(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Farmall Tractor Wheel


Click here to see parts by model


Farmall Rear Wheel Clamp
- This rear wheel clamp is for 2 1\2 inch diameter axles. NOT FOR STEEL WHEEL OR CUT DOWN WHEEL APPLICATIONS. Fits cast wheel center part number 6194D. It is for tractor models H, HV, Super H, Super HV, 300 early, for all 6194D rear wheel. (Part No: 6192DBX)
$68.31

Farmall Steering Wheel
- 14-3\4 diameter, 3\4 hub, for keyed shaft. For Cub, A & Super A to SN# 355669, B & C to SN# 75097. Bare Metal Spokes. (Part No: 60069D-OE)
$31.13

Farmall Steering Wheel
- 17-5\8 diameter, 3\4 hub, for keyed shaft. 3 Spoke. Super A SN# 356000 & up, C, Super C, H, Super H, M, Super M, MD, W4, Super W4, W6, Super W6, W9, 100, 130, 200, 230, 240 & 300, 350, 400, 450 without Power Steering. Metal Spokes. Replaces IHS328. (Part No: 60070D-OE)
$30.75

Farmall Steering Wheel, 11\16
- For Late 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 460, 560, 4100, 4166, 4186. Steering Wheel - 18 Diameter, 11\16 Splined Hub. Replaces OEM # 366557R1. (Part No: R3217)
$42.12

Farmall Steering Wheel
- For M, MD, W9, WD9, WR9, 400, 450, 600, 650. Steering Wheel - 20 Diameter, 3\4 Keyed Hub, 4 Spokes. (Part No: 557282R91)
$35.03

Farmall Steering Wheel
- With 7\8 inch Splined Hub. For tractor models 140, 350, 404, 424 without PS, 444 without PS, 450, W450, 460, 504, 560, 2404, 2424 without power steering, 2444 without power steering, 4100, 4156, 4166, 4186, Combines: 105, 203, 205 to SN# 1289. Steering Wheel 17 3\8 diameter, 7\8 hub, for splined shaft. Does not come with center cap. (Part No: 366557R2)
$35.25

Farmall Front Wheel Bearing Kit
- For tractor models Cub, Lo-Boy. Bearing kit for front wheel tractor, contains (15580) inner cone, (15520) inner cup, (17580) outer cone, (17520) outer cup, (350768R1) felt washer. Complete kit for 1 wheel. (Part No: FW116FS)
$100.12

Farmall Wheel Bearing Kit, Wide Axle Assembly
- For tractor models H, HV, M, MD, MF, SMD, Super H, Super HV, SW, W4, 300, 350, 330. This is a complete front axle kit for one wheel used on wide axle assembly (only). Contains: 14138A(Cone), 14274(Cup), 1779(Cone), 43828D (Gasket), 704083R1(Seal), 48548D(Seal Retainer), 1729(Cup). Inner bearing I.D. is 1.37 , O.D. 2.71 . Outer bearing I.D. is 0.93 , O.D. 2.23 , Seal I.D. is 1.74 , O.D. 2.83 . (Part No: WBKIH4)
$32.78

No
Picture
Farmall Wheel Bearing Kit
- For tractor models B414, 2300A, 354, 364, 384, B275(Early SN# models). Contains: LM48548(Cone), LM48510(Cup), 1988(Cone), 1922(Cup), 175272(Seal), 48548D(Sleeve). (Part No: WBKIH5)
$42.26

Farmall Wheel Bearing Kit
- For tractor models A, AI, B, C, Super A, 100, 130, 200, 230, 140 with Cast wheels, (AV, AV1 ALL with Fixed or ADJ. Front). Parts include OEM numbers: 15118(Cone), 15250B(Cup), 09074(Cone), 09196(Cup), 49118DA(Felt Seal), 55453D(Felt Seal), 49117D(Seal Retainer), 43463D(Seal). (Part No: WBKIH10)
$35.29

