TEA20, TO20, TO30, TO35, 35, 40, 50, 65, Massey Harris 50. Replaces: 825753M1. (Item #: 126615, Ref: 9N521) $8.30

Relief Valve - For tractor models TO35, 135, 150, 165, 175, 180, 235, 245, 255, 265, 2705, 2745, 35, 50, 66. (2750 psi) Replaces 884747M93, 884747M92, 884747M93, 883402M1, 40A63 (Item #: 163455, Ref: 883402M1) $18.50

Selector Valve - Converts MF hydraulic to external service (valve has 3/8 inch BSP thread in pressure ports) This 3 way selecter valve is designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. Provides a positive change over from tractor hyd. to external service. Does away with need to fix the tractor lift arm in the lower position when external service is in use. The 3 point linkage of the tractor can be free for use while the external service remains connected simply by operating the valve. Services lift arms plus three external ports w/ return going back to rear end. Ports can only be used one at a time. Designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. This is a replacement for the earlier VFD1103 (Item #: 161563, Ref: VFD1104) $158.00

Valve Chamber - For tractor models 135, 150, 165, 175, 202, 2135, 302, 304, 35, 50, 65, 765, FE35, TO35. Hydraulic Valve Chamber has .914 inch bore. Chamber only, does not come with valves. (Item #: 112582, Ref: 184471M1) $37.15

Lights

Bracket Set For lights - Fits rounded fenders. For tractor models TE20, TEA20, TO20, TO30, TO35, FE35, F40, MH50, MF50, 65, 85, 90, 135, 150, 165, 175, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 290, 298, IND 20, 20C, 20D, 30, 30B, 30D, 40B, 50C. Replaces 1750674M1, 52335M1, 523334M1. (Item #: 125324, Ref: 9N13471) $57.00

Clips, Bulb Retaining, (Pack of 4) - For tractor models F40, Super 90, TO20, TO30, TO35, 135, 150, 165, 35, 40, 5 0, 65, 85, 88, 98, MH22, MH23, MH33, MH44, MH44-6, MH50. 4 used per headlight (one pack) Replaces 1002808MI (sevicable), 1750642M1 (exactly like). (Item #: 126558, Ref: S.43070) $13.50

Headlight, 12 Volt - This is a serviceable 12 Volt headlight. It is 5-3/4 inch diameter, sealed beam bulb. Will work for left or right side. This light is not like the original. Will replace 505088M91, but is not the same. There is no visor. (Item #: 183739, Ref: S.66419) $56.00

Headlight, 6 Volt, RH or LH - Light is NOT an original replacement. For: TO20, TE20, TO30, TO35. Painted light grey. Will also function on MF20, Super 90, 135, 150, 165, 175, 202, 203, 204, 2135, 302, 304, 35, 65, 85, 88, 95, 97, 98 Replaces 186141M91, 186142M91, 510436M91, 510437M91. (Item #: 113349, Ref: 2N13005C) $52.00

Headlight Washer - Used with light part number 164089AS. For the following tractors: TO20, TE20, TO30, TO35, 35, 40, 50, 65, 85, 135, TEA20-85, 150, 165, 175, 180, 770, 88, 90, Super 90, 97, 1080, 1085, 202, 1100, 1105, 203, 1130, 204, 235, 245, 255, 265, 275, 285, 30, 31 (Item #: 154899, Ref: 504781M1) $5.30

Light Bulb, Sealed Beam, 6 Volt - 4-1/2 inch number 4511. For model TO35 with fender mounted headlights. Replaces 1752866M91. (Item #: 111227, Ref: 373661R91) $13.50

Light Ring - This Light Ring has a 6-5/8 inch outside diameter. It comes with ground wire. Attaches with two screws (not included). Replaces original part numbers 752311M91, 1752311M91 (Item #: 185530, Ref: 1752311M91) $25.20

Round Work Lamp, Chrome Ring - This is a 6 volt work light with switch. It bolts on and includes base bracket. Replaces OEM number 1750692M91 (Item #: 180003) $91.42

Round Work Lamp, Primer Ring - This is a 6 volt work light with switch. It bolts on and includes base bracket. Replaces OEM number 1750692M91. (Item #: 189161) $91.00

Sealed Beam Bulb - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Early fender mount for tractors: TO35, MH50, MF50, MF65 Inner or upper fender for tractors: MF150, 165, 175, 180, 1100, 1130. Fits various other models. (L4411). Replaces 1002803M91, 1509347M1, 1751347M91, 1752866M91, 181856M91, 189544M91. (Item #: 111241, Ref: 373662R91) $9.10

Sealed Beam Bulb 12V - Sealed beam bulb, 12 volt, 5-3/4 inch diameter, 35 watt, Sealed Beam. Trade number 4419. Replaces: 310062, 230252, 2084379, 70230252, T20958, TO17074, 371443R91, 002803M91, 1038428M91, 1751347M91, 1754916M91, 102213A, 30-2020521 (Item #: 111228, Ref: 70230252) $16.00

Sealed Beam Bulb, 6 Inch - Sealed Beam Bulb 6-volt using Double Screw Wire Connectors. For tractor models TE20, TO20, TO30, TO35 (L4019). (Item #: 111244, Ref: 1002802M91) $19.30

Tail Light Assembly - This is a restoration quality Taurus Taillight Assembly. It comes grey Powder Coated bucket and stainless steel rim. Includes 6V bulb, wiring and mounting studs and nuts. Includes small moisture drain hole which was a later year improvement. Massey Ferguson part # 1751422M91 (Excludes bracket) (Item #: 183689, Ref: 9N13404SS) $63.00

Tail Light Bezel - This Taillight Bezel is used on Taurus Taillights 9N13404, 9n13404SS, 1751422M91 and 1750667M91. It is zinc plated steel. (Item #: 179632, Ref: 9N13448) $8.20

Tail Light Bezel - This Taillight Bezel is used on Taurus Taillights 9N13404, 9n13404SS, 1751422M91 and 1750667M91. It is polished stainless steel. (Item #: 191183, Ref: 9N13448SS) $18.51

Tail Light Bracket - This Bracket is used with Taurus Taillights, 1750662M91 and 1741422M91. (Item #: 179554, Ref: 9N13423) $13.90

$Ferguson TO35 Tail Light \ Dash Light Bulb - 12-Volt$
Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 to 12 Volts. (Item #: 150699, Ref: TLBULB12V) $1.70

Tail Light Lens Gasket - This Lens Gasket is used with 9N13404, 9N13404SS, 1750662M91 and 1751422M91 Taurus Taillights. It replaces 9N13460 (Item #: 183014, Ref: 9N13460) $4.60

Tail Light License Lens Gasket - This Lens Gasket is used with 9N13404, 9N13404SS, 1750662M91 and 1751422M91 Taurus Taillights. It replaces 9N13447, 1750666M1 (Item #: 183013, Ref: 9N13447) $3.00

Taillight Mounting Bracket - Exact of original. Manufactured in USA. (goes between tail light and fender bracket). Fits: TE20, TO20, TO30, TO35, 135, 202, 203, 204, 205, 65, 85, 90. Ferguson: 40, 50, 35. Replaces: 1750671M91, 1751824M91, 1751825M1. (Item #: 125325, Ref: 8N13423) $10.50

Tail LIight Lens - This Lens is used with 9N13404, 9N13404SS, 1750662M91 and 1751422M91 Taurus Taillights. It replaces 9N13450 (Item #: 183015, Ref: 9N13450) $14.80

Tail Lite, License Light, Clear Glass Lens - For tractor models TE20, TO20, TO30, TO35, MF35, 40, 50, 65, 85, 90, 135, 202, 204, 205, MH50. Uses Gasket FAA13447A, not included. (Item #: 1750664M1) $21.36

Tail Lite, License Light, Lens Gasket - For tractor models TE20, TO20, TO30, TO35, MF35, 40, 50, 65, 85, 90, 135, 202, 204, 205, MH50.1750666M1 (Item #: 178109, Ref: FAA13447A) $2.60

