(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Farmall Tractor Gear


Click here to see parts by model


Farmall Fourth & Fifth Gear
- Fourth & Fifth Sliding Gear For H 18 & 35 teeth Replaces: 357946R1, 51561D, 56420D, 56420DA (Part No: 56420DA)
$102.47

Farmall Third & Fourth Gear
- Third & Fourth Driving Gear For H 31 & 35 teeth. (TIS, 0127R) (Part No: 56417DA)
$141.18

Farmall Camshaft Gear
- 58 Teeth For tractor models M, MV, Super M, Super MTA, Super MV, 06, T-6, W-6, Super W-6, 400, and 450, all with the C248, C264, and C281 gas engines For gas powered tractors. Replaces: 6760D, 6760DB (Part No: 6760DB)
$113.75

Farmall Gear Shift Knob
- For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Part No: 53717DA)
$5.25

Farmall 1st & Reverse Sliding Gear
- For tractor models Cub, Cub Lo-Boy. 13 teeth. (Part No: 350867R1)
$31.50

Farmall 2nd & 3rd Sliding Gear
- For Cub (To SN# 192112) 17 & 26 teeth. (0108R) (Part No: 350868R1)
$49.61

Farmall Constant Mesh Gear
- For tractor models H, HV, Super H, Super HV, W4. 55 Teeth. Replaces: 357459R2, 48418D, 48418DA (Part No: 357459R2)
$115.92

Farmall Steering Worm Gear
- For H, HV, Super H, Super HV, Farmall 300, 350. This 32 teeth gear mates with the bottom of the steering shaft. Can use 50038DA with 19 teeth also. (Part No: 50038DB)
$149.41

Farmall Ring Gear,Flywheel
- For tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 240. This Gear has 90 teeth, 11.435 O.D., .50 wide. (Part No: 55755DB)
$31.61

Farmall Ring Gear Flywheel
- For tractor models H, Super H, Super W4, 300, 330, 340, 350. This flywheel has 104 teeth, 13.165 inches O.D., 12 inches I.D., .550 inches wide (Part No: 45638DB)
$50.14

Farmall Ring Gear, Flywheel
- For tractor models M, MD, 0DS6, Super M, Super MD, Super W6, WD6, W400, W450, W6, 400, 450, (560, 660 ALL DSL ONLY). This ring gear has 125 teeth, 15.72 O.D., .80 wide. (Part No: 266142R1)
$75.90

Farmall Ring Gear
- For 385, 395, 454, 464, 484, 485, 495, 574, 584, 595, 684, 685, 695, 784. Flywheel Ring Gear. 126 Tooth, 15.93 O.D., 14.625 I.D., .562 Wide. (Part No: 60883H)
$61.44

Farmall Hydraulic Pump Drive Gear
- For 706, Farmall 756 up to SN# 17635, International 756 up to SN# 8424, 806, Farmall 856 up to SN# 27286, International 2856 up to SN# 9492, 1206, 1256, 2706, Farmall 2756 up to SN# 17635, International 2756 up to SN# 8424, 2806, Farmall 2856 up to SN# 27286, International 2856 up to SN# 9492, 4100, 21206, 21256. Hydraulic Pump Drive Gear with 20 degree Tooth Angle. (3180R) (Part No: 382332)
$116.43

Farmall 3RD & 4TH Drive Gear
- 26 & 29 Teeth For M, MD. (Part No: 56530DA)
$125.93

Farmall 4TH & 5TH Sliding Gear
- 20 & 34 Teeth For M, MD. (R0130) (Part No: 56535DA)
$130.41

Farmall Steering Sector Gear
- For tractor models Super A, 100, 130, 140. 9 Tooth Worm Gear 1\4 inch Keyway. Use with 70890C1 Shaft. (Part No: 70888C1)
$143.02