No
Picture
Farmall Wheel Bearing Kit
- For tractor models Cub, Cub Lo-Boy. Contains: BEARING 15580B, BEARING 15520B, BEARING 17580, BEARING 17520B, SEAL 350768R1, WEAR SEAL 351076R1. This is a wheel bearing kit for one wheel. NOTE: Does NOT come with seal number 350769R1. Available at an additional cost. (Part No: WBKIH11)
$57.33

Farmall Ring Gear,Flywheel
- For tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 240. This Gear has 90 teeth, 11.435 O.D., .50 wide. (Part No: 55755DB)
$35.12

Farmall Ring Gear Flywheel
- For tractor models H, Super H, Super W4, 300, 330, 340, 350. This flywheel has 104 teeth, 13.165 inches O.D., 12 inches I.D., .550 inches wide (Part No: 45638DB)
$50.14

Farmall Ring Gear, Flywheel
- For tractor models M, MD, 0DS6, Super M, Super MD, Super W6, WD6, W400, W450, W6, 400, 450, (560, 660 ALL DSL ONLY). This ring gear has 125 teeth, 15.72 O.D., .80 wide. (Part No: 266142R1)
$75.90

No
Picture
Farmall Front Wheel Hub-6 Bolt
- NOTE : This hub allows changing old style IH narrow front cast whl & hub to a standard 6 bolt. Hub uses standard wheel bearings & seals. Fits tractor models 400, M, and Super M. (Part No: 223311)
$130.63

Farmall Flywheel
- With Ring Gear For 574, 584, 595, 674, 684, 784, 884 with D239 Engine & 11 Clutch (Part No: R2921)
$715.70

No
Picture
Farmall Flywheel
- With Ring Gear For 584, 585, 595, 595XL, 684, 685, 685XL, 695, 695XL, 784 with D239 Engine & 12 Clutch (Part No: R2922)
$766.42

No
Picture
Farmall Flywheel
- With Ring Gear For 656 with D282 Engine. Replaces OEM # 388302R21. (Part No: R2923)
$984.60

No
Picture
Farmall Flywheel
- With Ring Gear For 806, 856, 1026, 2856, 21026 with D407 Engine & 12 Clutch (Part No: R2321)
$634.38

No
Picture
Farmall Flywheel
- With Ring Gear For 1066, 1086, 1466, 1486, 1566, 1586, 3688, 4166, 4186, 6388 with 414, 436, or 466 Engine s & 14 Clutch (Part No: R2322)
$601.84

No
Picture
Farmall Flywheel
- With Ring Gear For 3388, 3588, 3788, 6388, 6588, 6788 (Part No: R2924)
$691.30

No
Picture
Farmall Wheel Hub
- 6 bolt. For tractor models 544, 560, 656, 666, 686, 706, 766. (Part No: R2312)
$81.51

No
Picture
Farmall Wheel Wedge Kit
- For 3.5 inch Axle For 1086, 1456, 1466, 1486. Includes 2 wedges and 1 bolt. (Part No: 1287802C92)
$146.40

No
Picture
Farmall Front Wheel Nut & Bolt Set - Set of 10
- Front Wheel Bolt Set for 186 Hydro, 230, 235, 255, 400, 544, 560, 656, 666, 686, 70 Hydro, 706, 756, 766, 770, 786, 806, 815, 826, 84 Hydro, 856, 86, 880, 886, 915, 966, 986, M, Super M. Front Wheel Nut & Bolt Set of 10. Bolts are 9\16 Inches x 1 1\2 inches. Zinc Plated Nuts. (Part No: WB916-bolt_nuts)
$42.75

Farmall Steering Wheel
- 16 In. diameter. Mounts on 13\16 (36 spline) shaft. For the following tractors WITH POWER STEERING : HYDRO 70, HYDRO 84, HYDRO 86, HYDRO 100, HYDRO 186, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 4386, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788. Replaces IHS542. Cap is available separately as part number 68837C3. Specify in COMMENTS if needed. (Part No: 385156R1)
$37.34