Worklight Kit, 6 Volt, Chrome - Kit includes, 6 inch steel body, chrome ring, sealed beam bulb, bulb retaining clips, steel worklight mount (socket), and switch. Assembly required. (Item #: 180003, Ref: S.43377) $91.42

Worklight Switch - For tractor models TO20, TE20, TEA20, TO30, TO35. (Item #: 113336, Ref: 8N13740) $15.50

Oil System

Engine Oil Dipstick - For tractor models TE20, TO20, TO30, TO35, 35, 50, 135, 150 all with continental gas engine. (Item #: 121771, Ref: 1750095M1) $7.30

Oil Filler Cap - For tractor models TE20, TEA20, TO20, TO30, TO35, F40 and those using clip type caps. Oil Filler Cap will also replace gas fuel cap (not diesel). Does come with gasket. Measures 2 7/8 inches outside diameter, 1 1/2 inches inside with two outward tabs measuring 1 7/8 inches outside of tag to outside of tab. (Item #: 154962, Ref: 760029M91) $16.40

Oil Filter - Fits Standard Motors 20C/23C Diesel Engines in: TEF20, FE35, TO35. (Item #: 112177, Ref: 826137M91) $11.90

Oil Filter - Measuring 4-3/16 inches in length, 3-15/32 inches outside diameter with a 0.525 center stud hole diameter, this cartridge type filter replaces OEM numbers 835817M91, 1014219M92, 1003879M91, 840751M91, 835817V91, 1014219M92, 15434A, 452050A, 761515M1, 8152AB, AT212, O8926AB, T16546, VT2427. Used in Continental Gas applications. (Item #: 111097, Ref: 835817M91) $11.00

Oil Filter Adapter Kit, Spin On - Does not include filter. Order 113613 for the filter. For tractor models T030, TO35, 35, 40, 50, 135, 150, 202, 204, 2200, 2500, and MH50 with Z129, Z134 or Z145 Continental Engines. Engine Oil Filter Adapter Plate for spin on oil filter. For ordering filters, use part 113613. Replaces: 1069954M91, 1051113M1, 1051114M1, 1051115M1 (Item #: 143112) $34.50

Oil Filter Adapter Kit, Spin On - For tractor models T030, TO35, 35, 40, 50, 135, 150, 202, 204, 2200, 2500, and MH50 with Z129, Z134 or Z145 Continental Engines. Engine Oil Filter Adapter Plate for spin on oil filter (includes filter). For ordering extra filters, use part 1069954M91. Replaces: 1069954M91, 1051113M1, 1051114M1, 1051115M1 (Item #: 113544, Ref: S.42809) $41.00

Oil Filter, Spin On - This filter is included in S.42809 and is the replacement needed for engines converted to spin on filters. Also replaces the following B50, 74512207, 1069954M92, 104397A, 1032015M91, 1025034M91, 928055, HMF600L04340, 7000014641, 70000-14641, 4512207, 160770AS, 538836R1, 51051. Measures 3-11/16 inch outside diameter, 5-3/8 inch long, 5/8 inch number 16 thread. (Item #: 113613, Ref: 1069954M91) $10.30

Oil Pump Shaft and Rotor - For tractor models FE35, TO35 both with Standard Motors 23C Diesel Engine. Also replaces 826059M91. (Item #: 173501, Ref: 827615M91) $156.00

Paint

No
Picture
Paint, Metallic Flint Gray, 1 Gallon - This MF Metallic Flint Gray was used from 1956 through 1965 on models TO35, F40, 35 and FE35. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108102, Ref: TP320GAL) $76.00

No
Picture
Paint, Metallic Flint Gray, 1 Quart - This MF Metallic Flint Gray was used from 1956 through 1965 on models TO35, F40, 35 and FE35. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108101, Ref: TP320QT) $30.10

No
Picture
Paint, Metallic Flint Gray, Spray Can - This MF Metallic Flint Gray was used from 1956 through 1965 on models TO35, F40, 35 and FE35. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108100, Ref: TP320SP) $12.40

PTO / Driveline

Bearing - Bearing, outer, for PTO Output Shaft (inside diameter 1.771 inch X outside diameter 2.952 inch x .629 inch thick) For tractors: TO30, TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175 late production, MF235 For tractors with dry brakes: MF255, MF265 to serial number 9A349239, MF275 to serial number 9A349239. For tractors using snap rings on bearing. (Item #: 172368, Ref: 195498M1) $34.30

Bearing, PTO Drive, Pinion - This PTO Drive Pinion Bearing is a ball bearing type for the PTO drive. For tractor models MF135, MF150, MF165, MF35, MF65, TO35. (Item #: 173341, Ref: 195494M1) $15.30

PTO Cap - For tractor models TO35, 135, 150, 165, 175, 180, 35, 40, 50, 65. Replaces 180313M1, 897268M1, 1868778M1 (Item #: 161741, Ref: 1868778M1) $25.30

PTO Driven Gear - For tractor models 135, 150, 20, 2135, 30, 35, 50, TO35 serial number 169196>. (Item #: 173142, Ref: 182090M1) $155.00

PTO Housing Retainer O-Ring - This O-Ring is 3/16 inch in diameter and has a 2-7/8 inch inside diameter. It replaces OE numbers 195522M1, 70923936, 81801571, C5NN533A (Item #: 173311, Ref: 195522M1) $0.90

PTO Seal - PTO Shaft Oil Seal. 1-3/4 inch inside diameter, 2.685 inch outside diameter. For tractors: FE35, TO35, MF35, F40, MF50, MF65, MF135, MF150, MF165, MF175, MF180. For 20D, MF135, MF165, MF175, MF180, MF235, MF240, MF245, MF255, MF265, MF275, MF35, MF50, MF65, TO35. Replaces 1860325M1, 195506M1, 1077452M1. (Item #: 111984, Ref: 1860325M1) $7.60

PTO Seal - For 135, 150, 165, 175, 180, 20, 20C, 230, 235, 245, 30I, 31, 35, 50, 65, TO35. PTO Drive Shaft Seal. Measures 1.75 x 2.25 x.25 inches. (Item #: 152783, Ref: 195503M1) $3.90

PTO Seal Retainer Housing - This Seal Retainer Housing is used on many Massey Ferguson tractors. Uses 195522M1 o-ring, not included. Replaces part numbers 180465M1, 180465V1 (Item #: 151850, Ref: 180465M1) $22.80

PTO Shaft, 540 RPM - For F135, F35, F40, MH50, TO35, 135, 150, 165, 175, 180, 202, 203, 204, 205, 2135, 2200, 302, 304, 3165, 35, 50, 65 all with Live PTO, (20, 30, 31, 40, all Ind For Live PTO). PTO Shaft 540 RPM, 1 3/8 inch x 22.75 inches long, 10 drive splines, 1 snap ring groove. Replaces: 181204M92, 181204M91, 181204V92, 1812204M92, 1867084M91, M05-39-02. (Item #: 168169, Ref: 181204M92) $60.00

Shaft Bushing, PTO - For 135, 135UK, 150, 165, 165UK, 175, 175UK, 180, 20, 202, 203, 2135, 2200, 230, 235, 2500, 255, 265, 275, 30, 302, 31, 3165, 35, 35FE, 35X, 40, 4500, 50, 65, 6500, TO35. PTO Shaft Bushing. (Item #: 173076, Ref: 180461M1) $11.90

Seats

Bucket Style Base Cushion - Approx 19 inches wide x 15 inches deep x 5 inches thick. Has strap to secure bottom. For models: MH50, TE20, TO20, TO30, TO35, F40, 30, 35, 50, 65, 85, 88, 95, 130, 135, 165, 185, 230, 235. This seat cushion is GREY grained vinyl. (Item #: 101317, Ref: R1000) $52.00

Bucket Style Metal Pan Seat - Color may vary. Size is approximately 19 inches wide x 13 inches deep x 9-1/2 inches high. Fits Models: TE20, TEA20, TO20, TO30, TO35, MF50, MH50, MF35, 50, 65, 85, 88, 98, 135, 150, 165, 230, 235, 240, 245, 250, 265, 283, 333, 444, 555, 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 40, 40B, 50, 50A, 50C, 200, 2135, 2200, 3165. Uses cushion number R1001 and number R1000. (Item #: 113263, Ref: 181313M93) $75.00

