(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Farmall Tractor Steering


Click here to see parts by model


Farmall Power Steering Pump Pulley
- This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1\8 inch keyway, 0.9715 inch total width for 1\2 inch belt. (Part No: ABC1417)
$37.45

Farmall Steering Wheel
- 14-3\4 diameter, 3\4 hub, for keyed shaft. For Cub, A & Super A to SN# 355669, B & C to SN# 75097. Bare Metal Spokes. (Part No: 60069D-OE)
$31.13

Farmall Steering Wheel
- 17-5\8 diameter, 3\4 hub, for keyed shaft. 3 Spoke. Super A SN# 356000 & up, C, Super C, H, Super H, M, Super M, MD, W4, Super W4, W6, Super W6, W9, 100, 130, 200, 230, 240 & 300, 350, 400, 450 without Power Steering. Metal Spokes. Replaces IHS328. (Part No: 60070D-OE)
$30.75

Farmall Steering Wheel, 11\16
- For Late 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 460, 560, 4100, 4166, 4186. Steering Wheel - 18 Diameter, 11\16 Splined Hub. Replaces OEM # 366557R1. (Part No: R3217)
$42.12

Farmall Steering Wheel
- For M, MD, W9, WD9, WR9, 400, 450, 600, 650. Steering Wheel - 20 Diameter, 3\4 Keyed Hub, 4 Spokes. (Part No: 557282R91)
$35.03

Farmall Steering Shaft
- For H, HV, Super H, Super HV, Farmall 300, 350. (Part No: 50047DB)
$129.72

Farmall Steering Worm Gear
- For H, HV, Super H, Super HV, Farmall 300, 350. This 32 teeth gear mates with the bottom of the steering shaft. Can use 50038DA with 19 teeth also. (Part No: 50038DB)
$149.41

Farmall Steering Wheel
- With 7\8 inch Splined Hub. For tractor models 140, 350, 404, 424 without PS, 444 without PS, 450, W450, 460, 504, 560, 2404, 2424 without power steering, 2444 without power steering, 4100, 4156, 4166, 4186, Combines: 105, 203, 205 to SN# 1289. Steering Wheel 17 3\8 diameter, 7\8 hub, for splined shaft. Does not come with center cap. (Part No: 366557R2)
$35.25

Farmall Power Steering Cylinder End
- For 766, 966, 1066, 1466, 1468, 1566, 1568. Power Steering Cylinder End.) (Part No: 533287R2)
$44.93

Farmall Power Steering Cylinder End
- For tractor models 666, 686, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3688, 5088, 5288, 5488, Hydro 100, Hydro 186. Power Steering Cylinder End. (Part No: 71820C91)
$64.58

Farmall Power Steering Sheave
- For model M with Char-Lynn Power Steering Pump. (Part No: R3665)
$77.56

Farmall Spindle & Steering Arm Set Left or Right Hand - Splined Style
- Spindle & Steering Arm Set Left or Right Hand. 12.750 Keyed Upright Shaft Measurements on Inner Brg - 1.780 Outer Brg - 1.375. Use R2945 Wheel Bearing Kit. For tractor models 656, 666, 686, 756, 766, 786, 826, 856, 886, 896, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3688, 5088, 5288, 5488, Hydro 70, Hydro 86, Hydro 100, Hydro 186, Hydro 3488. (Part No: R2938)
$255.61

Farmall Steering Arm
- Center. For tractor models 424, 444, 504, 544, 606, 656, 2424, 2444, 2504, 2544, 2606, 2656. (Part No: 379553R11)
$180.38

Farmall Steering Arm
- Center. For tractor models 504, 544, 606, 656, 2504, 2544, 2606, 2656. (Part No: R2948)
$153.91

Farmall Steering Arm
- Center For 544, 560, 656, 666, 686, 706, 756, 806, 826, 856, 1026, 1206, 1256 (Part No: 358970R1)
$139.13

