FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 706 Tractor Parts

[Categories] [All Farmall Models] [Print]

Accessories / Supplies

Engine Block Heater - Frost plug heater with cord. 600 watt, 120 volt. Locks securely into engine block. 1-5/8 inch diameter with o-ring seal. Replaces 407046R92. Cord is 12 inches long. Fits gas engines: C153, C221, C263, C301 and diesel: D188, D166, D236, D282, D361, D236, D282, D. For 2504, 2806, 315, 340, 403, 453, 460, 503, 504, 560, 606, 615, 656, 660, 706, 715, 806. (Item #: 120027, Ref: 106725A1) $41.90

Belts

Belt - Fan - For International / Farmall tractor models 706 (s/n 5274-later), 756 (diesel), 826 (diesel), Replaces International OEM number 530076R1, Type: REL (Raw Edge Laminate), Length: 64.25", Width: 1/2", Thickness: .43", Material: Polyester Cord, (Item #: 182225) $24.00

No
Picture
Belt - Fan - For International / Farmall tractor models 460, 560, 606 (s/n 12799-13949), 656, 660, 706 (s/n 49664-earlier), 706 (s/n 49664-later), Replaces OEM number 385738R1, Replaces Case IH OEM number 316250R1, Color: Black, Length: 49.3, Material: Polyester Cord, Thickness: 0.373, Width: 1/2, Type: REC (Raw Edge Cogged), (Item #: 123126) $8.70

$Farmall 706 Belt - Generator \ Water Pump$
Belt - Generator / Water Pump - For International / Farmall tractor models Hydro 70, Hydro 86, 656, 666, 686, 706, 756, 766, 806, 826, 856 (Alternator), Compatible with International Combine (s) 715, Replaces International OEM number 403617R1, All gas engines, (Item #: 123133) $13.90

Brakes

Bonded Lined Brake Disc - 8 inch x 5 inch, 12 spline. For tractor models Hydro 100, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 2706, 2756, 2806, 2826, 2856. Replaces 384166R92. (Item #: 105451, Ref: 1975468C2) $19.30

No
Picture
Brake Arm Replacement Pad and Screw - For International / Farmall tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3788, Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number M300, Can only be used on OEM 1981317C1 brake arms that have a replaceable pad., (Item #: 176618) $18.30

Brake Disc, Used - For International tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, Replaces International OEM number 384166R92, 1975468C2, Splines: 12 Internal, Outer Diameter: 8.000", Inner Diameter: 5.000", For a new version of this item use Item #: 105451, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405451) $10.01

Brake Housing, Used - For International tractor models 706, 756, 806, 856, 1206, 1256, 2706, 2756, 2806, 2856, 21206, 21256, Replaces International OEM nos 392780R11, Replaces Casting nos 392780R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434463) $98.01

Brake Kit - Kit includes (1) 384368R12 brake piston, (1) 530807R2 o-ring, (1) 2385236 o-ring, (1) 2385261 o-ring, (1) 530806R91 seal, (4) 384367R2 springs, (2) 1975468C2 bonded brake discs. For tractor models 1026, 1066, 706, 756, 766, 806, 826, 856, 966, Hydro 100. (Item #: 162749, Ref: 384166KIT) $229.00

No
Picture
Brake Kit - For International / Farmall tractor models 706, 756 (Farmall s/n 16737-earlier, IH s/n 8413-earler), 806, 856 (Farmall s/n 2479-later, IH s/n 9431-later), 1206, 1256 (Farmall s/n 14271-later, IH s/n 8699-later), 2706, 2756, 2806, 2856 (Farmall s/n 2479-later, IH s/n 9431-later), 21206, 21256 (Farmall s/n 14271-later, IH s/n 8699-later), Replaces International OEM number 1975468C2, 384166, 384166R91, Kit includes: (2) brake discs, (1) o-ring/seal kit, and (4) return springs, ID: 2-1/4", OD: 8.00", Spline Count: 12, Thickness: .436", (Item #: 176728) $176.00

Brake Operating Lever, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 856, 886, 966, 986, 1066, 1086, 1206, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3788, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM nos 384306R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 447297) $40.01

No
Picture
Brake Operating Rod with Clevis, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3788, 21206, 21256, 21456, Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number 384307R1, For a new version of this item use Item #: 172774, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 447304) $50.01

Brake Piston Assembly - For tractor models Hydro 100, 706, 756, 766, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 2706, 2756, 2826, 2856, 21026, 21206, 21256, 21456. (Item #: 105427, Ref: 384368R12) $154.00

Brake Piston Inner O-Ring - For International / Farmall tractor models Hydro 186, 706, 786, 806, 986, 1086, 1206, 1256, 1486, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, Compatible with International Construction and industrial models 21206, 21256, Replaces International OEM number 2385236, 3-1/4" x 3-1/2" x 1/8", (Item #: 162637) $1.50

Brake Piston Outer O-Ring - For International / Farmall tractor models Hydro 100, 706, 756, 766, 806, 1026, 1066, 1206, 1256, 1456, 1466, 1468, Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces OEM number 530807R2, 2385261, 384365R1, 530807R1, 8-1/4" x 8-1/2" x 1/8", (Item #: 162636) $7.00

Brake Piston Return Spring - For International / Farmall tractor models 706, 756 (Farmall s/n 16736-earlier, International s/n 8412-ealier), 806, 856 (Farmall s/n 24790-earlier, International s/n 9430-earlier), 1206, 1256 (Farmall s/n 14270-earlier, International s/n 8698-ealier), 2706, 2756 (Farmall s/n 16736-ealier, International s/n 8414--earlier), 2806, 2856 (Farmall s/n 24790-ealier, International s/n 9430-earlier), Compatible with International Construction and industrial models 21206, 21256 (Farmall s/n 14270-ealier, International s.n 869-ealier), Replaces Case IH OEM number 384367R2, (Item #: 129290) $7.40

Brake Plate - 8.050 inch outside diameter, 3.370 inch inside diameter, .645 inch thick. For tractor models (706, 2706 Farmall serial number up to 29000, IH serial number up to 4600), (806, 2806 Farmall serial number up to 23000, IH serial number up to 5700). (Item #: 105460, Ref: 384165R1) $103.00

Brake Plate, Intermediate - For tractor models 100, 1026, 1066, 1206, 1256, 21206, 21256, 2706 farmall serial number 29001>, international serial number 4601>, 2756, 2806 farmall serial number 23001>, international serial number 5701>, 2826, 2856, 706 farmall serial number 29001>, international serial number 4601>, 756, 766, 806 farmall serial number 23001>, international serial number 5701>, 826, 856, 926. (Item #: 105426, Ref: 392777R2) $45.40

Brake Rod, Left Hand - Park lock linkage, left hand thread park lock operating rod. For tractors: 706, 756, 766, 806, 826, 856, 966, 1066, 1256, 1456, 1566, 1568. Also industrial versions above. (Item #: 111211, Ref: 390857R1) $7.80

Brake Rod, Right Hand - Park lock linkage, right hand thread park lock operating rod. For tractors: 706, 756, 766, 806, 826, 856, 966, 1066, 1256, 1456, 1566, 1568. Also industrial versions above. (Item #: 111210, Ref: 390858R1) $7.90

Brake Valve Assembly, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 856, 886, 966, 1206, 1256, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 4386, 4586, 4786, 21206, 21256, Replaces International OEM nos 384186R3, 72807C93, 384186R2, 384186R1, 384186R93, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429973) $204.01

Intermediate Brake Plate, Used - For International tractor models Hydro 100, 706 (Farmall s/n 29001-later and International s/n 4601-later), 756, 766, 806 (Farmall s/n 230001-later and International s/n 5701-later), 826, 856, 966, 1026, 1066, 1206, 1256, 2706, 2806, 2826, 2856, 21026, 21206, 21256, Replaces International OEM number 392777R2, For a new version of this item use Item #: 105426, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405426) $20.26

No
Picture
Outer Brake Shaft Seal - For International / Farmall tractor models Hydro 100, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number 530806R91, (Item #: 162639) $11.30

Park Lock Assembly - For International / Farmall tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568, Replaces International OEM number 382847R1, 290856R1, 384261R1, 390856R1, 390858R1, 384263R1, 390857R1, 64578C91, (Item #: 110082) $38.20

No
Picture
Park Lock Assembly - For International / Farmall tractor models Hydro 100, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1468, 1566, 1568, Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number 64578C91, Assembly Includes: Turnbuckle, Rod and Clevis, (Item #: 173873) $58.00

Park Lock Handle, Used - For International tractor models Hydro 100, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM nos 386132R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434749) $20.01

Park Lock Lever Actuating Spring - For International / Farmall tractor models Hydro 100, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Replaces International OEM number 208354R1, Wire Diameter: 0.092", Overall Length: 5.245", (Item #: 124188) $11.00

Park Lock Lever Bracket, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3588, 3688, 3788, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM nos 384055R11, 384055R12, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434899) $140.01

Park Pawl - For tractor models 100, 1026, 1066, 1086, 1206, 1256, 1456, 466, 1468, 1486, 1566, 1568, 1586, 186 Hydro, 21026, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488 Hydro, 3588, 3688, 3788, 6388, 6588, 6788, 706, 756, 766, 786, 806, 826, 856, 966, 986. (Item #: 113420, Ref: 139141C1) $200.00

Primary Brake Plate Assembly, Used - For International tractor models 706 (IH s/n 4601-later, Farmall s/n 29001-later), 756 (IH s/n 8412-earlier, Farmall s/n 16736-earlier), 806 (IH s/n 5701-later, Farmall s/n 23001-later), 856 (IH s/n 9430-earlier, Farmall s/n 24790-earlier), 1206, 1256 (IH s/n 8698-earlier, Farmall s/n 14270-earlier), 2706 (IH s/n 4601-later, Farmall s/n 29001-later), 2756 (IH s/n 8412-earlier, Farmall s/n 16736-earlier), 2806 (IH s/n 5701-later, Farmall s/n 23001-later), 2856 (IH s/n 9430-earlier, Farmall s/n 24790-earlier), 21026, 21256 (IH s/n 8698-earlier, Farmall s/n 14270-earlier), Replaces International OEM nos 392776R21, Replaces Casting nos 392776R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434900) $291.01

Transmission Brake Lever Assembly, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3788, 21206, 21256, 21456, Replaces International OEM number 1981317C1, 384311N, 384311R11, 384311R21, M299, For a new version of this item use Item #: 111367, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411367) $29.01

Clutch

Bearing - Clutch pilot bearing, 2.0472 inch outside diameter, .787 inch inside diameter, .5906 inch wide bore, 2 seals. Tractors: 544, 606, 656, 664, 666, 686 706, 756, 766, 786, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1245, 1456D, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456D, 2544, For 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 21456, 2544, 2566, 2606, 2706, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 5186, 544, 606, 6388, 656, 6588, 664, 666, 6788, 686, 706, 756, 766, 786, 826, 856, 886, 966, 986. (Item #: 108078, Ref: 524598R91) $7.10

Clutch Alignment Tool - 1-13/16 inch, 11 spline, 1-3/4 inch, 17 spline, .787 inch pilot. For tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1466, 1468, 3088, 3288, 3688, 2706, 2756, 2806, 2856. (Item #: 122054, Ref: S.70928) $22.00

Clutch Bearing and IPTO Seal Kit - For tractor models 706, 756, 766, 786, 806, 826, 856. Includes: clutch release bearing, pilot bearing, inner and outer IPTO seals, o-ring (Item #: 184219, Ref: R2991) $86.00

Clutch Bearing and Seal Kit - Kit includes greasable release bearing N1174, pilot bearing 63042RS, inner 12363 and outer 19760 PTO seals, and o-ring 12250. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 3788, 4100, 4156, 4166, 4186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986. (Item #: 114543, Ref: N159763) $56.00

Clutch Bearing and Seal Kit - Kit includes sealed release bearing, pilot bearing, inner and outer PTO seals and o-ring. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1568, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986. (Item #: 172833, Ref: N158563) $45.60

Clutch Bearing Carrier - Replaces 380109. For tractor models Hydro 100, 1026, 1066, 1086, 1206, 1256, 1456, 466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 706, 756, 766, 786, 806, 826, 856, 966, 986 (Item #: 108765, Ref: 380109R1) $98.00

Clutch Bearing Seal Kit - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2856, 3088, 3288, 3688, 4100, 4156, 4166, 4186, 21206, 21256, 21456, For Use With OEM Carrier, Contents: 1-832503 Release Bearing, 1-836304 Pilot Bearing, 1-535208 Inner IPTO Seal, 1-535209 Outer IPTO Seal, 1-22414 IPTO Bearing Cage O-Ring, (Item #: 108785) $60.00

$Farmall 706 Clutch \ Brake Return Spring$
Clutch / Brake Return Spring - This spring has an overall length of 4.463 inch, with a wire diameter of 0.083 inch and an outside spring diameter of 0.744 inch. Fits: [1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 706, 756, 766, 806, 826, 856, 966 (use on the following gear drive tractor when used as a clutch pedal return spring)], [4100, 4156, 4166 (use on the following model when used as a clutch pedal and brake pedal return spring)]. Replaces: 626206R1. (Item #: 164483, Ref: 626206R1) $8.50

Clutch Disc - 12 inch, 4 button, spring loaded, 1.1875 inch spline diameter, 11 spline. For tractor models 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 400, 450, 500, 560, 600, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Super MTA. (Item #: 112266, Ref: 384395R94) $163.00

Clutch Disc - For International / Farmall tractor models Super MTA, Super W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688 (All Diesel), Replaces International OEM number 384395HD6, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Large Pads, (Item #: 112265) $131.00

Clutch Disc, Remanufactured - For International / Farmall tractor models Super MTA, Super W6, 400, 450, 560, 660, 706, 756, 786, 806, 826, 856, 886, 966, 2706, 2756, 2826, 2856, 3088, 3288, Clutch Diameter: 12", Clutch Hub Diameter: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 4 Pad, Extra Thick, (Item #: 205991) $120.01

Clutch Disc, Remanufactured - For International / Farmall tractor models Super MTA, Super W6, 400, 450, 560, 660, 706, 756, 786, 806, 826, 856, 886, 966, 2706, 2756, 2826, 2856, 3088, 3288, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Lg Carbotic Pads, (Item #: 205992) $153.01

Clutch Disc, Remanufactured - For International / Farmall tractor models Super MTA, Super W6, 400, 450, 560, 660, 706, 756, 786, 806, 826, 856, 886, 966, 2706, 2756, 2856, 3088, 3288, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Lg Pads Thick On Flywheel Side, (Item #: 205993) $141.01

Clutch Disc, Remanufactured, 384395R94 - For International / Farmall tractor models Super MTA, Super W6, W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 2706, 2756, 2806, 2826, 2856, 3088, 3288, Replaces International OEM number 384395R94, 384395R94R, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 204187) $117.00

Clutch Disc, Remanufactured, 384395R94 - For International / Farmall tractor models Super MTA, Super W6, W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, Replaces International OEM number 384395R94, 384395R94R, Clutch Size: 12", Clutch Hub: 1-3/16", Clutch Spline: 11, Clutch Center: Spring, Clutch Type: 6 Lg Pads, (Item #: 204189) $167.50

Clutch Kit - This new dual 12 inch clutch kit contains: 12 inch, 17 spline, 1.75 inch hub pressure plate assembly (405300R92); 12 inch, 11 spline, 1 3/16 inch hub, cerametallic clutch disc (384395R94); pilot (524598R91) and release (365867R91) bearings, and clutch alignment tool. For tractor models: 2706, 2756, 2806, 2826, 2856, 3088, 3288, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966. (Item #: 140640, Ref: 384395R94-KIT) $420.00

No
Picture
Clutch Kit, Remanufactured, 384395R94, 405300R92 - For International / Farmall tractor models 706, 756, 766 (dsl), 786, 806, 826, 856, 886, 966, 2706, 2756, 2806, 2826, 2856, 3088, 3288, Replaces International OEM number 384395R94, 405300R92, Clutch Diameter - 12", Clutch Hub Diameter - 1-3/16", Clutch Splines - 11, Clutch Center - Spring, Clutch Type - 6 Large Pads, Pressure Plate Size - 12", Pressure Plate Levers - 3, Pressure Plate Springs - 12, Pressure Plate Hub Diameter - 1-3/4", Pressure Plate Splines - 17, Pressure Plate Type - Single Stage, Flywheel Step 1.406", For a New version of this sku use Item #: 204189, Additional Handling and Oversize Fees Apply To This Item, (Item #: 202014) $494.40

Clutch Operating Rod, Rear - For International / Farmall tractor models 706 (s/n 17030-earlier), 756 (s/n 17030-earlier), 766 (s/n 7597-earlier), 806 (s/n 17030-earlier), 856 (s/n 17030-earlier), 966 (s/n 14085-earlier), 1066 (s/n 17030-earlier), 1206, 1256, 1456, 1466 (s/n 12145-earlier), 1468 (s/n 7405-earlier), Replaces International OEM number 380178R11, (Item #: 170210) $82.00

Clutch Pedal Pivot Pin - For International / Farmall tractor models Hydro 100, 706, 756, 766 (s/n 7597-earlier), 806, 826, 856, 966 (s/n 14085-earlier), 1026, 1066 (s/n 17030-earlier), 1206, 1256, 1456, 1466 (s/n 12145-earlier), 1468 (s/n 7405-earlier), Replaces International OEM number 384047R1, O.D.: .625", O.D.: .248", Length: 1.820", (Item #: 115111) $16.00

No
Picture
Clutch Pedal Pivot Shaft - For International / Farmall tractor models 706, 756, 766 (s/n 11780-earlier), 806, 826, 856, 966 (s/n 20613-earlier), 1066 (s/n 30176-earlier), 1206, 1256, 1456, 1466 (s/n 18131-earlier), 1468 (s/n 9546-earlier), Replaces International OEM number 395249R1, 384014R1, (Item #: 173877) $67.00

No
Picture
Clutch Release Bearing - For International / Farmall tractor models Super MTA, Super W6, 400, 450, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Compatible with Massey Ferguson tractor models 285, 1080, 1085, 1135, 1155, 1500, 1505, 1800, 1805, Replaces Massey Ferguson OEM number 834602M1, Inside Diameter: 2.500", Outside Diameter: 4.128", Width: 0.864", (Item #: 176789) $55.00

Clutch Release Bearing Return Kit - Kit includes, 1 bracket, 1 return spring, 1 bolt and pin 1/4 inch, 1 washer, 1 cotter key. For tractor models 1066, 1206, 1256, 1456, 1466, 1566, 2706, 2756, 2826, 2856, 706, 756, 766, 806, 826, 856, 966. (Item #: 172834, Ref: 50191001) $28.60

Clutch Release Fork - For tractor models 100, 1026, 1066, 1086, 1206, 1256, 1456, 466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 706, 756, 766, 786, 806, 826, 856, 966, 986. (Item #: 111850, Ref: 380110R1) $76.00

Clutch Release Fork, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM number 380110R1, For a new version of this item use Item #: 111850, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411850) $25.01

Clutch Release Shaft - For tractor models 100, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 706, 756, 766, 806, 826, 856, 966. (Item #: 113405, Ref: 380180R12) $84.00

Clutch Release Shaft Kit - For International / Farmall tractor models 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 380109R1, 380110R1, 380180R12, (Item #: 113406) $245.00

Clutch Release Shaft Kit - For International / Farmall tractor models 706, 806, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, Replaces International OEM number 892862M1, (Item #: 113424) $238.00

Clutch Rod Pin - For International / Farmall tractor models Hydro 100, 706, 756, 766 (s/n 7598-later), 806, 826, 856, 966 (s/n 14086-later), 1066 (s/n 17031-later), 1206, 1256, 1456, 1466 (s/n 12146-later), 1468 (s/n 7406-later), 1566, 1568, 4100, 4156, 4166, 4186, Replaces Case IH OEM number 382492R2, 382492R1, (Item #: 160845) $18.40

Pressure Plate Assembly - For International / Farmall tractor models 660, 706, 756, 766, 2706, 2756, 2806, 2826, 2856, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub Diameter: 1-3/4", Pressure Plate Splines: 17, Pressure Plate Type: Single Stage, For a Remanufactured version of this sku use Item #: 206075, (Item #: 122041) $266.00

Pressure Plate Assembly, Remanufactured, 405300R92 - For International / Farmall tractor models 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 2706, 2756, 2806, 2826, 2856, 3088, 3288, Replaces International OEM number 405300R92, 405300R92R, Type: Single Stage, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 17, Additional Handling and Oversize Fees Apply To This Item, (Item #: 204193) $126.00

Pressure Plate, Remanufactured - For International / Farmall tractor models 660, 706, 756, 766, 2706, 2756, 2806, 2826, 2856, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 17, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 122041, (Item #: 206075) $145.01

Pressure Plate, Remanufactured - For International / Farmall tractor models 660, 706, 756, 766, 806, 826, 856, 886, 966, 2706, 2756, 2806, 2826, 2856, 3088, 3288, Pressure Plate Size: 12", Pressure Plate Levers: 3, Pressure Plate Springs: 12, Pressure Plate Hub: 1-3/4", Pressure Plate Spline: 17, Pressure Plate Type: Single Stage, (Item #: 206076) $151.01

PTO Clutch Disc - Clutch disc kit, for independent PTO using 12 discs 381489R3 and 5 plates 381490R1. For single and dual speed tractors. For 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 21026, 21206, 21256, 21456, 2544, 2656, 2706, 2756, 2826, 2856, 3388, 4100, 4156, 4166, 4186, 544, 656, 664, 666, 686, 706, 756, 766, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86 (Item #: 164441, Ref: 68802C91) $58.00

PTO Clutch Kit - 5 fiber discs and 12 steel plates. For 706 thru 1086 (from 1962) with single speed PTO, 56, 66, 86. (Item #: 164441, Ref: R2973) $58.00

PTO Gasket and Clutch Disc Kit - Same kit as 77721, PTO Gasket and Clutch Disc Kit but also includes discs. For tractor models 100, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 21026, 21256, 21456, 2706, 2756, 2806, 2856, 3388, 3788, 706, 756, 766, 806, 826, 856, 886, 966, 986, all with independent PTO. Contains 9 plates (381489R3), 7 discs (381490R1), gaskets, o-rings (about 50 pieces). (Item #: 117126, Ref: PCK721) $180.00

No
Picture
Rear Clutch Operating Rod, Used - For International tractor models 706 (s/n 17030-earlier), 756 (s/n 17030-earlier), 766 (s/n 7597-earlier), 806 (s/n 17030-earlier), 856 (s/n 17030-earlier), 966 (s/n 14085-earlier), 1066 (s/n 17030-earlier), 1206, 1256, 1456, 1466 (s/n 12145-earlier), 1468 (s/n 7405-earlier), Replaces International OEM number 380178R11, For a new version of this item use Item #: 170210, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 455211) $44.01

Release Bearing - Clutch Release Bearing, inside diameter 2.49 inches, outside diameter 4.06 inches, width .820 inches, sealed roller. For mechanical release systems. For tractors: 400, W400, 450, W450, 560, 660, 756 766, 786, 886, 966, 986, 1066, 1086, 1206, 1256, 1456D, 1466, 1468, 1486, 1566, 1586, 21206, 21256, 21456, 2756, 3288, 3388, 3588, 3688, 3788 For 1026, 1066, 1086, 1206, 1256, 1456, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 21026, 21206, 21256, 21456, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 806, 815, 856, 915, 966. Replaces original part numbers 361407R91, 362026R91, 362027R91, 365867R91, 365868R91, 367153R91, 58612D, 69789C1 and 69789C91. (Item #: 112189, Ref: N1585) $23.20

Release Bearing - Greasable. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3688, 3788, 400, 4100, 4156, 4166, 4186, 4366, 4386, 450, 4568, 560, 6388, 6588, 660, 6788, 706, 756, 786, 806, 826, 856, 886, 966, 986, Hydro 100, W400, W450. It has an inside diameter of 2.50 inches, an outside diameter of 4.125 inches, and is .83 inches wide. Please verify measurements before ordering. (Item #: 107274, Ref: 365867R91) $25.00

Remanufactured Clutch Kit - Our new clutch kit contains: a 12 inch heavy duty, 17 spline 1 3/4 inch hub, 12 spring remanufactured pressure plate assembly; a 12 inch 11 spline, 1 3/16 inch hub, 6 pad remanufactured clutch disc; new release and pilot bearings. For tractors: 706, 756, 766, 786, 806, 826, 856, 986. Replaces YTO 104496K, 384395R94, 405300R92 (Item #: 140640) $420.00

Cooling System

Belt - This Fan Belt measures 1/2 inch wide and 48 5/8 inches long. For Diesel models 2706, 2806, 656, 660, 706, 806. Verify measurements before ordering. (Item #: 123127, Ref: 378113R2) $7.20

$Farmall 706 Belt - Generator \ Water Pump$
Belt - Generator / Water Pump - Outside diameter 47.77 inches, 1/2 inch v-belt. Replaces 403617R1, 372596R1, 393415R1, L71058. Used on the following gas tractors: Hydro 70, Hydro 86, 656, 666, 686, 706, 756, 766, 806, 826, 856 (Item #: 173491, Ref: 310050) $10.20

Fan, 6 Blade - 20.940 inch diameter, 1.250 inch pilot hole, 1.945 inch center to center on mounting bolt. For tractor models (2544, 544 diesel/gear drive), (2656 diesel), (Farmall 2706, 706 serial number 19250 and up, IH serial number 3000 and up), (544 gas/syncromesh trans), (656, 664 diesel). (Item #: 107023, Ref: A173726) $212.00

Fan and Generator Belt - Fits engines C221, C263, C301 on tractors: 2606, 2806, 460, 560, 606, 650, 660, 806. This is also an alternator belt for D282 diesel engine in: 560, 660. Generator and water pump belt in: 706, 2706. Belt is 1/2 inches wide and 46 inches in length. (Item #: 172612, Ref: 403348R1) $16.00

Fan Belt - Generator belt measures 49.77 inches Length and 0.50 inch Width, fits engines: D236, and D282. For tractor models: 460, 560, 660. Also, for engine D282 Alternator for tractor models 656, 706, 2706. For 2706, 460, 560, 656, 660, 706. Please verify measurements before ordering (Item #: 123129, Ref: 385674R1) $10.10

Fan Shroud, Used - For International tractor models Hydro 70, Hydro 86, 666, 686, 706, 756, 2706, 2756, Replaces International OEM nos 396356R1, Fits Farmall tractor models 706, 756, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431147) $128.01

Heater, Engine Block - This is a Frost Plug Heater with cord. It is 600 watts, 120 volt. Locks securely into engine block. 1-5/8 inch diameter with o-ring seal. Power Cord is about one foot long. Replaces 407046R92. Fits gas engines: C153, C221, C263, C301 and diesel: D188, D166, D236, D282, D361, D236, D282, D301. Tractors: 340, 460, 504, 560, 606, 656, 660, 706, 806, 2504, 2806. Combines: 315, 403, 503 Hillside, 503, 615, 715. (Item #: 120027, Ref: 106725A1) $41.90

Radiator - This radiator measures 3.5 inches thickness, 19.125 inches wide and 20.375 inches high. Radiator has 2 inch diameter hose connections. For tractor models (Farmall 656 gas), (Farmall 706 diesel serial number up to 37236, IH diesel serial number up to 5273), (706, 756 all LP and heavy duty gas). (Item #: 101721, Ref: 378713R92) $380.00

Radiator - Core size 19.125 inches wide, 20.375 inches high. For tractor models (756 diesel), (Farmall 706 diesel serial number 37236 and up), (IH 706 diesel serial number 5274 and up). (Item #: 101722, Ref: 396352R91) $575.00

Radiator - This radiator measures 19 1/8 inches across the fins, 20 3/8 from the top of the fins to the bottom of the fins and 2 7/8 inches wide. For tractor models 666, Hydro (serial number 10522 and up), 756 Gas, Farmall 544 Gas-Gear drive, 706 Gas (serial number 37237 and up). Also replaces 396351R9 and 403649R1. (Item #: 101717, Ref: 65426C1) $525.00

Radiator Cap - 7 pound, fits short filler neck. For tractor models 100, 130, 140, 1410, 1412, 1440, 1460, (1640 serial number 44C0034705 and below), (1660 serial number JJC0038346 and below), (1680 serial number JJC0045689 and below), 1822, 1844, 200, 2022, 230, 240, 2400A, 2424, 2444, 2500A, 2504, 2606, 300, 330, 3388, 340, 350, 3588, 3788, 404, 4100, 4156, 4166, 424, 4366, 4386, 444, 450, 4568, 460, 464, 474, 4786, 504, 560, 606, 6388, 656, 6588, 660, 6788, 706, 806, 990, Hydro 84, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9. (Item #: 112331, Ref: 180224M91) $6.81