Bucket Style Seat and Backrest - Grey seat covered cushions, back and bottom with inlay as pictured. Contains part R1000 and R1001. For tractor models MH50, TE20, TO20, TO30, TO35, F40, 30, 35, 50, 65, 85, 88, 95, 130, 135, 165, 185, 230, 235. This kit contains: backrest assembly (part number 181324M1 inlay and 513353M91 cover), seat cushion assembly (part number 181326M1 inlay and 513351M91 cover). (Item #: 133469, Ref: FCX810) $96.00

Bucket Style Seat Back - Curved seat back measures approximately 16 inches wide x 4-1/2 inches tall x 2 inches deep. Has 2 mounting studs (on back) spaced approximately 9-1/4 inches apart. For tractor models MH50, TE20, TO20, TO30, TO35, F40, 30, 35, 50, 65, 85, 88, 95, 130, 135, 165, 185, 230, 235. This seat back is GREY grained vinyl. (Item #: 101318, Ref: R1001) $42.60

Pan and Seat Cushion Set - Comes with black metal pan, black bottom cushion and black backrest cushion with metal plate and hardware. For tractor models: 135, 150, 165, 20, 20C, 20D, 2135, 2200, 235, 245, 265, 282, 283, 30, 30B, 30D, 30E, 3165, 35, 40, 40B, 50 LOADER, 50A, 50C, 555, 65, 85, 88, 98, TE20, TEA20, TO20, TO30, TO35. Replaces 181313M93, 181324M1. (Item #: 178546, Ref: 1210-1604) $156.00

Seat Cushion - New Black Canvas Seat Fits Massey Ferguson 35, 20, 202, 203, 204, 205, 30, 40, F40, TE20, TO20, TO30, TO35, 130, 135, 150, 185, 230, 235, 250, 283, 50, 65, 85, 88, 95 Models Interchangeable with 1690046M91-1, 1753008M1 (Item #: 183821, Ref: 1753008M1) $74.00

Seat Cushion Set - Black seat cushion and backrest cover and inlay assembly. NOTE CUSHIONS MAY COME WITH WHITE PIPING. Consists of one MFCC13 and BR205. Fits later production MF235 and MF245 tractors with foam float seat. Replaces 181324M1, 181326M1, 513353M91. (Item #: 168734, Ref: FCX811) $123.00

Seat Pan, Flip-over - For tractor models TE20, TEA20, TO35, FE35, F40, TO20, TO30, MH50. Replaces 181330M91. May come as a different color than pictured. (Item #: 101239, Ref: C5NN400AE) $55.00

Sheet Metal / Body Parts

Bolt, Hood Pivot - For tractor models TO20, TO30, TO35, TE20, TEA20, 35. One used on each side panel. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 114034, Ref: 180718M1) $5.30

Bumper - Designed for Fords, these may need slight modification for Ferguson and Massey Ferguson fit. For TE20, TO20, TO30, TO35, 35, 135. Heavy Duty Front Bumper. Different from original. Additional $15 for shipping due to weight. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104060, Ref: 311541HD) $177.00

No
Picture
Fender - These Clamshell Fender Skin For TE20, TEA20, TO20, TO30, TO35, 35, 135, 230, 235, 245, 2135, 20. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces: 526904M91 (Item #: 100026, Ref: 526904M1) $101.00

Fender, Clamshell without Bracket - Fender Panel (Fender Skins) comes as pictured without bracket, dished type, made exactly like the original. Price is for one fender. For tractors without roll-over protection structure. For tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65 exc. Orchard, MF85 standard, MF135 except Vine and Orchard, MF150, MF165, MF175, MF230, MF235. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 100026, Ref: 526904M1) $101.00

Fender - Less Toolbox - With ORIGINAL STYLE BRACKET. Fender comes with toolbox hole (NO TOOLBOX), must fit New/Used toolbox into fender, check fit before painting. For tractor models TO35, 35, Massey Harris 50, 50, 65, 135, 35 Ind., 2135, 202, 203, 204, 205. Replaces 180736M92. Add additional $150.00 to shipping due to weight. (Item #: 178722, Ref: S.43774) $323.00

Fender With Bracket - With NON-ORIGINAL TYPE BRACKET. Rear fender, dished type with mounting bracket, mounting bracket spot welded on. For tractors without roll-over protection structure. No tool box hole. For tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65 except Orchard, MF150, MF165, MF175, MF230, MF235 except Vine and Orchard, MF245, MF255 with 16 inch rims, MF265 standard, MF275 standard, MF285 standard Industrials: 20 except Turf, 20C except Turf, 30 except Turf, 30B, 35 Utility, 40, 50, 50A, 202, 203, 204, 205, 2135 Utility, 3165 Utility, also these models with 4-post R.O.P.S., 30D, 40B, 50C. For MF1100, MF1105, MF1130. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104069, Ref: 8N16312) $102.00

Fender with Rounded Bracket - Fender with rounded bracket less TOOL BOX. For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40, MH50. Additional $140.00 shipping due to weight. (Item #: 125421, Ref: S.66428) $112.00

Fender with Toolbox - Fender comes with toolbox, NOT assembled, must fit toolbox into fender, check fit before painting. For tractor models TO35, 35, Massey Harris 50, 50, 65, 135, 35 Ind., 2135, 202, 203, 204, 205. Replaces 180736M92. Additional $145.00 shipping due to weight. If you want 2nd matching fender without tool box hole, order S.66428. (Item #: 116087, Ref: S.43775) $332.00

Grill - For TO35, MF35 up to serial number 231863. Will fit later MF35 if you replace the mounting brackets part numbers 189307M91 and 189308M91 which we do not have. This grill also replaces 191383M91. (Item #: 114532, Ref: 180656M91) $80.00

Grill Panel - Lower - For TO35 to serial number 204408. Replaces 180615M91. (Item #: 126572, Ref: 180615M91) $117.00

Grill Panel, Lower - For tractor models TO35 after serial number 204408 and gas only, MF 35 Turf Model. (Item #: 126571, Ref: 186888M91) $100.00

Hood Latch Bolt - Bolt with special wing nut, for hood latch assembly. For tractor: TO35. .320 diameter, 5.25 long. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. 180766M91 (Item #: 125416, Ref: 180654M1WN) $7.70

License Plate Bracket - This License Plate Bracket is used with Taurus Style Tail Lights. Originally used 1939 to 1949. Replaces original part number 1181801M91. (Item #: 183016, Ref: 9N13406) $10.40

Metal Toolbox, In-Fender Style - For tractor models: T035, MF35, 50, 135, Industrial 35, Utility 2135. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Also replaces S.60010. (Item #: 116980, Ref: 180737M1) $56.00

Rubber Hood Pads - Rubber Hood Supports. These rubber pads fit onto cowling under hood. For TE20, TEA20, TO20, TO30, TO35, F40. Replaces OEM 180673M1. (Item #: 113797, Ref: C5NN16N655B) $1.20

Running Board Kit - Right Hand and Left Hand - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 35, 35 (France), 35X (France), 135 (UK), Replaces Massey Ferguson OEM number 180716M91, 180717M91, 191929M92, 890353M91, Step platform left and right sides, gas engine, Comes in red primer ready to paint, For Running Board - Right Hand use Item #: 111172, For Running Board - Left Hand use Item #: 111165 (Item #: 161139) $100.00

Step Plate Bracket, Rear - For use with 61127S and 61128S Step Plate Assembly. Fits TE20, TEA20, TEF20, TO20, TO30, TO35. Replaces 180590M1. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 111624, Ref: S.42997) $14.40

Step Plate - Left - For TE20, TEA20, TEF20, TO20, TO30, TO35. Left Hand Step Plate. 24 inches in length. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 111165, Ref: 180717M91) $73.00

Step Plate - Right - For TE20, TEA20, TEF20, TO20, TO30, TO35. Step Plate - Right. 24 inches in length. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 111172, Ref: 191929M92) $56.00