Farmall Gear, Transmission Oiler Slinger
- Also replaces 58340D. For tractor models 100, 130, 200, 230, 240 with High Speed & Low Reverse Attachment, A SN# 39022>, B SN# 39022>, A, C, Super A, Super C. (Part No: 354643R11)
$169.99

Farmall 1st & Reverse, Sliding Gear
- 44 Teeth. For tractor models M, MD, MV with SN# 13807 and above.Super M SN# F 501-F52627 & L 500001-512541. Super MD SN# FBK 13807 and above. Super MTA SN# F 501-F52627 & L 500001-512541. (Part No: 56533DA)
$194.41

Farmall Steering Worm Gear, Sector
- 32 Teeth, For tractor models 400, 450, M, Super M, Super MTA.The style of this gear is full circle. This gear has 32 teeth. It can also replace a 19 tooth sector (1\2 moon style). Replaces: 50037DA, 50037DB, 704168R1. (Part No: 50037DB)
$144.83

Farmall Camshaft Timing Gear
- 66 tooth. For tractor models (100, 130, 140, 200, 230, 240, Super C all with 123 CID eng), (330, 340, 404 all with 135 CID eng), (424 with 146 CID eng), (444, 504 with 153 CID), (A, AV, B, BN, C, Super A, Super A1, Super AV, Super AV1 with 113 CID eng). Replaces 375712R1, 6779DB. (Part No: 375712R1)
$102.74

Farmall Gear Shift, Torque Amplifier, Forward, Reverse Knob
- For tractor models 544, 656, 664, 666, 686, 2544, 2656, 2826, 3488, Hydro 70, Hydro 86, Hydro 100, Hydro 186, 826, 966, 1026, 1066. (Part No: 388180R2)
$17.85

Farmall Crankshaft Timing Gear
- 24 teeth. For tractor models (H, HV with C-152 engine), (Super H, Super HV with C-164 engine), (300 with C-169 engine). Replaces: 43706D (Part No: 43706D)
$61.48

Farmall Crankshaft Timing Gear
- For tractor models (454 with C-157), (350, 454, 464 with C-175), (504, 2504 with D-188), (544, 574, 674 with C-200), (460, 606, 2606 with C-221), (460, 606, 2606 with D-236), (560, 656, 660, 706, 2706 with C-263), (560, 656, 660, 706, 2706 with D-282), (Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706 with C-291), (806, 826, 856 with C-301). Replaces: 367272R1 (Part No: 367272R1)
$106.19

Farmall Camshaft Timing Gear
- 48 teeth. For tractor models (H, HV with C-152 engine), (Super H, Super HV with C-164), (300 with C-169). Replaces 6664D, 6664DA, 6664DB (Part No: 6664DB)
$91.77

Farmall Camshaft Timing Gear
- 54 Teeth. For tractor models (454 with C-157 engine), (350, 454, 464 with C-175), (504, 2504 with D-188), (544, 574, 674 with C-200), (460, 606, 2606 with C-221), (460, 606, 2606 with D-236) (560, 656, 660, 706, 2706 with C-263), (560, 656, 660, 706, 2706 with D-282), (2706 with C-291), (Hydro 70, Hydro 86, 666, 686, 706, 756, 766 with C-291), (806, 826, 856 with C-301). Replaces 367240R1. (Part No: 312500R1)
$129.29

Farmall Flywheel Ring Gear
- 132 teeth, 16.680 O.D., 15.485 I.D., .610 wide. For tractor models (1026 diesel), (1066 hydro or diesel), (21026, 2826, 2856, 3088, 3288 diesel), (3488, 3688 hydro, diesel), (706, 756, 766, 786 diesel), (806 with D361), (826, 856, 886, 966, 986, Hydro 100, Hydro 186 diesel). (Part No: 341604R1)
$59.15

Farmall Torque Amplifier Gear, Constant Mesh
- For tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 6388, 6588, 21206, 21256, 21456. (Part No: 382349R1)
$176.35