Farmall Wheel Rim 7X24
- This 4 bolt rim is 7 wide, 24 diameter with four mounting clamps. This uses 4 1\2 inch mounting bolts. The mounting holes measure 14 1\2 inches center to center. For single rear wheels with 7-24, 8.3\8-24 or 9.5\9- 24 tires. Tractors: Cub, Cub Lo-Boy. For Cub, Cub Lo-Boy. Additional $15.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 114717C1)
$120.92

Farmall Front Wheel Bearing Kit
- Bearing kit, for front wheel, Contains Bearing LM603049-BP, Bearing Cup LM603011-BP, Bearing LM48548-BP , Bearing Cup LM48510-BP, Wear Sleeve 48703D-BP Hub Cap Gasket 369860R1 Lip Type Seal 22322-BP. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2544, 2608, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488. (Part No: 371418R91)
$30.33

Farmall Front Wheel Bearing
- Bearing kit, for front wheel, contains Inner cone, inner cup, outer cone, outer cup, oil seal. Tractors 140, 240, 330, 340, F504, dual wheel. For 140, 240, 330, 340, 504 (Part No: FW105S)
$23.16

Farmall Front Wheel Bearing Kit
- Kit contains one each: 342S(Cone), 332(Cup), 2878(Cone), 2820(Cup), 48704DA(Seal), 15288A(Felt Seal). Repairs one wheel. For 400, 450, HV, MDV, MV, O6, ODS6, Super HV, Super MDV, Super MV, Super W6, Super WD6, W6, WD6 (Part No: FW112FS)
$154.56

No
Picture
Farmall Front Wheel Bearing
- Bearing kit, for front wheel, contains inner cone, inner cup, outer cone, outer cup, oil seal. For tractor models 460 except hi-clear, International 504, 606 & 2606 Std. front axle. (Part No: FW119FS)
$26.73

Farmall Front Wheel Bearing
- Bearing kit for front wheel, contains inner cone, inner cup, outer cone, outer cup, oil seal. For tractors 460 hi-clear, 560, 606, 2504, 2606 H.D. front axle, 706, 806, 2706, 2806. For 2504, 2606, 2706, 2806, 460, 560, 606, 706, 806 (Part No: FW120FS)
$30.53

No
Picture
Farmall Wheel Bearing Kit
- Timken wheel bearing kit, for front wheels. Kit is packaged in a Timken box with the application and TImken bearing numbers listed on the label. (1) 48703D retainer (1) 370254R91 oil seal (1) 369860R1 gasket (1) LM48510-TIM bearing cup (1) LM48548-TIM bearing cone (1) LM603011-TIM bearing cup (1) LM603049-TIM bearing cone. On tractors with adjustable axle. For 460, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Part No: TKR7)
$47.42

No
Picture
Farmall Wheel Hub Ball Bearing
- Ball bearing, for wheel hub. Planters: 56, 58, 66, 400 & 500 Cyclo, 600. Mfr. # 204KRNP2, For Planters: 56, 58, 66, 400 & 500 Cyclo, 600. (Part No: 465003R91)
$10.56

Farmall Steering Wheel Cap
- For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 186, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 404, 424, 4386, 444, 454, 4586, 464, 4786, 484, 504, 5088, 5288, 544, 5488, 574, 584, 606, 6388, 656, 6588, 664, 666, 674, 6788, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86. (Part No: 68837C3)
$11.25

Farmall Wheel Bearing Kit
- Kit include the OEM numbers: LM67048(Cone), LM7010(Cup), LM11910(Cup), LM11949(Cone), 49116D(Gasket), 172532(Seal), 49117D(Wear Sleeve). For 140, 200, 230, 240, 2404, 2424, 2444, 2504, 330, 340, 404, 424, 444. (Part No: WBKIH1)
$23.91

Farmall Steering Wheel Cap
- For tractor models 404, 504, 606, 706, 806, 56, early 66. Power Steering . (Part No: 378395R1)
$64.50