Radiator Cap - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, 100, 130, 140 (s/n 13968-later), 200, 230, 240, 340, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 784, 806, 826, 856, 1026, 1206, 1256, 1456, Replaces International OEM number 532029R1, 393229R91, 402281R1, 378289R91, Pressurized, 1.5" Radiator neck I.D., (Item #: 112533) $22.70

Radiator Hose Lower - Radiator hose, lower, for diesel tractors. 1-7/8 inch inside diameter. For tractor models 666, 686, 706, 756, 826, 86, HYDRO 70. (Item #: 117698, Ref: 396355R1) $18.50

Radiator Hose, Lower - Radiator hose, lower. For tractors to serial numbere 5274, and Farmall to serial number 37237. For tractor models Farmall 460, 560, 656, 660, 706. (Item #: 115648, Ref: 369922R1) $15.50

Radiator Hose, Lower - Radiator hose, lower, for gas tractors. For tractor models 666, 686, 706, 756, 806, 826, 856, 86, HYDRO 70. 2 inch inside diameter, both ends. (Item #: 116660, Ref: 378704R1) $18.10

Radiator Hose, Lower - Radiator hose, lower for diesel tractors. International tractor to serial number 5274, and Farmall tractors to serial number 37237. For 460, 560, 656, 660, 706. (Item #: 115646, Ref: 371307R1) $14.50

Radiator Hose Upper - Radiator hose upper. For international tractor to serial number 5274, and Farmall tractor to serial number 37237. For tractor models 656, 706. (Item #: 116808, Ref: 379237R2) $21.60

Radiator Hose Upper - Radiator hose, upper, for gas tractors. For 666, 686, 706, 756, 86, HYDRO 70. 2 inch inside diameter on both ends. (Item #: 116661, Ref: 396353R1) $17.50

Radiator Hose, Upper - Radiator hose upper for diesel powered tractors. For International to SN# 8326, and Farmall to SN# 15185. For 706, 756 (Item #: 116813, Ref: 396354R1) $10.80

Radiator, Mounting Bracket Plate - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21256, 21456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. (Item #: 109941, Ref: 378710R91) $21.00

Radiator, Premium Used - For International tractor models 544, 706 (s/n 5273-earlier), 2544, 2706 (s/n 5273-earlier), Replaces International OEM number 378712R91, 378713R91, 378713R92, Our premium used radiators have been cleaned, inspected, and pressure checked, For a new version of this item use Item #: 101721, (Item #: 300278) $332.01

No
Picture
Radiator Support Panel - Left Hand, Used - For International tractor models 656, 706, 2656, 2706, Replaces International OEM nos 378664R11, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441690) $73.01

Thermostat - Thermostat. For tractor models Gas 460, 560, 656, 660, 806, 706, 2606, 2706, 2806. Does not come with gasket. We do not have a gasket available. (Item #: 109692, Ref: 108120R92) $11.50

Thermostat - This 160 degree Long Neck Thermostat. Fits the following tractor models: H, HV, M, MD, MDV, MTA, MV, O4, O6, Super H, Super HV, Super M, Super MD, Super W6, W4, W6, W9, 300, 350 Gas, 400, 450, 560 Diesel, 656 Diesel, 660 Diesel, and 706 Diesel. It does not come with a gasket. Replaces part numbers 313942R91, 313942R92, 315838R91, 317668R91, 37634DA, 261514R92. (Item #: 110010, Ref: R1852) $40.00

Thermostat - This Thermostat opens at 180 degrees F. It is used on the following Diesel tractors: 2606, 2706, 300, 350, 3616, 400, 450, 460, 560, 606, 656, 660, 706, TD6. Replaces 262882R1, 313942R91 (Item #: 110455, Ref: 70229927) $18.60

Tower Hose Clamp 2.685" to 2.995" - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, H, Super A, Super C, Super H, 100, 130, 140, 200, 230, 240, 300, 330, 350, 400, 450, 656, 706, 756, 806, 826, 856, 2706, 2756, 2806, 2826, 2856, Compatible with International Harvester (s) 55, 350, 550, 650, Replaces International OEM number 39205H, 706081R91, (Item #: 130443) $7.80

Water Pump - For diesel: Hydro, 686, 86, 706, 756, 2076, 715 serial number 23001 and up, Cotton Harvester 1400, 782 Cotton Picker, 786, 826, 886 serial number 14472 and up, 2826, 3088, 3288, 1420, 1400, 782. Water pump with hub installed, gasket included. (Item #: 100793, Ref: 3132676R93) $80.00

Water Pump - With Hub For 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2565, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 70, Hydro 86 Tractors, 151, 151 Hillside, 181, 205, 303, 315, 403, 453 Hillside, 615, 715 Combines with C221, C263, C291, or C301 Gas Engines or D166, D188, D236, or D282 Diesel Engine. Replaces: 303395R91, 303396R91, 308383R91, 318118R21, 318119R91, 318119R92, 323877R11, 368496R91, 395813R91, 601816C92, 701128C94 (Item #: 107892, Ref: 601816C92) $90.00

Water Pump By-Pass Hose - For International / Farmall tractor models 340 (Diesel), 460 (Gas), 504 (Diesel), 560, 606, 660, 706, 806 (all Gas), 2504 (Diesel), Replaces International OEM number 437575C3, 169192R1, 224563R1, 381547R1, 437575C2, 43757C1, ID: .590", OD: .926", Length 6.41", (Item #: 128128) $10.20

No
Picture
Water Pump Gasket - Plate to Block - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 303, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, T340, TD6, TD9, 3514, 3600, 3616, 3800, 3850, Compatible with International Hay Cutting (s) 275, 375, Replaces International OEM number 69676R1, For Reman Water Pump use Item #: 107892, (Item #: 156625) $5.40

Water Pump Hub - Used with water pumps 601816C92, 375742R92, 375793R92. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 330, 340, 404, 460, 504, 560, 606, 660, 706, 806. (Item #: 121936, Ref: 368501R2) $33.90

Water Pump - New - With Hub For 706, 756, 786, 826, 886 (FromS# 14472), 2076, 2826, 3088, 3288715 (From S#23001), 1420 Combines with D310 or D358 Engine s (Item #: 100793, Ref: WP1731) $80.00

Water Pump Pulley - Used with 601816C92 water pump. For tractor models Hydro 70, Hydro 86, 2606, 2656, 2706, 2756, 403, 460, 560, 606, 656, 660, 666, 706, 756, 766, 806, 826, 856. (Item #: 167558, Ref: 395815R2) $56.00

Water Pump, Remanufactured, 601816C92 - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 303, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models 3514, 3616, 3850, Compatible with International Hay Cutting (s) 275, 375, Replaces International OEM number 601816C92, 749170C91, Replaces Casting number 169204R1, 303394R2, 318118R2, Includes pump to backplate gasket, Includes backplate, Includes backplate to block gasket, For a New version of this sku use Item #: 156625, (Item #: 204199) $100.01

Decals and Emblems

No
Picture
Decal Set, Chassis - Vinyl cut decal set. For tractor models 1206, 706, 806. (Item #: 183638, Ref: R0564) $66.00

No
Picture
Emblem, Used - For International tractor model 706 (Diesel), Replaces International OEM number 381555R1, Includes push clip, For a new version of this item use Item #: 103936, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435321) $27.01

Front Emblem - Plastic "IH", red, black and white, 3-3/4 inch x 2-3/4 inch. For tractor models Cub Lo-Boy, 154, 184, 185, 140, 276, 404, 424, 434, 444, 504, 544, 553, 606, 654, 656, 666, 686, 706, 724, 756, 766, 786, 806, 824, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1466, 1468, 1486, 1586, 2400, 2404, 2424, 2444, 2500, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2856, 4156, 21206, 21256, Hydro 70, Hydro 86. (Item #: 108481, Ref: 2751846R1) $18.30

Front Emblem - Plastic "IH" red, black and white, 3-7/8 inch x 3-1/2 inch. Center to center measurement on the mounting posts is 2-17/32 inch. For tractor models 544, 656, 664, 706, 2544, 2656, 2706, 4100, 4156, 4166, 4186, 4366, 4386. (Item #: 107904, Ref: 2751848R1) $19.80

Grille Emblem - For International / Farmall tractor models 544, 656, 706, 4100, 4156, 4166, 4186, 4366, 4386, Replaces International OEM number 2751845R1, Height:4", Chrome plated die cast, (Item #: 107905) $47.14

Hood Ornament, Chrome - For tractor models 200, 230, 240, 330, 340, 404, 444, 460, 504, 544, 560, 606, 656, 660, 664, 706, 756, 826, 2404, 2444, 2504, 2544. (Item #: 108483, Ref: 369180R1) $67.00

Hood Ornament, Used - For International tractor models 200, 230, 240, 330, 340, 404, 444, 460, 504, 544, 560, 606, 656, 660, 664, 706, 756, 826, 2404, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2826, Replaces International OEM number 369180R1, Chrome finish, For a new version of this item use Item #: 108483, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435392) $36.01

$Farmall 706 International 706 Decal Set, Model Number Only, Black\Gold, Vinyl$
International 706 Decal Set, Model Number Only, Black/Gold, Vinyl - For International / Farmall tractor model 706, Model number only, (Item #: 100994) $24.40

International, Seat Adjustment Decal, Silver and Black, Vinyl - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 21026, 21206, 21256, 21456, Replaces International OEM number 2751019R1, Vinyl Decal, silver and black, (Item #: 124216) $5.30

Number Emblem, Farmall 706 Diesel - Emblem for 706 Diesel. Replaces 381555R1 (Item #: 103936, Ref: 381555R1) $60.00

Number Emblem, Farmall 706 Gas - Emblem for 706 Gas. Replaces 381555R1. (Item #: 103935, Ref: 381554R1) $42.50

Side Emblem - Says "Farmall". For tractor models 504, 656, 706, 806, 1206. (Item #: 108486, Ref: 377796R1) $88.00

Drive Train

Axle Seal, Rear Outer - This outer seal measured 3.250 inches inside diameter, 4.139 inches outside diameter, .555 inches thickness. For tractor models 1026, 1066, 1086, 1206, 1256, 340, 3688HC, 460, 504, 706, 756, 766, 806, 826, 856, 966, 986, Hydro 100, Hydro 186. (Item #: 128501, Ref: 378077R91) $24.60

Ball Bearing - Constant Mesh and Torque Amplifier Drive Gear - For International / Farmall tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number ST3025, ST697, ST3024, ST3011, 80420C91, 80419C91, 15 Balls and Retainer, Inside Diameter: 75 mm, Outside Diameter: 130 mm, Width: 22 mm, This bearing is splash lubricated, Make sure sump has an adequate level of oil, (Item #: 168435) $29.90

No
Picture
Bearing and Retainer - Kit. For use with R2963 Ring and Pinion Set. For 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, . Replaces OEM numbers 528684R91, 135770C2. (Item #: 167834, Ref: R2964) $1379.01

Cam Pivot Shaft - For tractor models 1066, 1206, 1256, 1456, 1466, 1566, 706, 756, 766, 806, 826, 856. (Item #: 172680, Ref: 380116R3) $28.40

Counter Shaft Bearing Cage, Rear, Used - For International tractor models 706, 756 (s/n 19635-earlier), 806, 856, 1206, 1256, 2706, 2756, 2806, 2856, 21206, 21256, Replaces International OEM nos 380274R11, Rear Bearing Cage, Inside Diameter: 2.133", Outside Diameter: 3.995", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436647) $101.01

Drive Gear Bearing Cage, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 21206, 21256, 21456, Replaces International OEM nos 380253R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432268) $93.01

Drive Gear, Reverse - For tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2806, 3088, 3288, 3488, 3688, 2706, 2756, 2826, 2856, 21026, 21206, 21256, 21456. (Item #: 122677, Ref: 393525R2) $334.00

Gear, 3rd and 4th Sliding - 31 teeth. For tractor models 1206, 1256, 21206, 21256, 2706, (Farmall 2756, 756 serial number up to 17635, IH serial number up to 8424), 2806, (Farmall 2856, 856 serial number up to 27286, IH serial number up to 9492), 706, 806. (Item #: 172447, Ref: 380125R2) $423.00

Gear, Pump Drive - 61 teeth. For tractor models 1026, (1066 gear drive), Hydro 1066, (1086 serial number up to 47999 and 55000 and up), 1206, 1256, 1456, (1466, 1468 gear drive), (1486 serial number up to 25999 and 29150 and up), 21206, 21256, 21456, 2706, 2756, 2806, (2826, 826 hydro or gear drive), 2856, 3088, 3288, 706, 756, (766 gear drive), 786, 806, 856, 886, (966 hydro or gear drive), (986 serial number up to 23999 and 28000 and up), Hydro 100, (Hydro 186 serial number up to 11999). (Item #: 173445, Ref: 380319R1) $268.00

Gear, Reverse Idler - 30 tooth. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 2706, 2756, 2806, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 706, 756, 766, 786, 806, 826, 856, 966, 986. (Item #: 122675, Ref: 393523R1) $308.00

Link Assembly - Upper range transmission selector. For tractor models 1026, 1066, 1206, 1256, 1456D, 1466, 1468, 1566, 1568, 21206, 21256, 21456D, 2706, 2756, 2806, 2826, 2856, 706, 756, 766, 806, 826, 856, 966, Hydro 100. (Item #: 126846, Ref: 393354R91) $26.80

Over Center Lever, Used - For International tractor models Hydro 100, 706, 756, 766 (s/n 7611-earlier), 806, 826, 856, 966 (s/n 14232-earlier), 1026, 1066 (s/n 17320-earlier), 1206, 1256, 1456, 1466 (s/n 12279-earlier), 1468 (s/n 7142-earlier), 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM nos 539624R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434264) $33.01

Parking Gear - 35 teeth, 17 spline. For tractor models Hydro 186, 706, 756, 786, 806, 826, 856, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, Hydro 3488, 3588, 3688, 3788, 6388, 6588, 21026, 21206, 21256, 21456. Replaces 380288R2 138764C1, 138764C2, 380288R1. (Item #: 111278, Ref: 138764C2) $202.00

No
Picture
PTO Drive Gear Kit, 20 Degree - For International / Farmall tractor models 706, 756 (Farmall s/n 17635-earlier and International s/n 8424-earlier), 806, 856 (Farmall s/n 27286-earlier), 1206, 2756 (Farmall s/n 17635-earlier and International s/n 8424-earlier), 2856 (Farmall s/n 27286-earlier), 4100, 4156, 4166, 4186, Replaces International OEM number 380261R1, Kit Includes: IPTO Drive Gear, IPTO Bearing Cage, IPTO Ball Bearing, Inner IPTO Seal, Outer IPTO Seal, IPTO Bearing Cage O-Ring, Spline Count: 17, Tooth Count: 28, Outside Diameter: 1-3/4", (Item #: 176731) $342.00

PTO Lever - For International / Farmall tractor models 706, 806, 1206, 2706, 2806, 21206, Replaces International OEM number 387884R1, Includes knob, (Item #: 128298) $174.01

No
Picture
Range Transmission Cover, Remanufactured, 380314R41 - For International / Farmall tractor models 706, 806, 1206, 2706, 2806, 21206, Replaces International OEM number 380314R41, Includes Filler Tube and Gasket, (Item #: 210980) $121.00

Reverse Idler Gear, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, 21206, 21256, 21456, Replaces International OEM number 393525R2, 380301R1, 393525R1, 1 1/4" Thick Teeth, Teeth: 34 and 21, For a new version of this item use Item #: 122677, (Item #: 422677) $140.01

Reverse Idler Gear, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 393523R1, Teeth: 30 and 21, For a new version of this item use Item #: 122675, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 422675) $100.01

Reverse Shift Fork, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM nos 380308R2, 380308R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430336) $50.01

Ring and Pinion Set - 51 teeth on ring, 13 teeth and 17 spline on shaft. Kit uses late style bearing 528684R91 and bearing retainer 135770C2. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3088, 3288, 3388, 3588, 3688, 706, 766, 786, 806, 826, 856, 886, 966, 986. (Item #: 160584, Ref: 528707R1) $750.00

No
Picture
Seal and Bearing Driver Kit - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, Kit Includes: (1) PTO Seal Driver, (1) PTO Seal Driver, (1) Quill Bearing Driver, (1) Countershaft Driver, (1) Countershaft Bearing Driver, This driver kit will assist you in installing seals and bearings into your International tractor, (Item #: 176771) $389.00

Selector Drive Arm - For tractor models (1206, 2706, 706, 806 all with range transmission). (Item #: 156640, Ref: 382518R1) $41.70

Shift Cam, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 4100, 4156, 4166, 4186, 6388, 6588, 21026, 21206, 21256, 21456, Replaces International OEM nos 380114R22, 380114R21, 430114R20, 430114R19, 430114R18, 430114R17, 430114R16, 430114R15, 430114R14, 430114R13, 430114R12, 430114R11, Speed Transmission, Gear Drive Tractors, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430723) $75.01

Shift Detent Plate - Transmission speed cover, comes with rivets. For tractor models 1066, 1206, 1256, 1456, 1466, 1468, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 706, 756, 766, 806, 826, 856, 966. (Item #: 173010, Ref: 830443) $38.50

Shift Detent Plate - For International / Farmall tractor models 706, 806, 1206, 2706, 2806, 4100, 4156, 4166, 4186, Compatible with International Construction and industrial models 21206, Replaces International OEM number 830438, With Rivets, Cam Is Not Included, (Item #: 110522) $26.20

Shift Fork Assembly, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 4100, 4156, 4166, 4186, 6388, 6588, 21206, 21256, 21456, Replaces International OEM nos 380123R21, Speed Transmission, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498620) $68.01

Shift Fork Shaft, Hi-Lo - For tractor models 1206, 21206, 2706, 706, 806. Replaces 380305R1. (Item #: 112553, Ref: 393407R1) $30.40

Spacer, Countershaft Gears - For International / Farmall tractor models Hydro 100, 706, 756, 766, 786 (1/74-12/80), 806, 826, 856, 886 (1/74-12/80), 886, 966, 986 (1/74-12/79), 1066, 1086 (1/74-12/79), 1206, 1256, 1456, 1466, 1468, 1486 (1/74-12/79), 2706, 2756, 2806, 2856, 3088 (1/81-12/86), 3288 (1/81-12/86), 3388 (1/79-12/81), 3588 (1/79-12/81), 3688 (1/81-12/86), 4100, 4156, 4166, 4186 (1/76-12/79), 6388 (1/81-12/83), 6588 (1/81-12/83), Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number 380126R2, 380126R1, (Item #: 170256) $28.50

TA Gauge #60 - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 21206, 21256, 21456, (Item #: 122052) $65.37

TA Gauge #600 - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 2706, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 21256, 21456, (Item #: 122053) $65.37

Torque Amplifier - Remanufactured torque amplifier has 3 direct drive discs and 2 anti-free wheel discs. Does not include driven gear. Remanufactured torque amplifiers are made and inspected to specification. Every part is examined, measured and tested to assure compliance. ** A refundable $150 core charge is added to the cost on this item. ** Core return tags are mailed with part. Core credit issued after inspection of returned core. For tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486. (Item #: 1251698C92) $1090.56

Torque Amplifier - Remanufactured, match with driven gear (380255R1 53 tooth, 20 degree) NOT included in assembly. For tractor models 2706, 2756, 706, 806. Core Charge: $175 (Item #: 204455, Ref: 380237-R) $1389.01

Torque Amplifier Elimination Kit - Torque Amplifier Elimination Kit. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 21256, 21456, 2706, 2826, 2856, 3088, 3288, 3688, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986. Refundable $225 core charge will be added to your order. Order Gasket set if needed as part number 79020-7. (Item #: 111248, Ref: 830431) $523.00

Torque Amplifier Eliminator Kit - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, Compatible with International Construction and industrial models 21206, 21256, 21456, Includes: Elimination Shaft, front housing, plugs, O-ring, bushing, gear used for spacer, MCV Pump, Gasket Set, Speed transmission main shaft also required if existing main shaft is not drilled through the center, Universal hydraulic oil (2.5 gallon) use Item #: 124173, (Item #: 111247) $1159.01

Torque Amplifier Gasket Kit - For: 706, 756, 766, 786, 806, 826, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486. (Item #: 110289, Ref: 79020) $78.00

Torque Amplifier Gasket Kit - Complete gasket, o-ring and seal package. For units with spring activated brakes. For tractor models hydro 100, Hydro 186, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3388. (Item #: 77721) $98.10

Torque Amplifier Gear, Constant Mesh - For tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 6388, 6588, 21206, 21256, 21456. (Item #: 110264, Ref: 382349R1) $179.00

No
Picture
Torque Amplifier Heavy Duty, Remanufactured - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, Compatible with International Construction and industrial models 21206, 21256, 21456, Direct Drive Disc: 4, Anti-Free Wheel (TA) Disc: 2, Upper gear with 22 teeth, lower gear with 51 teeth, Universal hydraulic oil (2.5 gallon) use Item #: 124173, Additional Handling and Oversize Fees Apply To This Item, (Item #: 204241) $1030.00

Torque Amplifier Kit, Remanufactured - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, Compatible with International Construction and industrial models 21206, 21256, 21456, Iincludes: Torqure Amplifier, Gasket, Quill, MCV Pump, Lower Gear, Upper Gear: 22 tooth and 25 degree, Direct Drive Disc: 3, Anti-Free Wheel (TA) Disc: 2, Lower Gear: 51 tooth and 25 degree, Universal hydraulic oil (2.5 gallon) use Item #: 124173, (Item #: 204451) $1805.52

Torque Amplifier, Remanufactured - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, Compatible with International Construction and industrial models 21206, 21256, 21456, Direct Drive Disc: 3, Anti-Free Wheel (TA) Disc: 2, Universal hydraulic oil (2.5 gallon) use Item #: 124173, (Item #: 204453) $1030.00

Transmission Brake Lever Assembly - For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 1586, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3788, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 100. Replaces 384311R11, 384311R21. (Item #: 111367, Ref: 1981317C1) $68.00

Transmission Brake Operating Rod - For tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788, 2706, 2756, 2806, 2826, 2856, 21206, 21256, 21456. (Item #: 172774, Ref: 384307R1) $95.00

Transmission Brake Pad and Screw - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2806, 2826, 2856, 3388, 3588, 3788, 4100, 4156, 4166, 21206, 21256, (Item #: 168453) $27.00

Transmission Countershaft - Left hand thread. For tractor models 3088, 3288, 3788, 706, 1586. (Item #: 113419, Ref: 148951C1) $294.00

Transmission Countershaft Nut - For International / Farmall tractor models 706 (756), 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 148952C1, 148952C2, LH Thread, (Item #: 113418) $20.10

No
Picture
Transmission Countershaft Nut - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 4156, 4166, 4186, 6388, 6588, 6788, Replaces International OEM number 380092R1, Original style with Right Hand threads, (Item #: 176734) $30.90

Electrical System

Alternator - Alternator, 12 volt, 61 amp, external regulator, 2 terminal 12 o-clock position. For 100, 1000, 105, 1066, 110, 1100, 1110, 115, 120, 1200, 1206, 1256, 1275, 1300, 1456, 1466, 1468, 200, 205, 210, 21206, 21256, 21456, 222, 225, 23, 230, 2444, 2544, 2606, 2656, 2706, 275, 2756, 2806, 2856, 3110, 315, 3410, 3444, 3514, 3516, 3616, 375, 3800, 3850, 403, 4100, 4300, 444, 503, 504, 544, 601, 602, 606, 616, 622, 656, 706, 756, 766, 806, 815, 856, 915, 966, HYDRO 100. (Item #: 113606, Ref: 1100883) $126.00

Alternator - 12 volt, 55 amp. For tractor models (105, 205 1968 to 1970 with 153 gas), (315 1968 to 1970 with BD-331), (403 1968 to 1970 with 301 diesel/263 gas), (503 1968 to 1969 with 282 gas/301 diesel), (615 1971 with 263 gas). Replaces 1100805, 1100883, 1100791, 1100778, 1100720. (Item #: 113606, Ref: ADR0231) $126.00

Battery Tray - Left Hand - For International / Farmall tractor models 706, 806, 1206, Replaces International OEM number 380409R91, 403529R1, Fits left hand side, Restoration quality, Width: 4-1/4", For use with battery group 3EH, Comes primered (color may vary). Prior to painting check fitment, For Battery Tray - Right Hand use Item #: 104017, (Item #: 113443) $128.57

Battery Tray - Right Hand - For International / Farmall tractor models 706, 806, 1206, Replaces International OEM number 384491R91, 403530R1, Fits right hand side, Restoration quality, Width: 4-1/4", For use with battery group 3EH, Comes primered (color may vary). Prior to painting check fitment, For Battery Tray - Left Hand use Item #: 104016, (Item #: 113442) $128.57

Blower Motor - This Blower Motor is 4 wire, 12 volt 3/8 inch x 4 1/4 inch shaft, 3 speed, body length 4 1/8 inches, body diameter 3 1/2 inches. It is used on Tractors: 656, 706, 756, 766, 786, 806, 856, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 2656, 2706, 2756, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 4568, 4586, 4786, Hydro 100, Hydro 186. Combine: 715, 815, 915, 1420, 1440, 1460, 1470, 1480. Windrower: 4000, 5000, 5500, 8830. Replaces 539053R3, 539053R2, 539053R1, 1987442C1, 1987399C3, 175577C2, 175577C1. (Item #: 108656, Ref: 72162089) $78.00

Distributor Cap - Clip type, services 6 cylinder tractors with International distributors. For tractor models 2606, 2706, 2806, 460, 560, 606, 656, 660, 666, 686, 706, 756, 806, 826, 856, Hydro 70, Hydro 86. (Item #: 105298, Ref: 368062R1) $11.00

Distributor Condenser - Services IH distributors 1951 to 1962 also services J4 magnetos. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 300, 330, 340, 350, 400, 404, 450, 460, 504, 560, 606, 660, 706, 806, A, B, C, Cub, Cub 154, Cub 185 Lo-Boy, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA. (Item #: 111108, Ref: 353903R1) $6.60

Distributor Dust Cover - Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: 424, 444, 450, W450, 460, 504, 560, 600, 606, 650, 656, 660, 706, 756, 806, 826, 856, 3514, 3616. Replaces 384831R91. (Item #: 107074, Ref: 353900R11) $16.10

Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $9.60

Distributor Insulating Terminal Washer - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a Distributor Insulating Terminal Washer. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Item #: 118474, Ref: 251538R1) $6.40

Distributor, Remanufactured, 368051R - For International / Farmall tractor models 460, 560, 606, 656, 660, 706, 756, 806, 826, 856, 2606, 2656, 2706, 2806, 2856, Replaces International OEM number 368051R, Includes new distributor cap, points, condenser, and all other parts needed for a thorough rebuilt unit, (Item #: 203534) $468.01

Distributor Terminal Screw - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a zinc plated Terminal Screw. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. Replaces International part number 353907R1 (Item #: 118472, Ref: 353907R1) $7.50

Distributor Terminal Screw Insulator - Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a spring anchor terminal insulator. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Item #: 118473, Ref: 353906R1) $7.20

Fuse Holder Kit - For Cub, Cub Lo-Boy, Hydro 70, Hydro 86, Hydro 100, 140, 404, 424, 444, 454, 464, 504, 574, 606, 656, 666, 674, 686, 706, 756, 766, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2400A, 2404, 2424, 2444, 4500A, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 1500, 21026, 21206, 21256, 21456. Replacement Fuse Holder Kit. Mounts on 5/8 inch diameter hole in instrument panel. 2 spade connectors. (Item #: 112273, Ref: 376852R91) $10.40

Fuse Housing - Reproduction of original Fuse Housing. Comes as pictured. For tractor models (Super A, Super AV, A1 all with magneto), C, Super C, 200, (H late with regulator under tank), Super H, HV, (M with regulator on post), (Super M 1953-1954), (Super M diesel), Super MTA, W4, OS4, O4, 100, 130, 400, 450. Replaces: 365515R91, 376852R91, 354232R91 (Item #: 112273, Ref: 376852R91) $10.40

Glow Plug - For tractor models 504, 706, 656, 560, 660, 2504, 2706, 2656, 403, 405, (715 serial number 23001 and up) with engines D188, D236, D282, D301. Replaces 343894R1, 343977R1. (Item #: 111187, Ref: 304131R3) $16.50