Farmall Torque Amplifier Primary Sun Gear without Bearing
- 23 tooth, For tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, (Super MTA SN# 60001 and up). (Part No: 361283R32)
$187.05

Farmall Gear, 3rd & 4th Sliding
- 31 teeth. For tractor models 1206, 1256, 21206, 21256, 2706, (Farmall 2756, 756 SN# up to 17635, IH SN# up to 8424), 2806, (Farmall 2856, 856 SN# up to 27286, IH SN# up to 9492), 706, 806. (Part No: 380125R2)
$413.08

Farmall Parking Gear
- 35 teeth, 17 spline. For tractor models Hydro 186, 706, 756, 786, 806, 826, 856, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, Hydro 3488, 3588, 3688, 3788, 6388, 6588, 21026, 21206, 21256, 21456. Replaces 380288R2 138764C1, 138764C2, 380288R1. (Part No: 138764C2)
$174.50

Farmall Gear, Pump Drive
- 61 teeth. For tractor models 1026, (1066 gear drive), Hydro 1066, (1086 SN# up to 47999 & 55000 and up), 1206, 1256, 1456, (1466, 1468 gear drive), (1486 SN# up to 25999 & 29150 and up), 21206, 21256, 21456, 2706, 2756, 2806, (2826, 826 hydro or gear drive), 2856, 3088, 3288, 706, 756, (766 gear drive), 786, 806, 856, 886, (966 hydro or gear drive), (986 SN# up to 23999 & 28000 and up), Hydro 100, (Hydro 186 SN# up to 11999). (Part No: 380319R1)
$218.11

Farmall Gear, 3rd & 4th Sliding
- 31 teeth, 20 splines. For tractor models 1066, 1086, 1456, 1466, 1468, 1486, 21456, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 6388, 6588, 756, 766, 786, 826, (856 SN# up to 9492), (886, 966, 986, Hydro 100. (Part No: 528675R1)
$228.04

Farmall Gear, Reverse Idler
- 30 tooth. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 2706, 2756, 2806, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 706, 756, 766, 786, 806, 826, 856, 966, 986. (Part No: 393523R1)
$230.64

Farmall Knob, Gear Shift, Torque Amplifier, Transmission
- For tractor models 756, 766, 826, 856, (886 up to SN# 16999), 966, (986 up to SN# 23999), 1066, (1086 up to SN# 47999), 1256, 1456, 1466, 1468, (1486 up to SN# 25999), 1566, 1568, (1586 up to SN# 20999), (3388 up to SN# 10384), (3588 up to SN# 12729), (4386 SN# 2501 and up), 4568, 4586. (Part No: 397978R2)
$22.05

No
Picture
Farmall Constant Mesh Gear
- Used on tractors without torque amplifiers. For tractor models 756, 856, 826, 1456, 766, 966, 1066, 1466, 1468, 786, 886, 986, 1086, 1486, 3088, 3288, 3688. (Part No: 528670R1)
$150.24

Farmall Drive Gear, Reverse
- For tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2806, 3088, 3288, 3488, 3688, 2706, 2756, 2826, 2856, 21026, 21206, 21256, 21456. (Part No: 393525R2)
$301.92

Farmall Gear, Constant Mesh
- For tractor models Hydro 186, (756, 2756 Farmall SN# 17636 and up or IH SN# 8425 and up), 766, 786, 826, (856, 2856 Farmall SN# 27287 and up or IH SN# 9493 and up), 886, 966, 986, 1026, 1066, 1086, 1456, 1466, 1468, 1486, 3088, 3288, 3388, 3488, 3688, 6388, 21026, 2826, 21456. (Part No: 406028R1)
$264.53