Farmall Front Wheel Hub, 6 Bolt
- For tractor models 460, 504, 544, 656, 666, 686, Hydro 70, Hydro 86. Hub uses #WBKIH2 wheel bearing kit. (Part No: 395310R11)
$153.10

Farmall Front Wheel Hub, 6 Bolt
- For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3688, 5088, 5288, 544, 5488, 560, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 100, Hydrp 186, Hydro 70, Hydro 86. Hub uses #WBKIH3 wheel bearing kit. Replaces: 370256R11, 370256R21, 391823R11 (Part No: 391823R11)
$87.09

Farmall Bearing Cone, Wheel
- For tractor models 100, 130, (140 with cast wheels), 200, 230, A, A1, (AV, AV1, with fixed or adj. wheels), B, C, Super A. (Part No: 09074)
$9.09

No
Picture
Farmall Wheel Bearing Kit
- Complete for one wheel. For tractor models 574, 584, 585, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 884, 885, 885XL, 895, 895XL, Hydro 84. Kit contains:LM102949(Cone), LM102910(Cup), L68149(Cone), L68111(Cup), 22322(Lip Seal), 67328C1(Retainer). (Part No: WBKIH9)
$26.81

Farmall Wheel Bearing Kit
- For tractor models 674, 684, 884, Hydro 84. (Part No: R2945)
$41.48

Farmall Wheel Bearing Kit
- For tractor models 2400A, 2500A, 380B, 385, 395, 454, 484, 495, 574, 584, 585, 595, 595XL, 674, 685, 685XL, 695, 695XL, 784. Kit contains: LM48548(Cone), LM48510(Cup), M12649(Cone), M12610(Cup), 530104R91(Seal), 406295R1(Retainer-NOT SHOWN). (Part No: WBKIH6)
$30.19

Farmall Front Wheel Hub, 6 Bolt
- For tractor models 2400A, 2500A, 380B, 385, 395, 454, 484, 485, 495, 574, 584, 585, 595, 595XL, 674, 685, 685XL, 695, 695XL, 885, 895, 995. Note: hub uses WBKIH6 wheel bearing kit. (Part No: 406294R21)
$159.67

No
Picture
Farmall Steering Wheel
- 16 diameter, 3\4 -7\8 keyed, 3 steel spokes. Replaces OEM# AA380R. For model (B SN# 96000-230043). (Part No: S.67521)
$40.48

Farmall Steering Wheel Cap, Models with Power Steering
- Has IH logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Part No: 366566R1)
$62.79

Farmall Front Wheel Hub, 8 Bolt
- For tractor models 1026, 766, 966, 1066, 1466, 754, 2756, 826, 2826, 856, 2856, 1586, 786, 886, 986, 1086, 1486, 1566, 1568, 3088, 3288, 3688, 5088, 5288, 5488, 666, 815, 1206, 1246, 1468, 706, 2706, 806, 2806, 685, 915. Replaces 1323559C1. Does not come with bearings. (Part No: 391824R11)
$89.63

Farmall Steering Wheel Cap
- For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 186, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 404, 424, 4386, 444, 454, 4586, 464, 4786, 484, 504, 5088, 5288, 544, 5488, 574, 584, 606, 6388, 656, 6588, 664, 666, 674, 6788, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86. (Part No: 68837C3)
$11.25

No
Picture
Farmall Wheel Bearing Kit
- Kit contains 1 LM48548 bearing, 1 LM48510 bearing cup, 1 M12649 bearing, 1 M12610 bearing, 1 369860R1 hub cap gasket, 1 175272 seal, 1 48548D wear sleeve. For tractor models 2606, 460, 504, 544, 606, 656. (Part No: WBKIH2)
$24.50