Glow Plug - Sold individually. 0.197 inch tip diameter, 5 inch overall length and 0.311 inch outside diameter where it slides into the head. For combines: 101, 151, 181, 315, 403, 453, 503, 715. For Tractors TD6, TD9, 340, 460, 504, 560, 606, 656, 660, 706, 3514, 3616, 3800, 3850, TD340. Replaces 304131R1, 343977R1, 343894R1, 304131R3, 304131R2. (Item #: 111187, Ref: 304131R3) $16.50

Glow Plug Meter Gauge - For International / Farmall tractor models 340, 460, 504, 560, 606, 656, 660, 706, 2606, 2656, 2706, Compatible with International Combine (s) 101, 151, 181, 403, 453, 503, 615, 715, Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD340, 2500, 2504, 3514, 3616, Replaces International OEM number 370380R91, 370380R92, 378352R91, 404740R1, (Item #: 121659) $45.20

Key Switch, 2 Terminal - With keys. For tractor models (Cub serial number 224401 to 239826 with battery ignition), (Cub Lo-Boy from serial number 18701 and up with battery ignition), Cub Cadet 100, 100, (140 serial number 26801 to 45000), 240, 330, 340, 350, 404, 2404, 424, 2424, 444, 2444, 450, W450, 460, 504, 544, 560, 606, 650, 656, 600, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. Replaces 370375R91, 379594R92, 403562R2. (Item #: 113393, Ref: 366313R91) $13.70

Neutral Starting Switch - This neutral starting switch has an overall length of 2.575 in, with 2 spades, and 5/8-32 thread. It is used on International Models: Cub, 806, 1066, 2656, Hydro 100, Hydro 70, 2706, 2756, 2806, 2826, 5500, Hydro 84, Hydro 86, Hydro 186, 140, 154, 185, 616, 622, 544, 574, 656, 664, 666, 706, 756, 766, 826, 856, 966, 1026, 1206, 385, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 484, 485, 2544, 584, 585, 4100, 4156, 4166, 684, 685, 686, 784, 785, 786, 884, 885, 886, 986, 1086, 1486, 1586, 21456, 3388, 260A, 258, 278, 5088, 21256, 3588, 3688, 21206, 5288, 3088, 3788, 2400, 3488, 6588, 3288, 6388, 5488, 248, 6788. Verify OEM number or measurements before ordering. Many of these models used more than on switch. Replaces 10A25817, 12169C1, 16169C2, 12169C3, 2122233SM, 22-228, 22-642, 248659, 30-318739, 35A12407, 382728R91, 5021522YP, 532682R1, 70248659, 72161934, 83954C91, AH98872 (Item #: 164031, Ref: AH98872) $30.00

Point Set - For International / Farmall tractor models 504, 606, 660, 706, 806, 2504, 2606, 2706, 2806, Replaces International OEM number 372951R91, 21A163, 1962 and later, For distributor with a gap of .020", (Item #: 111107) $13.50

Solenoid - Starter solenoid assembly, services Delco starters: 1113034, 1113198, 1113685, 1113053, 1113201, 1113690, 1113176, 1113203, 1113197, 1113647. Hydro 70, 84, 86~ 400, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 1456D, 1466, 1468, 1566, 2400A, 25 For 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21206, 21256, 21456, 2400A, 2500A, 2544, 2656, 2706, 2756, 2826, 2856, 400, 4166, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 756, 766, 826, 84, 856, 86, 966, HYDRO 70, HYDRO 84, HYDRO 86. Replaces 585618C91, 65479C2 (Item #: 105672, Ref: 1115510) $30.00

No
Picture
Starter - For tractor models (460 Gas, 1958 to 1959), (460, 560, 660, 606, 706 Gas, 1960 to 1967), (T340, 3515 Gas, 1958 to 1959 and 1965 to 1967), (T6 Crawler 1958 to 1963), (F504 Gas 1961 to 1965), (F656 Gas 1965 to 1966) (3616 1965). REBUILT Starter. 12 Volt. Also replaces 1107229, 1107744. (Item #: 203200, Ref: 1107720) $360.50

Starter - Delco Style (4235), Remanufactured, Delco Remy, 1108334 - For International / Farmall tractor models 706, 756, 766, 806, 856, 2756, 2806, 2856 (all gas), Replaces Delco Remy manufacturer number 1108334, 1109359, Replaces manufacturer number 140-746B, 4235, Delco Style, Voltage: 12, Rotation: Counter Clockwise, Teeth: 10, For Starter Drive use Item #: 110771, (Item #: 203451) $484.80

No
Picture
Starter - Delco Style (4325), Remanufactured, A481102Z, Delco Remy, 1107275 - For International / Farmall tractor models 706, 806, 2806, Replaces Case OEM number A481102Z, Replaces Delco Remy manufacturer number 1107275, 323-638, Replaces manufacturer number 4325, 140-749, 91-01-3993, Delco Style, Voltage: 12, Rotation: Counter Clockwise, Teeth: 9, (Item #: 203462) $331.79

No
Picture
Starter - Delco Style DD (3933) - For International / Farmall tractor models 706, 756, 2756 (all with D310), Compatible with International Harvester (s) 616, 622, Replaces International OEM number 395758R91, Replaces Delco Remy manufacturer number 1113197, Replaces manufacturer number 141-124, 3933, 91-01-4046, Delco Style Direct Drive, Voltage: 12, Rotation: Counter Clockwise, Teeth: 10, For diesel applications, For a Remanufactured version of this sku use Item #: 203146, (Item #: 160372) $497.00

No
Picture
Starter - Delco Style DD (3933), Remanufactured, Delco Remy, 1113197, 395758R91 - For International / Farmall tractor models 706, 756, 2756 (all with D310), Compatible with International Harvester (s) 616, 622, Replaces International OEM number 395758R91, Replaces Delco Remy manufacturer number 1113197, Replaces manufacturer number 141-124, 3933, 91-01-4046, Delco Style: Direct Drive, Voltage: 12, Rotation: Counter Clockwise, Teeth: 10, For a New version of this sku use Item #: 160372, (Item #: 203146) $450.10

Starter Drive - Starter drive, services Delco starters: 1107854, 1108343, 1108691, 1109360, 1108334, 1108344, 1109252, 1113201. For tractor models Hydro 70, Hydro 86, Hydro 100, 504, 594, 656, 666, 686, 706, 756, 766, 826, 856, 966, 1066, 1466, 1468, 2504, 2656, 2706, 2756, 282 For 100, 1066, 1466, 1468, 2504, 2544, 2656, 2706, 2756, 2826, 2856, 504, 594, 656, 666, 686, 706, 756, 766, 826, 856, 86, 966, HYDRO 100, HYDRO 70, HYDRO 86. (Item #: 110771, Ref: 1877347) $26.30

Starter Drive - Starter drive, services Delco starters: 1108640, 1113176, 1113439, 1113649, 1108646, 1113197, 1113440, 1113684, 1113034, 1113398, 1113489, 1113685, 1113053. 10 teeth For 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 186, 21206, 21256, 21456, 2706, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 400, 4166, 4186, 450, 6388, 650, 6588, 660, 6788, 706, 756, 766, 786, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186 (Item #: 110778, Ref: 1877350) $32.70

Starter Drive - Starter drive, services Delco starters: 1107228, 1107275, 1107720, 1108642, 1107229, 1107543, 1107744. For tractor models 404, 460, 504, 560, 606, 656, 660, 706, 2404, 2504, 2606, 2656, 2706. 9 teeth. (Item #: 110776, Ref: 1939109) $38.70

Starter Drive - Replaces; 1877350, 1948877, 1933838, 800965. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21456, 21256, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 350, 3588, 3688, 3788, 4166, 4186, 450, 560, 6388, 6588, 660, 6788, 706, 756, 766, 786, 806, 815, 826, 856, 886, 915, 966, 986, Hydro 100, Hydro 186, Hydro 3488. With spiral shaft. (Item #: 117546, Ref: 1651487C1) $34.40

Starter Drive - Delco Style - Ratchet Type - For International / Farmall tractor models Hydro 100, Hydro 186, W450, 350, 350U, 400, 450, 460, 560, 660, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2606, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 4166, 4186, 6388, 6588, 6788, Compatible with International Combine (s) 815, 915, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models 500, Replaces International manufacturer number 1107341, 1108640, 1108646, 1107544, 1108659, 1113034, 1113053, 1113176, 1113197, 1113685, 1113434, 1113440, 1113398, 1113409, 1113684, 1113642, 1113647, 1113439, 1113432, 1113446, 1113489, Replaces Delco Remy Starter Drive number 1877350, Replaces Delco Remy Starter number 1108640, 1108646, 1108336, 1109433, 1107390, 1109425, 10455339, 10455354, 10465416, 10465430, 1107341, 1998392, 1998290, 1998300, 10455323, 1107532, 1998332, 1998375, 1107873, 1109260, 1109271, 1107544, 1108659, 1107779, 1113034, 1113053, 1113176, 1113149, 1113197, 1113685, 1113434, 1113440, 1113398, 1113409, 1113684, 1113642, 1113647, 1113439, 1113432, 1113446, 1113489, 1108475, 1113071, 1113117, 1113118, 10455320, Delco Style, Teeth: 10, Outer Diameter: 39.5mm, Inner Diameter: 14.3mm, Rotation: Counter Clockwise, Overall Length: 96.5mm, Clutch Type: Ratchet, Splines: 3, (Item #: 111104) $33.90

Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01

No
Picture
Starter, Rebuilt - A rebuilt Delco start that is 12 volts, counter clockwise rotation and has a 10 tooth starter drive for (544, 2544, 656, 2656, all Gas with ST, 1967 to 1973), (3514, 3616 Gas 1967 to 1973), (504, 3514 Gas 1969 to 1974), (C-200, 263 Gas 1968 to 1970), (3514 with C-173 Engine with ST 1969 to 1970), (915 Gas Combines 1969 to 1974), (666 with ST 1972 to 1974), (F-686 AG Tractor 1977 to 1979), (706 Gas 1967 to 1968), (766 Gas 1967 to 1968). REBUILT Starter. 12 Volt). Replaces 1108343. (Item #: 203453, Ref: TS-1230) $359.57

Starter Switch - Momentary Push Button Ignition Switch. Rubber boot covers push button, 2 screw type terminals, used extensively on I.H. equipment. Serves as starting, horn or reverse lock out switch. Used on various combines, windrowers, balers, cotton pickers, hay conditioners and grain platforms. Also used on Tractors: IHC: Fits: 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 560, 606, 656, 660, 706, 806, 4100, 4156, 4166, 4186; Industrial: 1206, 2656; Crawler: T4, T5, TD5. Replaces 366317R91, 366317R93GV (Item #: 112232, Ref: 366317R93) $7.40

Starter, Used - For International tractor models 706, 2706, 12 Volt, Lester No 3709, Farmall s/n 37236-earlier, International s/n 5273-earlier, Diesel, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429631) $204.01

Starting Button - Attaches with eyelets and screws. For tractor models 240, 300, 330, 340, 350, 400, 404, 424, 444, 460, 504, 560, 606, 656, 660, 706, 806, 1206, 4100, 4156, 4166, 4186. (Item #: 112232, Ref: A36948) $7.40

Starting Button - Attaches with spade terminals. For tractor models 1026, 385, 395, 444, 454, 464, 484, 485, 495, 544, 574, 584, 585, 595, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, Hydro 70, Hydro 86, Hydro 100, Hydro 186, 2400A, 2500A, 3088, 3288, 3388, 3488, 3588. Replaces IHS800. (Item #: 112232, Ref: 397940R93) $7.40

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Item #: 121141, Ref: R7994) $13.40

Tune-up Kit - Tune-up Kit for an IH Distributor, 1963 and later. 6 cylinder engine (C221, C263, C291, C301). For tractor models 460, 560, 656, 660, 706, Hydro 70, Hydro 86, 666, 686, 756, 766, 806, 826, 856. With 18 mm, 1/2 inch reach, 7/8 inch spark plugs (AL 386), points, condenser, rotor and gap gauge. Verify correct spark plug size and type. (Item #: 111813, Ref: IHTK3) $34.30

Tune-up Kit, Basic - Kit contains: rotor, condenser, points and proper point gap gauge. For tractor models Cub, Cub Lo-Boy, 140, 340, Hydro 70, Hydro 86, 460, 560, 606, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2706, 2756, 2806, 2826, 2856. All with 4 or 6 cylinder gas engines and battery ignition, 1963 and later with IH distributor (not for Prestolite). YTO-ATK9BIR (Item #: 105296, Ref: ATK9BIR) $19.70

Voltage Regulator, 12 Volt - Regulator, 12 volt, for tractors with alternators. Models: 664, 706, 806, 826, 1206, 2706, 2806, 21206. For 1206, 21206, 2706, 2806, 664, 706, 806 (Item #: 105289, Ref: 1119515) $20.50

Voltage Regulator, 12 Volt - Flat Mount Voltage Regulator. For tractor models 2404, 2424, 2504, 2606, 2656, 2706, 2806, 404, 424, 504, 606, 656, 706, 806. Replaces Delco 1119000, 35A5137 1118897, 121579C1, 375055R1. (Item #: 105521, Ref: 121579C1) $86.00

Engine Bearings

No
Picture
Cam Bearing Set - Camshaft bearing kit, 4 bearings. Individual bearings not available. For C291 CID gas 6 cylinder. For engine in tractors 666, 686, 706, 756, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (Item #: 106671, Ref: CBK-H221) $36.10

Camshaft Bearing Kit - 4 bearings. For tractor models 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. All with either C221, C263, C291, C301, D236, D282 6 cylinder engines. Can Be used on C157, C175 and C200 Engines by also purchasing 398019R1 front cam bearing separately. Not for German Diesel Engines. Replaces 130476R91, 130476R92, 130476R93, 70131R1, 70132R1, 70259R2, 70260R1, 70260R2, 70261R2, 70262R1, 71326R1 (Item #: 106671, Ref: CBK-H221) $36.10

Connecting Rod Bearing - .010" Oversize - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310 (Diesel, 6 cylinder), D358 (Diesel, 6 cylinder), Replaces International OEM number 376666R11, Sold in complete sets, Bearing Size: .010" Oversize, For Standard connecting rod bearing use Item #: 106497, (Item #: 106495) $208.00

Connecting Rod Bearing - .020" Oversize - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310 (Diesel, 6 cylinder), D358 (Diesel, 6 cylinder), Replaces International OEM number 3056879R11, Sold in complete sets, Bearing Size: .020" Oversize, 1.264" width, RH notch, For Standard connecting rod bearing use Item #: 106497, (Item #: 106496) $208.00

Connecting Rod Bearing - .030" Oversize - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310 (Diesel, 6 cylinder), D358 (Diesel, 6 cylinder), Replaces International OEM number 3055781R11, Sold in complete sets, Bearing Size: .030" Oversize, 1.264" width, RH notch, For Standard connecting rod bearing use Item #: 106496, (Item #: 106497) $7.00

Connecting Rod Bearing Set - .020" - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Replaces International OEM number 376667R91, Size: .020", (Item #: 184148) $197.00

Connecting Rod Bearing - Standard - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310 (Diesel, 6 cylinder), D358 (Diesel, 6 cylinder), Replaces International OEM number 3055351R91, Sold in complete sets, Bearing Size: Standard, 1.264" width, RH notch, For .010" connecting rod bearing use Item #: 106497, (Item #: 106494) $208.00

IPTO Overhaul Kit - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 806, 826, 856, 886 (s/n 16999-earlier), 966, 986 (s/n 23999-earlier), 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486 (s/n 25999-earlier), 2706, 2756, 2806, 2826, 2856, 3388 (s/n 10384-earlier), 21026, 21206, 21256, 21456, Replaces International OEM number 977721, Contains gaskets, o-rings, seals, clutch pack, Does not include brake pistons, For units with spring activated brakes, (Item #: 112178) $153.00

IPTO Seal and Bushing Kit - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2806, 2826, 2856, 3088, 3288, 3688, 21256, 21456 (All Less TA), Replaces International OEM number 535209R91, 535208R91, 22419R1, 22414R1, 384185R1, Contents: (1) 535208R91 IPTO Rear Seal, (1) 535209R91 IPTO Front Seal, (1) 22419R1 TA Casting O-Ring, (1) 22414R1 IPTO Bearing Cage O-Ring, and (1) 384185R1 IPTO Bronze Bushing, (Item #: 149801) $49.80

Main Bearings - .010" Oversize - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310, D358, Replaces International OEM number 382360R91, 332276R91, 376670R91, 376673R91, Sold in complete set, Bearing Size: .010" Oversize, For Standard main bearing use Item #: 106619, (Item #: 106617) $111.00

Main Bearings - .020" Oversize - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310, D358, Replaces International OEM number 376683R91, 332279R91, 376686R91, 376692R91, 382361R91, Sold in complete set, Bearing Size: .020" oversize, For Standard main bearing use Item #: 106619, (Item #: 106618) $246.00

Main Bearings - .030" Oversize - Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Compatible with International Engine (s) D310, D358, Replaces International OEM number 382358R91, 332270R91, 367288R91, 367291R91, 367297R91, Sold in complete set, Bearing Size: .030" Oversize, For Standard main bearing use Item #: 106618, (Item #: 106619) $185.00

Main Bearing Set - For tractor models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID Diesel 6-cylinder engine. Cupped head piston). Models 786, 826, 886 Chassis serial number 14472 and up, 2826, 3088 to engine serial number 121247, 3288 to engine serial number 111090. (D358 CID Diesel 6-cylinder engine. Cupped head piston). If other than standard, specify size in comments (.010, .020). (Item #: MBK310D) $142.00

Main Bearing Set, .010 - .010 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 376679R91, 332276R91, 376670R91, 376673R91, YTO MBK221-010 (Item #: 106613, Ref: MBK221-010) $120.00

Main Bearing Set, .010 - Main Bearing Kit (.010 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. Replaces 376670R91, 332276R91, 376673R91, 376679R91 (Item #: 167378) $109.00

Main Bearing Set, .020 - .020 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 376683R91, 332279R91, 376686R91, 376692R91, YTO MBK221-020 (Item #: 106614, Ref: MBK221-020) $145.00

Main Bearing Set, .020 - Main Bearing Kit (.020 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. (Item #: 190746) $217.00

Main Bearing Set - .030 - 0.030 inch main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used for the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 382358R91, 332270R91, 367291R91, 367297R91 (Item #: 106615) $185.00

Main Bearing Set, .030 - Main Bearing Kit (.030 over) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. (Item #: 167101) $70.00

Main Bearing Set, Standard - Standard main bearings with 3-3/4 inch thrust flange. Verify flange size before ordering. Used the following IH engines C263, C221, C236, C263, C291, D236, D301, D282, DT282. Replaces 382357R91: 1-367276R91, 1-367282R91, 1-367279R91 and 1-367285R91 YTO MBK221 (Item #: 106612, Ref: MBK221) $101.00

Main Bearing Set, Standard - Main Bearing Kit (standard) with 4 inch thrust flange. Used on Hydro 70, Hydro 86, 460 (s/n 35093-later), 560 (s/n 44822-71777), 606 (s/n 13754-16620), 656, 660 (s/n 44822-71777), 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616 (s/n 13754-16620), 205, 303, 315, 403, 403 (s/n 44821-later), 453, 503, 715, 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, T6 (s/n 56634-later), 3800, 3850. Compatible with International Engines: C221, C263, C291, C301, D236, D282, DT282, D301. Replaces 382357R91, YTO MBK221A (Item #: 185622, Ref: MBK221A) $98.00

PTO Overhaul Kit - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 806, 826, 856, 886 (s/n 16999-earlier), 966, 986 (s/n 23999-earlier), 1026, 1066, 1086 (single speed s/n 25999-earlier and dual speed s/n 47999-earlier), 1206, 1256, 1456, 1466, 1468, 1486 (s/n 25999-earlier), 2706, 2756, 2806, 2826, 2856, 3388 (s/n 10384-earlier), 21026, 21206, 21256, 21456, Replaces International OEM number 977722, 877721, For units with spring activated brakes, (Item #: 112250) $225.00

No
Picture
PTO Shaft Seal - For International / Farmall tractor models 544, 656, 664, 666, 686, 706, 756, 766, 786, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486 (prior to s/n 25999), 2544, 2656, 2756, 2826, 3088, 3288, 3388, 3688, 6388, 21206, 21256, 21456, Replaces International OEM number 381480R1, 472258, 634036, CR13569, (Item #: 111619) $6.40

Range Cover Gasket - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 380315R2, 380315R1, Length: 14-3/8", Width: 8", (Item #: 166208) $8.20

Release Bearing Carrier - For International / Farmall tractor models Super MTA, Super W6, W6, 400, 560, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 380109R1, 69789C1, I.D.: 2.500", O.D.: 4.154", Thickness: .865", (Item #: 112251) $115.00

Reverse Drive Cover Gasket - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, Replaces OEM number 385757R3, 385757R2, 385757R1, 69681C1, (Item #: 164387) $10.00

Rod Bearing - Rod Bearing in .002. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.372 inches. Replaces YTO CRK221-002 and 367632R11. Sold individually. (Item #: 106486) $12.20

Rod Bearing - Rod Bearing in 0.010. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.364 inches. Replaces YTO CRK221-010 and 376666R11. Sold individually. (Item #: 106487) $7.50

Rod Bearing - Rod Bearing in .020. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.354 inches. Replaces YTO CRK221-020 and 376668R11. Sold individually. (Item #: 106488) $9.80

Rod Bearing - Rod Bearing in .030. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Journal measures 2.344 inches. Replaces YTO CRK221-030 and 367631R11. Sold individually. (Item #: 106489) $12.20

Rod Bearing - Rod Bearing in standard. For model 460 (221 CID Gas 6-cylinder engine) and models 560, 660, 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons) and models 460 Engine serial number 5611 to serial number 13753. (D236 CID Diesel 6-cylinder engine. Cupped head piston). Standard journal measures 2.374 inches. Replaces YTO CRK221-STD and 367408R11. Sold individually. (Item #: 106485) $11.10

Rod Bearing Standard - This is a single rod bearing for International Engines: D155, D179, D206, D239, D246, D268, D310, D358. Replaces 3055218R1. Order on for each connecting rod. (Item #: 191598, Ref: CRK239D) $7.00

No
Picture
Speed Transmission Cover Gasket - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3788, 4186, 21026, 21256, 21456, Replaces International OEM number 380112R13, (Item #: 176726, Ref: 380112R13) $13.30

No
Picture
Transmission Gear Shift Cover Gasket - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, Replaces International OEM number 380112R2, (Item #: 173861) $7.40

Engine Gaskets

Conversion Gasket Set - For International / Farmall tractor models 560, 606, 656, 660, 706, 2606, 2656, 2706, 3616, Compatible with International Combine (s) 101, 151, 181, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD6 (62 Series), TD9B, Compatible with International Engine (s) D236, D282, DT282, D301, (Item #: 168998) $83.00

Front Crank Seal - Diesel - Front seal package contains seal and wear ring. For tractor models with diesel engines: 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: 162141, Ref: 3228133R93) $60.00

Front Crankshaft Seal - This front crankshaft seal has a 2.375 inch Inside Diameter, a 3.355 inch Outside Diameter and is 0.475 inch wide. It Fits: 2400, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 4500B, 454, 544, 574, 666, 674, 686, 756, 766, 806, 826, 856 (Gas and LP), 340, 504 (Diesel), 350 (W/ GD193 Diesel), 3514 (Diesel, with D188 engine), 3616, 460, 560, 606, 656, 660 (Gas, LP and Diesel, when used as a front crankshaft seal), 706 (Gas, LP and Diesel, when used as a front crankshaft seal, except German Diesel), Hydro 70, Hydro 86 (Gas and LP). Replaces: 117568H1, 119020H1, 129370H1, 273573R91, 317549R91, 357672R91, 391976R91, 606750C91 (Item #: 106642, Ref: 834831M1) $12.00

Full Gasket Set - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Compatible with International Engine (s) C221 (6 cylinder), C263 (6 cylinder), C291 (6 cylinder), C301 (6 cylinder), Includes crankshaft seals, (Item #: 186637) $154.00

No
Picture
Full Gasket Set - For 560, 656, 660, 706 with D282 Diesel Engine (Item #: 106721, Ref: FS3843) $201.00

Gasket set, full - For gas C221, C263, C291 and C301 6 cylinder engines. Complete gasket set with crankshaft seals (where required). 1 used per engine. (Item #: GK7799S) $155.94

Gasket Set - Lower - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886 (chassis s/n 14472-later), 955, 956, 1055, 1056, 2706, 2756, 2826, 3088 (s/n 121247-earlier), 3288 (s/n 111090-earlier), Compatible with International Engine (s) D310, D358, Replaces International OEM number 1967013C1, 3136817R99, 1967012C1, (Item #: 160290) $81.00

Head Gasket - For International / Farmall tractor models 460, 560, 606, 656, 706, 2706, 3616, Compatible with International Engine (s) D236 (Diesel), D282 (Diesel), Replaces International OEM number 134400A1, (Item #: 128679) $118.00

Head Gasket Set - For C291 or C301 CID gas 6 cylinder engines in tractors: 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (upper gasket set with head gasket). (Item #: 106689, Ref: VGK7799S) $99.00

Head Gasket Set - For 282 CID 6-cyl Diesel Engines in: 2606, 2656, 2706, 460, 560, 606, 656, 660, 706. (Upper gasket set with head gasket). (Item #: 106690, Ref: VGK8334SB) $130.00

Head Gasket Set - Used on International D301, UD236, UD282, UDT282, D236, D282, DT282 6 Cylinder Engines. It includes nozzle and precup gaskets. Replaces 134403A1 (Item #: 106690, Ref: HS3843) $130.00

No
Picture
Head Gasket Set - For tractor models 706, 756 with D310 Diesel Engine. (Item #: 106691, Ref: HS3558) $125.00

Lower Gasket - LOWER GASKET. For 2706, 2756, 2826, 3088, 3288, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: CS6310D) $127.77

No
Picture
Lower Gasket Set - For tractor models 560, 656, 660, 706 with C263 gas engine. (Item #: 106725, Ref: CS3153) $67.18

Lower Gasket Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 3088, 3288, Replaces International OEM number 1967012C1, Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set, Engines: D310, D358, (Item #: 106728) $100.00

Oil Pan Gasket - For tractor models 2706, 2756, 2826, 3088, 3288, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: 106707, Ref: 3055987R3) $22.20

Oil Pan Gasket - Oil Pan Gasket. For C291 CID gas 6 cylinder engine in tractors 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2826, 2856, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. (Item #: 106706, Ref: 369984R1) $10.30

Push Rod Cover Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Construction and industrial models 3600A, 3800, 3850, Compatible with International Engine (s) C221, C263, C291, C301, D236, D282, Replaces International OEM number 369982R1, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128736) $15.10

Rear Crankshaft Seal Kit - Fits: (Hydro 70, Hydro 86, 2544, 2756, 2806, 2826, 2856, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856 all gas, LP), (2504, 340, 504 all diesel (no German diesels), (2606, 2656, 2706, 460, 560, 606, 656, 660, 706 all gas, LP, diesel (no German diesels), Constructall, Industrial: 2500 (diesel (no German diesels), (Industrial: 100C, 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62 all gas, LP), (150, H25B, H50A, H50B, H50C, TD6-62, TD9B all diesel (no German diesels), (3514, 3616, 3800, 3850, H30B all gas, LP, diesel (no German diesels). Fits following engines/power units: C-157, C-175, C-200, C-221, C-263, C-282, C-291, C-301, D-188, D-236, D-282, D-301. 4.568 inch outside diameter, 4.000 inch inside diameter, 0.375 inch wide, set includes: 1 piece lip seal, rear seal housing gasket, and 2 plugs. Replaces: 308406R1, 368568R1, 374006R91, 393180R91, 403066R91, 538983R1. (Item #: 106656, Ref: IHS2411) $21.30

Seal Kit - Seal package, for power disc brake piston housing. Tractors: Hydro 100, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1466, 1468, also industrial versions above tractors. Replaces 406726R91. For 1026, 1066, 1206, 1256, 1466, 1468, 706, 756, 766, 826, 856, 966, HYDRO 100 (Item #: 105423, Ref: 66487C91) $20.70

No
Picture
Upper Gasket - UPPER GASKET. For 2706, 2756, 2826, 3088, 3288, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: HS6310D) $152.20

Valve Cover Gasket - For International / Farmall tractor models 460, 560, 606, 656, 706, 2706, 3616, Compatible with International Engine (s) D236 (Diesel), D282 (Diesel), Replaces International OEM number 278308R3, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128680) $13.50

Valve Cover Gasket - For International / Farmall tractor models Hydro 70, Hydro 86, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Construction and industrial models 3600A, 3800, 3850, Compatible with International Engine (s) C221, C263, C291, C301 (Gas), Replaces International OEM number 369983R2, Additional Handling and Oversize Fees Apply To This Item, (Item #: 128683) $9.80