Farmall Ring Gear, Flywheel
- Has 133 teeth. Fits tractors: HYDRO 70 (with C-291, D-312 Engines), HYDRO 86 (with C-291, D-310, D-312 Engines), 504 (Gear & Hydro Drive with D-188 Engine SN# 13676->), 544 (with C-200 Engine), 656 (Gear & Hydro Drive with C-263 Eng. \ Hydro Drive with D-282 Engine, 666 (Gear & Hydro Drive with C-291 Eng. \ Hydro Drive with D-312 Engine, 686 (Gear Drive with C-291 Engine).INDUSTRIAL\CONSTRUCTION: 2504 (Gear & Hydro Drive with D-188 Engine 2544 (with C-200 Engine), 3500A (with C-200 Engine), 3514 (Gear & Hydro Drive with D-188 Engine, 3514 (with Synchromesh Trans. with C-175 Engine), 3514 (without Hydra-Shuttle Trans. with C-153 Engine, 8000 (Forklift with C-200 Engine). Measures 12 5\16 inch inside diameter and .485 inch width. (Part No: 396421R1)
$57.90

Farmall Worm Gear Shaft Nut
- For tractor models Super A, 100, 130, 140. Nut for Worm Gear Shaft p\n 70890C1. (Part No: 359040R1)
$8.23

Farmall Crankshaft Gear
- 29 Teeth. Fits the M, MV, Super M, Super MTA, Super MV, O6, T-6, W-6, Super W-6, 400, and 450, all with the C248, C264, and C281 gas engines. (Part No: 45627D)
$91.19

Farmall Crankshaft Timing Gear
- 33 Teeth, used in C113, C123, C135, C146, & C153 Engines. For tractor models A, Super A, AV, Super AV, B, BN, C, Super C, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504. (Part No: 46870DA)
$59.85

No
Picture
Farmall Timing Gear, Camshaft
- 66 teeth. For tractor models 666, 686, 766, 826, 886, 926, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 70, Hydro 86, Hydro 100, Hydro 186. All with one of the following engines D312, D360, D414, DT414, D436, DT436, D466, & DT466. (Part No: 675600C1)
$119.06

No
Picture
Farmall Timing Gear, Crankshaft
- 33 teeth. For tractor models 666, 686, 766, 826, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 70, Hydro 86, Hydro 100, Hydro 186. All with one of the following engines D312, D360, D414, DT414, D436, DT436, D466, & DT466. (Part No: 675406C1)
$89.91

Farmall Transmission Gear
- 1st and Reverse gear for model B275. (Part No: 751070R1)
$75.83

Farmall Transmission Gear
- 2nd and 3rd gear for tractor models 2424, 2444, 384, 424, 444, B275, B414. (Part No: 751071R1)
$110.33

Farmall Transmission Gear
- Sliding Gear for models: 2424, 424, B414. (Part No: 1712-4408)
$550.62

Farmall Transmission Gear
- 2nd Gear for models: 2424, 2444, 384, 424, 444, B275, B414 (Part No: 751054R1)
$68.93

Farmall Transmission Gear
- Sliding Gear Coupling for models: 2424, 2444, 384, 424, 444, B414 (Part No: 3040868R3)
$78.00

Farmall Transmission Gear
- Transmission Spline Shaft & Drive Gear (Crown Wheel) for model B275. (Part No: 709448R92)
$248.33

Farmall Transmission Gear
- Reverse Shaft & Gear for models: 2444, 384, 444. (Part No: 3071849R2)
$64.17

Farmall Transmission Gear
- 3rd and 4th Gear for models: 2424, 2444, 384, 424, 444, B414 (Part No: 751055R3)
$124.13

Farmall Transmission Gear
- Constant mesh gear for tractor models 276 354 & 2300. (Part No: 751058R2)
$96.53

Farmall Transmission Gear Kit
- Ring and Pinion for tractor models B414, 424, 444, 354, 364, 384, 3414, 2424, 2444. (Part No: 3069966R91)
$255.30

Farmall Gear Shift Lever
- For model Cub all with pan seat NOT with deluxe seat. Made in the USA. (Part No: 356530R91)
$64.30

Farmall Ring Gear
- Ring Gear. For tractor models 2424, 384, 424, 444, B275, B414 (Part No: 704436R1)
$39.88