No
Picture
Farmall Wheel Bearing Kit
- Kit includes 1 LM603049 bearing, 1 LM603011 bearing cup, 1 LM48548 bearing, 1 LM48510 bearing cup, 1 48703D wear sleeve, 1 369860R1 hub cap gasket, 1 22322 seal, lip type. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 1822, 1844, 2022, 2044, 21026, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3688, 5088, 5288, 544, 5488, 560, 656, 666, 686, 706, 756, 766, 782, 786, 826, 826, 856, 886, 966, 986, Hydro 100, Hydro 186, Hydro 3488, Hydro 70, Hydro 86. (Part No: WBKIH3)
$26.99

No
Picture
Farmall Wheel Bearing Kit
- Kit contains 1 of each of the following bearing LM67048, bearing LM67010, bearing LM11949, bearing cup LM11910, seal 530103R91, seal retainer ring 406293R1. For tractor models 454, 574, 584, 674, 2400A. (Part No: WBKIH7)
$18.55

No
Picture
Farmall Wheel Bearing Kit
- Kit contains 1 of each of the following L68149 bearing, L68111 bearing, LM12749 bearing, LM12711 bearing, 530103R91 seal, 406293R1 seal retainer ring. For tractor models (2400A, 484 std duty axle), 454, 464, (574 straight axle). (Part No: WBKIH8)
$25.08

Farmall Front Wheel Hub, Heavy Duty
- 6 bolt. For tractor models 268, 278, 3230, 4210, 4230, 4240, 584, 585, 595, 595XL, 684, 685, 685XL, 695, 695XL, 784, 785, 884, 885, 885XL, 895, 895XL, 995, C100, C70, C80, C90, CX100, CX70, CX80, CX90, Hydro 84. (Part No: 67527C91)
$97.33

Farmall Flywheel Ring Gear
- 132 teeth, 16.680 O.D., 15.485 I.D., .610 wide. For tractor models (1026 diesel), (1066 hydro or diesel), (21026, 2826, 2856, 3088, 3288 diesel), (3488, 3688 hydro, diesel), (706, 756, 766, 786 diesel), (806 with D361), (826, 856, 886, 966, 986, Hydro 100, Hydro 186 diesel). (Part No: 341604R1)
$59.15

Farmall Rear Wheel Wedge Kit
- 3.250 includes 2 wedges and 1 bolt. For tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 856, 966, 986, 1026, 1066, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788. Wedges NOT sold seperately. (Part No: 1287801C91)
$177.31

Farmall Steering Wheel
- 16 dia, 3\4 keyed hub, 3 covered spokes. For tractor models (F12, F14, F20, F30, A, B, H, M all early from 1937-1940). (Part No: 29118DC)
$62.44

Farmall Steering Wheel
- 13 diameter, 11\16 splined hub, 3 covered spokes. For tractor models Cub Cadet 100, Cub Cadet 102, Cub Cadet 122, Cub Cadet 123. (Part No: 385734R1)
$54.51

Farmall Steering Wheel Boot
- Rubber cover for Orbit motor. For tractor models 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 4156, 4166, 4186, Hydro 70, Hydro 86, Hydro 100. Replaces IHS682. (Part No: 382587R1)
$16.28

Farmall Ring Gear, Flywheel
- Has 133 teeth. Fits tractors: HYDRO 70 (with C-291, D-312 Engines), HYDRO 86 (with C-291, D-310, D-312 Engines), 504 (Gear & Hydro Drive with D-188 Engine SN# 13676->), 544 (with C-200 Engine), 656 (Gear & Hydro Drive with C-263 Eng. \ Hydro Drive with D-282 Engine, 666 (Gear & Hydro Drive with C-291 Eng. \ Hydro Drive with D-312 Engine, 686 (Gear Drive with C-291 Engine).INDUSTRIAL\CONSTRUCTION: 2504 (Gear & Hydro Drive with D-188 Engine 2544 (with C-200 Engine), 3500A (with C-200 Engine), 3514 (Gear & Hydro Drive with D-188 Engine, 3514 (with Synchromesh Trans. with C-175 Engine), 3514 (without Hydra-Shuttle Trans. with C-153 Engine, 8000 (Forklift with C-200 Engine). Measures 12 5\16 inch inside diameter and .485 inch width. (Part No: 396421R1)
$57.90