Farmall Steering Arm
- Left Hand - 4.25 Spline For 504, 544, 606, 656. Replaces OEM# 379642R1. (Part No: R0262)
$212.19

Farmall Steering Arm
- Right Hand - 4.25 Spline. For tractor models 504, 544, 606, 656. (Part No: R0263)
$208.82

Farmall Steering Arm
- Left or Right Hand - Keyed. For tractor models 544, 656, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456. (Part No: R2949)
$182.53

No
Picture
Farmall Steering Arm
- Left Hand - 2 Spline. For tractor models 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456. (Part No: R0264)
$173.69

Farmall Steering Arm
- Right Hand - 2 Spline. For tractor models 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456. (Part No: R0265)
$176.78

Farmall Steering Arm
- Right Hand Use with OEM Style Spindle. For tractor models 766, 786, 866, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, Hydro 186. (Part No: R2307)
$59.40

Farmall Steering Arm
- Left Hand Use with OEM Style Spindle. For tractor models 766, 786, 866, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, Hydro 186. (Part No: R2308)
$59.40

Farmall Steering Wheel
- 16 In. diameter. Mounts on 13\16 (36 spline) shaft. For the following tractors WITH POWER STEERING : HYDRO 70, HYDRO 84, HYDRO 86, HYDRO 100, HYDRO 186, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 4386, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788. Replaces IHS542. Cap is available separately as part number 68837C3. Specify in COMMENTS if needed. (Part No: 385156R1)
$37.34

Farmall Steering Arm
- STEERING ARM, Left Hand Splined. For 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 756, 766, 786, 856, 886, 966, 986, HYDRO 100 (Part No: 531248R2)
$61.88

Farmall Steering Arm
- Right Hand Splined. For tractor models 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 756, 766, 786, 856, 886, 966, 986, HYDRO 100. (Part No: 531249R2)
$41.33

Farmall Steering Wheel Cap
- For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 186, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 404, 424, 4386, 444, 454, 4586, 464, 4786, 484, 504, 5088, 5288, 544, 5488, 574, 584, 606, 6388, 656, 6588, 664, 666, 674, 6788, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86. (Part No: 68837C3)
$11.25

Farmall Steering Sector Gear
- For tractor models Super A, 100, 130, 140. 9 Tooth Worm Gear 1\4 inch Keyway. Use with 70890C1 Shaft. (Part No: 70888C1)
$143.02

Farmall Steering Sector Shaft
- For tractor models Super A, 100, 130, 140. Shaft for 9 Tooth Worm Gear #70888C1. Tapered shaft nut available as P\N 359040R1. (Part No: 70890C1)
$89.01

Farmall Steering Arm
- Fits Models, 2504, 2544, 2606, 2656, 504, 544, 606, 656. (Bushings NOT included: Please order 379554R1 & 379748R1 bushings if needed.) (Part No: 379555R11)
$156.73

Farmall Power Steering, Pulley
- For model M. (Part No: 5515PL)
$51.23

Farmall Steering Worm Gear, Sector
- 32 Teeth, For tractor models 400, 450, M, Super M, Super MTA.The style of this gear is full circle. This gear has 32 teeth. It can also replace a 19 tooth sector (1\2 moon style). Replaces: 50037DA, 50037DB, 704168R1. (Part No: 50037DB)
$144.83

Farmall Steering Wheel Cap
- For tractor models 404, 504, 606, 706, 806, 56, early 66. Power Steering . (Part No: 378395R1)
$64.50

Farmall Steering Support Housing, (RH)
- For tractor models 2544, 2656, 544, 656, 666, 686. (Part No: 388737R1)
$93.00

Farmall Steering Support Housing, (LH)
- For tractor models 2544, 2656, 544, 656, 666, 686. (Part No: 388736R1)
$104.33