Toolbox - Metal comes primered, COLOR MAY VARY. Restoration Quality. 11 inches X 4 1/2 inches X 4 inches. Fits TRACTORS: TE20, TO20, TO30, TO35, 135, 165UK, 240, 250, 550, 560, 565, 575, 670, 690, 698, 699. Fits INDUSTRIALS: 20E, 20F, 30E, 40E, 50E. Replaces 1662749M91 AND 909616M94. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178901, Ref: 825633M91) $42.60

Steering

Axle Bushing - Front pivot support bushing. For tractors: TE20, TO20, TO30, TO35. 1-15/16 inch outside diameter, 1-25/32 inch inside diameter, 1-1/2 inches long. Replaces 180344M1 (Item #: 110832, Ref: 2N3039) $8.10

Axle Bushing, Flanged - Front pivot support bushing with swept back axle. 2.075 inch outside diameter, 1.750 inch, .820 inches long. For tractor models TE20, TO20, TO30, TO35, MF35, MF135, MF235, 20, 2135. Length of bearing may vary but will fit application if over .790 inches. (Item #: 114715, Ref: 182850M1) $7.20

Axle Pin Bushing - Long variation of 182850M1. For the same application but length is 1.482 inches. For: TE20, TO20, TO30, TO35, MF35, MF135, MF235 industrial: 20, 2135. 2.075 inch outside diameter, 1.750 inch, 1.482 inches long. (Item #: 184791, Ref: 182850M1-L) $6.70

Axle, Swept Front with Bushing - For Massey Ferguson: Industrial 20, 2135, FE35, TE20, TEA20, TEF20, TO20, TO30 TO35, 135, 230, 235, 35. Swept Front Axle with Bushing. (Item #: 173497, Ref: 183219M91) $165.00

Drag Link Dust Cover - Rear Tie Rod Boot with leather insert. Fits tractor models TEA20, TO20, TO30, TO35, MF35. Replaces: TO3324. (Item #: 178150, Ref: 9N3324OE) $16.00

Front Axle Pin - Solid Center - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 20, 35, 35X, 135, 135 (s/n 9A86902-earlier), 148 (s/n 604669-earlier), 2135, Replaces Massey Ferguson OEM number 183221M1, 193746M1, Diameter: 1.75", Length: 5.50", (Item #: 155652) $29.90

Gasket, Steering Box Mounting - For tractor models F40, FE35, TO35, 1080, 1085, 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 20C, 2135, 230, 231, 235, 245, 255, 261, 265, 282, 285, 30, 30B, 31, 40B, 50A, 50C, 50D, 35, 35 UK, 40, 50, MH50. Replaces 520307M1, 5230307M1, 180511M1, 180511M2, 180511M92 (Item #: 168134, Ref: 180511M2) $4.30

Jam Nut, Left Hand Thread - Used with 193733M91, this Jam Nut has .687 inch diameter 18 left hand thread. The hex diameter is 1-1/16 inches. Used on Massey Ferguson 20 Turf, 2135 Turf, TO35, 135 Deluxe / Special, 230 below serial number 9A349239 with Swept Back Axle, 235 with standard Swept Back Axle, 35. Some of these models may have clamping type tie rod tubes, where this nut is not used. Replaces Massey Ferguson part number 193068M1 (Item #: 105111, Ref: 193068M1) $11.10

Jam Nut, Right Hand Thread - Used with 180507M91 or 180381M91, this Jam Nut has .687 inch diameter 18 right hand thread. The hex diameter is 1-1/16 inches. Used on Massey Ferguson 20 Turf, 2135 Turf, TO35, 135 Deluxe / Special, 230 below serial number 9A349239 with Swept Back Axle, 235 with standard Swept Back Axle, 35. Some of these models may have clamping type tie rod tubes, where this nut is not used. Replaces Massey Ferguson part number 193067M1 (Item #: 105112, Ref: 193067M1) $9.20

Pivot Pin - Pivot Pin for swept back axles. VERIFY MEASUREMENTS. 1-3/4 inch outside diameter, 5 1/2 inches long, 1 inch bolt hole (which adequately replaces a 7/8) and 1 inch diameter crank hole. Will fit shorter applications. Fits TO20, TO30, TO35, 35, 135 prior to serial number 9A86902; Industrials: 20 prior to serial number 9A86902; 2135 Turf and narrow. Use bolt part number 181953M1 Replaces 193746M1. (Item #: 128512, Ref: 183221M1) $34.60

Planetary Selector, Used - For Massey Ferguson tractor models F40, TO35, 35, 35X, 50, 135, 150, 165, 175, 180, 230, 231, 235, 240, 240P, 241S, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 398, 431, 451, 471, 481, 491, 492, 543, 583, 596, 1080, 1085, 2625, 2650, 2660, 2670, 2680, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4263, 4265, 4345, 4355, Compatible with Massey Ferguson Construction and industrial models 11, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50A, 50C, 50D, 50E, 50H, 60, 202, 203, 204, 205, 302, 304, 356, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 180446M1, For a new version of this item use Item #: 173169, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460974) $8.01

Power Steering Cylinder Kit - Includes: cylinder housing, piston, plate, adapter, rack, pin power steering rack, nut 1/2-20 toplock, snap ring and rod. For the following tractors: 135, 20, 2135, 35, 35 Turf, 35 Utility, TO35. Requires, but does not include a seal kit OEM number 835682M91. We do not have the seal kit available. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 165267, Ref: 1041940M91) $577.00

Power Steering Cylinder Rack - For 35, TO35, 135, 2135, 20. Power Steering Cylinder Rack, new style. To add to order enter in comment section. must be used with "new style" shaft Rack and Pin Set Available as part number 1751665M1KIT (Item #: 155114, Ref: 1751665M1) $158.00

Power Steering Gear Bearing and Races - These Bearing and Races are used on the Steering Worm Shaft on power steering models; TO35, 20, 135, 2135. Replaces 1751676M1 (Item #: 170142, Ref: LA33586A) $48.70

Power Steering Gear Rack Wear Block Assembly - Assembly contains Plate, Ware Block and 2 Screws. For tractor models 35, TO35, 135, 2135. Power Steering Gear Rack Wear Block Assembly. Also replaces 1751653M1, 751644M1, 1751643M1, 1751644M1. (Item #: 178301, Ref: 1751653M1) $43.40

Power Steering Piston Rod Seal - This power steering piston rod seal has a .625 inch Inside Diameter, a 1.128 inch Outside Diameter and is .25 inch wide. It Fits: 135, 2135, 35, FE35, MF20 Industrial, TO35. Replaces: 1751701M1 (Item #: 178140, Ref: A26778) $8.50

Power Steering Pump with Reservoir - For tractor models MH50, TO35, 135, 202, 203, 204, 2135, 35, 40, 50, 65, (150 AG GAS (CONT ENG)GAS/DSL). Replaces part number 182493M92, 191277M91, 191423M92, 191426M91, 191486M91. Pump comes with internal relief valve. (Item #: 112571, Ref: 544443M91) $530.00

Power Steering Rack, Pin, Rod Kit - For tractor models 135, 2135, 35, TO35. Power Steering Rack (1751665M1), Pin (1041936M1) and Rod (1751662M1). Kit also includes nut and snap ring (364449M1 and 355912X1 [X2]). (Item #: 1751665M1Kit) $158.00

Power Steering Valve Assembly - For tractor models TO35, 35, 135, Industrials 20, 35, (2135 Turf). Replaces 1755047M91. (Item #: 182808, Ref: 1018735M92) $740.00

Spindle Bushing - Spindle Bushing for tractor models 135, 148, 20, 20C, 2135, 230, 235, 240, 250, 35, FE135, FE35, TE20, TO20, TO30, TO35. Bushing Measures 1.395 inches outside diameter X 1.265 inches inside diameter X 1.5 inches long. (Item #: 102473, Ref: 180345M1) $2.80