Farmall Steering Wheel Cap, Models without Power Steering
- Has IH logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Part No: 366558R1)
$32.76

Farmall FLYWHEEL
- NEW flywheel assembly with ring gear. 12 diameter. Tractors: 574, 584, 585, 595, 684, 685, 695, 784, Hydro 84, 3230, 4210. Weight: 88.5 pounds. Additional $20 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 1808412C92)
$780.64

No
Picture
Farmall Steering Wheel
- Tilt type 36 spline, 7\8 shaft, 3 covered spokes. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. Uses cap 400220R1. (Part No: 400217R1)
$55.97

Farmall Steering Wheel Cap
- Use with steering wheel 400217R1. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. Gasket available as p\n 402434R1. (Part No: 400220R1)
$101.80

No
Picture
Farmall Steering Wheel Cap Gasket
- Use with steering wheel cap 400220R1. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. (Part No: 402434R1)
$13.97

No
Picture
Farmall Steering Wheel Release Lever, Tilt
- For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. (Part No: 400214R21)
$23.10

No
Picture
Farmall Steering Wheel Release Lever Knob
- Use with 400214R21 release lever. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. (Part No: R5148)
$23.10

Farmall Steering Wheel
- 15-1\4 diameter, 36 spline, 13\16 shaft, 3 covered spokes. For tractor models 2294, 2394, 2594, 3294, 3394, 3594, (7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950 all with standard steering column). Replaces A164267, A61007, A65544. (Part No: A61007)
$55.97

Farmall Front Wheel Bearing Kit
- Bearing kit, for front wheel, Contains Bearing LM603049-BP, Bearing Cup LM603011-BP, Bearing LM48548-BP , Bearing Cup LM48510-BP, Wear Sleeve 48703D-BP Hub Cap Gasket 369860R1 Lip Type Seal 22322-BP. For tractor models 3688, 460, 504, 5088, 5288, 544, 5488, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Part No: 371418R91)
$30.33

Farmall Steering Wheel
- Restoration quality steering wheel for Cub Cadet 70, 71, 72, 73, 100(->SN 400000). 13 Inch O.D. 11\16 inch hub with 40 splines. (Part No: 376176R1)
$40.42

Farmall Tail Wheel Assembly
- 6 inch x 9 inch tail wheel assembly with laminated tire, less hub. 4 inch pilot, 5 bolt holes, 5-1\2 inch bolt circle. 5-1\4 inches wide, 21 inch outside diameter, 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)
$124.93

Farmall Tail Wheel Assembly
- 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5\8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3\4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Part No: 500BH)
$44.31

Farmall Steering Wheel Spinner, Bare Aluminum
- Comes with mounting hardware. (Part No: R3275)
$7.12

Farmall Steering Wheel Spinner, Black
- Comes with mounting hardware. (Part No: R3276)
$6.60

Farmall Steering Wheel Spinner, Red
- Comes with mounting hardware. (Part No: R3277)
$7.20

Farmall Steering Wheel Spinner, Green
- Comes with mounting hardware. (Part No: R3278)
$7.20

Farmall Steering Wheel Spinner, Blue
- Comes with mounting hardware. (Part No: R3279)
$7.20

Farmall Steering Wheel Spinner, Yellow
- Comes with mounting hardware. (Part No: R3280)
$7.20

Farmall Steering Wheel Spinner, Orange
- Comes with mounting hardware. (Part No: R6323)
$6.69

Farmall PTO Pressure Plate Flywheel, 2 Piece Kit
- For tractor models Cub 154 Lo-Boy, Cub 185 Lo-Boy. Replaces: 527244R1 (Part No: 527244R1)
$32.45

Farmall Ring Gear, Flywheel
- 84 teeth, 8.696 Inside diameter and 10.678 Outside diameter. For tractor models Cub, (184 Baler), 55T, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. (Part No: 251270R2)
$55.20