Farmall Seal Kit, Power Steering Cylinder
- For 2 wheel drive models 454, 464, 574, 674, 484, 584, 684, 784, 884, 385, 485, 585, 685, 885, 595, 695, 995, 2400, C50, C60, C80, C90, C100, 4210, 4230, 4240. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Part No: 55355C91)
$43.75

No
Picture
Farmall Steering Wheel
- 16 diameter, 3\4 -7\8 keyed, 3 steel spokes. Replaces OEM# AA380R. For model (B SN# 96000-230043). (Part No: S.67521)
$40.48

Farmall Power Steering Pump
- For tractor models 330, 340, 460, 560, 660. (Part No: 371135R92)
$409.60

Farmall Steering Wheel Cap, Models with Power Steering
- Has IH logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Part No: 366566R1)
$62.79

Farmall Steering Shaft Support Knuckle
- For tractor models Cub, Cub Lo-Boy. (Part No: 350902R3)
$32.43

Farmall Power Steering Pump
- Power Steering Pump. For tractor models IH 2300A, 364, 384, 444, B414. (Part No: 3063911R93)
$793.96

Farmall Steering Wheel Cap
- For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 186, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 404, 424, 4386, 444, 454, 4586, 464, 4786, 484, 504, 5088, 5288, 544, 5488, 574, 584, 606, 6388, 656, 6588, 664, 666, 674, 6788, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86. (Part No: 68837C3)
$11.25

Farmall Power Steering Cylinder
- Complete cylinder with 1 dia. shaft. Includes 549670R2 Clevis. For tractor models 385, 454, 464, 474, 485, 574, 584, 585, 674, 684, 685, 784, 884, 885, 2400, 2500. Replaces 549667R91, 549667R93. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Part No: 188842A1)
$399.66

Farmall Steering Arm, Center
- For tractor models Hydro 100, Hydro 186, 766, 786, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488. Replaces 531235R11. (Part No: 71787C91)
$297.98

Farmall Steering Wheel
- 16 dia, 3\4 keyed hub, 3 covered spokes. For tractor models (F12, F14, F20, F30, A, B, H, M all early from 1937-1940). (Part No: 29118DC)
$62.44

Farmall Steering Wheel
- 13 diameter, 11\16 splined hub, 3 covered spokes. For tractor models Cub Cadet 100, Cub Cadet 102, Cub Cadet 122, Cub Cadet 123. (Part No: 385734R1)
$54.51

Farmall Steering Shaft, Hydrostatic Motor
- 9 overall length. For tractor models 385, 484, 485, 584, (585 less cab up to SN# 18001 with heavy duty front axle), (684 with heavy duty front cast axle), (685, 885 less cab), 784, 884, 380B. (Part No: 3121187R91)
$50.70

Farmall Steering Motor, Hydrostatic
- No relief valve. For tractor models (385, 484, 485, 585 up to SN# 18001), 684, 685, 784, 884, 885, 380B. (Part No: 67698C93)
$477.41

Farmall Steering Motor, Hydrostatic
- With relief valve. For tractor models (385, 485, 585 SN# 18001 and up), 380B, 3220, 3230, 4210, 4230, 4240, C50, C80, C90, C100. Replaces 88107C91, 88107C92, 88107C93. (Part No: 88107C93)
$481.62

Farmall Steering Wheel Boot
- Rubber cover for Orbit motor. For tractor models 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 4156, 4166, 4186, Hydro 70, Hydro 86, Hydro 100. Replaces IHS682. (Part No: 382587R1)
$16.28

Farmall Steering Box Assembly
- This steering box assembly is for tractor models B250, B275, B414. Replaces 708600R1. This assembly uses steering wheel part number R2090 or 2N3600 which both are available on our web page. (Part No: 3070228R92)
$302.08

Farmall Steering Wheel Cap, Models without Power Steering
- Has IH logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Part No: 366558R1)
$32.76

Farmall Power Steering Clevis End
- Fits cylinder 188842A1. For tractor models 385, 454, 464, 474, 485, 574, 584, 585, 674, 684, 685, 784, 884, 885, 2400, 2500. Replaces 549670R2. (Part No: 3125306R1)
$52.44