Engine Rebuild Kits

Basic Engine Overhaul Kit, Less Bearings - C263 Gas - For tractor models 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine. Stepped head pistons). Kit contains sleeves and sleeve seals, pistons and piston rings (3-9/16 inch standard bore), pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED (must be ordered separately). (Item #: 130603, Ref: BEKH1177-LCB) $684.00

Basic Engine Overhaul Kit, Less Bearings - C291 Gas - For tractor models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons. Kit contains sleeves and sleeve seals, pistons and piston rings (3-3/4 inch standard bore), pins and retainers, complete gasket set with crankshaft seals. Note: For engines with bore classification markings 1 or 2. Crankcase bore classifications are stamped on top of filter base mounting pad. ENGINE BEARINGS AND PIN BUSHINGS ARE NOT INCLUDED (must be ordered separately). (Item #: 130609, Ref: BEKH1189-LCB) $551.00

Basic Engine Overhaul Kit, Less Bearings - D282 Diesel - For D282 CID Diesel 6-cylinder engine. Cupped head piston. Tractor models 560 and 660 using Engine serial number 40699 to serial number 44821 AND tractor models 656, 706, 2656 and 2706 using up to Engine serial number 44821. Sleeve flange diameter 4.165 inch. Kit contains sleeves and sleeve seals, pistons and piston rings (3-11/16 inch standard bore), pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED (must be ordered separately). (Item #: 130605, Ref: BEKH1174-LCB) $850.00

Basic Engine Overhaul Kit, Less Bearings - D282 Diesel - For D282 CID Diesel 6-cylinder engine, cupped head piston. For tractor models 560 and 660 Engine serial number 44822 and up and models 656, 706, 2656 and 2706 all with Engine serial number 44822 to serial number 71777. Kit contains sleeves and sleeve seals, pistons and piston rings (3-11/16 inch standard bore), pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED (must be ordered separately). (Item #: BEKH1174B-LCB) $925.00

Basic Engine Overhaul Kit, Less Bearings - D282 Diesel - Models 656, 706, 2656, 2706 all using engine serial number 71778 and up. (D282 CID Diesel 6-cylinder engine. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings (3-11/16 inch standard bore), pins and retainers, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED (must be ordered separately). (Item #: 130608, Ref: BEKH1184A-LCB) $587.00

Basic Engine Overhaul Kit, Less Bearings - D310 Diesel - Models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID diesel 6-cylinder engine. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings (3-7/8 inch standard bore), pins and retainers, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED (must be ordered separately). (Item #: 130611, Ref: BEKH6310D-LCB) $815.00

No
Picture
Basic In-Frame Engine Kit - For tractor models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons. Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 189592, Ref: BIFH1189) $547.00

Basic In-Frame Engine Kit - Models 656, 706, 2656, 2706 to engine serial number 71778 and up. (D282 CID Diesel 6-cylinder engine. Cupped head piston). Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 189589, Ref: BIFH1184A) $574.00

No
Picture
Basic In-Frame Engine Kit - Models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID Diesel 6-cylinder engine. Cupped head piston). Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 189599, Ref: BIFH6310D) $693.00

Basic In-Frame Engine Kit - C263 Gas - For tractor models 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine. Stepped head pistons). Kit contains complete sleeve and piston kit with rings (3-9/16 inch standard bore), pins and retainers, upper gasket set (with head gasket) and pan gasket. (Item #: 186114, Ref: BIFH1177) $555.00

Basic In-Frame Engine Kit - D239 Diesel - For tractor models 560, engine serial number 6766 and up, 660 engine serial number 4370 and up and models 656, 706, 2656 engine serial number 44821 to serial number 71777. (D282 CID Diesel 6-cylinder engine. Cupped head piston). Kit contains complete sleeve and piston kit with rings, pins and retainers (3-11/16 inch standard bore), upper gasket set (with head gasket) and pan gasket. (Item #: 189588, Ref: BIFH1174) $669.00

Cylinder Kit - For International / Farmall tractor models 504, 706, 2504, 2706, Compatible with International Harvester (s) 414, 420, Compatible with International Engine (s) D282, DT282, Replaces International OEM number 612008C91, (Item #: 166532) $102.00

Cylinder Kit - "Dominator" - For International / Farmall tractor models Hydro 86, 385, 584, 585, 686, 706, 756, 2500, 2500A, 2500B, 2706, 2756, Compatible with International Engine (s) D155, D206, D310, Replaces International OEM number 3228771R91, (Item #: 128732) $121.00

Cylinder Kit - Standard - For International / Farmall tractor models 504, 706, 2504, 2706, Compatible with International Harvester (s) 414, 420, Compatible with International Engine (s) D188, D282, Replaces International OEM number 609344C91, Standard liner, 1.125" piston pin diameter, (Item #: 166593) $84.00

Cylinder Sleeve - For International / Farmall tractor models 606, 656, 706, 2706, 3616, Compatible with International Engine (s) D282 (s/n 71777-later), Replaces International OEM number 609028C21, 609028C1, 3.873" Flange Diameter, (Item #: 128622) $28.30

Engine Cylinder Sleeve - For International / Farmall tractor models 340, 460, 504, 560, 606, 656, 660, 706, 2504, 2606, 2656, 2706, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 403, 615, Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD9, TD9B, TD340, 2500, Compatible with International Engine (s) D166 (early), D188 (early), D236, D282 (.875" pin, wide flange liner), DT282 (1.125" pin, wide flange liner), Replaces International OEM number 278272R1, Bore: 3.6875", Flange O.D.: 4.165", Flange Thickness: .1875", (Item #: 108753) $68.00

Engine Overhaul Kit, Less Bearings - For tractor models 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine. Stepped head pistons). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals, intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Item #: EOK1177-LCB) $1150.00

No
Picture
Engine Overhaul Kit, Less Bearings - For tractor models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals, intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Item #: EOK1189-LCB) $1043.00

Engine Overhaul Kit, Less Bearings - For tractor models 560, 660 Engine serial number 40699 to 44821 and models 656, 706, 2656, 2706 to Engine serial number 44821. (D282 CID Diesel 6-cylinder engine. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals, intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Item #: EOK1174A-LCB) $992.63

Engine Overhaul Kit, Less Bearings - For tractor models 560, 660 Engine serial number 44822 and up and models 656, 706, 2656 to Engine serial number 44822 to serial number 71777. (D282 CID Diesel 6-cylinder engine. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals, intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Item #: EOK1174B-LCB) $992.63

Engine Overhaul Kit, Less Bearings - Models 656, 706, 2656, 2706 to engine serial number 71778 and up. (D282 CID Diesel 6-cylinder engine. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals, intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Item #: EOK1184A-LCB) $981.68

Engine Overhaul Kit, Less Bearings - Models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID Diesel 6-cylinder engine. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals, intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. Kit is also available with .010 and .020 bearings. Call for price. (Item #: EOK6310D-LCB) $1415.67

No
Picture
In-Frame Overhaul Kit - 3 9/16 inch bore. For 656, 706 with C263 Gas Engine. Contains pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. Note: The main bearings in the kit can have either a 3-3/4 inch or a 4 inch diameter flange. Please specify in the comments of checkout which size you need. (Item #: 184660, Ref: R3388-IFK) $764.72

Valve Overhaul Kit - Fits 656, 706, 2656, 2706, 666, 686, 756, 766, 2756, Hydro 70, 86, 806, 826, 2806, 2826, 2856 (Gas 6 cylinder, C263, C291, C301). Kit includes valves (Stellite Exhaust Valve), valve springs, valve keys, valve guides. (Item #: 120320, Ref: VOKH263S) $331.00

Valve Overhaul Kit - For tractor models 606, 2606, 560, 660 engine serial number 40699 and up, 656, 706, 2656, 2706, (6 cylinder Diesel D236, D282). Kit includes valves, valve springs, valve keys, valve guides. (Item #: VOKH282C) $370.54

Valve Overhaul Kit - D310 and D358 Diesel - For tractor models 686, 706, 756, 2706, 2756, Hydro 86, 786, 826, 886 (chassis serial number 14472 and up), 2826, 3088, 3288. For 6 cylinder D310 and D358 Diesel. Kit includes valves, valve springs, valve keys, valve guides. (Item #: VOKH358) $524.33

Engine Parts

Bushing, Connecting Rod - Connecting rod bushing used with 1.250 inch wrist pin only. Does not fit .875 inch wrist pin. For tractor models 460, 560, 606, 660 (engine serial number 40699 to serial number 48821), 656, 706, 2606, 2656, 2706 (to serial number 44821). (Item #: 115590, Ref: 306708R1) $10.80

No
Picture
Cam Pivot Shaft - For International / Farmall tractor models 706 (Hi-Low Transmission), 806 (Hi-Low Transmission), 1206 (Hi-Low Transmission), Replaces International OEM number 180670A1, 391018R21, 391018R1, (Item #: 173673) $64.00

Cam Pivot Shaft, Used - For International tractor models 706, 806, 1206, 2706, 2806, 21206, Replaces International OEM number 391018R21, For a new version of this item use Item #: 111209, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 445279) $10.26

Cam Plate - For International / Farmall tractor models 706, 806, 1206, 4100, 4156, 4166 (all with HI-LO Transmission), Replaces International OEM number 380306K, Range cover shift cam detent with rivits., Used on 380306R51 (113404), (Item #: 151115) $25.50

No
Picture
Cam Retaining Coupler - For International / Farmall tractor models 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 21206, 21256, 21456, Replaces International OEM number 380117, Includes: 2 Grooved Pins, (Item #: 176730) $74.00

Camshaft - For International / Farmall tractor models Hydro 70, Hydro 86, 460 (engine s/n 5610-later), 560 (engine s/n 6765-earlier), 606, 656, 666, 686, 706, 756, 766, 806, 826, 856, 2606 (engine s/n 12799-13753), 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Combine (s) 101 (engine s/n 11028-later), 151, 181, 205, 303, 315, 403, 453, 503, 615 (engine s/n 44821-earlier), 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6 (engine s/n 36694-56634), TD6 (early), TD9, TD9B (engine s/n 6902-earlier), 3800, 3850 (engine s/n 71777-later), Compatible with International Engine (s) C221, C263, C291 (late), C301, D236 (narrow flange liners), D282, DT282, D301 (narrow flange liners), Replaces International OEM number 367229R1, (Item #: 160894) $279.00

No
Picture
Clutch Compartment Cover, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 4100, 4156, 4166, 4186, 21206, 21256, Replaces International OEM nos 380068R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442982) $22.51

Connecting Rod Bolt - For International / Farmall tractor models 330 (1/57-12/58), 340 (Farmall, Diesel, 1/58-12/63), 340 (Diesel, 1/58-12/63), 340 (Utility, Gas, 1/58-12/63), 460 (Diesel, 1/58-12/63), 460 (Utility, Gas, 1/58-12/63), 460 (Farmall Diesel, 1/58-12/60), 460 (Farmall, Gas, 1/58-12/63), 504 (Farmall 1/60-12/68), 504 (Diesel, 1/60-12/68), 560 (Farmall, Diesel, 1/58-12/63), 560 (Diesel, 1/58-12/63), 560 (Utility, Gas, 1/58-12/63), 606 (1/61-12/67), 660 (Diesel, 1/63-12/67), 660 (Gas, 1/59-12/63), 706 (Farmall, 1/63-12/67), 706 (1/63-12/67), 806, 806 (Farmall), 2504, 2606 (Diesel, 1/61-12/67), 2706 (s/n 1/63-12/67), Compatible with International Combine (s) 303 (Bean Special, 1/62-12/68), Compatible with International Harvester (s) 55 (With Row Crop Unit), 350 (With Row Crop Unit), 414, 420, 550 (With Row Crop Unit), 650, Replaces International OEM number 316366R1, (Item #: 165562) $17.30

Connecting Rod, Used - For International tractor models Hydro 70, Hydro 86, 454, 460, 464, 544, 560, 606, 656, 660, 666, 674, 686, 706, 756, 806, 856, 2400A, 2400B, 2500, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Combine(s) 50, 205, 303, 315, 403, 715, Compatible with International Harvester(s) 55, 350, 414, 420, 550, 616, 622, 650, Compatible with International Engine(s) C157, C175, C200, C221, C263 (C282), C291, C301, Replaces International OEM nos 367406R21, 367406R11, 367406R12, LP and Gas Engines Only, Pin Diameter: .875", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498381) $25.01

Connecting Rod, Used - For International tractor models 330, 340, 460, 504, 560, 656, 660, 706, 2500, 2504, 2606, 2706, 3514, Compatible with International Harvester(s) 414, 420, Compatible with International Engine(s) D166, D188, D236, D282, D301, Replaces International OEM nos 306280R12, Replaces Casting nos 306280, 306280R, 306280R1, Diesel Engines, Length Center to Center: 7.250", Housing Bore: 2.4995" - 2.5000", Pin Diameter: 1.1252" - 1.1258", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498382) $50.01

Constant Mesh Gear, Used - For International tractor models 706, 756, 806, 856, 1206, 1256, 2706, 2756, 2806, 2856, 21206, 21256, Replaces International OEM nos 380161R2, Replaces Casting nos 380161R1, Teeth: 50, Splines: 24, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434903) $289.01

Crankshaft Damper Pulley - This Crankshaft Damper Pulley is for tractor models (706, 756 with D-310 engine), (2826, 826 with D-358 engine). (Item #: 124781, Ref: 3132270R95) $520.00

No
Picture
Crankshaft, Remanufactured, 3059757R93 - For International / Farmall tractor models 706, 756, Compatible with International Combine (s) 715, Compatible with International Engine (s) D310, Replaces International OEM number 3059757R93, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200251) $1100.01

Crankshaft, Remanufactured, 320185R, 367267R - For International / Farmall tractor models 560 (with C263, C291 or D282), 656 (with C263, C291 or D282), 666 (with C291), 686 (with C291), 706 (with C263, C291 or D282), 756 (with C291), 766 (with C291), 806 (with C301), Replaces Casting number 320185R, 367267R, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., Additional Handling and Oversize Fees Apply To This Item, (Item #: 200249) $780.01

Crankshaft Timing Gear - For tractor models (454 with C-157), (350, 454, 464 with C-175), (504, 2504 with D-188), (544, 574, 674 with C-200), (460, 606, 2606 with C-221), (460, 606, 2606 with D-236), (560, 656, 660, 706, 2706 with C-263), (560, 656, 660, 706, 2706 with D-282), (Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706 with C-291), (806, 826, 856 with C-301). Replaces: 367272R1 (Item #: 121570, Ref: 367272R1) $214.30

No
Picture
Cylinder Head, Remanufactured, 3055050R1 - For International / Farmall tractor models 686, 706, 756, 786, 826, 886, 3088, 3288, Compatible with International Combine (s) 715, 815, 915 (Diesel), Replaces International Casting number 3055050R1, 3055368R98, Engines 310, 358, Cylinders: 6, Casting No. 3055050R1, 3055368R98, Not a Welded Head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200213) $660.01

No
Picture
Cylinder Head, Remanufactured, 3055656R - For International / Farmall tractor models 686, 706, 756, 786, 826, 886, 3088, 3288, Compatible with International Combine (s) 715, 815, 915 (Diesel), Replaces International Casting number 3055656R, 3055655R95, Casting No. 3055656R, 3055655R95, Engine 310, 358, Cylinders: 6, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205504) $1500.01

No
Picture
Cylinder Head, Remanufactured, 323770R - For International / Farmall tractor models 560 (Late), 606, 656, 706, Compatible with International Combine (s) 715, Replaces International Casting number 323770R, Casting No. 323770R, Engine D-282, Cylinders: 6, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205501) $1375.01

No
Picture
Cylinder Head, Remanufactured, 323771R - For International / Farmall tractor models 560 (Late), 606, 656, 706, Compatible with International Combine (s) 715, Replaces Casting number 323771R, 323773R, Engine D-282, Cylinders 6, Casting No 323771R, 323773R, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200208) $1650.01

No
Picture
Cylinder Head, Remanufactured, 378240R - For International / Farmall tractor models Hydro 70, Hydro 86, 606, 656, 666, 706, 756, 766, 806, 826, 856, Compatible with International Combine (s) 615, 715 (Gas), Replaces International Casting number 378240R, Casting No. 378240R, Engines C-221, C-263, C-291, Cylinders: 6, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205503) $1100.01

No
Picture
Cylinder Head, Remanufactured, 380938R - For International / Farmall tractor models Hydro 70, Hydro 86, 606, 656, 666, 706, 756, 766, 806, 826, 856, Compatible with International Combine (s) 615, 715 (Gas), Replaces International Casting number 380938R, 382099R, Casting No. 380938R, 382099R, Engine C-221, C-263, C-291, Cylinders: 6, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205502) $660.01

No
Picture
Cylinder Head, Remanufactured, 387972R - For International / Farmall tractor models Hydro 70, Hydro 86, 606, 656, 666, 706, 756, 766, 806, 826, 856, Compatible with International Combine (s) 615, 715 (Gas), Replaces International Casting number 387972R, 383666R, 387718R, Engine C-221, C-263, C-291, Cylinders 6, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200211) $1225.01

Cylinder Head, Used - For International tractor models Hydro 70, Hydro 86, 606, 656, 666, 706, 756, 766, 806, 826, 856, Compatible with International Combine(s) 615, 715 (Gas), Replaces International Casting number 380938R, 382099R, Engine(s): C-221, C-263, C-291, Cylinders: 6, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 205502, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405502) $332.01

Cylinder Head, Used - For International tractor models Hydro 70, Hydro 86, 606, 656, 666, 706, 756, 766, 806, 826, 856, Compatible with International Combine(s) 615, 715 (Gas), Replaces International Casting number 387718R, 383666R, 387972R, Engine(s): C-221, C-263, C-291, Cylinders: 6, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200211, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400211) $315.01

No
Picture
Cylinder Head - with Valves, Remanufactured, 323771R - For International / Farmall tractor models 560 (Late), 606, 656, 706, Compatible with International Combine (s) 715, Replaces International Casting number 323771R, 323773R, Engine D282, Cylinders: 6, Casting No. 323771R, 323773R, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, (Item #: 205421) $1999.01

Driving Gear - 1st, Used - For International tractor models 706, 756, 806, 856, 1206, 1256, 2706, 2756, 2806, 2856, 4100, 21206, 21256, Replaces International OEM nos 390259R1, Teeth: 27, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438717) $133.01

No
Picture
Exhaust Valve Seat - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460 (s/n 35093-earlier), 464, 544, 560 (s/n 36693-later), 574, 606 (s/n 35093-earlier), 656, 660 (s/n 38981-later), 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606 (s/n 35093-earlier), 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 151, 181, 205, 303, 315, 403 (s/n 2225-earlier), 453, 615, 715, Compatible with International Harvester (s) 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, Compatible with International Construction and industrial models T6 (s/n 36694-56634), 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2500B, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C200, C221, C263, C291, C301, Replaces International OEM number 126373R1, (Item #: 185617) $4.10

No
Picture
Flywheel WIth Ring Gear - For International / Farmall tractor models 706 (Engine D-310), 756 (Engine D-310), 786 (Engine D-358), 826 (Engine D-358), 886 (Engine D-358), 3088 (Engine D-358), 3288 (Engine D-358), Replaces Case IH OEM number 3055980R11, Used with 12" Clutch, Teeth: 132, Additional Handling and Oversize Fees Apply To This Item, (Item #: 159130) $792.00

Forward Reverse Shift Collar, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM nos 393524R1, 380302R1, 3.61" Dia., Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498210) $50.01

Gear -1st and 2nd, Used - For International tractor models 706, 756, 806, 856, 1206, 1256, 2706, 2756, 2806, 2856, 21206, 21256, Replaces International OEM nos 380124R1, Splines: 20, Teeth: 41 and 46, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438716) $130.01

Hi-Lo Driven Gear Carrier, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM nos 380289R1, Height: 2", Outside Diameter: 2 3/4", Splines: 17, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431513) $35.01

Hi Lo Shift Collar, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM nos 393521R1, Diameter: 5.05", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498208) $50.01

Low Drive Gear, Used - For International tractor models 706 (s/n Farmall 40811-later, International 5649-later), 756 (s/n Farmall 17638-earlier, International 8424-earlier), 806 (s/n Farmall 28275-later, International 7928-later), 856 (s/n Farmall 27286-earlier, International 9492-earlier), 1206, 1256, 2706 (s/n Farmall 40811-later, International 5649-later), 2756 (s/n Farmall 17635-earlier, International 8924-earlier), 2806 (s/n Farmall 28275-later, International 7928-later), 2856 (s/n Farmall 27286-earlier, International 9492-earlier), 21026, 21206, Replaces International OEM number 391883R1, Teeth: 28 and 33, ID: 2.48", Splines: 24, For Hi-Low Drive Gear use Item #: 455261, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430255) $125.01

Pre-Combustion Chamber, Used - For International tractor models 560, 660, 706, 2706, Compatible with International Harvester(s) 414, 420, Compatible with International Engine(s) D282, D301, Replaces International OEM nos 278275R3, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429624) $117.01

Pump Drive Gear, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 21026, 21206, 21256, 21456, Replaces International OEM number 380319R1, Teeth: 61, Splines: 12, Thickness: 9/16", For a new version of this item use Item #: 173445, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499220) $85.01

Push Rod - For [Hydro 70, Hydro 86, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856, 2544, 2756, 2806, 2826, 2856 (Gas and LP Only)], [340, 504, 2504 (Diesel)], [460, 560, 606, 656, 660, 706, 2606, 2656, 2706 (Gas, LP, Diesel (No German Diesels)], [Industrial: 100C, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62, T7 (Gas and LP Only)], [150, H25B, H30A, H30F, H30R, H50A, H50B, H50C, H60B, S7A, S7B, TD340, TD6-62, TD9-91, TD9-92, TD9B (Diesel)], CONSTRUCTALL: 2500 (Diesel), [Industrial: 3514, 3616, 3800, 3850, H30B (Gas, LP, Diesel (No German Diesels)]. Replaces: 164436R91. Size: 12.684 O/A length, .375 tube dia. (Item #: 184399, Ref: 164436R91) $19.30

Push Rod, Used - For International tractor models 330, 340, 350, 460, 504, 560, 606, 660, 706, 806, 2504, 2606, 2706, Compatible with International Combine(s) 303, Compatible with International Harvester(s) 55, 414, 420, 550, 650, Replaces International OEM nos 164436R91, Length: 12 3/4", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430417) $7.51

Range Transmission Shift Cam - For International / Farmall tractor models 706, 806, 1206, 2706, 2806, 4100, 4156, 4166, 4186, 21206, Replaces International OEM number 380306R51, (Item #: 113404) $200.00

Retainer - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2544, 2608, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 460, 504, 5088, 5288, 544, 5488, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 167178, Ref: 48703D) $8.40

Ring Gear, Flywheel - This ring gear has 132 teeth and measures 16.680 inch outside diameter, 15.485 inch inside diameter, .610 inch wide. For tractor models (1026 diesel), (1066 hydro or diesel), (21026, 2826, 2856, 3088, 3288 diesel), (3488, 3688 hydro, diesel), (706, 756, 766, 786 diesel), (806 with D361), (826, 856, 886, 966, 986, Hydro 100, Hydro 186 diesel). (Item #: 103900, Ref: 341604R1) $46.90

No
Picture
Selector Drive Arm, Used - For International tractor models 706, 806, 1206, 2706, 2806, 21206, Replaces International OEM number 382518R1, 382518, For a new version of this item use Item #: 156640, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436185) $34.01

Shift Cam, Used - For International tractor models 706, 806, 1206, 2706, 2806, 4100, 4156, 4166, 4186, 21206, Replaces International OEM number 380306R51, 380306R, Replaces OEM 380306R11 - 380306R50, For a new version of this item use Item #: 113404, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434905) $128.01

Shift Rail, Used - For International tractor models 706, 756, 766, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM nos 380122R1, Speed Transmission, Gear Drive Tractors, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430720) $27.01

Sliding Gear, 3rd and 4th, Used - For International tractor models 706, 756, 806, 856, 1206, 1256, 2706, 2756, 2806, 2856, 21206, 21256, Replaces International OEM number 380125R2, Splines: 20, Teeth: 25 and 31, 3rd and 4th, For a new version of this item use Item #: 172447, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433106) $261.01

Torque Amplifier Drive Gear, Used - For International tractor models 706 (s/n 4601-later, Farmall s/n 29001-later), 756 (s/n 8424-earlier, Farmall s/n 17635-earlier), 806 (s/n 5701-later, Farmall s/n 23001-later), 856 (s/n 9492-earlier, Farmall s/ 27286-earlier), 1206, 1256, 2706 (s/n 4601-later, Farmall s/n 29001-later), 2756 (s/n 8424-earlier, Farmall s/n 17635-earlier), 2806 (s/n 5701-later, Farmall s/n 23001-later), 2856 (s/n 9492-earlier, Farmall s/ 27286-earlier), 21206, 21256, Replaces International OEM nos 392291R1, Teeth: 51, Splines: 25, Outside Diameter: 8 3/16", Inside Diameter: 2 9/16", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436799) $141.01

Torque Amplifier Input Shaft - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 6388, 6588, Compatible with International Construction and industrial models 21256, 21456, Replaces International OEM number 380076R4, 26 Tooth, (Item #: 162945) $572.00

Torque Amplifier Quill, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 6388, 6588, Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number 382349R1, 382349N, For a new version of this item use Item #: 110264, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410264) $79.01

Transmission Countershaft, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM number 148951C1, 148951C, Tubular, LH Thread, Early SN 66 and prior models requires spacer 71147C1, 71147C2, For a new version of this item use Item #: 113419, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497400) $179.01

Transmission Drive Shaft, Used - For International tractor models Hydro 100, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 4100, 4156, 4166, 4186, 6388, 6588, 21206, 21256, 21456, Replaces International OEM number 380076R4, 380076R1, 380076R2, 380076R3, Teeth: 26, Splines: 11, For a new version of this item use Item #: 162945, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499217) $234.01

No
Picture
Used Cylinder Head, Used - For International tractor models 686, 706, 756, 786, 826, 886, 3088, 3288, Compatible with International Combine(s) 715, 815, 915 (Diesel), Replaces International Casting number 3055656R, 3055655R95, Engine(s): 310, 358, Cylinders: 6, Injector Nozzle Tip Bore: .385", Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 205504, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405504) $650.01

No
Picture
Valve Cover, Used - For International tractor models 460, 560, 660, 706, 2606, 2706, Compatible with International Harvester(s) 414, 420, Compatible with International Engine(s) D236, D282, D301, Replaces International OEM nos 278307R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 440572) $101.01

Valve, Exhaust - Price shown is for (1) exhaust valve. Stellite Faced Valve. Fits models: 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine. Stepped head pistons) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons). (Item #: 128502, Ref: 372699R3) $24.70

Valve, Exhaust - Price shown is for each, sold only in multiples of 2 items. For tractor models 606, 2606, 656, 706, 2656, 2706. (D236 CID Diesel 6-cylinder engine. Cupped head piston) and models 560, 660 engine serial number 40699 and up. (D282 CID Diesel 6-cylinder engine. Cupped head piston). (Item #: 166557, Ref: 612312C1) $15.20

Valve, Exhaust - Exhaust valve for models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID Diesel 6-cylinder engine. Cupped head piston). Models 786, 826, 886 Chassis serial number 14472 and up, 2826, 3088 to engine serial number 121247, 3288 to engine serial number 111090. (D358 CID Diesel 6-cylinder engine. Cupped head piston). (Item #: 128731, Ref: 3055056R2) $15.10

Valve Guide - VALVE GUIDE For 2504, 2606, 2656, 2706, 3514, 460, 504, 560, 606, 656, 660, 706. (Item #: 173029, Ref: 278300R1) $9.10

Valve Guide - For tractor models 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: 172721, Ref: 3055022R2) $4.30

Valve Guide - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Replaces International OEM number 237248R1, (Item #: 128515) $5.70

Valve, Intake - For tractor models 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine. Stepped head pistons) and models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons). (Item #: 191128, Ref: 234276R1) $16.30

Valve, Intake - Intake Valves sold each. Please verify the number of valves needed for your engine. Some engines require 3, 4 or 6 Intake Valves. Models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID Diesel 6-cylinder engine. Cupped head piston). Models 786, 826, 886 chassis serial number 14472 and up, 2826, 3088 to engine serial number 121247, 3288 to engine serial number 111090. (D358 CID Diesel 6-cylinder engine. Cupped head piston). (Item #: 128730, Ref: 3055055R2) $15.40