Farmall Steering Wheel Shaft Worm Oil Seal
- This steering wheel Shaft Worm Oil Seal measures 1.000 inside diameter, 1.624 outside diameter and has a .250 width. Used on A, AV, Super A, Super A-1, Super AV, Super AV-1, 100, 130, 140 all with Long Steering Wheel Shaft. Replaces: 358229R91, 358782R91, 358821R91, 383332R91, 48956D (Part No: 48956D)
$12.95

Farmall Wheel 12X28
- Power Adjust Rim, 12 inches x 28 inches, 4 rail type. For Double Ramp Clamp. Holes in rail for Stop Body Screw are drilled parallel to axle (not at angle). For tractors: 424, 434, 444, 454, 464, 484, 574, 584, 606, 674, 684, 784, 884 and others using 12 inches x 28 inches 4 rail spin out rims. International Utility: 300, 330, 340, 350, 404, 460, 504 and others using 12 inches x 28 inches 4 rail spin out rims. Replaces: 365324R92. (Part No: 1687615M91)
$417.31

Farmall Wheel Bolt
- This wheel bolt fits the following tractor models: A, B, BN, Super A, 100, 130, 140 , B-250, B-275, B-414, 1026, 1066, 1086, 1206, 1256, 140, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 240, 2404, 2424, 2444, 3088, 3288, 330, 340, 354, 364, 384, 404, 424, 444, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 444, Hydro 100, Hydro 186, Hydro 70, Hydro 86, 240, 2404, 300, 330, 340, 3444, 350, 364, 384, 404, 424, 454, 460, 464, 484, 574, 584, 606, 674, 684, 784, 884, B-250, B-275, B-414, 300, 350, 354. It has an overall length of 1.81 inches, a thread size of 9\16 18 UNF, and thread length of 1.12 inches. Replaces part number 51485D. (Part No: WB916)
$1.43

Farmall Wheel Bolt
- This wheel bolt fits the following tractor models: A, B, BN, Super A, 100, 130, 140 , B-250, B-275, B-414, 1026, 1066, 1086, 1206, 1256, 140, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 240, 2404, 2424, 2444, 3088, 3288, 330, 340, 354, 364, 384, 404, 424, 444, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 444, Hydro 100, Hydro 186, Hydro 70, Hydro 86, 240, 2404, 300, 330, 340, 3444, 350, 364, 384, 404, 424, 454, 460, 464, 484, 574, 584, 606, 674, 684, 784, 884, B-250, B-275, B-414, 300, 350, and 354. It has an overall length of 1.81 inches, a thread size of 9\16 18 UNF, and thread length of 1.12 inches. Replaces part number 51485D. (Part No: WB916)
$1.43

Farmall Steering Wheel Nut
- This steering wheel nut fits the following tractor models: Cub Cadet 100, Cub Cadet 102, Cub Cadet 122, Cub Cadet 70, A, AV, AV1, B, BN, C, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDVTA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, Super WD6, Super WD6TA, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 200, 230, 600, 650, Cub Lo-Boy, 300, 400, 450, and Cub. It measures 0.075 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 114499, 122403, and 219753. (Part No: 353435X1)
$0.44

Farmall Steering Wheel Nut
- This steering wheel nut fits the following tractor models: Cub Cadet 100, Cub Cadet 102, Cub Cadet 122, Cub Cadet 70, A, AV, AV1, B, BN, C, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDVTA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, Super WD6, Super WD6TA, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 200, 230, 600, 650, Cub Lo-Boy, 300, 400, 450, and Cub. It measures 0.075 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 114499, 122403, and 219753. (Part No: 353435X1)
$0.44

Farmall Steering Wheel
- This Steering Wheel is For single keyed shaft. Tapered hub .707 inch to .775 inch, .191 inch keyway width. (Part No: 708424R91)
$29.85


Click here to see parts by model







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2015 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.