No
Picture
Farmall Steering Wheel
- Tilt type 36 spline, 7\8 shaft, 3 covered spokes. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. Uses cap 400220R1. (Part No: 400217R1)
$55.97

Farmall Steering Wheel Cap
- Use with steering wheel 400217R1. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. Gasket available as p\n 402434R1. (Part No: 400220R1)
$101.80

No
Picture
Farmall Steering Wheel Cap Gasket
- Use with steering wheel cap 400220R1. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. (Part No: 402434R1)
$13.97

No
Picture
Farmall Steering Wheel Release Lever, Tilt
- For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. (Part No: 400214R21)
$23.10

No
Picture
Farmall Steering Wheel Release Lever Knob
- Use with 400214R21 release lever. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. (Part No: R5148)
$23.10

Farmall Steering Wheel
- 15-1\4 diameter, 36 spline, 13\16 shaft, 3 covered spokes. For tractor models 2294, 2394, 2594, 3294, 3394, 3594, (7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950 all with standard steering column). Replaces A164267, A61007, A65544. (Part No: A61007)
$55.97

Farmall Steering Shaft Support Knuckle
- Knuckle with Grease Zerk for steering shaft.For tractor models A, A-I, AV, B, BN, Super A, Super A-1, Super AV, 100, 130, 140. Replaces 8329DX, 365002R11, 9442DX, 6852DX, IHS964. (Part No: 9442DX)
$34.17

Farmall Steering Wheel
- Restoration quality steering wheel for Cub Cadet 70, 71, 72, 73, 100(->SN 400000). 13 Inch O.D. 11\16 inch hub with 40 splines. (Part No: 376176R1)
$40.42

Farmall Power Steering Cylinder Assembly
- For tractor models 1066, 1466, 1468, 1566, 1568, 766, 966, HYDRO 100. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Part No: 533279R94)
$361.33

Farmall Steering Wheel Spinner, Bare Aluminum
- Comes with mounting hardware. (Part No: R3275)
$7.12

Farmall Steering Wheel Spinner, Black
- Comes with mounting hardware. (Part No: R3276)
$6.60

Farmall Steering Wheel Spinner, Red
- Comes with mounting hardware. (Part No: R3277)
$7.20

Farmall Steering Wheel Spinner, Green
- Comes with mounting hardware. (Part No: R3278)
$7.20

Farmall Steering Wheel Spinner, Blue
- Comes with mounting hardware. (Part No: R3279)
$7.20

Farmall Steering Wheel Spinner, Yellow
- Comes with mounting hardware. (Part No: R3280)
$7.20

Farmall Steering Wheel Spinner, Orange
- Comes with mounting hardware. (Part No: R6323)
$6.69

Farmall Steering Sector Shaft
- Tapered shaft measures 3\16 keyway at gear end (straight end). Measures 1\4 wide keyway at the tapered end. For tractor models A (some), Super A, 100, 130. (Part No: 356549R1)
$89.01

Farmall Bracket, Belt Driven Power Steering Pump
- Bracket bolts to the left side of the engine above the governor. For tractor models M, MV, Super M, Super MV, MTA, 400, 450, W6, Super W6, W6TA, W400, W450. (Part No: 20969)
$72.45

Farmall Steering Sector Shaft
- Square end for for steering arm. For tractor models A, AV, Super A, Super AV, IA, ISA. (Part No: 47683DB)
$115.92

Farmall Eaton Power Steering Pump Replacement
- This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5\8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Part No: S03-1003)
$384.33

No
Picture
Farmall Steering Clutch Disc
- Fiber Disc is 10.868 O.D., 59 spline. For model TD6. (Part No: 43729DC)
$31.84