Spindle, LH - This spindle measures A=11 inch, B=1 1/4 inch, C=3/4 inch UNF. For tractor models TE20 serial number 49999 and up, 35, FE35, TEA20, TED20, TEF20, FE35, to serial number 368615, TO20, TO30, TO35. Also replaces OEM number 897415M91. The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102472, Ref: 180349M92) $55.00

Spindle Nut - Castle Nut is 3/4 inch x 16 UNF. Replaces 353928X1, 376451X1. (Item #: 156038, Ref: 387930S36) $1.10

Spindle Repair Kit - (4) 180345M1 bushings, (2) 18560X thrust bearings, (2) 180355M1 spindle dust seals. For tractor models FE35, TEA20, TED20, TEF20, TE20, TO20, TO30, TO35, 135, 20, 2135, 230, 235, 240, 240S, 35. (Item #: 104970, Ref: SBBSKIT01) $29.30

Spindle, RH - This spindle measures A=11 inch, B=1 1/4 inch, C=3/4 inch UNF. Fits tractor models TE20 serial number 49999 and above. 35, FE35, TEA20, TED20, TEF20, TO20, TO30, TO35, MF35. Also replaces OEM number 897414M91. The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102471, Ref: 180346M92) $61.00

Spindle Thrust Bearing - This Spindle Thrust Bearing measures 1.250 inch inside diameter, 2-3/16 inch outside diameter, 5/8 inches deep. Replaces 195175M1. For tractor models 20, 2135, F40, FE35, MF135, MF150, MF165, MF230, MF235, MF245, MF35, MF50, MF65, TE20, TO20, TO30, TO35. (Item #: 102478, Ref: 18560X) $7.10

Steering Arm - For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, 135 UK, 135, 148, 230, 240, 250, 35. Replaces 180 350M1, 180350M1 (Item #: 102536, Ref: 180350M1) $30.00

Steering Box Assembly - Steering Box Assembly, for manual steering tractors. Length 17 inches. uses 1691798M1 steering wheel. Used on 231, 240, 250, 20D, 30E, 40E (Will also work on; 35, 50, 20, 135, 2135, 235, 202, 203, 204, 205 by ordering two 827690M1 'cup and lock ring sets' and 1691798M1 Steering Wheel.) Replaces 1673663M1, 1673663M91. Does not come with Mounting Gasket or Shifter Cups. (Item #: 161571, Ref: 1673663M1) $533.00

Steering Column Grommet - Verify Measurements: 1 3/8 inch inside diameter, 2 3/8 inch outside diameter. For tractor models TO35 (serial number 154616-204180), 25, F40, 50, 65, 85, 88, 90, 356, 10, 12, 14. (Item #: 126706, Ref: 180575M1) $15.00

Steering Column Kit, Manual - Used on manual steering column. Kit contains column spring, seat and bearing. For model TO35. (Item #: 118504, Ref: S.67122) $34.87

Steering Column Shim Kit - This Shim Kit contains 2 - .020 Shims, 2 - .010 Shims, 2 - .005 Shims. TO35, 100, 135, 2135 (industrial), and 35. Replaces 830627M91 (Item #: 179603, Ref: 8N3595KIT) $25.50

No
Picture
Steering Rack Rod - For Massey Ferguson tractor models TO35, 35, 135, Compatible with Massey Ferguson Construction and industrial models 20, 2135, Replaces Massey Ferguson OEM number 1751662M1, Only for applications that have an updated steering rack., Will not replace original rod, Rod only, (Item #: 173650) $65.00

Steering Sector Kit - This Steering Sector Kit is for 1 side, 2 kits used per tractor. Kit contains adjuster bolt, nut, washer, o-rings, shims, and felt seal. (Adjuster Bolt is Allen Head Type, not slotted like original). For models TO35 and FE35. Replaces 1023837M1, 180560M1, 180562X1, 22-456X, 353428X1, 353436X1, 353440X1, 830628M91, and 833455M1. (Item #: 178090, Ref: S.67109) $22.60

Steering Shaft and Nut Assembly - For Power Steering on TO35, 35, 135 (>serial number 641016186), 2135 (prior to serial number 646001410). Shaft measures 21 3/4 inches overall length. Replaces 1751666M1, 1751666M91. (Item #: 182854, Ref: 1751666M91) $212.00

Steering Shaft Assembly - For TO35, 35, 135, 202, 203, 204, 205, 2135 with Manual Steering. 21 3/8 inches Long. (Item #: 165143, Ref: 180538M91) $189.00

Steering Shaft Bearing and Cup Assembly - Upper/lower. For tractor models 135, 2135, 35, Super 95, TO35. All with manual steering. Price is for one set. 2 required per steering shaft/top and bottom. Replaces OEM 180549M1 and 180526M1. (Item #: 111857, Ref: 8N3505) $14.30

Steering Shaft Bearing Assembly - For Steering Column (without Power Steering). Tractors: TE20, TEA20, TO35, 35, 135, 20, 2135. Replaces original part number 180528M91. (Item #: 124501, Ref: 8N3517) $25.60

Steering Shaft Bearing Cone - Upper/lower. For tractor models 135, 2135, 35, Super 95, TO35. All with manual steering. Replaces OEM 180549M1. (Item #: 111857, Ref: 8N3571-OE) $14.30

$Ferguson TO35 Steering Shaft Bearing Cone - Upper\Lower$
Steering Shaft Bearing Cone - Upper/Lower - For Massey Ferguson tractor models TO35 (manual steering), 35 (manual steering), 95 (manual steering), 135 (manual steering), Compatible with Massey Ferguson Construction and industrial models 2135 (manual steering), Replaces Massey Ferguson OEM number 180549M1, For Steering Shaft Bearing Cup - Upper/Lower use Item #: 111857, (Item #: 173671) $14.10

Steering Shaft Bearing Cup - Upper/lower. For tractor models 135, 2135, 35, Super 95, TO35. All with manual steering. Replaces OEM 180526M1. (Item #: 173338, Ref: 8N3552) $12.80

No
Picture
Steering Shaft Bearing Cup -Upper/Lower - For Massey Ferguson tractor models TO35 (manual steering), 35 (manual steering), 95 (manual steering), 135 (manual steering), Compatible with Massey Ferguson Construction and industrial models 2135 (manual steering), Replaces Massey Ferguson OEM number 180526M1, O.D.: 1.7515", Width: .390", For Steering Shaft Bearing - Upper/Lower use Item #: 111857, (Item #: 173670) $19.40

Steering Shaft Seal - 49/64 inch X 1 3/8 inch X 25/64 inch. For tractor models 135, 20, 202, 203, 204, 205, 2135, 230, 235, 245, 35, TO35. Replaces 1876951M1. (Item #: 172323, Ref: 1751702M1) $8.70

Steering Wheel - For TO20, TO30, TO35, 35, 135, F40, 50, and 65. 17-3/4 inch diameter, 3/4 inch hub with 3/16 inch keyway. Covered Metal Spokes. (41486S) (Item #: 122474, Ref: 180576M1) $26.50

Steering Wheel Nut - Zinc Plated Steel Nut, Steering Wheel Acorn Style. 5/8 - 18 NF thread. 1.132 inches tall. 1 inch wrench size. Replaces 207562, 70207562, 913133, 351103-S, 351103S, 751454R1, AL2315T, 195592M1 (Item #: 183746, Ref: 351103S) $9.00

Steering Wheel Nut, Black - Black, Domed. For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40. Repalces OEM 195592M1. (Item #: 351103CCBlack) $7.86

Steering Wheel Nut, Chrome - Chrome, Domed. For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40, 20, 202, 203, 204, 205, 50E, Pony, Super 90, 135, 135 UK, 270, 283, 290, 298, 35. Repalces OEM 195592M1. Head uses a 1 1/8 inch wrench. (Item #: 150988, Ref: 351103CC) $8.10

Steering Wheel - Original Type - For tractor models TE20, TEA20, TO20, TO30, TO35, 20, 35, 135, 50, 65, 2135. 17-3/4 inch diameter, 3/4 inch hub with 11/16 inch keyway. Metal Spokes. (Item #: 101418, Ref: 180576M1-OE) $27.30