Valve, Intake - Price shown is for 1 Intake Valve. MUST BE ORDERED IN MULTIPLES OF 2. For tractor models 606, 2606, 656, 706, 2656, 2706. (D236 CID Diesel 6-cylinder engine. Cupped head piston) and models 560, 660 engine serial number 40699 and up. (D282 CID Diesel 6-cylinder engine. Cupped head piston). Replaces 323774R1, S1956, 323774R2 (Item #: 173795, Ref: 323774R1) $11.40

Valve Rotator - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 205, 303, 315, 403, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, TD6, TD340, 100, 2500B, 2505B, 3500A, 4500B, 8000, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 375604R91, Replaces International Casting number 278368R, Engine: D282 early, Use with Head Casting No. 278368R, (Item #: 109732) $52.00

Valve Seal - This is a positive type valve seal used on International Diesel Engines. Replaces 3218398R91, 3218399R1, 3228677R91 (Item #: 128633) $2.60

No
Picture
Valve Service Kit - Cylinder HEAD Service KIT For 2656, 2706, 2756, 656, 666, 686, 706, 756, 766, HYDRO 70, HYDRO 86. Contains: springs, guides, locks, (no valves). (Item #: VSKH263S) $124.14

No
Picture
Valve Service Kit - Cylinder HEAD Service KIT For 2606, 2656, 2706, 460, 560, 606, 656, 660, 706. Contains: springs, guides, locks, (no valves). (Item #: VSKH282B) $150.76

No
Picture
Valve Service Kit - Cylinder HEAD Service KIT. For tractor models 2706, 2756, 2826, 3088, 3288, 686, 706, 756, 786, 826, 886, HYDRO 86. Contains: springs, guides, locks, (no valves). (Item #: VSKH358) $387.93

No
Picture
Valve Spring - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 560, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 50, 101, 151, 181, 205, 303, 315, 403, 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models TD340, 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, C221, C236, C263, C291, C301, D166, D236, D282, DT282, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 367192R1, (Item #: 185589) $4.20

Valve Spring, Diesel - VALVE SPRING. For 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, (706, 756, 786, 826, 886, HYDRO 86 all with D310 Diesel). (Item #: 173505, Ref: 3055060R1) $7.40

Valve Tappet 0.999 Inch - These tappets are used in the following engines: C221, C263, C291, C301, (DT436 Engine serial number <121624), (DT436B Engine serial number <121624), (DT466 Engine serial number <140087), (DT466B Engine serial number <140087), D188, D236, D282, D360, D361, (D414 Engine serial number <155806), (D436 Engine serial number <121624), (D466 Engine serial number <140087). They are 0.999 inch diameter. Replaces original part numbers 72524R3, 684729C1, 911776R3, 91176R2, 911776R1, 76952R2, 677541C1, 606492, 28708A, 75524R3, 75524R2, 75524R1. (Item #: 108437, Ref: 911776R3) $7.80

Valve Train Kit - For International / Farmall tractor models 460 (engine s/n 5610-later), 560, 606, 656, 660, 706, 2606, 2656, 2706 (engine s/n 44822-71777), 3616 (engine s/n 16620-later), Compatible with International Combine (s) 101 (engine s/n 11028-later), 151, 181, 315, 403, 453, 503, 615 (engine s/n 44821-later), 715 (s/n 23000-earlier), Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD9 (92 series), TD9B (engine s/n 6903-11440), 3800, 3850 (engine s/n 71777-later), Compatible with International Engine (s) D236, D282, DT282, D301 (all 6 cylinder diesel), For applications with rotator below spring, Kit includes: Intake and exhaust valves, guides, springs and keepers, Intake Valves: 1.680" head diameter, 6.040" length, 45 degrees, Exhaust Valves: 1.370" head diameter, 6.060" length, 45 degrees, (Item #: 120319) $357.15

Valve Train Set - For International / Farmall tractor models 656, 666, 686, 706, 756, 766, 2656, 2706, 2756, Replaces International OEM number 237248R1, Replaces Intake Valves 234276R1, Exhaust Valve 372699R3, Valve Springs 367192R1, Valve Guides 535229R1, 237248R1, Valve Keepers 33K701, Stellite Exhaust Valves, (Item #: 114736) $278.00

Vibration Dampener, Used - For International tractor models 706, 2706, Compatible with International Engine(s) C263, D282, Replaces International OEM nos 347826R91, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441158) $204.01

Engine Pistons and Sleeves

Cylinder Sleeve - Used on C221 gas engines on 460, 606, 2606, 3616 and C263 gas engines on 560, 656, 660, 706, 2656, 2706, 3600A, 3800, 3850, this is a standard bore cylinder sleeve. It measures; Bore Diameter: 3.5625 inches / 90.4875mm, Flange Outer Diameter: 4.052 inches / 102.9208mm Flange Width: 0.189 inches / 4.8006mmm, Sleeve O.D. at Barrel: 3.6890 inches / 93.7006mm, Length: 7.625 inches / 193.6750mm. Replaces 367645R1, 3803698, RP141294, SD372 (Item #: 128647, Ref: 367645R1) $64.00

Piston Pin Bushing - PIN BUSHING. For 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: 128516, Ref: 3132018R2) $5.60

Piston Pin Bushing - Piston pin bushing, 4 or 6 used per engine depending on application. .875 inch inside diameter, .935 inch outside diameter. For C291 CID gas 6 cylinder engine in tractors 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. For 2606, 2656, 2706, 2756, 2806, 2856, 300, 350, 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86. Price shown is for each, sold only in multiples of 2 items. Change quantity once in cart to match your specific needs. (Item #: 109736, Ref: 364913R1) $7.10

Sleeve and Piston Kit - For tractor models 666, 686, 706, 756, 766, 2706, 2756, Hydro 70 and 86. (C291 CID Gas 6-cylinder engine. Contour step head pistons. Sleeves, pistons and rings, pins and retainers. For 3-3/4 inch standard bore. Kit contents for 1 engine. (Item #: 184188, Ref: PK189) $671.00

Sleeve and Piston Kit - Sleeve and Piston Kit for tractor models 560 engine serial number 6766 to serial number 44821 and 660 engine serial number 4370 to serial number 44821 and models 656, 706, 2656 to engine serial number 44821. (D282 CID Diesel 6-cylinder engine. Cupped head piston). Sleeves, pistons and rings, pins and retainers. For 3-11/16 inch standard bore. (Item #: PK174) $713.49

Sleeve and Piston Kit - Models 656, 706, 2656, 2706 to engine serial number 71778 and up. (D282 CID Diesel 6-cylinder engine. Cupped head piston). Sleeves, pistons and rings, pins and retainers for 1 engine. For 3-11/16 inch standard bore. (Item #: PK184) $441.01

Sleeve and Piston Kit - Models 686, 706, 756, 2706, 2756, Hydro 86. (D310 CID Diesel 6-cylinder engine. Cupped head piston). Sleeves, pistons and rings, pins and retainers. For 3-7/8 inch standard bore. (Item #: PK6310D) $765.27

Sleeve and Piston Kit, For Single Cylinder - For tractor models 656, 706, 2656, 2706. (C263 CID Gas 6-cylinder engine. Stepped head pistons). Sleeves, pistons and rings, pins and retainers. For 3-9/16 inch standard bore. Compression height is 2.024 inches. Uses pin bushing number 64913R1. (Item #: 169735, Ref: PK177) $100.00

Sleeve and Piston Set - Used on C291 gas engines, Contains sleeve, stepped head piston, rings, pin and retainer for one cylinder. For 3-3/4 inch standard bore. (Item #: 395356R93) $67.04

Sleeve Orings, Pair - Used with D179 CID Engine on: 454, 464, 484. Used with D206 CID Engine 474, 584, 585. Used with D239 CID Engine on: 2544, 544, 574, 664, 674, 684, 685, 724, 824. Used with D310 CID Engine on 2706, 2756, HYDRO 86, 686, 706, 756. Used with D358 CID Engine on: 2826, (3088 below serial number 121247), (3288 below serial number 111090), 786, 826. Inside Diameter: 4.331 inch (110.00 MM). Thickness 0.197 inch (5.00 MM) Replaces 3228344R1, 3055021R2, 3218603R1. (Item #: 179427, Ref: SRK724) $5.30

Engine Rings

Piston Ring Set - PISTON RING SET. For 2656, 2706, 560, 656, 660, 706 all with 282 CID 6 cylinder diesel with standard bore 3 11/16 inches, to engine serial number 29264, cupped head piston, 4.165 inch sleeve flange diameter, 1 5/16 inch exhaust valve head diameter, 3 3/4 inch thrust bearing flange. Piston ring set, 2 at 1/8 inch (top ring is half keystone), 1 at 1/4 inch. 1 kit per engine. (Item #: 174314, Ref: PRS174) $102.00

No
Picture
Piston Ring Set - Ring set for 6 pistons, 1 used per engine. For C263 CID gas 6 cylinder engine. Contains 2 compression 3/32 and oil ring 1/4 per cylinder. For 2656, 2706, 656, 706 (Item #: 174314, Ref: PRS177) $102.00

No
Picture
Piston Ring Set - Ring set for a 3 ring piston and is a set for 6 pistons, 1 used per engine. For C291 CID gas 6 cylinder engine with a 3 3/4 inch bore. Contains 1 compression 1/8, 1 compression 3/32 and oil ring 1/4 for each cylinder. For 2706, 2756, 666, 686, 706, 756, 766, HYDRO 70, HYDRO 86 (Item #: 178267, Ref: PRS189) $124.00

Piston Ring Set - .030" Oversize - Single Cylinder - For International / Farmall tractor models 460, 560, 606, 656, 660, 706, 2606, 2656, 2706, 3616 (all gas), Compatible with International Construction and industrial models 3600, 3616, 3800, 3850 (all gas), Compatible with International Engine (s) C221, C263, Standard Bore: 3.5625", Ring Size: .030” Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For standard use Item #: 120862, (Item #: 120861) $49.90

Piston Ring Set - .040" Oversize - Single Cylinder - For International / Farmall tractor models 460, 560, 606, 656, 660, 706, 2606, 2656, 2706, 3616 (all gas), Compatible with International Construction and industrial models 3600, 3616, 3800, 3850 (all gas), Compatible with International Engine (s) C221, C263, Standard Bore: 3.5625", Ring Size: .040” Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For standard use Item #: 120861, (Item #: 120862) $53.00

Piston Ring Set - Standard - 2 Cylinder - For International / Farmall tractor models 340, 460, 504, 560, 606, 656, 660, 706, 2504, 2606, 2656, 2706, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 315, 403, 615, Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD6, TD9B, TD340, 2500, Compatible with International Engine (s) D166, D188, D236, D282, DT282, Bore: 3.6875", Compression Rings per Piston: (2) @ .125", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Half Keystone, Chrome 10 Degree, 2nd Groove Size: .125", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a 2 cylinder set, (Item #: 128966) $75.00

No
Picture
Piston Ring Set - Standard - 6 Cylinder Set - For International / Farmall tractor models Hydro 86, 686, 706, 756, 786, 826, 886, 2706, 2756, 2826, 3088, 3288 (all diesel), Compatible with International Engine (s) D310, D358, Bore Size: 3.875", Ring Size: Standard, Compression Rings per Piston: (3) @ .125", Oil Rings per Piston: (1) @ .188", Top Groove Size: .125", Top Groove Style: Keystone Torsional Chrome 15 Degree, 2nd Groove Size: .125", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .125", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Chromed Cast Iron / Coiled Spring, Sold as a complete 6 cylinder set, For Single Cylinder Piston Ring Set use Item #: 120853, (Item #: 174213) $264.00

No
Picture
Piston Ring Set - Standard - 6 Cylinder Set - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706, 2756 (all gas), Compatible with International Engine (s) C291, Bore Size: 3.750", Ring Size: Standard, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 6 Cylinder Piston Ring Set, Piston Ring Set - Standard - Single Cylinder use Item #: 120867, (Item #: 174316) $145.00

No
Picture
Piston Ring Set - Standard - Single Cylinder - For International / Farmall tractor models 460, 560, 606, 656, 660, 706, 2606, 2656, 2706, 3616 (all gas), Compatible with International Construction and industrial models 3600, 3616, 3800, 3850 (all gas), Compatible with International Engine (s) C221, C263, Replaces International OEM number 539379R2, Bore: 3.5625", Ring Size: Standard, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For .030" use Item #: 120862, (Item #: 108033) $17.90

Piston Ring Set - Standard - Single Cylinder - For International / Farmall tractor models Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706, 2756 (all gas), Compatible with International Engine (s) C291, Bore Size: 3.750", Ring Size: Standard, Compression Rings per Piston: (1) @ .125" and (1) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .250", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For Piston Ring Set - Standard - 6 Cylinder use Item #: 174316, (Item #: 120867) $25.50

Exhaust System

Exhaust Manifold Pipe - 2 1/2 inch inside diameter x 2 15/16 inch outside diameter x 18 used with 384290R1 manifold. For tractor models 460, 560, 606, 660, 686, 656, 666, 706, 756, 766, 806, 826, 2826, 2856, Hydro 70, Hydro 86, 856. (Item #: 113422, Ref: 383974R2_) $33.10

Exhaust Manifold, Used - For International tractor models 460, 560, 660, 706, 2606, 2706, Compatible with International Engine(s) D236, D282, D301, Replaces International OEM nos 278643R1, 278643R2, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429988) $176.01

$Farmall 706 Exhaust Stack - 2-3\8 inch X 36 inch, Curved Chrome$
Exhaust Stack - 2-3/8" X 36", Curved Chrome - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Style: Curved, Inlet I.D.: 2-3/8", O.D.Pipe: 2-1/2", Length: 36", Chrome Plated, Eliminates Muffler, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115481) $165.88

$Farmall 706 Exhaust Stack - 2-3\8 inch X 36 inch, Curved Chrome$
Exhaust Stack - 2-3/8" X 36", Curved Chrome - For International / Farmall tractor models H, M, Super H, Super M, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Replaces International OEM number A29991, Style: Curved, Inlet I.D.: 2-3/8", O.D. Pipe: 4", Length: 36", Chrome Plated, Eliminates Muffler, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115486) $209.00

$Farmall 706 Exhaust Stack - 2-3\8 inch X 36 inch, Straight Chrome$
Exhaust Stack - 2-3/8" X 36", Straight Chrome - For International / Farmall tractor models Super H, Super M, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Replaces International OEM number 62476D, Style: Straight, Inlet I.D.: 2-3/8", O.D. Pipe: 3", Length: 36", Chrome Plated, Eliminates Muffler, (Item #: 115487) $134.11

No
Picture
Extension - For International / Farmall tractor models Hydro 70 (Hydrostatic Drive, 1/74-12/77), Hydro 86 (Hydrostatic Drive, 1/74-12/77), Hydro 100, 656 (1/72-12/72), 686 (1/69-12/71), 706 (1/63-12/67), 706 (Farmall, 1/63-12/67), 756 (1/67-12/71), 756 (Farmall, 1/67-12/71), 766 (1/72-12/78), 826 (1/69-12/71), 826 (Farmall, 1/69-12/71), 856 (1/68-12/83), 966 (Diesel, 1/71-12/71), 2706 (1/63-12/67), 2756 (1/69-12/71), 2826 (Diesel, 1/69-12/71), 2856 (Diesel), Compatible with International Engine (s) D361 (6-cylinder, Diesel), DT361 (6-ctlinder, Turbo Diesel), D407 (6-cylinder, Diesel), DT407 (6-ctlinder, Turbo Diesel), Replaces International OEM number 527703R1, (Item #: 166178) $57.00

Intake Manifold Pilot - Ferrule - For International / Farmall tractor models Hydro 70, Hydro 86, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2656, 2706, 2756, 2806, 2826, Compatible with International Harvester (s) 414, 420, 616, 622, Replaces International OEM number 138733R1, 1.630" Step, 1.690" Outside Diameter, (Item #: 167365) $25.10

No
Picture
Manifold - Exhaust manifold, for gas powered tractors. For 2706, 2756, 2826, 2856, 666, 686, 706, 756, 766, 806, 826, 856, HYDRO 70, HYDRO 86 (Item #: 101556, Ref: 384290R21) $234.00

Manifold - For International / Farmall tractor models Hydro 70, Hydro 86, 606 (use pipe adapter125212), 656 (use pipe adapter 125217), 666, 686, 706, 756, 766, 806, 826, 856, Replaces International OEM number 367281R1, 384290R2, 85699R1, Engines: C221 (use pipe adapter 125212), C263 (use pipe adapter 125212), C282, C291, C301, Completely assembled 2-piece assembly contains OEM heat spring, 2-1/2" NPT threaded pipe outlet, Application information, This completely assembled 2-piece intake and exhaust manifold is easier to install! Our 121565 2-piece manifold with heat spring eliminates the need to match the flanges of a used manifold to half of a new manifold, Please order 113422 exhaust pipe unless you have a 460, 560, 606, 660, 2606 or 3616, If you have a 460, 560, 606, 660, 2606 or 3616, then you need an exhaust adapter. Please view: 125212 adapter. This adapter offsets the exhaust hole to align with the hood of the tractor and also steps down the pipe diameter to 2" NPT. These tractors use 126744 exhaust pipe, If you have a 656 or 2656, then you can use the 113422 exhaust pipe, however the exhaust pipe is not perfectly centered on the exhaust hole in the hood. Also, you need to have the inlet pipe on the muffler expanded to accommodate this larger diameter pipe or you need to purchase 100824 muffler, If you need to adjust the pendulum (121566) on the intake manifold, please use a Torx T8 screwdriver or bit, (Item #: 121565) $525.00

Manifold - This Manifold for gas intake with heat valve assembly is for models 460, 560, 656, 666, 706, 756, 806, 826, 856, 2756, 2826, 2856, Hydro 70, Hydro 86. Replaces OEM number 393705R11. (Item #: 101554, Ref: R2661) $210.00

Manifold, Exhaust - For tractor models: 666, 686, 706, 756, 766, 806, 826, 856, 2826, 2856, Hydro 70, Hydro 86 all with C263, C291 or C301 Gas Engines. This also fits 460, 560, 606, 656, 660 if you cut the hole in the hood larger, or if you use R0057A offset adapter. Gasket set is R0057G, If needed please add to your order. (Item #: 101556, Ref: 384290R1) $234.00

No
Picture
Manifold Gasket Set - For tractor models: 666, 686, 706, 756, 766, 806, 826, 856, 2826, 2856, Hydro 70, Hydro 86 all with C263, C291 or C301 eng. (Item #: 101555, Ref: R0057G) $26.70

Manifold Heat Control Spring - Used on Farmall and International models 560, 806, 2606, 2656, 2706, Hydro 70, 2756, 2806, 2826, Hydro 86, 460, 606, 656, 660, 666, 706, 756, 766, 826, 856, 686, this part replaces 82958R2, 82958R1 (Item #: 179404, Ref: 82958R2) $36.90

Manifold Heat Control Weight - Made of cast iron. For gas Models: 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856. (Item #: 121566, Ref: 85699R1) $25.10

Manifold, Intake - This Intake manifold is for tractor models: 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2656, 2706, 2756, 2826, 2856, Hydro 70, Hydro 86 all with C263 or C291 gas engines. MIncludes Heat Valve Assembly. Replaces 367261R11 383705R11, IHS154. (Item #: 101554, Ref: 393705R11) $210.00

No
Picture
Muffler - Vertical muffler for gas tractors. Fits engines C263 and C301. Inlet inside diameter 2-15/16 inch, outlet outside diameter 3 inches, length 34 inches, diameter 6 inch round body. For tractor models 706, 2706, 806, 2806. Diesel engine D361 models 806, 2606. For 2606, 2706, 2806, 706, 806. (Item #: 100811, Ref: 384345R92) $57.00

Muffler - Vertical muffler for diesel engine. Fits engine D282. Inlet inside diameter 2-3/8 inch, outlet outside diameter 2-1/2 inches, length 34 inches, diameter 5-1/2 inch round body. For tractor models 706, 2706. For 2706, 706. (Item #: 100810, Ref: 384346R92) $68.00

Muffler - Vertical muffler for diesel tractors. Fits engine D310. Inlet inside diameter 2-15-16 inch, outlet outside diameter 3 inches, length 40 inches, diameter 6 inch round body. For tractor models 706, 756, 2706, 2756. For 2706, 2756, 706, 756. (Item #: 100814, Ref: 398512R2) $75.00

Muffler - Vertical muffler for diesel tractors. Fits engines D310, and D358. Inlet inside diameter 2-15/16 inch, outlet outlet diameter 3 inches, length 42 inches, oval body. For tractor models Hydro 86, 686, 706, 756, 2706, 2756, 826, 2856. For 2706, 2756, 2856, 686, 706, 756, 826, HYDRO 86. (Item #: 180433, Ref: 530588R4) $284.00

Muffler - Vertical Exhaust inlet inside diameter 2 15/16 inches, outlet outside diameter 3 inches, overall length 34 inches. For 666, 686, 706, 766, Hydro 70, Hydro 86 with C263 or C291 Gas Engines, 706 with D310 Diesel Engine, 806 with C301 Gas or D361 Diesel, 826, 856 with C301 Gas Engine, 856 with D407 Diesel Engine. OEM numbers 570578R3, 530578R4 use R1756 clamp, use R1805 rain cap. (Item #: 100824, Ref: R1650) $116.00

Muffler - Vertical Exhaust Inlet inside diameter 2 15/16 inch, outlet outside diameter 3 inches, overall length 34 inches. For 706 with C263 Gas Engine 806 with C301 Gas or D361 Diesel Engines. OEM numbers 384345R1 or 384345R91, use MC300 clamp, use R1805 rain cap. (Item #: 150931, Ref: R1072) $59.47

Muffler - Vertical Exhaust Inlet inside diameter 2 15/16 inch, outlet outside diameter 3 inches, overall length 34 inches. For 706 with C263 or C291 Gas or LP756 with C291 Gas or LP Engine 856 with C301 Gas or LP Engine. OEM number use R1756 clamp, use R1805 rain cap. (Item #: 100816, Ref: R1073) $57.00

Muffler - Vertical Exhaust Inlet inside diameter 2 3/8 inch, outlet outside diameter 2 1/2 inch, overall length 34 inches. For 706 with D310 Diesel Engine. OEM number use MC212 clamp, use R1802 rain cap. (Item #: 100810, Ref: R1075) $68.00

Muffler - Vertical Exhaust Inlet inside diameter 2 15/16 inch, outlet outside diameter 3 inches, overall length 40 inches. For 706, 756 with D310 Diesel Engine 826 with D358 Diesel Engine. OEM number use R1756 clamp, use R1805 rain cap. (Item #: 100814, Ref: R1648) $75.00

Muffler - Vertical Exhaust Inlet inside diameter 2 15/16 inch, outlet outside diameter 3 inches, overall length 42 inches. For 706, 756 with D310 Diesel Engine 826 with D358 Diesel Engine. OEM number use R1756 clamp, use R1805 rain cap. (Item #: 100819, Ref: R1649) $138.00

Muffler Clamp With Hardware - Muffler clamp with hardware. 2 1/2". For tractor models 300, 330, 340, 350, 400, 450, 460, 504, 560, 606, 660, 706, H, HV, M, MD, Super H, Super HV, Super M, Super MD, Super MTA, Super W6, W4, W6, WD6. (Item #: 178185, Ref: 350602R1) $12.00

$Farmall 706 Muffler Eliminator - 2-3\8 inch X 24 inch, Straight Chrome$
Muffler Eliminator - 2-3/8" X 24", Straight Chrome - For International / Farmall tractor models H, M, Super H, Super M, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Inlet I.D: 2-3/8", O.D. Pipe: 3", Length: 24", Straight Pipe, Chrome Plated, Eliminates Muffler, (Item #: 115491) $81.17

Fuel System / Air Intake

Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple International/Farmall models. Replaces: 383734R2, 625043C1. (Item #: 121925, Ref: T23262) $6.60

Air Cleaner Hose - For International / Farmall tractor models 454, 544, 574, 606, 656, 674, 706, 756, 766, 806, 826, 856, Compatible with International Construction and industrial models 2400, 2500, Replaces International OEM number 382400R1, A: 2.25", B: 2.50", (Item #: 163507) $13.00

$Farmall 706 Cable - Fuel Stop \ Shutoff$
Cable - Fuel Stop / Shutoff - For International / Farmall tractor models 706 (Farmall diesel, s/n 37237-earlier and International diesel, s/n 5274-earlier), 756 (diesel), 2706 (diesel, s/n 5274-earlier), 2756 (diesel), Replaces International OEM number 396387R91, Length: 80", (Item #: 161926) $34.70

Carburetor Float - Float. For Updraft International Carburetors with throat size 1-1/4 inch or 1-3/8 inch. Dimensions: 2 3/16 inch length x 1 3/16 inch height, outside diameter 3 1/2 inches. For 2606, 2706, 300, 350, 400, 450, 460, 560, 600, 606, 650, 660, 706, M, MV, O6, OS6, Super H, Super HV, Super M, Super MTA, Super W6, Super W6TA, W400, W450, W6, W9, WR9, WR9S. (Item #: 107990, Ref: 47398DX) $20.20

Carburetor Kit, Basic - Kit for IHC 406804R91, 361525R92, 363741R93, 367258R92, 380956R96, 381984R95, 386424R96, 388297R94, 372723R92, 379813R95, 396197R93, 539575R91, 388425R96, 533622R91, 358065R91, 358554R91, 356948R92, 357231R92 carbs on 2544, 300, 350, 460, 544, 560, 656, 660, 706, 756, 766, 806, Super H, Super M, Super W-4. (Item #: 100731, Ref: IH103) $17.50

Carburetor Kit, Complete - Complete Carburetor Kit. For IH Carburetor number: 388424R96 or 396197R92. Includes Basic Kit, plus fuel and air adjusting screws. Contains all parts shown. For tractor models 656, 706, 756 and 766. (Item #: 178521, Ref: R7870) $57.00

Carburetor Kit, Comprehensive - This comprehensive carburetor kit is for IH Carburetor number: 388424R96 or 396197R92. It contains all the parts shown. For tractor models 656, 706, 756 and 766. (Item #: 183889, Ref: R7871) $94.00

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 388296R92, 388141R92, 397224R93. For the following tractor models: 656, 706. Add $125.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203329, Ref: 1445-CARB) $442.01

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 388424R96, 388425R92, 381419R92, 381419R91, 396198R91. For the following tractor models: 706, 756. Center-to-Center on the mounting bolts is 2 5/8 inches. Add $200.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203331, Ref: 1450-CARB) $523.00

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 396197R93, 381419R91, 388424R96, 396197R96, 396198R92. For the following tractor models: 706, 756. Add $200.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203331, Ref: 1452-CARB) $399.00

Choke Cable - 71 inches total length. For tractor models (Farmall 400, 450), 460 Grove, (Farmall 560 serial number 14819 and up, IH 560 serial number 2071 and up), (660 serial number 1349 and up), (706, 756, 806, 826, 856 all LP). Replaces 363710R93. (Item #: 113396, Ref: 374218R92) $20.10

Choke Cable - For International / Farmall tractor models 300, 350, 656, 666, 686, 706, 756, 826, 2656, 2706, 2756, 2826, Replaces International OEM number 363709R95, Overall Length: 63", Mount to Mount: 60", (Item #: 113539) $20.40

Diesel Fuel Filter - Fuel filter element, cartridge type, final filter. For 2504, 2606, 2656, 2706, 2806, 330, 340, 460, 504, 560, 606, 656, 660, 706, 806. Replaces 610309C91 (Item #: 111124, Ref: 304101R91) $18.10

Foot Pedal Accelerator Kit - For International / Farmall tractor models 706, 756, 2706, 2756, Replaces International OEM number 385571R11, 399229R1, 370278R1, 385576R1, 213-515, 358580R1, 385577R11, Contains; cover [385571R11], Pedal [399229R1], Spring [370278R1], Rod [385576R1], Clevis [213-515], Stop [358580R1], Lever [385577R11], (Item #: 112221) $130.00

Fuel Filter - Used on international 50 (w/ C175 Engine), 400 (w/ C264 Engine), 404 (w/ C135 Engine), 450 (w/ C281 Engine), 504 (w/ C153 Engine), 606 (w/ C221 Engine), 650 (w/ C350), 656 (w/ C263 Engine), 660 (W/ C263), 706 (w/C291 Engine or C263 Engine), 756, 806 (w/ C301 Engine), 826 (or 856 w/ C301 Engine), 856 (w/ C301 Engine), 2404 (w/ C135 Engine), 2504 (w/ C153 Engine), 2606 (w/C221 Engine), 2706 (w/ C263 Engine), 2756 (w/C291 Engine), 2806, 2826, 2856 (w/ C 301 Engine). This filter measures O.D.: 1-7/8 inches (47.6mm), I.D.: 23/32 inches (18.3mm), Length: 2-15/32 inches (62.7mm) Replaces 64400-DC, 64400DC, PF224 (Item #: 126044) $17.90