Farmall Steering Worm Bearing Retainer
- This Worm Bearing Retainer is 2.1875 inches in diameter and has 12 RH Threads. For models 2404, 2424, 2444, 2504, A, AV, B, BN, C, H, HV, M, MD, MDV, MV, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 404, 424, 444, 450, 504. (Part No: 6660DA)
$22.50

Farmall Steering Worm Shaft Seal.
- This lower steering worm wheel shaft measures 1.125 inch inside diameter, 1.565 inch outside diameter, 0.250 inch wide. It is the seal for splined shaft that center tie rod arm mounts on. Replaces 350891R91, 358801R91, 358836R91, 370510R91, 371410R91, 515448R91. (Part No: 195501M1)
$3.44

Farmall Steering Sector Shaft Bushing
- This Bushing is used for Vertical Steering sector Shafts on A, Super A, 100, 130, 140. It is 1.689' long with a 1.325 outside diameter and a 1.190 inside diameter. It must be reamed to size after installation. Replaces: 47676DR (Part No: 47676DR)
$19.95

Farmall Steering Shaft Support Bearing Assembly
- This Steering Shaft Support Bearing Assembly is made with ductile iron (ASTM 65-45-12.) This is an improvement over the factory design which utilized grey iron. Two pieces. Fits: C, Super C, 200, 230, 240, 2404, 404; Replaces: 351125R1, 351125R2, 351126R1, 351126R11, 351126R12 (Part No: 351126R12)
$56.93

Farmall Steering Sector Gear
- This Steering Sector Gear A (Some), Super A, 100, 130; 9 full teeth, 3\16 Keyway. Replaces: 351815R1, 47677DA. (Part No: 47677DA)
$136.62

Farmall Steering Wheel Shaft Worm Oil Seal
- This steering wheel Shaft Worm Oil Seal measures 1.000 inside diameter, 1.624 outside diameter and has a .250 width. Used on A, AV, Super A, Super A-1, Super AV, Super AV-1, 100, 130, 140 all with Long Steering Wheel Shaft. Replaces: 358229R91, 358782R91, 358821R91, 383332R91, 48956D (Part No: 48956D)
$12.95

Farmall Steering Sector Bushing, Bearing & Seal Kit
- This 11-Piece Steering Sector Bushing, Bearing & Seal Kit Includes: Steering worm shaft bushing, steering wheel shaft bushing, steering worm wheel shaft bearing, steering worm bearing, steering gear housing gasket, steering worm oil seal, and steering worm wheel shaft oil seal. Bushings must be honed (reamed) to size when installed. Fits: A, AV, Super A, Super A1, Super AV, Super AV1, 100, 130, 140; Replaces: 1981225C1, 261733, 2099680, 358775R91, 358782R91, 358812R91, 358815R91, 382229R91, 382229R91, 382230R91, 41096DBR, 47675D, 47676DR, 47703D, 48956D, 85652H, R39667, ST287, ST288 (Part No: IHS1800)
$75.90

Farmall Steering Worm Shaft
- This Steering Worm Shaft is 46-1\2 overall length with 3\4 NF thread. This shaft will NOT fit diesels UNLESS customer lengthens the shaft. Fits: (M, MV gas, LP), (MTA, MTAV, Super M, Super MTA, Super MV, Super MVTA gas, LP; up to SN: F52627 or L512541), (400 LP Only; with 22 tank; SN: 21804 and up without factory power steering), (450 LP Only; with 22 tank; Up to SN: 13135 without factory power steering); Replaces: shaft: 50052DB, 50052D (Part No: 50052D)
$162.77

Farmall Steering Worm Shaft Oil Seal
- This Steering Worm Shaft Oil Seal Measures 1.000 I.D., 1.503 O.D., 0.250 wide, Fits B, BN, C, H, HV, M, MD, MDV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDV-TA, Super MV, Super MVTA, 200, 230, 240, 400, 450, MTA diesel, 300, 340, 350 Replaces: 359042R91, 359257R91, 364468R91, 43800D, 43800DA, 488561R91 (Part No: 43800D)
$7.95