Steering Wheel Washer - This steering wheel washer is 1.497 inch outside diameter, 0.645 inch inside diameter and is 0.180 inches thick. It is used on F40, TE20, TO20, TO30, TO35, 135, 35, 50, 65, 85, 88, 202, 204, 2135. Replaces 180577M1, 180577V1, TO3673. (Item #: 179684, Ref: 180577M1) $4.40

Tie Rod Assembly - Drag Link Assembly. For the following tractors: 135 DELUXE/SPECIAL, 20 TURF, 2135 TURF, 230 SWEPT AXLE with serial number to 9A349239, 235 STANDARD SWEPT AXLE, 35, TO35. Includes Ties Rod Ends 193733M91 and 180507M91 and Tie Rod. Length, overall 39.5 inches end to end. (Item #: 105107, Ref: 180780M92) $65.00

Tie Rod End, LH Thread - 3.312 inches in length, .687 inch diameter 18 left hand thread. For tractor models 135, 20, 2135, 230 swept axle serial number <-9A349239, 235 swept axle, 35, TO35. If you have a Jam Nut style tube (as opposed to clamping style), and need to replace the nut, it is available separately as part number 193068M1. Replaces 180391M91, 193733M91, 193733V91, 194607M91. (Item #: 105108, Ref: 193733M91) $15.90

Tie Rod End, RH Thread - 3.60 inches in length, .687 inch diameter 18 right hand thread. For tractor models 135, 20, 2135, 230 swept axle serial number <-9A349239, 235 swept axle, 35, TO35. (Item #: 105109, Ref: 180507M91) $20.60

Tie Rod Tube - Tie Rod Tube. Length: 34.810 inch. 11/16 (.687) - 18 thread RH one end and LH on other. For: 135 Deluxe/Special, 230 Swept Axle to serial number 9A349239, 235 Swept Axle, 35, TO35. (Item #: 105110, Ref: 193069M1) $61.00

Wheel Hub - Front Wheel Hub. Six bolt. For the following tractors: 35, 50, 65, MH50, TE20 (serial number to 49998 and 52497-52565), TO30, TO35. Replaces 180338M91, 898085M91. (Item #: 133657, Ref: 180338M92) $48.00

Wheels

Bolt and Nut Kit - Rear Rim to Wheel Center - Kit contains (1) 2.88 inch x 5/8 inch UNF bolt (bolts have a small key at end) with (1) nut. Replaces 828217M1 and 353427X1. For rear wheel on: TE20, TEA20, TED20, TEF20, TO20, TO30, TO35, FE35. (Item #: 182520, Ref: S.04352) $3.00

Dual Wheel Adapter - Measuring 2 3/4 inches over all length, with 9/16 UNF threads male and female sides, this adapter is used on Massey Ferguson 133, 135, 140, 148, 150, 20, 202, 204, 20C, 20D, 2135, 230, 231, 235, 240, 245, 30, 3165, 340, 342, 35, 35X, 50, 550, 65, 765, TE20, TEA20, TED20, TEF20, TO20. Replaces 818017M1 (Item #: 179639, Ref: 818017M1) $15.00

Front Lug Nut - Used on Ferguson and Massey Ferguson models 1100, 1130, 135, 148, 150, 165, 168, 175, 178, 180, 202 Indust/Const, 203 Indust/Const, 204 Indust/Const, 205, 20D Indust/Const, 20F Indust/Const, 2135 Indust/Const, 250, 253, 255, 263, 265S, 270, 271, 275, 281, 282, 283, 290, 30E Indust/Const, 30H Indust/Const, 3165 Indust/Const, 340, 342, 35, 350 Indust/Const, 352, 355, 360, 362, 365, 372, 375, 383, 390, 390T, 393, 396, 399, 40E Indust/Const, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50 Loader, 565 Combine, 575 Skid Steer Loader, 590, 65, 670, 675, 690, 765, 85, 90, F40, TE20, TEA20, TO20, TO30, TO35, the nut has 1/2 inch - 20 thread and is 1-1/16 hex head. Replaces 195489M1, 195490M1, S9512A. (Item #: 112060, Ref: 195490M1) $2.30

Front Rim - 4.50" x 16", 6 bolt, 6" circle, 4-5/8" pilot, 5.50 or 6.00 x tire. For tractor models 135, 150, 165, 165 UK, 175, 180, 202, 203, 204, 205, 20C, 2135, 230, 231, 235, 240, 240P, 240S, 245, 250, 253, 263, 265, 270, 275, 290, 35, 360, 375, 390, 390T, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4265, 4325, 4335, 4345, 4355, 50, 65, 85, 88, Super 90, TE20, TEA20, TO20, TO30, TO35. Replaces 885741M3, 1077283M91, 535448M91, 506020M91, 195638M91.1883335M3 Additional $15 shipping due to weight. (Item #: 103756, Ref: 8N1015D) $70.00

Front Rim, 4.50 x 16 - Front wheel, with weight holes. 4.50 inch x 16 inch, 6-bolt, 6 inch bolt circle with 4.62 inch pilot for 5.50 inch or 6.00 inch x 16 inch tires. 2500 pound capacity. For tractor models 135, 150, 165, 165 UK, 175, 180, 202, 203, 204, 205, 20C, 2135, 230, 231, 235, 240, 240P, 240S, 245, 250, 253, 263, 265, 270, 275, 290, 35, 360, 375, 390, 390T, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4265, 4325, 4335, 4345, 4355, 50, 65, 85, 88, Super 90, TE20, TEA20, TO20, TO30, TO35. Replaces 885741M3, 1077283M91, 506020M91, 195638M91, 535448M91, R2055, and 1883335M3. Additional $15 shipping due to weight. (Item #: 103756, Ref: 8N1015D) $70.00

Front Wheel Hub Seal - This Front Wheel Hub Seam measures 9/16 inches inside diameter, 2 11/16 inches outside diameter and 3/8 inches wide. Replaces OEM numbers 646110M1, 6110M1, 897363M1, 897363V1, 190443M1, 2048A, 319394M1, 2048B, 180008M1, 105334, G13053 (Item #: 112187) $5.60

Hub Cap Without Zerk Fitting - Threaded. 2.00 inch outside thread diameter, 24 right hand threads. For tractor models 135, 150, 202, 203, 204, 205, 2135, 35, 40, 65, FE35, TE20, TO20, TO30, TO35. Replaces 1884289M1 (Item #: 183735, Ref: 2N1139B) $11.40

Hub Cap WITH Zerk Fitting - Threaded. For tractor models 135, 150, 202, 203, 204, 205, 2135, 35, 40, 65, FE35, TE20, TO20, TO30, TO35. 2.00 inch outside thread diameter, 24 right hand threads. Has Zerk fitting center of cap. 2.00 inch with 24 RH Thread. (Item #: 100661, Ref: 1884289M1WZ) $6.50

Rear Rim and Center Assembly - For TE20, TEA20, TED20, TEF20, TO20, TO30, TO35, FE35. Size is 10 x 28. Replaces OEM part numbers 897137M92, 1678566M1. (Item #: 178951, Ref: S61968) $657.00

Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Verify measurements before ordering. Replaces: 180876M1, 353427X1. (Item #: 184824, Ref: 350719KIT) $23.00

Rear Spinout Rim Stop - For 90 degree drilled rim rail. For spin out rims with 4 sided rectangle shaped stops. Limited applications, verify style before ordering. Will NOT fit the spinout rims that we offer. Replaces 232274, 1755060M1, 230832, 70230832, 7023227, E5NN1057BA, K917337, T14751 (Item #: 152053, Ref: 1755060M1) $16.20

Rim, 9X28 - This rim is for tractor models TE20, TEA20, TED20, TEF20, TO20, TO30, TO35, FE35. 28 inch diameter and loops are designed for 5/8 inch bolts. . Also replaces OEM number 897137M92, 1882978M92. (Item #: 103780, Ref: NCA1020C) $120.00

Spindle Dust Seal - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 35, 50, 65, 135, 150, 165, 230, 235, 240, 245, Compatible with Massey Ferguson Construction and industrial models 20, 2135, Replaces Massey Ferguson OEM number 180355M2, 180355M1, Upper seal used on spindle upright, (Item #: 158129) $2.50