$Farmall 706 Fuel Filter \ Spin On$
Fuel Filter / Spin On - For tractor models 385, 454, 484, 544, 574, 664, 674, 684, 685XL, 686, 706, 756, 785, 786, 826, 884, Hydro 86, 2400, 2500, 3088, 3288. (Item #: 125844, Ref: 3132428R2) $18.50

Fuel Injection Line #3, Used - For International tractor models 460, 560, 606, 660, 706, 2606, 2706, Compatible with International Harvester(s) 414, 420, Compatible with International Engine(s) D236, D282, D301, Replaces International OEM number 278704R11, For a new version of this item use Item #: 162714, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441152) $16.01

Fuel Injection Pump, Remanufactured, Roosa Master, DBGFC631-19AJ - For International / Farmall tractor model 706, Replaces Roosa Master manufacturer number DBGFC631-19AJ, DBGFC631-40AJ, DBGCF631-20AJ, DBGFC631-74AE, DBGFC631-20AJ, (Item #: 200699) $1310.01

Fuel Injector Nozzle Sleeve - This Fuel Injector Nozzle Sleeve is used on D155, D179, D206, D239, D246, D268, DT268, D310, and D358 Engines. Brass Construction, 3.190 inch overall length 0.386 inch injector tip inside diameter. Replaces 73055344, 3055344R1 (Item #: 165847, Ref: 3055344R1) $24.60

Fuel Injector Tube - For International / Farmall tractor models 686, 706, 756, 786, 826, 886, 3088, 3288, Compatible with International Combine (s) 715, 815, 915 (Diesel), Replaces International OEM number 731320205, Injector tip: 0.439", (Item #: 156872) $55.00

Fuel Line With FTG - Fuel line for gas engines is 41 inches long. These gas lines easily flex, eliminates metal tubing, vibration. For 460, 560, 706, 806 (Item #: 112539, Ref: FLM41) $29.10

Fuel Pipe Coupling Nut - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, F12, F14, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, Super A, Super C, Super H, Super M, Super W4, TD6, TD9, W4, W6, W12, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, 460, 504, 560, 600, 606, 650, 656, 660, 686, 706, 756, 806, 826, 856, 2444, 3514, 3616, Compatible with International Combine (s) 303, 403, 503, 615, 715, Replaces International OEM number 29899D, 700155R11, 700153R11, 1/2"-20 Hi-duty tube fitting, 5/16" O.D., (Item #: 112642) $2.40

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $5.95

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 13193D. Gasket may be rubber or cork, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.70

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. Replaces A11209 and 357958R1. Will fit the following modelsusing/ 1.280 inch long glass bowl: A, Super A, Super A-1, Super AV, Super AV-1, B, BN, C, Super C, Cub, Cub Lo-Boy, 154, 184, 185, Hydro 100, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 404, 424, 444, 454, 460, 464, 504, 544, 574, 606, 656, 656, 674, 706, 756, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1566. Replaces A11209 and 357958R1. (Item #: 105382, Ref: 9N9162) $3.20

Fuel Sending Unit - With Seal. For GAS tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, (2544 gas), 2656, 2706, 2756, 2806, 2826, 2856, (544 gas), 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86. NOT COMPATIBLE WITH ETHANOL BLENDS. Replaces: 5378427R1, 378427R92, 378427R93, 378427R94 (Item #: 107954, Ref: 378427R94) $43.00

Fuel Strainer Assembly - Fuel Strainer without valve for 424, 2424, 444, 244 gas tractors. Also used in 1026, 1066, 1206, 1256, 1456, 1466, 1566, 656, 706, 756, 806, 826, 856 diesel models with an auxiliary fuel tank. Fuel Strainer Assembly with 1/8 inch female pipe connections. Replaces 614421R91. (Item #: 112592, Ref: 614421R91) $30.50

Injection Line, Cylinder 1 - For tractor models (460, 606 with D236 engine), (560, 660 with D282), (656, 706 with D282 engine and Roosa Master Pump). Nut 250617R2 and sleeve 250610R2 not included, sold separately. Replaces 278702R11 (Item #: 162712, Ref: 278702R21) $26.60

Injection Line, Cylinder 2 - For tractor models (460, 606 with D236 engine), (560, 660 with D282), (656, 706 with D282 engine and Roosa Master Pump). Nut 250617R2 and sleeve 250610R2 not included, sold separately. (Item #: 162713, Ref: 278703R11) $19.90

Injection Line, Cylinder 3 - For tractor models (460, 606 with D236 engine), (560, 660 with D282), (656, 706 with D282 engine and Roosa Master Pump). Nut 250617R2 and sleeve 250610R2 not included, sold separately. (Item #: 162714, Ref: 278704R11) $20.90

Injection Line, Cylinder 4 - For tractor models (460, 606 with D236 engine), (560, 660 with D282), (656, 706 with D282 engine and Roosa Master Pump). Nut 250617R2 and sleeve 250610R2 not included, sold separately. (Item #: 162715, Ref: 278705R11) $25.60

Injection Line, Cylinder 5 - For tractor models (460, 606 with D236 engine), (560, 660 with D282), (656, 706 with D282 engine and Roosa Master Pump). Nut 250617R2 and sleeve 250610R2 not included, sold separately. (Item #: 162716, Ref: 278706R11) $25.30

Injection Line, Cylinder 6 - For tractor models (460, 606 with D236 engine), (560, 660 with D282), (656, 706 with D282 engine and Roosa Master Pump). Nut 250617R2 and sleeve 250610R2 not included, sold separately. (Item #: 162717, Ref: 278707R11) $30.40

Injector - This remanufactured injector comes as pictured with injector, o-ring and 2 metal flat washers. For tractor models 340, 460, 560, 656, 660, (706 with D282 engine). Replaces 279263R91, 310388R91. DOES NOT INCLUDE GLOW PLUG OEM part number 304131R2. Refundable $75 core charge will be added to your order. Replaces 310389R1, 332496R91, 7332495, 332495R91, 332495R91 (Item #: 204407, Ref: 332495R91) $162.01

Injector - For tractor models 2706, 2756, 686, 756, Hydro 86, (706 with D310 engine). Replaces 3055422R93. Add $30.00 for core charge. (Item #: 207255, Ref: 735252C91) $122.01

Injector Nozzle - For tractor models 454, (464 up to serial number 027205 with nozzle number DLLA150S417), 544, 560, 574, 656, 660, 664, 674, 706, 786, 826, (886 serial number 14472 and up), 2544, 2656, 2706, 2826. (Item #: 179950, Ref: 3055428R92) $37.80

Insulating Fuel Tank Pad - For International / Farmall tractor models Hydro 70, Hydro 86, M (s/n FBK24215-later, Gas), MD (s/n FBK24215-later, Gas), Super H (Gas), Super HV (Gas), Super M (Gas), Super MTA (Gas), 240 (Farmall s/n 501-2293, IH s/n 501-6137), 300 (Gas), 330, 340 (Farmall s/n 501-3449, IH s/n 501-3024), 350 (Gas), 404 (Gas), 424 (Gas and Diesel), 444 (Gas and Diesel), 544 (Gas and Diesel), 606 (Gas and Diesel), 666, 686, 706 (Gas and Diesel), 756 (Gas and Diesel), 766 (Gas and Diesel), 826 (Gas and Diesel), Compatible with International Construction and industrial models 2404 (Gas), 2424 (Gas and Diesel), 2444 (Gas and Diesel), 2504 (Gas and Diesel), Replaces Case IH OEM number 60671D, (Item #: 163917) $3.10

No
Picture
Nut, Injection Pipe, Nozzle End - Replaces 250617R1, 74504409, 12627A, 367339R1, for tractor models 460, 606, 560, 660, 656, 706. (Item #: 162719, Ref: 250617R2) $7.20

Sediment Bowl Assembly - Fuel Strainer assembly with 2.25 inch bowl, 1/8 inch pipe thread to fuel line, 3/8 inch pipe to tank for gasoline tractors: H, HV, M, Super M and MTA, O4, OS4, W4, 460, 560, 600, 650, 656, 660, 706, 756, 766, 806, 826, 856. Replacement bowl available as part S.65504. Replaces OEM numbers 358245R91 and 370832R91. (Item #: 105393, Ref: S.61581) $22.00

No
Picture
Sediment Bowl Assembly - For International / Farmall tractor models M, MD, MDV, MV, 460, 560, 656, 660, 706, 766, 806, 826, 856, 2826, 2856, Replaces International OEM number 358245R91, 362040R91, 370832R91, 61782C91, Replaces OEM number 13194D, 70208205, 70237946, 70239167, 5/8" x 18 Pitch Male Thread, Short Bowl Type, Outside Diameter: 2 1/8", (Item #: 177024) $49.70

Sediment Bowl Assembly Glass Bowl - Glass bowl with an outside diameter is 2 1/8 and an overall height of 2 3/8. For the following models using a 2 3/8 inch tall glass bowl: O12, O14, O4, O6, OS4, OS6, T340, T5, T6 (up to serial number 29964), W12, W14, W30, Super W4, W4, W40, Super W6, Super W6TA, W6, Super W9, W9, WR9S, F12, F14, F20, F30, 100, 130, 140, 200, 230, 300, 340, 350, 400, W400, 450, W450, 460, 560, 656, 660, 706, 756, 766, 806, 826, 856. Replaces 51344VA and 357957R1. (Item #: 105365, Ref: S.65504) $5.50

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: 13194D, 25854, 49923D (Item #: 105364, Ref: 49923D) $3.50

No
Picture
Sleeve, Injection Pipe - Replaces 250610R1, for tractor models 460, 606, 560, 660, 656, 706. (Item #: 162718, Ref: 250610R2) $6.90

Throttle Handle - This Throttle Handle comes with Nickel Plated Plug. Red with black handle and nickel plug (1 inch plug diameter) 11.25 inches long, 1-3/8 inches wide, 1-7/8 inches thick, 1/2 inch diameter shaft, 1/8 inch pin slot. Fits: 1206, 21206, 2706, 2806, 4100, 4156, 4166, 4186, 656, 706, 806; Replaces: plug: 192105, 382682R1, handle: 391666R1. (Item #: 179411, Ref: 391666R1) $136.00

Upper Throttle Shaft With Nut - This Upper Throttle Shaft with nut is bare steel 11 inches long x 1/2 inch diameter. It has a 5/16 inch diameter on lock nut end and a 3/8 inch diameter on pin end. Fits 1026, 1206, 1256, [1456, 21456 (Diesel)], 21026, 21206, 21256, 2706, 2756, 2806, 2826, 2856, 706, 756, 806, 826, 856. Replaces: 382683R11, 404238R11. (Item #: 126766, Ref: 404238R11) $70.00

Gaskets

Fuel and Temperature Combo Gauge - Gauge combination DOES NOT HAVE IH Logo. Used on models (706, 806, 1206, 826 diesel), 544, 656, (756 diesel), 664, (666 diesel), 4166, (686 diesel), 4186, Hydro 70, Hydro 86, Ind. (2706, 2806, 21206, 2826 diesel), 2544, (2656, 2756 diesel). SPADE terminals. Uses a 5/8 inch x 24 thread probe, Replaces 1546480C1, 396380R91, 539293R1, 382733R93, 396380R91, 397939R92, 1546480C1 (Item #: 108043, Ref: 396380R91) $100.00

Seal and Bushing Kit - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2856, 3088, 3288, 3688, 4100, 4156, 4166, 4186, 21206, 21256, 21456, All TA Tractors, (Item #: 168459) $24.90

Gauges

Fuel Gauge - For tractor models 766, 966, 1066, 1466, 1468, 1566, 1568, 4366, 4386, 4568, 4586, Hydro 100.The 12 Volt Negative Ground fuel gauge is calibrated properly for 460, 560, and 660 with a Stewart Warner sending unit, but this fuel gauge has a different appearance. Gauge must be grounded to work properly. You will need to run an extra ground wire from the threaded clamp terminal to an existing bolt to attain a proper ground. 32-244 Ohm. Use with 378427R91 sending Unit. Replaces 533992R1 H142794. (Item #: 121190, Ref: 533992R1) $42.60

No
Picture
Fuel Gauge with Sending Unit - For International / Farmall tractor models Hydro 100, 460, 544, 560, 656, 660, 706, 756, 766, 806, 826, 856, 966, 1026, 1055, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4568, Compatible with International Construction and industrial models 21206, 21256, 21456, Replaces International OEM number 5378427R1, 533992R1, 378427R92, 378427R93, 378427R94, 378426R91, For replacement sending unit use Item #: 121190, (Item #: 135041) $81.00

Fuel Sending Unit - This fuel sending unit includes a seal. For tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, (2544 gas), 2656, 2706, 2756, 2806, 2826, 2856, (544 gas), 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86. Compatible with Ethanol blend to 15%. 32-244 Ohm. Replaces: 5378427R1, 378427R92, 378427R93, 378427R94 (Item #: 107954, Ref: 378427R94EB) $43.00

Fuel Sending Unit - This Sending unit operates from 32 Ohm full to 244 Ohm empty. It will not work work with 0-70 Ohm fuel gauges. It is for 12 volt systems. Use with Stewart Warner Fuel Gauges like 533992R1. Replaces: 378427R91, 84203050 (Item #: 107954, Ref: 378427R91) $43.00

Instrument Gauge Cluster - For International / Farmall tractor models 706, 806, 1206, 2706, 2806, 21206, Replaces International OEM number 382732R91, 382732R92, 382732R93, 382732R94, 396380R91, 396380R92, 396380R93, Includes Fuel Gauge, Temperature Gauge, (Item #: 115572) $129.00

No
Picture
Tachometer Cable - Overall Length 57.5 inches. For tractor Models: 2500A gas, 2706 gas, 2756 gas, 2806 gas, 2826 gas hydro, 2856 gas, Hydro 70 gas, Hydro 86 gas, 385 diesel, 484 diesel, 485 diesel, 544 gas, 573 diesel, 584 diesel, 585 diesel, 656 gas and diesel, 666 gas, 674 diesel, 684 diesel, 685 diesel, 686 gas, 706 gas, 756 gas, 766 gas, 784 diesel, 785 diesel, 806 gas, 826 gas hydro, 844 diesel, 856 gas, 885 diesel. (Item #: 111325, Ref: 1970820C1) $16.30

No
Picture
Tachometer Cable - This tachometer cable is 58 3/8 inches long for models: Hydro 84, 3514 with C175 gas, (385, 484, 485, 584, 684, 784, 785, 884 all without cab), (666, 686, 706, 756, 766 806, 826, 856 all with gas), 544 rowcrop with gas, 656 gas or diesel, (hydros 2400, 2500, 454, 464, 574, (585, 685, 885 without cab. Replaces 393326R92, 529234R1. (Item #: 111325, Ref: 384843R91) $16.30

Tachometer Cable - For International / Farmall tractor models Hydro 100, 706 (Farmall s/n 32237-later), 756, 826 (Gear Drive), 966, 1066, 1466, 1566, 2706 (s/n 5274-later), 2756, 2826 (Gear Drive), Replaces International OEM number 396386R93, Load End: .77", Drive End: .56", Overall Length: 86-3/4", Mount to Mount: 85-1/2", (Item #: 108038) $35.10

Tachometer Drive Gear Assembly - This Tachometer Drive Gear Assembly has 13 Teeth and is 1.765 inches overall length. Fits C157, C175, C200, C221, C263, C291, C301, D166, D188, D236, D282 and D301 engines. Replaces 368245R12, 368245R11, 178575H1 (Item #: 164574, Ref: 368245R11) $61.00

Tachometer Drive Housing Fitting - This Tachometer Drive Housing Fitting is 3/4 inch - 20 pipe thread to 7/8 inch - 18 thread, 1.407 inches overall length. Fits C157, C175, C200, C221, C263, C291, C301, D166, D188, D236, D282 and D301 engines. Replaces 368246R1, 178309H1 (Item #: 164575, Ref: 368246R1) $24.85

Tachometer Gauge, Remanufactured, 388588R91 - For International / Farmall tractor models 706, 2706, Replaces International OEM number 388588R91, (Item #: 203962) $184.01

Tachometer Gauge, Used - For International tractor models 706, 756, 766 (s/n 10934-earlier), 806, 826, 1206, 1256, 1456, 2706, 2756, 2806, 2856, 21206, Replaces International OEM number 103151A1, 103152A1, 388588R91, 388589R91, 398095R91, 66748C1, Black Face, IH Logo on Face, For a new version of this item use Item #: 121706, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 426978) $60.01

Tachometer Gauge - White Face - MPH - For International / Farmall tractor models 706, 756, 766 (s/n 10934-earlier), 806, 826, 1206, 1256, 1456, 2706, 2756, 2806, 2856, 21206, Replaces International OEM number 103151A1, 103152A1, 388588R91, 388589R91, 398095R91, 66748C1, White Face, MPH on Face, For tachometer gauge with white face and IH logo use Item #: 112544, (Item #: 126978) $87.00

Tachometer - With IH Logo - Tachometer assembly with BLACK face. Tractors: 706, (766, 966, 1066, Hydro 100 to serial number 10934), 806, 856, 1206, 1256, 1456, 2706, 2806, 21206. Black background with white lettering. (Item #: 388588R91-Logo) $103.50

Tachometer - Without IH Logo - Tachometer assembly with BLACK face. Tractors: 706, (766, 966, 1066, Hydro 100 to serial number 10934), 806, 856, 1206, 1256, 1456, 2706, 2806, 21206. Black background with white lettering. (Item #: 121706, Ref: 388588R91) $57.70

Hitch / Drawbar

$Farmall 706 3 Point Hitch Kit, LH\RH$
3 Point Hitch Kit, LH/RH - For tractor models 706, 756, 766, 806, 826, 966. Consist of: 523861R2 handle, 223315 duckhead, 382165R11 screw, 395142R1 housing 11.750" long. (Item #: 127032, Ref: 223308) $189.00

Center Link Handle - Used on International Models: 21026, 21206, 2606, 2706, 2806, HYDRO 100, HYDRO 70, HYDRO 86, 100, 1026, 1066, 1206, 1256, 130, 140, 1466, 1468, 1566, 1568, 2504, 404, 504, 544, 606, 644, 656, 664, 666, 686, 706, 744, 756, 766, 806, 826, 844, 844S, 856, 966. This part replaces 392204R1 (Item #: 164316, Ref: 392204R1) $23.90

Control Arm Kit - Control Arm Repair Kit contains, 38256R21 control arm, 380115R2 roller, 383997R1. 56 series tractor models: 756, 856, 1026, 1256, 1456. Early 66 series models: 766, 966, 1066, 1466, 1468, 1566, 786, 886, 986, 1086, 1486, 1586, 3088-3788, 63 For 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 3188, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6488, 6588, 6688, 6788, 706, 756, 766, 786, 806, 856, 886, 966, 986. (Item #: 113499, Ref: 382565KIT) $45.60

Crank Handle, Lift Arm Screw - 3 point or fast hitch. For tractor models 230, 330, 400, 450, 560, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, International Utility: 300, Farmall Rowcrop: 300, International Utility: 340, Farmall Rowcrop: 340, International Utility: 350, Farmall Rowcrop: 350, International Utility: 404, Farmall Rowcrop: 404, International Utility: 460, Farmall Rowcrop: 460, International Utility: 504, Farmall Rowcrop: 504, International Utility: 544, Farmall Rowcrop: 544, International Utility: 606, 656, Farmall Rowcrop: 656, Hydro 100, Hydro 70, Hydro 86. (Item #: 108883, Ref: 523861R2) $9.80

Draft Sensing Crank - LH, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 2756, 2826, 2856, 3088, 3288, 3488, 3688, 21026, Replaces International OEM nos 381927R1, 397097R1, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496761) $234.01

Drawbar - 1 piece, 45.750 inches long, 2.50 inches wide, 1.50 inches high, (2) 1.165 inch diameter holes at 1.500 inches and 10.500 inches from front. Note: This bar can replace 2 piece assembly (397065R1 bar and 393501R11 tube. For tractor models 1026, 706, 756, 806, 826, 856, (766 serial number up to 13892), (966 serial number up to 270896). (Item #: 109486, Ref: 381706R2) $129.00

Drawbar - Used on International tractor models: 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586, this swinging drawbar measures 56 inches long, 2.750 inches wide, and 1.5 inches thick. It has one 1.385 inch diameter hole 1.50 inch from the front. Replaces part numbers 103502C1, 108502C1, 72476C1, 223351. (Item #: 108762, Ref: 223351) $206.00

Drawbar - Measuring 58.125 inches long, 2.750 inches wide and 1.500 inches thick, this swinging drawbar has one 1.390 inch diameter hole 1.875 inches from the front. It is used on International models: 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1566, 1586. Replaces 223352, 108504C1, 72571C1 (Item #: 110123, Ref: 223352) $329.65

Drawbar Hammerstrap - For International / Farmall tractor models Hydro 100, Hydro 186, 560, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 6388, 6588, 6788, 21026, Replaces International OEM number 400297R1, Pin hole is 5-1/2" from bend in strap, For use with spacer 368514R1 (110041), (Item #: 110042) $192.87

Drawbar Hammerstrap Spacer - For International / Farmall tractor models Hydro 100, Hydro 186, 560, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 6388, 6588, 6788, 21026, Replaces International OEM number 368514R1, (Item #: 110041) $11.60

Drawbar Pin, Front - Measure before ordering as many models listed used more than one pin. This headed pin measures 3.437 inches long with a 1.125 inch diameter. In some applications it is used with 49139D lock plate, sold separately. Used on H serial number 39937 and above, Hydro 70, Hydro 86, Super H, 300, 350, 404, 504, 544, 606, 656, 664, 666, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 2404, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21206, 21256, 21456. Replaces international part number 57654D (Item #: 112537, Ref: 57654D) $16.20

Drawbar Pin Retainer Plate - Used on the following Farmall / International models: H, M, 560, 806, 1066, MD, MTA, W6TA, W9, O4, WD9, WR9, Super WDR9, OS4, Super H, Super M, Super MD, Super MTA, Hydro 84, Super W4, Super W6, Super W6TA, Super WD6, Super WD9, W4, W6, WD6, WDR9, WR9S, 300, 330, 340, 350, 400, 450, 454, 460, 464, 504, 544, 574, 600, 606, 650, 656, 660, 664, 666, 674, 706, 756, 766, 826, 284, 856, 966, 1026, 385, 484, 584, 684, 686, 784, 884, Super MDTA, Super WD6TA, Super WR9S, Super W9, WD6TA, this part measures 1.480 inches long, 1 inch wide and has a 0.377 inch hole diameter and 0.193 inch thick. Many of the listed models used a round plate rather than the rectangular one. This part will replace the round version. Replaces OEM numbers 132794H1, 491390, 49139D, 57654D, 57655D, 58657D (Item #: 112643, Ref: 49139D) $7.62

Drawbar Support Casting - Fits fast hitch tractors. For tractor models 1026, 706, 756, 766, 806, 826, 856, 966. (Item #: 110287, Ref: 389064R1) $284.00

Drawbar Support Casting - Used with 2 piece drawbar, 1 inch x 3.5 inch x 16.5 inch. For tractor models 1026, 1206, 706, 756, 766, 806, 826, 856, 966. (Item #: 108541, Ref: 539749R1) $359.00

Drawbar Support Casting - Used with 1 piece drawbar. For tractor models 1026, 706, 756, 766, 826, 856, 966, Hydro 86. Replaces 72392C1. 10.250 inches high. Plate 1 inch x 3.5 inch x 16.5 inch. (Item #: 109485, Ref: 383385R3) $266.00

Drawbar Support, Front - For tractor models 1026, 21026, 2706, 2756, 2826, 2856, 706, 756, 826, 856, (766 SN# up to 13892), (966 SN# up to 27089), 806, 2806. (Item #: 172677, Ref: 381707R21) $297.00

Drawbar Support Plate - Used with 2 point Fast Hitches with Swinging Drawbars, this part Replaces 389065R1 on 706, 756, 766, 806, 826, 856, 966, 1026, 1206 (Item #: 173026, Ref: 389065R1) $79.92

Drawbar Support Plate - Used with one piece and heavy duty drawbars on International models 706, 756, 766, 806, 826, 966, 1026, 1206. (Item #: 111205, Ref: 400714R1) $129.00

No
Picture
Drawbar Support Plate, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 2706, 2756, 2826, 2856, 21026, Replaces International OEM number 400714R1, Use with 1 piece or heavy duty drawbar, For a new version of this item use Item #: 111205, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435531) $64.01

No
Picture
Drawbar Tube - For International / Farmall tractor models 706 (s/n 19250-later and with 3 Point), 756 (s/n 13892-earlier), 766 (s/n 13892-earlier), 806 (s/n 14500-23000 and with 3 point), 826 (s/n 13892-earlier), 856 (s/n 21116-later and with 2 Point and 3 Point), 966 (s/n 270896-earlier), 1026 (s/n 13892-earlier), Replaces International OEM number 393501R11, Length: 34.875", (Item #: 108793) $318.00

No
Picture
Drawbar, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1566, 1586, Replaces International OEM number 223352, 108504C1, 72571C1, Length: 58-1/8", Width: 2.750, Height: 1-1/2", 1.390" diameter hole 1.875" from front, For a new version of this item use Item #: 110123, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435468) $184.01

Drawbar with Hammer Strap Holes - The measurements on the swinging drawbar with hammerstrap holes are: Length: 62.250 inches, Width: 3 inches, Height: 1-1/2 inches. It has three 1.390 inch diameter holes located 1.750 inches, 5.937 inches and 15.312 inches from the front. Used on International models: 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1586. (Item #: 110328, Ref: 223353) $252.00

Duckhead - This leveling screw pivot, also know has duckhead, fits 1 inch screw. For tractor models Hydro 100, Hydro 70, Hydro 86, 1026, 1066, 1466, 1468, 21026, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 544, 656, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966. (Item #: 172990, Ref: 383990R2) $105.00

Duckhead Pivot Assembly - Duckhead Pivot Assembly, 1 inch Screw Includes: duckhead, collar w/ set screws, hardened washer and weld on washer. Fits 1 inch Shaft. Contains 1 - 383990R2, 2 - HD78CUP, and 1 Set screw. (Item #: 122667, Ref: 223315) $69.00

No
Picture
Fasthitch to 3-point Prongs with Cat 2 Balls - For International / Farmall tractor models C, Super C, 200, 230, 544, 606, 656, 706, 756, 806, 826, 856, Set of 2, Category 2 (straight style arm with balls), Additional Handling and Oversize Fees Apply To This Item, (Item #: 114596) $156.00

No
Picture
Fasthitch to 3-Point Quick-Attach Assembly - For International / Farmall tractor models C, Super C, 200, 230, 544, 606, 656, 706, 756, 806, 826, 856, Category 2 Straight arm style, This is a one piece assembly with a U style toplink bracket attached to the arms, Top link not included, For Toplink use Item #: 103163, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 111431) $316.00

Front Drawbar Support, Used - For International tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 2706, 2756, 2806, 2826, 2856, 21026, Replaces International OEM number 381707R21, For a new version of this item use Item #: 172677, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498377) $176.01

Front Stabilizer Eyebolt - Used with 382386R2 stabilizer control arm, this Eyebolt is used on International models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026. Replaces International OEM number 382390R1 (Item #: 108857, Ref: 382390R1) $33.70

Latch, Lower Pull Arm - For tractor models 100, 1026, 1206, 1256, 130, 140, 656, 706, 756, 806, 826, 856. All with fast hitch. (Item #: 110394, Ref: 393500R1) $32.30

Latch Spring, Lower - Used with 382192R1, 398373R1, and 398399R1 Latches, this part is used on three point hitches on the following models: 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21206, 21256, 21456. Replaces 382192R1 (Item #: 109644, Ref: 382192R1) $11.20

Latch Spring, Upper - Used with 382192R1, 398373R1, and 398399R1 Latches, this part is used on three point hitches on the following models: 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21206, 21256, 21456. Replaces 382193R1 (Item #: 108835, Ref: 382193R1) $11.10

Latch, Telescoping Lift Arm - For Cat II 3 point hitch. Models: 100, 1026, 1066, 1086, 1206, 1256, 130, 140, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 986. Lower latch spring 382192R1 and upper latch spring 382193R1 are available separately. (Item #: 109475, Ref: 398373R1) $28.40