Farmall Steering Worm Shaft Bearing
- This Steering Worm Shaft Bearing has a 0.984 Inside diameter, a 2.047 outside diameter and a 0.590 width. Fits B, BM, BN, C, H, HV, M, MD, MDV, MTA, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDV-TA, Super MTA, Super MV, Super MVTA, 200, 230, 400, 450, Super MTA, (424, 444 used as a steering worm shaft bearing; without power steering), 240, 300, 340, 350, 404, 504, 240, 404. Replaces: 1271857C91, 1273146C91, 210041, 43357D, 69696D, 741-0360, 741-3037, 941-3037, ST225, ST225AT, ST225B, ST225BT, ST225Y, ST678 (Part No: ST225B)
$6.75

Farmall Steering Wheel Nut
- This steering wheel nut fits the following tractor models: Cub Cadet 100, Cub Cadet 102, Cub Cadet 122, Cub Cadet 70, A, AV, AV1, B, BN, C, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDVTA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, Super WD6, Super WD6TA, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 200, 230, 600, 650, Cub Lo-Boy, 300, 400, 450, and Cub. It measures 0.075 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 114499, 122403, and 219753. (Part No: 353435X1)
$0.44

Farmall Steering Wheel Nut
- This steering wheel nut fits the following tractor models: Cub Cadet 100, Cub Cadet 102, Cub Cadet 122, Cub Cadet 70, A, AV, AV1, B, BN, C, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDVTA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, Super WD6, Super WD6TA, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 200, 230, 600, 650, Cub Lo-Boy, 300, 400, 450, and Cub. It measures 0.075 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 114499, 122403, and 219753. (Part No: 353435X1)
$0.44

Farmall Filter, Power Steering
- Filter case size is 3 inches diameter and 1 1\2 inch height. Center hole is approximately 7\8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Part No: AE33538A)
$2.30

Farmall Steering Gear Assembly
- This is a Steering Gear Assembly with drop down arm. It is used on 235 Compact tractor. Replaces 99327C1, 1273235C92 (Part No: 99327C1)
$411.97

Farmall Steering Wheel
- This Steering Wheel is For single keyed shaft. Tapered hub .707 inch to .775 inch, .191 inch keyway width. (Part No: 708424R91)
$29.85

Farmall Steering Sector Bushing
- This Steering Sector Bushing is used on B414 and B275 Tractors. It replaces original part number 708601R1 (Part No: 708601R1)
$17.69

Farmall Steering Sector Seal
- This Steering Sector Seal is used on IH B275 and B414 Tractors. It replaces original part number 708602R1 (Part No: 708602R1)
$9.92

Farmall Steering Bearing and Race
- This Steering Bearing and Race is used on B275 and B414 Tractors. It replaces 708611R1 and 708612R1 (Part No: 708611R1)
$24.80

Farmall Steering Shaft Bushing
- This is the upper Steering Shaft Bushing used on IH B275 and B414 Tractors. It replace original part number 708613R1 (Part No: 708613R1)
$4.97

Farmall Steering Shaft Upper Gasket
- This Steering Shaft Upper Gasket is used on IH B275 and B414 Tractors. It replaces original part number 708623R1 (Part No: 708623R1)
$1.23

Farmall Steering Worm Shaft
- This Steering worm Shaft is used on IH B275 and B414 Tractors. It replaces original part number 708604R1 (Part No: 708604R1)
$83.66

Farmall Steering Sector Shaft
- This Steering Sector Shaft (Rocker Shaft) is used on IH B275 and B414 tractors. It replaces original part number 708605R1 (Part No: 708605R1)
$63.88

Farmall Steering Shaft Assembly
- This Steering Shaft Assembly (Steering Bail Nut Assembly), is used on IH 274 Tractor. It replaces original part number 1432160R91 (Part No: 1432160R91)
$220.52


Click here to see parts by model







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2015 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.