Spindle Tab Washer - This Tab Washer is used on Massey Ferguson FE35, TEA20, TED20, TEF20, TO20, TO30, TO35, 130, 135, 148, 150, 165, 168, 175, 178, 180, 185, 20, 20B, 20C, 20D, 20E, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 30, 3165, 340, 342, 35, 350, 35X, 360, 375E, 40, 550, 565, 65, 765. Measures 1.50 inches (38.20mm) outside diameter, .775 inch (19.70mm) inside diameter, 0.0625 (1.23mm) inch thick. It replaces original part numbers 957E1195, 81802388, 83910701, 898349M2, 180010M1, 180010M2 (Item #: 173191, Ref: 957E1195) $1.50

No
Picture
Spin-Out Rim Stop - For Massey Ferguson tractor models Super 90, TO35, 35, 50, 65, 135, 150, 165, 175, 180, 240, 282, 290, 298, 390, 398, 399, 670, 690, 698, 1080, 1100, 1130, 2640, 3050, 3060, 3070, 3090, 3630, 3650, 3680, 4225, 4235, 4245, 4255, 4270, 6150, 6170, 6180, 8120, 8140, 8150, 8160, Replaces Massey Ferguson OEM number 3531378M1, (Item #: 174311) $16.60

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 1751403M1. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.60

Wheel Bearing Kit - For tractor models 35, 40, 50, 65, FE35, TE20, TO20, TO30, TO35. Kit contains 1 each: 15123 (Cone), 15245B (Cup), 09067 (Cone), 09195 (Cup), 180008M1 (Seal). Replaces 1810391M91, 835964M91. (Item #: 102486, Ref: WBKMF1) $22.60

Wheel Clamp - Rear wheel clamp for power adjust rear rims.For tractor models 1080, 1100, 1130, 135, 150, 165, 175, 180, 240, 2640, 282, 290UK, 298, 3050, 3060, 3070, 3090, 35, 3630, 3650, 3680, 390, 398, 399, 4225, 4235, 4245, 4255, 4270, 50, 6150, 6170, 6180, 65, 670, 690, 698, 8120, 8140, 8150, 8160, Super 90, TO35. Also replaces p/n 1755057M2, 70235676. (Item #: 124526, Ref: 898021M1) $18.20

Wheel Stud - Stud is 9/16 inch x 2 inch. For 130 French, 135, 135UK, 150, 20, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 240S Turkey, 245, 30, 3165, 35, 35X, 50, TE20, TEA20, TO20, TO30, TO35. Also replaces 185400M1 and 185400M2. (Item #: 151964, Ref: 825507M1) $2.10

Wheel Stud - Front wheel stud. Measures 1.59 inches overall length and .930 threaded length. Threads are 1/2 UNF. These are #5 Steel per OEM specification and may come with a silver steel finish or a gold zinc finish. Fits TE20, TEA20, TO20, TO30, TO35, FE35, F40, 1100, 1130, 130, 135, 150, 165, 175, 180, 202, 203, 204, 2135, 250, 253, 255, 263, 270, 275, 281, 283, 290, 30, 3165, 340, 35, 350, 355, 360, 365, 375, 390, 4225, 4255, 4265, 50, 575, 590, 65, 675, 690, 85. (Item #: 108606, Ref: 181328M1) $1.30

Wheel Stud Nut - Nut is 9/16x18 inches For tractor models 135, 148, 150, 20, 202, 204, 205, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 265, 285, 30, 30D, 3165, 35, 50, 65, F40, FE135, FE35, TO35. May come in a silver metal color or as pictured. (Item #: 126617, Ref: 180004M1) $1.60

Wheel Stud Nut - Nut fits rear wheel stud. 9/16 inch NF. Used with 185400M1 and 185400M2 stud. For 130 French, 135, 135UK, 150, 20, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 240S Turkey, 245, 30, 3165, 35, 35X, 50, TE20, TEA20, TO20, TO30, TO35. May come in a silver metal color or as pictured. (Item #: 126617, Ref: 180004M1) $1.60

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Decals and Emblems

Ferguson Script Decal - 12 inches long, vinyl, blue and white. (Item #: 183045, Ref: R0735) $14.20

Ferguson Script Decal - 19 inches long, vinyl, green and chrome. (Item #: 178283, Ref: R0736) $25.80

Ferguson Script Decal - 26 inches long, vinyl, blue white. (Item #: 183046, Ref: R0737) $36.60

Massey Harris Trademark Decal - Red with yellow letters, 1-1/2 inches on vinyl. (Item #: 183092, Ref: R5190) $3.90

Massey Harris Trademark Decal - Yellow with red letters, 1-1/2 inches on vinyl. (Item #: 183072, Ref: R5191) $3.90

Massey Harris Trademark Decal - Red with yellow letters, 6 inches on vinyl. (Item #: 183101, Ref: R5192) $12.40

Massey Harris Trademark Decal - Yellow with red letters, 3/4 inch on vinyl. (Item #: 183066, Ref: R5236) $2.60

Massey Harris Trademark Decal - Red with yellow letters, 3/4 inch on vinyl. (Item #: 183098, Ref: R5237) $2.60

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Pulley - Pulley, 3-1/8 inch diameter, 5/8 inch shaft bore, 2 grooves for 1/2 inch wide V-belt. (Item #: 179552, Ref: AP3158) $97.00

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Item #: BTW28) $35.98

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

Generator Cutout - Generator cutout for Autolite, 6-volt. For most MH models to 1951. (Item #: 105283, Ref: CB4014) $22.60

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Can fit several applications please verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter Drive - Drive assembly for Delco starters. Fits all MF diesel models Perkins gas models. (Item #: 111105, Ref: 1036519M91) $28.30

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $16.80

Starter Solenoid - Solenoid assembly, saddle mounting to starter. Services most late models, replaces Delco 1115510, on starters 1113139, 1113683, 1113676, others. 12-volt. (Item #: 105672, Ref: 1115510) $30.00

$Ferguson TO35 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $16.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Ferguson TO35 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$Ferguson TO35 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Ferguson TO35 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

$Ferguson TO35 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$Ferguson TO35 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$Ferguson TO35 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.00

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $12.90

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $14.00

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $17.00

Fuel Line Sleeve, Pack of 10 - 7/16 inch outside diameter x 1/4 inch inside diameter x 1/4 inches wide. Replaces 33811113, 3637441M91, 376525X1, 3638466M91 (Item #: 158879, Ref: 376525X1) $4.10

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

$Ferguson TO35 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Throttle Linkage - Universal. Adjustable length ranges from 6 3/8 to 6 5/8. Rod can be cut and either re-bent or re-threaded if a shorter length is required. (Item #: 173108, Ref: 1876343M92) $14.60

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Bracket Stabilizer - Bracket, used with telescoping stabilizer 539881M2TSK. (Item #: 178304, Ref: 514992M2) $46.00

Drawbar - Drawbar, category I, 7/8 inch pins. 11 holes, 26 inch bar length. (Item #: 103174, Ref: 180485M1) $42.10

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

No
Picture
Level Box Assembly - Leveling Box Assembly, standard right hand, category I, 20-1/2" closed, 26" open. Contains fork, shaft, pinion (185220M1-10-1/2"), housing, gear, bearing, handle and hardware. Replaces 677061, 1884760M94. Services all catergory I standard models. (Item #: 110256, Ref: HLBMF61) $70.00

Top Link Assembly, OEM Style - Category 1-1, 17-1/4 inch length of center tube. Verify size before ordering. Replaces 1870075M9. (Item #: 182641, Ref: 184134M91) $90.00

Top Link Assembly, OEM Style - Category 1-1, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 184078M91, 1869954M91. (Item #: 182642, Ref: 1690177M91) $68.00

Top Link Assembly, OEM Style - Category 1-1, 21-1/2 inch length of center tube. Verify size before ordering. (Item #: 182643, Ref: 184361M91) $89.00