Leveling Assembly Kit - Used left or right side for tractors with 2 point fast hitch, this kit contains 1 - 523861R2 handle, 1 - 223315 duckhead, 1 - 389542R11 screw, 1 - 395142R1 housing 11.750 inch long. It is used on International models: 1066, 706, 756, 766, 806, 826, 966 (Item #: 111451, Ref: 223307) $146.00

Leveling Screw - International 706 and 806 tractors with three point hitches used this Leveling Screw. It is 1.000 in diameter, 27.000 inches long, with 5.000 inches of thread. It is used with 395142R1 screw housing. (Item #: 109595, Ref: 382165R11) $76.00

Leveling Screw Housing - Used with 382165R11 Screw, this fork is 11.750 inches long with 1 inch treads. It is used on 2 point fast hitch systems on International 1066, 706, 756, 766, 806, 826, 966. Replaces 395142R1 (Item #: 109480, Ref: 395142R1) $101.00

Leveling Screw Housing - Used with 397096R2 screw, this housing is 16.500 inches long. It is used on Hydro 100, 706 (Late), 756, 766, 806 (Late), 826, 856, 966, 1026, 1206. This part replaces 49B52, 396752R1 (Item #: 109479, Ref: 49B52) $92.00

Lift Arm Latch, Used - For International tractor models Hydro 100, Hydro 186, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 2756, 2826, 2856, 3088, 3288, 3488, 3688, 21026, Replaces International OEM number 398373R1, Use with Lower Spring - 109644 and Upper Spring - 108835, For a new version of this item use Item #: 109475, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409475) $14.51

Lift Arm Latch, Used - For International tractor models Cub Lo-Boy, 100, 130, 140, 504, 544, 606, 656, 666, 706, 756, 766, 806, 826, 856, 966, 1026, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 21026, Replaces International OEM number 393500R1, 523110R1, 523110R2, 517786R1, 517786R11, Use with Lower Spring - 128306 and Upper Spring -128305, Fits On Fast hitch 2pt. Lift Arm, For a new version of this item use Item #: 110394, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410394) $17.01

Lower Lift Arm End, Left - For Category II lower pull arms on models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, this part replaces 398371R11, 382189R11 (Item #: 110392, Ref: 398371R11) $66.00

Lower Lift Arm End, Right - For Category II lower pull arms on models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, this part replaces 398372R11, 382188R11 (Item #: 110190, Ref: 398372R11) $74.00

Lower Link Latch, Used - For International tractor models 706, 806, 2706, 2806, Replaces International OEM nos 382191R1, 382191R2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430455) $41.01

Lower Link Pin Retainer, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21206, 21456, Replaces International OEM nos 406687R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453564) $9.01

Lower Pull Arm Pin - Used on International models Hydro 100, Hydro 186, 544, 656, 706, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2544, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3488, 3688, this part replaces 406685R1 (Item #: 112530, Ref: 406685R1) $20.60

No
Picture
Lower Pull Arm Pin, Used - For International tractor models Hydro 100, Hydro 186, 544, 656, 706, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2544, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3488, 3688, Replaces International OEM number 406685R1, Front Pin, For a new version of this item use Item #: 112530, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435596) $11.01

Pivot Pin, Stabilizer Control Arm - Used with 382386R2 stabilizer control arm. For tractor models Hydro 100, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206. (Item #: 128499, Ref: 383362R2) $38.80

Stabilizer Control Arm - For tractor models (21026, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 706, 756, 766, 786, 806, 826, 886, 966, 986, Hydro 100, Hydro 186 all for Cat II 3 point hitch). (Item #: 109573, Ref: 382386R2) $238.00

Stabilizer Eyebolt, Rear - Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 3088, 3288, 3488, 3688 tractors use this Rear Stabilizer Eyebolt. It fits into the lower lift arm and attaches to the rear stabilizer assembly. This part replaces 382397R1 (Item #: 108858, Ref: 382397R1) $32.60

Stabilizer Yoke, Rear - Used on International Models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 3088, 3288, 3488, 3688, this rear yoke measures 7.250 inches long. Parts associates with this yoke are 382390R1 Eyebolt, 382397R1 Eyebolt, 383363R11 Lockout pin, 384852R1 Pin, 386198R1 Stud, 406244R2 Front yoke, all sold individually. (Item #: 108860, Ref: 406243R1) $43.40

No
Picture
Stub Drawbar - For International / Farmall tractor models 706 (s/n 19250-later w/3 point), 756 (s/n 13892-earlier), 766 (s/n 13892-earlier), 806 (s/n 14500 - 23000 w/3 point), 826 (s/n 13892-earlier), 966 (s/n 270896-earlier), 1026 (s/n 13892-earlier), Replaces International OEM number 397065R1, Length: 26.250", Width: 2-1/2", Height: 1-1/2", (Item #: 108542) $87.00

Sway Limiter Assembly - For tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 3088, 3288, 3488, 3688. (Item #: 108856, Ref: 406242R2) $72.00

Sway Limiter Stud - Measuring 8.125 inches long and 1.125 inches in diameter, this stud is used on International Models: Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 3088, 3288, 3488, 3688 (Item #: 108859, Ref: 386198R1) $28.60

Sway Limiter Yoke Pin - Used on both the forward and rear yokes, this pin measures B - .621 inches in diameter, and A - 2.05 inches long. Used on Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 1026, 2544, 2656, 3088, 3288, 3488, 3688. This pin replaces part number 384852R1 (Item #: 108854, Ref: 384852R1) $3.60

No
Picture
Three Point Lockout Pin - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 3088, 3288, 3488, 3688, Replaces International OEM number 383363R11, (Item #: 173868) $13.30

Top Linkage Bracket - For tractor models 1206, 1256, 706, 756, 806, 856. (Item #: 109648, Ref: 382212R41) $158.00

Torsion Spring Bar, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, Replaces International OEM nos 393243R1, 381925R1, Cat II Hitch, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430235) $147.01

Hydraulic System

Auxiliary Valve Inner Handle Base - This Auxiliary Valve Inner Handle Base is for models 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, (Farmall 2706 serial number 19250 and up, IH serial number 3000 and up), 2756, (Farmall 2806 serial number 14500 and up, IH serial number 3400 and up), 2826, 2856, (Farmall 706 serial number 19250 and up, IH serial number 3000 and up), 756, 766, (Farmall 806 serial number 14500 and up, IH serial number 3400 and up), 826, 856, 966, Hydro 100. (Item #: 163551, Ref: 389164R12) $158.00

Auxillary Valve Outer Handle Base - Replaces OEM numbers 389166R12 and 389166R11, this Auxillary Valve Outer Handle Base is used on International models: Hydro 100, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568 (Item #: 160848, Ref: 389166R12) $123.00

Control Lever Tube, Support Assembly - For tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1566, 1568, 21026, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 706, 756, 766, 806, 826, 856, 966, Hydro 100. (Item #: 160847, Ref: 384111R91) $124.00

No
Picture
Hitch Hydraulic - PUMP - 12 GPM For 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826 (Item #: 104233, Ref: R2965) $441.08

Hitch Pump Drive Gear - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, 21206, 21256, 21456, Replaces International OEM number 133404C1, 23 Teeth, 20 Degree, (Item #: 113421) $113.00

Hitch Pump Drive Gear, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, 21206, 21256, 21456, Replaces International OEM number 133404C1, 382754R2, 23 Teeth, 20 Degree, For a new version of this item use Item #: 113421, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 413421) $35.01

Hydraulic Pump - For International / Farmall tractor models Hydro 186, 664, 666 (need gasket and O-ring), 686 (need gasket and O-ring), 706, 756, 766, 786, 806, 826, 856, 886, 966 (need gasket and O-ring), 986 (s/n 24000-earlier, 28000-later), 1026, 1066, 1086 (s/n 47999-earlier, 55000-later), 1206, 1256, 1456, 1466, 1468, 1486 (s/n 26000-earlier, 29150-later), 1566, 1568, 1586 (s/n 21000-earlier), 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388 (need conversion kit), 3588 (need conversion kit), 3688, 3788 (need conversion kit), 6388 (need conversion kit), 6588 (need conversion kit), 6788 (need conversion kit), 21026, 21206, 21256, 21456, Replaces International OEM number 1949300C1, 70932C91, Main Hitch Hydraulic Pump, Open back to accept piggy-back pump, Backplate and gasket not included, 15 GPM, Max PSI: 2100-2500, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Pump Conversion Kit when needed use Item #: 111636, (Item #: 155066) $530.00

Hydraulic Pump - Pump is open back type to use with piggy-back pump, 17 GPM rating, max PSI of 2250. Not for use in 12 GPM systems. If system is 12 GPM, use 1949296C1. For 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21256, 21456, Hydro 100. Hydraulic Pump is 17 GPM. (Item #: 104237, Ref: 70935C91) $370.00

Hydraulic Pump - 100, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026 Indust/Const, 21206 Indust/Const, 21256 Indust/Const, 21456 Indust/Const, 2706 Indust/Const, 2756 Indust/Const, 2806 Indust/Const, 2826 Indust/Const, 2856 Indust/Const, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, C263 Eng, C291 Eng, C301 Eng, C310 Eng, D282 Eng, D310 Eng, D358 Eng, D360 Eng, D361 Eng, D407 Eng, Hydro 186. Pump is closed back type, 15 gpm rating, 2250 maximum pressure. Replaces 70932C91. (Item #: 104336, Ref: 70932C91) $380.00

Hydraulic Pump Backplate Gasket - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 330, 340, 450, 460, 504, 544, 560, 606, 656, 660, 706, 786, 806, 826, 856, 886, 986, 1026, 1066, 1086, 1206, 1466, 1468, 1486, 1566, 1568, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3488, 3688, 21026, 21256, 21456, Replaces International OEM number 71265C1, 371543R1, 371543R2, For Pumps 70631C91, 70932C91, 70933C91, 70935C91, (Item #: 111636) $4.90

Hydraulic Pump Drive Gear - Used on Farmall / IH models: 706, 756 (serial number Farmall 17635-earlier, International 8424-earlier), 856 (serial nuber Farmall 27286-earlier, International 9492-earlier), 1206, 1256, 2706, 2756 (serial number Farmall 17635-earlier, International 8424-earlier), 2806, 2856 (serial number Farmall 27286-earlier, International 9492-earlier), 4100, 21206, 21256. This Gear has 19 teeth and 20 degree pitch to the teeth. Replaces 382332, 382332R1 (Item #: 173027, Ref: 382332R1) $150.00

Hydraulic Pump Drive Gear - For 706, Farmall 756 up to serial number 17635, International 756 up to serial number 8424, 806, Farmall 856 up to serial number 27286, International 2856 up to serial number 9492, 1206, 1256, 2706, Farmall 2756 up to serial number 17635, International 2756 up to serial number 8424, 2806, Farmall 2856 up to serial number 27286, International 2856 up to serial number 9492, 4100, 21206, 21256. Hydraulic Pump Drive Gear with 20 degree tooth angle. (3180R) (Item #: 173027, Ref: 382332) $150.00

Hydraulic Pump, Hitch - PUMP - 17 GPM For 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826 (Item #: 104237, Ref: R2966) $370.00

No
Picture
Hydraulic Pump Kit - For International / Farmall tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2706, 2756, 2806, 2826, 2856, 4166, 21026, 21206, 21256, 21456, Replaces International OEM number 1949304C1, 382330R91, 382330R92, 391353R92, 527397R91, 527397R92, 527397R93, 64801C91, 393877, 384443R92, 9 GPM, Max Pressure: 2100, Kit Includes: MCV hydraulic pump, MCV gasket kit, and KCV relief valve, (Item #: 176736) $700.00

Hydraulic Pump, Used - For International tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1466, 1468, 1566, 1568, Replaces International OEM number 527397R91, 382330R91, 382330R92, 391353R91, 391353R92, 527397R92, 527397R93, 64801C91, 1949304C1, 9 GPM, For a new version of this item use Item #: 104337, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498358) $140.01

Knob, Hydraulic Position Control - For tractor models 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. (Item #: 166950, Ref: 382801R1) $11.70

Knob, Hydraulic Remote - For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. (Item #: 126949, Ref: 389168R1) $8.50

Knob, Hydraulic Sensitivity Control - For tractor models 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. (Item #: 128572, Ref: 382805R1) $7.50

MCV Gasket Set - Used on 706, 756, 786, 806, 826, 856, 886, 986, 1086, 1206, 1256, 1456, 1486, 2706, 2756, 2806, 2826, 2856, 4156, 21206, 21256, 21456 this gasket set is used in repairing Multiple Control Valves. This part replaces IH part numbers 393877R93, 393877 (Item #: 114588, Ref: 393877R93) $70.00

MCV Spring Kit - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1466, 1486, 1566, 2706, 2806, 2856, 3088, 3388, 3588, 3688, 6388, 6588, 21256, 21456, (Item #: 168439) $52.00

Multiple Control Valve, Used - For International tractor models 706 (International s/n 501-4892, Farmall s/n 501-19074), 806 (International s/n 501-4892, Farmall s/n 501-19074), 2706, 2806, Replaces International OEM nos 391948R93, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438863) $270.01

Power Beyond Block Control End Cover - Used on 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1456, 1466, 1468, 1566, 1568, 2706, 2756, 2806, 2826, 2856, 21206, 21456 for Power Beyond (Remote Hydraulics). This part replaces 391673R1, 391673R1, 398315R91. Port size is 7/8-14 NF Right Hand. (Item #: 112516, Ref: 398316R1) $481.00

Pump - Hydraulic pump, on clutch housing for power supply and multiple control value. 9 GPM. IHC.Tractors: 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2706, 2756, 2806, 2826, 2856, 4166, 4186; Industrial: 21026, 21206, 21256, 21456. Replaces 133440C92, 527397R93. (Item #: 104337, Ref: 527397R93) $275.00

Remote Coupler, Remanufactured, 536761R91 - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 100, Hydro 186, 544, 606, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21256, 21456, Replaces International OEM number 536761R91, 544786R3, 544786R91, 544786R92, 544786R94, 544786R95, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 207002) $825.01

Remote Valve Assembly, Used - For International tractor models Hydro 70, Hydro 86, 404, 504, 544, 606 (s/n 6754-later), 656, 664, 666, 686, 706, 756, 806, 826, 856, 1206, 1256, 2404, 2504, 2544, 2606 (s/n 6754-later), 2656, 2706, 2756, 2806, 2826, 2856, 4100, 21206, 21256, Replaces International OEM nos 390826R94, 390826R91, 390826R92, 390826R93, Open on 1 side only, 1500 psi to 2000 psi, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496748) $349.01

Selector Valve Drive Stem - For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 1586, 21206, 21256, 21456, 2706, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986. (Item #: 172678, Ref: 382319R1) $48.00

Stabilizer Yoke, Front - Measureing 3.875 inches long, this yoke is used on Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 3088, 3288, 3488, 3688. Parts associated with this yoke are: 382390R1 Eyebolt, 382397R1 Eyebolt, 383363R11, Lockout pin, 384852R1 Pin, 386198R1 Stud, 406243R1 Rear yoke, all sold individually. (Item #: 108861, Ref: 406244R2) $55.00

Valve Operating Arm - Used on International models Hydro 100, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, the Valve Operating Arm replaces 383243R92, 383243R91 (Item #: 163552, Ref: 383243R92) $45.70

Valve Spool Actuator - Used on International models: Hydro 100, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21206, 21256, 21456. (Item #: 163550, Ref: 384112R11) $75.00

Valve Spool Actuator, Used - For International tractor models Hydro 100, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21456, Replaces International OEM number 384112R11, For a new version of this item use Item #: 163550, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436340) $20.01

Lights

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: 126470C1, 131203C1, 131348C1, 131508C1 (Item #: 111242, Ref: 28A116) $12.90

Headlight Washer - Used with light part number 164089AS. Replaces 388947R1. For the following tractors: 806, 1066, 2606, 2706, 2756, 2806, 2826, 666, 706, 756, 766, 826, 856, 966, 1026, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 786, 886, 986, 1086, 1486, 1586, 21456, 21256, 21206 (Item #: 154899, Ref: 504781M1) $5.30

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $35.00

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 131508C1, 134039H1, 144072H1, 21-521R1, 371461R91, 373662R1, 373662R91, 394770R2, 535850R1, 635959R91, 725-0133, 725-0222, 725-0588, 80627C1, 9410891, 86594207, 87779219, 925-0222. (Item #: 111241, Ref: 373662R91) $9.10

Light Switch, 12 Volt - For tractor models (Cub serial number 224401 to 227700), (Cub Lo-Boy serial number 18701 to 21575), (140 from serial number 26801 and up), 1206, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, 354, 404, 424, 444, 454, 464, 504, 574, 606, 674, 706, 806, 1256, 2300, 2400A, 2404, 2424, 2444, 2500A, 2504, 2606, 21256, 3444, 4100, 4156, 403. (Item #: 125705, Ref: 376851R91) $27.30

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $18.50

Sealed Beam Bulb 12V - Sealed beam bulb, 12 volt, 5-3/4 inch diameter, 35 watt, Sealed Beam. Trade number 4419. Replaces: 310062, 230252, 2084379, 70230252, T20958, TO17074, 371443R91, 002803M91, 1038428M91, 1751347M91, 1754916M91, 102213A, 30-2020521 (Item #: 111228, Ref: 70230252) $16.00

Miscellaneous

Cab Foam Cowl Cover, Black - For International / Farmall tractor models 656, 706, 756, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1566, 1568, Color: Black, Kits are computer cut to assure accuracy, Includes 1 can of Spray Adhesive, For additional Spray Adhesive use Item #: 112727, (Item #: 112710) $141.00

Cab Foam Floor Mat - Year-A-Round Cab,Option 1, Black - For International / Farmall tractor models 656 (Year-A-Round Cab, Option 1), 706 (Year-A-Round Cab, Option 1), 756 (Year-A-Round Cab, Option 1), 806 (Year-A-Round Cab, Option 1), 826 (Year-A-Round Cab, Option 1), 856 (Year-A-Round Cab, Option 1), 966 (Year-A-Round Cab, Option 1), 1026 (Year-A-Round Cab, Option 1), 1066 (Year-A-Round Cab, Option 1), 1206 (Year-A-Round Cab, Option 1), 1256 (Year-A-Round Cab, Option 1), 1456 (Year-A-Round Cab, Option 1), 1466 (Year-A-Round Cab, Option 1), 1566 (Year-A-Round Cab, Option 1), Color: Black, 1/8" textured rubber top with a 1/2" foam bottom, 5/8" thick floor mat with inner sound barrier, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112720) $239.00

Cab Foam Kit - With Headliner, black. For tractors with 1300 series Hiniker Cab. (Item #: 112721, Ref: R1220) $287.00

No
Picture
Cab Foam Kit with Headliner, Year Around Cab, 13 Pieces, Black - For International / Farmall tractor models 656, 706, 756, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1566 (all with Year-A-Round Cab), Color: Black, Original equipment style foam, Kits are computer cut to assure accuracy, 13 Pieces, Includes adhesive spray, Cab Foam Kit with Year Around QT1 Cab, with Headli use Item #: 112719, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112718) $352.00

No
Picture
Control Quadrant, Used - For International tractor models 706, 756, 806, 826, 856, 1206, 1256, 1456, 2706, 2756, 2806, 2826, 2856, 21206, 21256, 21456, Replaces International OEM nos 399384R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443010) $73.01

No
Picture
Detent Roller - For International / Farmall tractor models 706 (1963-1967 Hi-LoTransmission), 756 (1968-1971), 766 (s/n17047), 806 (1963-1967 Hi-LoTransmission), 856 (1968-1971), 966 (s/n 32222-earlier), 1026 (1968-1971), 1066 (s/n 57646-earlier), 1206 (1963-1967 Hi-LoTransmission), 1256 (1968-1971), 1456 (1968-1971), 1466 (s/n 30000-earlier), 1468 (s/n 1305-earlier), 1566 (s/n 1305-earlier), 1568 (s/n 7994-earlier), Replaces International OEM number 380115R2, 3800115R2, 380115, 380115K, 380115R1, (Item #: 173862) $5.20

No
Picture
Draft Control Cylinder - For International / Farmall tractor models 706 (Farmall), 756 (Farmall), 766, 786, 806 (Farmall), 826 (Farmall), 856 (Farmall), 966, 986, 1026 (Farmall), 1066, 1086 (Farmall), 1086, 1206 (Farmall), 1256 (Farmall), 1456 (Farmall), 1466 (Farmall), 1466, 1468 (Farmall), 1468, 1486 (Farmall), 1486, 1566 (Farmall), 1566, 1568 (Farmall), 1568, 1586 (Farmall), 1586, 3088, 3288, 3688, Compatible with International Engine (s) C263, C291, C301, D282, D301, D310, D358, D360, D361, DT361, DT407, D414, DT414, D436, DT436, Replaces International OEM number 830451, (Item #: 190742) $268.59

Draft Quadrant Support, Used - For International tractor models 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM nos 382792R11, Replaces Casting nos 382792R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436660) $55.01

Hitch Pump O-Ring - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1568, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21206, 21256, 21456, Replaces International OEM number 386867R1, 238-6122, (Item #: 164019) $3.90

Hydraulic Pump Cover, Used - For International tractor models 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM nos 387348R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433086) $176.01

Hydraulic Pump Drive Gear, Used - For International tractor models 706, 756 (s/n Farmall 17635-earlier, International 8424-earlier), 856 (s/n Farmall 27286-earlier, International 9492-earlier), 1206, 1256, 2706, 2756 (s/n Farmall 17635-earlier, International 8424-earlier), 2806, 2856 (s/n Farmall 27286-earlier, International 9492-earlier), 4100, 21206, 21256, Replaces International OEM number 382332R1, Teeth; 19, Teeth Pitch: 20 degrees, For a new version of this item use Item #: 173027, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430256) $55.01

No
Picture
Hydraulic Pump Lock Nut - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, 21206, 21256, 21456, Replaces International OEM number 18536R1, (Item #: 176725) $4.80

Hydraulic Pump Mounting Gasket - For International / Farmall tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, 21206, 21256, 21456, Replaces International OEM number 382244R5, (Item #: 156515) $7.10

No
Picture
Hydraulic Pump O-Ring - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026, 21206, 21256, 21456, Outside Diameter: 1.125", (Item #: 176733) $2.00

Hydraulic Valve, Remanufactured, 383267R91 - For International / Farmall tractor models Hydro 100, 606, 656, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21256, 21456, Replaces International OEM number 383267R91, 383267R92, 383267R93, 383267R94, 529910R91, 529910R92, 529910R93, 529912R91, 529912R92, Open Both Sides, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 206999) $910.01

Hydraulic Valve, Remanufactured, 529911R91 - For International / Farmall tractor models Hydro 100, 606, 656, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21256, 21456, Replaces International OEM number 529911R91, 529911R92, 529911R93, Closed On One Side, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 207000) $1043.01

MCV Relief Valve - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2856, 3088, 3288, 3488, 3688, 4100, 4156, 4166, 4186, 5088, 5288, 5488, 21206, 21256, 21456, Replaces International OEM number 384443R92, 384443R91, (Item #: 154335) $137.00

O-Ring, Hydraulic Power Steering - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 460, 544, 560, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2544, 2706, 2826, 2856, 21026, 21206, 21256, Compatible with International Harvester (s) 616, 622, Replaces International OEM number 254688R1, 14472780, (Item #: 153567) $0.90

Park Pawl, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788, 21026, 21206, 21256, 21456, Replaces International OEM number 139141C1, 384094R2, For a new version of this item use Item #: 113420, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 413420) $100.01

Selective Shift Handle, Used - For International tractor models 706, 806, 1206, 2706, 2806, 21206, Replaces International OEM nos 382502R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435044) $46.01

No
Picture
Selector Spool Nut with Lip Seal - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 21256, 21456, Stops oil leaks from the MCV selector spool shaft, Lip type oil seal, (Item #: 176777) $52.00

No
Picture
Shift Cover - Outer, Used - For International tractor models 706, 806, 1206, 2706, 2806, 21206, Replaces International OEM nos 383103R2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438416) $68.01

No
Picture
Speed Transmission Control Arm Kit, Used - For International tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 382565R21, 380115R2, 383997R1, Includes control arm, roller and spring, For a new version of this item use Item #: 113499, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435622) $22.26

Torque Amplifier Carrier, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, Replaces International OEM nos 380235R11, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435057) $176.01

No
Picture
Torque Amplifier Pressure Isolator - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 21256, 21456, Used to isolate torque amplifier pressures between the torque amplifier circuit and the MCV circuit, Installation: (1) Remove selector spool nut and spool, (2) install isolating rod (threaded end up) and nut, Diagnostic: With isolator installed start tractor and read lube pressure. (1) Lube pressure comes up to normal operating pressure (a leak in the torque is robbing lube oil), (2) Problem with the lube oil still exists (problem is in lube circuit or MCV or TA), (Item #: 176779) $55.00

Turnbuckle - Park lock linkage, turnbuckle. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1256, 1456, 1456, 1566, 1568. Also industrial versions of above. (Item #: 111213, Ref: 390856R1) $31.00

Oil System

Oil Filter - Oil filter element, cartridge type with gasket. For gas engines: C221, C263, C291, C301. For diesel engines: D166, D188, D236, D282, D and DT 361, D and DT407. For 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 330, 340, 460, 504, 560, 606, 656, 660, 706, 756, 806, 815, 826, 856, 915. Also replaces 279994R91. (Item #: 111127, Ref: 323827R91) $12.70

No
Picture
Oil Filter - This spin on filter replaces filter numbers 1329020C1, 1329020C2, 3059246R91, 3059246R92, 3132737R91, 3132737R93, 397868R1, 398080R2, 427207C2, 427207C3, 528250R1. Measures 7-1/8 inch Length 3-11/16 inch O.D. 1-1/2 quart capacity 1 inch x 12 inch threads Filter can replace shorter (5.370 inch tall) filter for more capacity, where filter height is not an issue. For models 1046, 1055, 1246, 1255, 1468, 1568, 288, 3088, 3210, 3230, 3288, 353, 383, 385, 395, 4220, 423, 4230, 433, 440, 453, 474, 533, 540, 554, 564, 584, 595, 624, 644, [ 706, 756 ( (both with D310 German diesel)) ], 733, 740, 784, 795, 844, 884, 885, 886, 895, 946, 955, 956, 995. Verify part number and measurements. (Item #: 111055, Ref: 398080R2) $16.80

Oil Filter Spin On - Oil filter element, spin-on type. Approc, diameter 5.37 inch height, 3.68 inch outside diameter. For gas engines: C157, C175, C200, C291. For diesel engines: D179, D209, D236, D239, D246, D310, D358. For 2544, 2706, 2756, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 826, 886, HYDRO 70, HYDRO 84, HYDRO 86. (Item #: 124840, Ref: 3136046R93) $9.80

Oil Inlet Tube, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 21206, 21256, 21456, Replaces International OEM nos 382353R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 444173) $12.01

Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Order EBU6734A if washer is needed. Replaces: 688067C1, 359875R1. (Item #: 126591, Ref: C5NE6730B) $8.10

Oil Pan Drain Plug Washer - This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.70

Oil Pump - International D239, D310, D358 Diesel Oil Pump (Item #: 179998, Ref: 3136434R91) $367.00

Oil Pump - For International / Farmall tractor models 460, 504, 560, 606, 660, 706, 2504, 2606, 2706, Compatible with International Combine (s) 303, Compatible with International Harvester (s) 414, 420, Compatible with International Engine (s) C221 (LP and Gas), C263 (LP and Gas), C301 (LP and Gas), D188, D236, D282, D301, Replaces International OEM number 230421R91, 211388R91, 332435R91, 69605R91, 69604R91, (Item #: 128632) $342.70

Oil Pump Assembly - This complete oil pump assembly comes as picture and is for tractor models 606, 2606, 560 engine serial number 32243 and up, 656, 660 engine serial number 32243 and up, 706, 2656, 2706, Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706, 2756, 806, 826, 856, 2806, 2826, 2856, 3309, 340, 560 engine serial number 42218 and up, 660 engine serial number 42218 and up, 706 engine serial number 51721 and below, 2706 engine serial number 51721 and below. FOR THE FOLLOWING ENGINES ONLY: C221, C263, C282, C291, C301, UB220, UB240 gas and LP engines and BD220, BD240, D166, D188, D236, D282, D301 diesel engines. Does not include pick-up screen. Replaces 230421R91, 308366R91, 379138R1, 379138R91. (Item #: 121773, Ref: 379138R91) $279.00