Farmall Ring Gear
- Ring Gear for models: 2400 Series, 454, 644, 844 (Part No: 3055133R1)
$55.13

Farmall Ring Gear, Flywheel
- 84 teeth, 8.696 Inside diameter and 10.678 Outside diameter. For tractor models Cub, (184 Baler), 55T, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. (Part No: 251270R2)
$55.20

Farmall Oil Pump Drive Gear
- This Oil Pump Drive Gear Fits: B-250, B-275, B-414, 2300A, 2444, 3414, 3444, 354, 434, 444, Forklift: 7000; For all models listed if they have the BC-144 gas engine. 10 teeth, 1.726 Overall length, May have to re-drill hole in shaft for drive pin. Replaces: 3043830R1 (Part No: 3043830R1)
$118.38

Farmall 2nd and 3rd Sliding Gear
- This 2nd and 3rd Sliding Gear has 16 and 26 teeth. It fits Cub (sn 192113 and up), Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy Replaces: 364520R1 (Part No: 364520R1)
$69.00

Farmall 1st And Reverse Slider Gear
- This 1st And Reverse Slider Gear has 14 splines and 57 teeth. It is used on 2544, 2656, 544, 656, 664, 666, 686 and replaces original part number 388165R1 (Part No: 388165R1)
$178.71

Farmall Steering Sector Gear
- This Steering Sector Gear A (Some), Super A, 100, 130; 9 full teeth, 3\16 Keyway. Replaces: 351815R1, 47677DA. (Part No: 47677DA)
$136.62

Farmall Hydraulic Pump Gear
- This New Hydraulic Pump Gear has 16 teeth. It Fits: C, Super A, Super A-1, Super AV-1, Super C, T340 (gas, with 9 GPM side engine mounted pump, ), [ T4, T5 (gas, with 9 GPM side engine mounted pump) ], 100, 130, 140, 200, 230, 240, [ 2424, 2444, 340, 424, 444 (GAS) ], 330, 404, Crawler: 500 (GAS, with 9 GPM side engine mounted pump, ); Replaces: 350709R1 (Part No: 350709R1)
$86.25

Farmall Hydraulic Pump Drive Gear
- This New Hydraulic Pump Drive Gear has a 25 degree tooth angle and 19 teeth. It is used on 1066, 1086, 1456, 1466, 1486, 1566, 1568, 1586, 3088, 3288, 3688, 766, 786, 826, 886, 966, 986, Farmall Rowcrop: (756 serial number 17636 and up), (856 serial number 27287 and up), Hydro: Hydro 100, International Utility: (756 serial number 8425 and up), (856 serial number 9493 and up). This part replaces original part number 405181R1 (Part No: 405181R1)
$44.25

Farmall Crankshaft Gear
- This Crankshaft Gear has 33 Teeth. It is used on D155, D179, D206, D239, D246 and D268 Engines. Replaces original part number 3055028R1 (Part No: 3055028R1)
$122.82

Farmall Crankshaft Balancer Gear
- This Balancer Gear is used on D206, D239 and D246 Engines. It has 80 Teeth. Replaces 3136237R1 (Part No: 3136237R1)
$96.46

Farmall Camshaft Gear
- This Camshaft Gear is used with 3063934R3 Camshaft. Replaces 3064085R1, 703812R1 (Part No: 3064085R1)
$29.24

Farmall Crankshaft Gear
- This Crankshaft Gear used on IH B275, B414, 424, 434, 444, 354, 364, 384, 3414, 2424, 2444, TD5, EARLY 500. Replaces 703865R1 (Part No: 703865R1)
$29.95

Farmall Steering Gear Assembly
- This is a Steering Gear Assembly with drop down arm. It is used on 235 Compact tractor. Replaces 99327C1, 1273235C92 (Part No: 99327C1)
$411.97


Click here to see parts by model







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2015 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.