Top Link Assembly, OEM Style - Category 1-2, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 3597172M91, 894376M1, 894376M91. (Item #: 182645, Ref: 194376M91) $90.30

Top Link Assembly, OEM Style - Category 1-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 894377M91, 894 377M91, 894377M1 (Item #: 170303, Ref: 894377M1) $90.00

Top Link Assembly, OEM Style - Category 2-2, 18-3/4 inch Length of center tube. (Item #: 182650, Ref: 893438M91) $81.00

Top Link Assembly, OEM Style - Category 2-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 3147681M91, 893439M91. (Item #: 184676, Ref: 1887285M91) $60.00

Top Link, Cat I and Cat II - Top link, 16 inch body combination Category II tractor and Category I implement ends, Adjust 19-1/2 inches to 29-1/2 inches overall. May or may NOT come painted red. (Item #: 112122, Ref: JSA1200R) $29.20

Top Link, Cat II - Top link, 24 inch body, 1 inch Category II ball joints. Adjusts 29 inches to 41 inches. Color varies depending on availability. (Item #: 182649, Ref: JSA2024R) $89.00

Top Link, Cat II, Red - Top link, 20 inch body, 1 inch category II ball joints. Adjusts 25 inches to 37 inches. (Item #: 184552, Ref: 30108E91) $77.00

Top Link, Cat I, Red - Top link, 24 inch body, 3/4 inch category I ball joints. Adjusts 29 inches to 39 inches overall. Painted red. (Item #: 182651, Ref: JSA1024R) $76.00

Top Link, Hydraulic - Category I (3/4 inch), 18.5" inches to 26.0 inches length, 2.00 inch cylinder bore, 9/16 inch UNF port size. (Item #: 183653, Ref: B8106) $257.00

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Clamp, Double Break-Away, Hydraulic - For use with S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this Clamp. (Item #: 112480, Ref: S42-4) $24.60

Coupler Flange - Optional drive flange for L601-9; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch spacing. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b. (Item #: 108772, Ref: L36-6) $64.00

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Selector, isolator assembly - For tractors without individual external hydraulic systems. Three position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms and the rear position will feed power to a 4 way control valve for two way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used. Replace MF cover plate, adds 2 I/O ports 3/8 inch NPT. (Item #: 185644, Ref: TS300) $140.00

Hydraulic Valve Kit, External, Single Spool - Converts tractor for operation of cylinders on pull type implements, front loaders, hydraulic motors, or other optional hydraulics. Single spool, double acting control valve mounts conveniently on flat or shell fenders. Selector/isolator allows operation of single or double acting cylinders. Mounting hardware and instructions included. Kit contains single spool, double acting control valve, isolator valve, valve couplers, clamp hoses, adaptors, hardware and instructions. For tractor models TO35 and later where 182373M1 lift cover plate is accessible. (Item #: 178324, Ref: TS3200M) $872.00

Hydraulic Valve Manifold - This 3 Spool Valve allows operator to use auxiliary hydraulics at the same time without valve switching. Some tractors may need slight modification on seat. Includes 2 elbows. Models from 1960 and later years. (Item #: 173361, Ref: 19833A92) $1159.01

LBP Coupler Center - This LBP Coupler Center Member measures (A) 3-5/8 inch diameter (B) four 5/16 inch holes, 2-1/4 inch spacing. Replaces 1753729M91. (Item #: 178931, Ref: 192169) $75.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

No
Picture
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Valve - Valve for TS3200M. Single spool, 4-way, 3-position, spring loaded to neutral. No relief valve, no power beyond option. In and out ports 3/4 inch, work ports 1/2 inch NPT. (Item #: 183771, Ref: TS200BA) $303.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10

Lights

Headlight Kit, 12 Volt, LH, Chrome Ring - Kit contains 6" steel body, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 186851, Ref: S.43374) $102.00

Headlight Kit, 12 Volt, RH, Chrome Ring - Headlight Kit contains 6" steel, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 187205, Ref: S.22341) $106.00

Headlight Kit, 6 Volt, LH - Headlight assembly includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (LH), Primered. Assembly required. (Item #: S.43370) $98.00

Headlight Kit, 6 Volt, RH - Includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (RH), Primered. Assembly required. (Item #: S.22342) $101.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Item #: 173803, Ref: L408-12V) $38.40

Miscellaneous

Air Cond Comp - New Air conditioning compressor, replacement for Frigidaire A-6 compressor. Includes 5.58" dia. clutch and dust cover, high pressure relief valve. With 12V coil at 10 Oclock, SAE thread. Less superheat switch (comes plugged with non-functional heat switch. For tractors that have air conditioning systems using the Frigidaire A-6 compressor already. (Item #: 109093, Ref: 1904014M92) $430.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $123.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.00

No
Picture
Paint, Dark Gray, 1 Gallon - This Dark Gray was used on Ferguson Implements from 1939 through 1948. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords (1939-1947). Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108333, Ref: TP2888GAL) $57.00

No
Picture
Paint, French Silver Mist Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108364, Ref: TP750GAL) $71.00

No
Picture
Paint, French Silver Mist Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108363, Ref: TP750QT) $27.00

No
Picture
Paint, French Silver Mist Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108362, Ref: TP750SP) $11.40

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.00

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184671, Ref: TP540GAL) $150.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP540QT) $61.00

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108367, Ref: TP235GAL) $90.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108366, Ref: TP235QT) $35.00

No
Picture
Paint, Light Gray, Spray Can - TO35 Sheet Metal 1954-56 and implements after 1954. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108365, Ref: TP235SP) $11.00

No
Picture
Paint, MF Red, 1 Gallon - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102660, Ref: TP300GAL) $53.00

No
Picture
Paint, MF Red, 1 Quart - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102659, Ref: TP300QT) $22.10

No
Picture
Paint, MF Red, Spray Can - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102658, Ref: TP300SP) $7.70

No
Picture
Paint, MH Red, 1 Gallon - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108370, Ref: TP340GAL) $56.00

No
Picture
Paint, MH Red, 1 Quart - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108369, Ref: TP340QT) $24.00

No
Picture
Paint, MH Red, Spray Can - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108368, Ref: TP340SP) $10.20

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Straw Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108373, Ref: TP345GAL) $138.00

No
Picture
Paint, Straw Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP345QT) $61.00

No
Picture
Paint, StrawYellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108371, Ref: TP345SP) $10.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.00

PTO / Driveline

Coupler Repair Kit - Coupler repair kit, services all Hub City over-running couplers. Contains keys, roll pin, set screw, springs, spacer, and retaining ring. (Item #: 182663, Ref: CRK600) $91.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Quick Release Pin - PTO quick release pin fits MOST American yokes. Replaces: 1810351M91, QDK1, QDK1M. (Item #: 112246, Ref: 1810351M91) $5.40

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

No
Picture
Seat Cover (Red and Yellow) - Tie-on for 19 inch wide pan seat. For Tractors that have a Red and Yellow color scheme. (Item #: XYFR30RY) $31.50

Tie-On Seat Cover - Grey, 19 inches wide. Deluxe with 2 inches of foam. This fits a PAN seat. (Item #: 178997, Ref: R2600) $56.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Bumper - Bumper assembly, mounting arms NOT included. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178311, Ref: BU10211R) $134.00

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 183027M91, 509893M91 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $78.00

Rim 10X28 - This rim measures 10 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. May come Painted primer or aluminum or off white color. Replaces 180863M91. (Item #: 103719, Ref: NCA1020B) $132.00

Rim 11X28 with 6 Loop Clamps - This rim is 11 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. Painted aluminum color. Shipped via truck Add $25.00 extra shipping per rim due to weight. Replaces 535450M91. (Item #: 104209, Ref: C5NN1050E) $147.00

Rim, 12X24 - Rim, 12 x 24 demountable rim for 13 x 24 or 14 x 24 tires. Add $52.95 extra shipping due to weight. 6 Loops, these measure 20 1/4 inches center-to-center across from one another. Uses special S.04352 bolt and nut kit. (Item #: 108579, Ref: 535454M91) $140.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $57.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for use with radial tires. (Item #: 183819, Ref: WHS064) $82.00