Oil Pump, Used - For International tractor models Hydro 86, 544, 664, 686, 706, 756, 786, 826, 886, 2544, 2826, Compatible with International Engine(s) D239, D310, D358, Replaces International OEM nos 3055962R97, 3136434R91, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 433305) $225.01

Spin-On Oil Filter Adapter Kit - This Spin-On Oil Filter Adapter Kit Fits Gas, LP Combines: 101, 127, 141, 151, 181, 205, 303, 315, 403, 453, 503, 615, 715. Fits Gas and LP Tractors: 460, 560, 606, 656, 660, 706, 756, 806, 826, 856; Replaces: Quad ring: 304854R1, Adapter: 397866R1, Stud: 397867R1, Kit: 538837R91, Threaded bushing: 538969R1 (Item #: 167272, Ref: 397866R1KIT) $127.00

PTO / Driveline

Anti Creep Brake Piston - This Anti Creep Piston is used in multiple International models. Three are used per tractor. Sold individually. (Item #: 113402, Ref: 381464R22) $19.70

Gear, IPTO Driven - This Gear is used on some: 21026, 2706, 2756, 2806, 2826, 2856, HYDRO 100, HYDRO 186, 1026, 1066, 1086, 3088, 3288, 3388, 3488, 3688, 5088, 5288, 5488, 6388, 706, 7110, 7120, 756, 766, 786, 806, 826, 856, 886, 966, 986 (Item #: 118606, Ref: 381506R1) $266.00

Gear, PTO Idler - This PTO Idler Gear is used on 21026, 2706, 2756, 2806, 2826, 2856, HYDRO 100, HYDRO 186, 1026, 1066, 1086, 3088, 3288, 3388, 3488, 3688, 5088, 5288, 5488, 6388, 706, 7110, 7120, 756, 766, 786, 806, 826, 856, 886, 966, 986. (Item #: 115441, Ref: 381509R1) $157.00

Independant PTO Bearing Cage - For tractor models (Hydro 100, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 21206, 21256, 21456 all with torque amplifier). (Item #: 123110, Ref: 380101R2) $123.00

Independent PTO Idler Gear Bearing - This Needle Bearing is used on IPTO systems on 21026, 2706, 2756, 2806, 2826, 2856, HYDRO 100, HYDRO 186, MX80C, MX90C, 1026, 1066, 1086, 3088, 3288, 3388, 3488, 3688, 5088, 5288, 5488, 6388, 706, 7110, 7120, 7210, 7230, 756, 766, 786, 806, 826, 856, 886, 966, 986. Replaces K620047, F9706, C10300, 287057R91, 128876A1, 12-1676, 531437R91, 285057R91, T15025 (Item #: 116993, Ref: 833083M1) $23.26

Independent PTO Idler Shaft - This Independent Idler Shaft is used on 21026, 2706, 2756, 2806, 2826, 2856, HYDRO 100, HYDRO 186, 1026, 1066, 1086, 3088, 3288, 3388, 3488, 3688, 5088, 5288, 5488, 6388, 706, 7110, 7120, 756, 766, 786, 806, 826, 856, 886, 966, 986. Replaces 381507R1 (Item #: 118605, Ref: 381507R1) $37.40

Internal PTO Shaft - 1 3/4 inch diameter, 17 spline, 28 teeth, 20 degree tooth angle. Check degree of angle on gear teeth BEFORE ordering. For tractor models 1206, (2756 farmall serial number up to 17635 and IH serial number up to 8424), (2856 farmall serial number up to 27286 and IH up to serial number 9492), 4100, 4156, 4166, 4186, 706, Farmall 756 (to serial number 17635), International 756 (to serial number 8424), 806, Farmall 856 (to serial number 27826) (International 856 up to serial number 9492), 1400. (Item #: 108817, Ref: 380261R1) $86.00

IPTO Bushing - This Bushing Measures 38.18mm inside diameter x 44.58mm outside diameter x 12.7mm wide. It us used on tractors without traction assist. Replaces part numbers 384185R1, 153393, 384185 (Item #: 153393, Ref: 384185R1) $13.70

IPTO Drive Shaft, Used - For International tractor models Hydro 100, 706, 766 (s/n 7661-earlier), 786, 826, 856, 886, 966 (s/n 14863-earlier), 986, 1066 (s/n 18508-earlier), 1086, 1206, 1456, 1466 (s/n 12776-earlier), 1468 (s/n 7649-earlier), 1486, 2706, 2826, 2856, 3088, 3288, 3388, 3688, 6388, 21206, 21456, Replaces International OEM number 65357C1, 380103R21, Splines: 6 and 12, Bolt hole on each end: 3/8", For a new version of this item use Item #: 173492, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434305) $107.01

No
Picture
IPTO Valve Housing, Remanufactured, 381462R21 - For International / Farmall tractor models Hydro 100, Hydro 186 (s/n 12000-earlier), 706, 756, 766, 806, 826, 856, 886 (s/n 17000-earlier), 956 (s/n 24000-earlier), 966, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486 (s/n 26000-earlier), 2706, 2756, 2806, 2826, 2856, 3388 (s/n 10385-earlier), 21026, 21206, 21256, 21456, Replaces International OEM number 381462R21, All Models with Spring Loaded Anti-Creep Brakes, (Item #: 210544) $430.01

No
Picture
PTO Arm, Used - For International tractor models 706, 806, 1206, 2706, 2806, 21206, Replaces International OEM nos 385517R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438538) $41.01

No
Picture
PTO Assembly - Dual Speed, Remanufactured, 381512R91 - For International / Farmall tractor models Hydro 100, Hydro 186 (s/n 11999-earlier), 706, 756, 806, 826, 856, 886 (s/n 16999-earlier), 966, 986 (s/n 23999-earlier), 1066, 1086 (s/n 47999-earlier), 1206, 1256, 1456, 1466, 1486 (s/n 25999-earleir), 3388 (s/n 10384-earlier), Replaces International OEM number 381512R91, Uses 12 spline input coupler, (Item #: 203593) $1675.01

PTO Control Boot - For tractor models 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788, 4366, 4386, 4568, 4586, 4786, Hydro 70, Hydro 86, Hydro 100. (Item #: 118607, Ref: 393071R2) $5.90

PTO Coupler, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, Super M, Super MTA, 300, 300U, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486 (s/n 25999-earlier), 2504, 2544, 2606, 2656, 3388 (s/n 10384-earlier), Replaces International OEM nos 360168R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430248) $49.51

PTO Drive Gear, Used - For International tractor models 706, 806, 2706, 2806, Replaces International OEM nos 380262R1, Teeth: 58, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498373) $117.01

PTO Driven Gear Bearing - This needle bearing measures 1.25 inches inside diameter x 1.63 inches outside diameter x 1.25 inches wide. It replaces OEM numbers 576539R91, JD9900 (Item #: 116970, Ref: 576539R1) $48.80

PTO Driven Gear, Used - For International tractor models 706 (Farmall s/n 26385-later, International s/n 4232-later), 756 (Farmall s/n 17635-earlier, International s/n 8424-earlier), 806 (Farmall s/n 19710-later, International s/n 4954-later), 856 (Farmall s/n 27286-earlier, International s/n 9492-earlier), 1206, 1256, 2706 (Farmall s/n 26385-later, Intenational s/n 4232-later), 2756 (Farmall s/n 17635-earlier, International s/n 8424-earlier), 2806 (Farmall s/n 19710-later, International s/n 4954-later), 2806 (Farmall s/n 27286-earlier, International s/n 9492-earlier), 4100, 21206, 21256, Replaces International OEM nos 391828R1, Teeth: 58, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430761) $210.01

PTO Drive Shaft - 51 and 12 teeth. For tractor models 1026, 1066, (1086 serial number up to 47999), 1206, 1256, 1456, (1486 serial number up to 25999), 21026, 21206, 21256, 21456, 2544, 2656, 2706, 2756, 2826, 2856, (3388 serial number up to 10384), 544, 656, 664, 666, 686, 706, 756, 766, 826, 856, (886 serial number up to 16999), 966, (986 serial number up to 23999), Hydro 100, (Hydro 186 serial number up to 11999), Hydro 70, Hydro 86. (Item #: 166964, Ref: 389529R1) $563.00

PTO Drive Shaft Bearing Cage - For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1486, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 4100, 4156, 4166, 4186, 706, 756, 766, 786, 806, 826, 856, 966, 986, Hydro 100. (Item #: 172679, Ref: 384079R2) $202.00

PTO Drive Shaft Bearing Cage, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1206, 1256, 1456, 1466, 1468, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 384079R2, For a new version of this item use Item #: 172679, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436642) $109.01

PTO Drive Shaft Bearing Retainer, Used - For International tractor models Hydro 100, 706, 756, 766 (s/n 11780-earlier), 806, 826, 856, 966 (s/n 17001-20613), 1066 (s/n 30176-earlier), 1206, 1256, 1456, 1466 (s/n 18131-earlier), 1468 (s/n 9546-earlier), 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166 (s/n 11099-earlier), 4186 (s/n 11099-earlier), 21206, 21256, 21456, Replaces International OEM nos 380107R1, Use with Independent Gears: 528677R1, 67594C1 and 68512C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435045) $36.01

PTO Extension Shaft, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486 (s/n 25999-earlier), 3388 (s/n 10384-earlier), Replaces International OEM nos 381513R11, Splines: 12 and 12, Length: 19", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497169) $50.01

PTO Housing Cover - This PTO housing cover is used on Dual Speed PTO Tractors. It is used with 120985C1 1000 RPM Shafts and 393111R2 540 RPM PTO Shafts. Seal and gasket kit is available as part number 77720C94 or 77721C91 (also includes brake components. Replaces 64785C91 (Item #: 109390, Ref: 64785C92) $544.00

PTO Input Shaft, Used - For International tractor models 706, 806, 2706, 2806, Replaces International OEM nos 381495R1, Uses #5 Woodruff Key 1/8" X 5/8", ****Check Your Keyway Size Before Ordering****, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441438) $291.01

PTO Input Shaft, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3388, 21026, 21206, 21256, 21456, Replaces International OEM nos 389529R1, Spline: 12 and 51, Uses #91 Woodruff Key 1/4" X 3/4", ****Check Your Keyway Size Before Ordering****, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497525) $291.01

PTO Knob - For tractor models 544, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4366, 4386, 4568, 4586, 4786, Hydro 70, Hydro 86, Hydro 100. (Item #: 112393, Ref: 387885R1) $9.30

PTO Plate - Measures 4.070 inches inside diameter, 5.300 inches outside diameter. Replaces 381489R3, 1277392C1, 1997688C1 (Item #: 111358, Ref: 381489R3) $4.30

PTO Shaft - 1000 RPM - 17 drive splines 13.187 inches long. For the following tractors with DUAL SPEED PTO Assembly: 100, 186, 706, 756, 766, 786, 806, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 3088, 3288, 3688, 6388. (Item #: 107273, Ref: 120985C1) $230.00

PTO Shaft, 540 RPM - 13 tooth front splines, 10.815 inch long. For tractor models (706, 806, 826, Hydro 100, Hydro 186, 1026 all from 1962 with single speed PTO), (756, 766, 786, 856, 886, 966, 986, 1066, 1086 all from 1962 with single or dual speed PTO), 1206, 1468, 2706, 2806, 2826, 21206, 21026, (1256, 1456, 1466, 1486, 2756, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, 21256, 21456 all with dual speed PTO). Replaces 393111R2, 393111R1 (Item #: 107272, Ref: 393111R2) $98.00

PTO Shaft Oil Seal - This seal fits the following tractor models as a PTO shaft oil seal: 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Hydro 186, Hydro 70, and Hydro 86. Replaces part numbers: 213712, 381480R1, 381480R91, 534917R91, 634036, and 80634036. It has an inside diameter of 1.375 inches, an outside diameter of 2.000 inches, and is 0.337 inches wide. (Item #: 109957, Ref: 8N7052A) $8.80

PTO Shaft, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3688, 6388, 21026, 21206, 21256, 21456, Replaces International OEM number 393111R1, 393111R2, 10.815" Long, Dual Speed PTO, For a new version of this item use Item #: 107272, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 407272) $57.01

PTO Shield - Two Piece For 06 Series thru 86 Series with Dual Speed PTO. OEM# 1264520C1 1264503C1 (Item #: 103968, Ref: R0907) $57.00

PTO / Drivetrain

No
Picture
IPTO Seal Driver - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3688, 3788, (Item #: 176773) $69.00

Seats

Lower Back Seat Bracket Set, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, 544, 574, 606 (With Vertical Action), 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066 (With Vertical Action), 1206, 1256, 1456, 1466 (With Vertical Action), 1468 (With Vertical Action), 1566, 1568, 1586, 2656, 2706 (s/n 3000-later), 2756, 2806, 2826, 2856, 4156, 4166, 21026, 21206, 21256, 21456, Compatible with International Combine(s) 715, 815, 915, Compatible with International Hay Cutting(s) 375, Compatible with International Rake / Tedder(s) 100, Replaces International OEM number 387172R1, 387173R1, Includes 2 Brackets, For a new version of this item use Item #: 112241, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 412241) $24.76

Seat Adjustment Handle - For the following models: Hydro 100, 460, 504, 544, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186. Replaces 372738R91, 372739R91, 373656R91, and 380725R91. (Item #: 105324, Ref: 1016119M91) $28.70

Seat Assembly - Black and white vinyl on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 101273, Ref: R1139) $602.87

Seat Assembly - Black vinyl on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 178440, Ref: R1140) $924.00

Seat Assembly - Black fabric on steel. For 21206, 21256, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966. Replaces 7743, 399209R94, 399209R95 (Item #: 182099, Ref: R1141) $829.00

Seat Back - Black and White Vinyl on Steel For 404, 504, 606, 706, 806, 2404, 2504, 2606, 2706, 2806 with Fiberglass Frame (Item #: 182096, Ref: R1138) $143.00

Seat Back - Black and White Vinyl on Steel For 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066 (Item #: 109272, Ref: R0866) $177.00

Seat Back - Black and white vinyl on steel with original style pleated covering. For 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4156, 4166, Hydro 70, Hydro 86, Hydro 100. (Item #: 127287, Ref: R3662) $207.00

Seat Back - Black Vinyl on Steel For 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066. Replaces 387174R92, 387175R1 (Item #: 127286, Ref: R0869) $218.00

No
Picture
Seat Bottom - Black and White Vinyl on Steel For 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066 (Item #: 178455, Ref: R0865) $310.00

No
Picture
Seat Bottom - Black and White Vinyl on Wood For 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066 (Item #: 178468, Ref: R0986) $155.00

Seat Bracket Set - Heavy gauge powder coated steel mounting brackets specifically designed for our IH6012 replacement cushion set. This bracket set replaces part numbers 387172R1, 387173R1, 387178R1. Hardware included. (Item #: 101255, Ref: IH6013) $59.00

Seat Cushion Set - Black and white leatherette upholstery. Kit contains seat, lower and upper backrest. For tractor models 70, 86, 504, 544RC, 574, 606, 656 before serial number 14500, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456D, 1466, 1468, 1566, 1568, 2504, 2706, 2756, 4100, 4166, 4186 after serial number 19259. Bracket set is available separately as part number IH6013. Replaces 167891C1, 387174R92, 387177R92, IH6012 (Item #: 101254, Ref: IH6012) $130.00

Seat Cushion Set - Seat cushion kit, black and white. Contains seat cushion, lower backrest and upper backrest. For tractors: Hydro 70, Hydro 86, Hydro 100, 504 Deluxe, 544 row crop, 656 prior to serial number 145000, 666, 686, 706, 756, 786, 806 prior to serial number 14500, 826, 856, 966, 1026, 1066, 1206, 1256, 1456D, 1466, 1468, 1566, 1568, 2504 Deluxe, 2706, Deluxe, 2756 Deluxe, 4100, 4156, 4166, 4186 after serial number 19259. Bracket set is available separately as part number IH6013. Replaces 167891C1, 387174R92, 387177R92, IH6012 (Item #: 101254, Ref: IH6012) $130.00

No
Picture
Seat Cushion Set - 3 Piece, Vinyl, White/Black - Black & White Vinyl Steel Core. Seat 4" Cushion. Backrest 2" Cushion. Wrap around backrest 2" cushion. Vertical Action. Hardware not included. Compatible with International Tractor(s) Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156 (4WD), 4166 (4WD), 4186 (4WD) (Item #: 113002) $195.00

$Farmall 706 Seat Cushion Set - 3 Piece, Vinyl, White\Black$
Seat Cushion Set - 3 Piece, Vinyl, White/Black - Black & White Vinyl Steel Core. Seat 4" Cushion. Backrest 2" Cushion. Wrap around backrest 2" cushion. Vertical Action. Hardware not included. Compatible with International Tractor(s) Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 4100, 4156 (4WD), 4166 (4WD), 4186 (4WD) (Item #: 113002) $195.00

Seat Mounting Plate - This plate adapts adjustable base seats. For tractor models 1056, 1066, 1086, 1206, 1456, 1466, 1486, 706, 756, 766, 806, 856. (Item #: 172989, Ref: SMP200) $70.00

Seat, Shock Absorber - For tractor models 460, 504, 544, 560, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, 2504, 2544, 2706, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 414 Cotton Picker, 420 Cotton Picker. Replaces 372751R91, IHS646. (Item #: 105342, Ref: 400072) $54.00

No
Picture
Seat Upper Back - Black and White Vinyl on Steel For 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066 (Item #: 178456, Ref: R0867) $157.00

Spring Seat, Rubber - For tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1566, 460, 504, 544, 560, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1468, 1568, 4100, 4156, 4166, 4186, 656, 660, Hydro 100, Hydro 70, Hydro 86. Some of these models have a different seat (earlier version) that the left and right springs are different pin configurations and the center shaft has a collar that sticks up above the rubber..... These are not available. (Item #: 101285, Ref: 380712R1) $39.65

Sheet Metal / Body Parts

No
Picture
4th Step - For International / Farmall tractor models Hydro 86, Hydro 100, 706, 756, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 1586, 3388, 3588, 3788, Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide, 6" deep, Comes primered (color may vary). Prior to painting check fitment, 4th Step Works with Step Kit use Item #: 110951, (Item #: 114430) $89.00

4th Step - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1566, 1568, Easy to install with no holes to drill and hardware is included, Step: 10" wide, 6" deep, Comes primered (color may vary). Prior to painting check fitment, (Item #: 114433) $88.00

Alternator Shield - This Alternator Shield fits 1026, 1256, 1456, 856, 544, 756, 826, 1206, 656, 706, 806, 2656, 2706, 2756, when using an alternator. Primered. Verify part number. Replaces 396360R1, 396360R2 (Item #: 126393, Ref: 396360R2) $59.00

Battery Cover - Battery cover, measures 20 3/4 inches long, 4 3/4 inches wide, and 1 3/4 inches deep. Hold down bolts available as part number 198185A1, requires 2, sold separately. For tractor models 706, 756, 806, 856, 966, 1066, 1206, 1256, 1456, 1466, 1566. For 1066, 1206, 1256, 1456, 1466, 1566, 706, 756, 806, 856, 966. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104018, Ref: 71717C91) $27.00

Battery Tray - Left Hand For 706, 756, 806, 856, 966, 1066, 1206, 1256, 1456, 1466, 1566. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104017, Ref: R4200) $65.00

No
Picture
Battery Tray - Right Hand For 706, 756, 806, 856, 966, 1066, 1206, 1256, 1456, 1466, 1566. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104016, Ref: R4201) $61.00

Battery Tray, LH - Left side battery tray accommodates a heavy duty battery (Group number 4EH), 5 inches wide battery. For tractor models 706, 756, 766, 806, 826 (GEAR DRIVE), 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568. Replaces 399048R1. (Item #: 104017, Ref: 399046R1) $65.00

Battery Tray, RH - Right side battery tray accommodates a heavy duty battery (Group number 4EH), 5 inch wide battery. For tractor models 706, 756, 766, 806, 826 (GEAR DRIVE), 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568. Replaces 399055R1. (Item #: 104016, Ref: 399047R1) $61.00

Fender Bracket - Left Hand - For International / Farmall tractor models 504, 544, 656, 706, 756, 826, 856, 2504, 2544, 2656, 2706, 2756, 2826, 2856, Replaces International OEM number 399339R1, Fits left-hand side, Tires 34"-larger, Comes primered (color may vary). Prior to painting check fitment, For U-Bolt use Item #: 103853, Additional Handling and Oversize Fees Apply To This Item, (Item #: 103852) $102.00

No
Picture
Fender Bracket - Right Hand - For International / Farmall tractor models 504, 544, 656, 706, 756, 826, 856, 2504, 2544, 2656, 2706, 2756, 2826, 2856, Replaces International OEM number 399340R1, Fits right-hand side, Tires 34"-larger, Comes primered (color may vary). Prior to painting check fitment, For U-Bolt use Item #: 103852, Additional Handling and Oversize Fees Apply To This Item, (Item #: 103853) $111.00

No
Picture
Fender Grip - Grommet, fender hand grip. Tractors: 544, 565, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1066, 1026, 1206, 1256, 1456, 1466, 1468, 1566, 1568 and many more applications. Fits fenders 399329R2, 399328R2, 533187R1, 533188R1. (Item #: 103959, Ref: 388940R1) $8.80

Fender Handle Grommet - Outside diameter 5.750 inch x 2.750 inch, inside diameter 4.500 inch x 1.500 inch. For tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 574 series A, 656, 66, 666, 674, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2500 series A, 2504, 2544, 2656, 2706, 2756, 2826, 2856, 21026, 21206, 21256. Replaces 235700A1, 388940R1.235700A2 (Item #: 103959, Ref: R20759) $8.80

Fender Mounting Bracket, Left - For 1026, 1206, 1256, 1456, 706, 756, 806, 826, 856. Fender Mounting Bracket, Left Hand. Fits with fender E399328R2. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces 391992R91, 399335R1 (Item #: 108970, Ref: 399335R1) $137.00

Fender Mounting Bracket, Right - For tractor models 1026, 1206, 1256, 1456, 706, 756, 806, 826, 856. Fender Mounting Bracket, Right Hand. Fits with fender E399329R2. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 108971, Ref: 399336R1) $140.00

Fender Mounting U-Bolt - U-Bolt has 3/4 inch diameter. Two required per tractor, sold individually. Includes heavy flat washers, lock washers, nuts. Fits 533187R1 and 533188R1 fenders. Replaces 388944R1, 388944R2, 584253R1 (flat washer), 103326 (lock washer), 220081 (nuts). For tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 706, 756, 766, 806, 826, 856 and 966. (Item #: 110701, Ref: 388944R1) $24.50

Fender Set, Dual Light Holes - Right Hand and Left Hand - For International / Farmall tractor models 544, 656, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, Replaces International OEM number 399329R2, 399328R2, 393695R92, Two light holes, Left Hand and Right Hand Set, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, For Fender, Dual Light Holes - Left Hand use Item #: 103990, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 160453) $500.00

Fender Skin (LH) - For tractor models 1026, 1206, 1256, 1456, 544, 656, 706, 756, 806, 826, 856. This fender skin is used with 399335R1 bracket.Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103991, Ref: 399328R2) $276.00

Fender Skin (RH) - For tractor models 1026, 1206, 1256, 1456, 544, 656, 706, 756, 806, 826, 856. This fender skin is used with 399336R1 bracket.Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103990, Ref: 399329R2) $280.00

Front Hang-On Weight Bracket - This is a 10 hole bracket. There is 16 inch from center-to-center bolt holes. The overall length is 23-3/8 inch. For utility applications, must have existing 66253C1 cast bumper weight to bolt this to. Hydro 70, Hydro 84, Hydro 86, 1026, 1206, 1256, 1456, 21026, 21206, 21256, 21456, 2424, 2444, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 385, 404, 424, 444, 460, 504, 544, 560, 656, 660, 664, 666, 686, 706, 756, 806, 826, 856, Following 2 wheel drive only: 784, 884, Following when equipped with 66253C1 cast bumper weight: 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500, 2500A, 2500B, 2505B, 2510B, 2514B, 454, 464, 484, 574, 584, 674, 684, will also fit the following models when using (2) 536041R1 spacers: 1066, 1466, 1468, 1566, 1568, 766, 966, Hydro 100. Replaces: 383389R11, 383389R21 (Item #: 152230, Ref: 383389R11) $225.00

Front Hood Access Cover - LH, RH, Used - For International tractor models 544, 656, 664, 706, 806, 2544, 2656, 2706, 2806, Replaces International OEM nos 378627R1, Fits Right Hand or Left Hand Side, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498359) $35.01

Grab Handle - Left - For 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, all with Gear Drive. Grab Handle - Left Hand. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104030, Ref: 397890R2) $37.50

Grab Handle - Right - For 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, all with Gear Drive. Grab Handle - Right Hand. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104029, Ref: 399306R2) $33.80

No
Picture
Grab Handle - Right Hand - For International / Farmall tractor models Hydro 100, 706, 806, 826 (with Hydro drive), 966 (with Hydro drive), 1026 (with Hydro drive), 1066 (with Hydro drive), 1206, 2706, 2806, 21026 (with Hydro drive), 21206, Replaces International OEM number 394820R2, 394820R1, Fits Right Hand Side, For Left Hand Side use Item #: 121834, (Item #: 121835) $45.00

No
Picture
Handrail - Left Hand - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1566, 1568, Easy to install with no holes to drill and hardware is included, Fits Left Hand Side, Comes primered (color may vary). Prior to painting check fitment, For Step Unit - Left Hand use Item #: 114440, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114429) $71.00

Handrail - Right Hand - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 504, 544, 656, 666, 686, 706, 756, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1566, 1568, Easy to install with no holes to drill and hardware is included, Will only fit on tractors with no cabs., Comes primered (color may vary). Prior to painting check fitment, For Step Unit use Item #: 114429, (Item #: 114432) $77.15

Hood Bolt - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, Replaces International OEM number 389427R91, Size: 5/16"-18NC x 3/4", (Item #: 126532) $6.70

No
Picture
Lower Steering Support Panel, LH, Used - For International tractor models 706, 806, 1206, 2706, 2806, 21206, Replaces International OEM number 389907R1, Left Hand, For Right Hand use Item #: 434495, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435907) $71.01

Rear Hood Side Panel, LH, Used - For International tractor models 544, 656, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM number 378638R1, Left Hand, For Tractors with Side Headlights, For Right Hand use Item #: 435055, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435056) $49.01

Rear Hood Side Panel, LH, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM nos 378670R1, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434915) $55.01

No
Picture
Rear Hood Side Panel, RH, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 666, 686, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM nos 378671R1, Right Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434916) $55.01

Rear Hood Side Panel, RH, Used - For International tractor models 544, 656, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Replaces International OEM number 378639R1, Right Hand, For Tractors with Side Headlights, For Left Hand use Item #: 435056, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435055) $49.01

Seat Support Rear Cover - 5.50 inches tall x 7.43 inches wide. Made in the USA. For tractor models 706, 806, 1206. (Item #: 126673, Ref: 383175R1) $37.58

No
Picture
Step Unit - This three Step Unit for Hiniker Cab on Models 1066, 1206, 1256, 1456, 1466, 1566, 1568, 706, 756, 806, 826, 856, 966. (Item #: R6959) $443.42

No
Picture
Step Unit - 3 Step Unit for tractors WITH Cabs (EXCEPT Hiniker Cab) on Models 1066, 1206, 1256, 1456, 1466, 1566, 1568, 706, 756, 806, 826, 856, 966. (Item #: 178347, Ref: R6960) $849.30

Step Unit - For International / Farmall tractor models 706, 756, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1566, 1568 (all using Hiniker Cabs), Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide, 6" deep, mounts at 30° angle to tractor with 9" between steps, Will not fit IH 826 German-made models., Only fits with Hiniker cab., Comes primered (color may vary). Prior to painting check fitment, Handrail-Left Hand use Item #: 114430, (Item #: 114428) $424.00

No
Picture
Step Unit - For International / Farmall tractor models Hydro 100 (With Cab), 706 (With Cab), 756 (With Cab), 806 (With Cab), 826 (With Cab), 856 (With Cab), 966 (With Cab), 1026 (With Cab), 1066 (With Cab), 1206 (With Cab), 1256 (With Cab), 1456 (With Cab), 1466 (With Cab), 1566 (With Cab), 1568 (With Cab), Easy to install with no holes to drill and hardware is included, Step: 14-1/2" wide, 6" deep, mounts at 30° angle to tractor with 9" between steps, Comes primered (color may vary). Prior to painting check fitment, Handrail- Left Hand use Item #: 114430, Additional Handling and Oversize Fees Apply To This Item, (Item #: 114434) $493.00

No
Picture
Step Unit - Left Hand - For International / Farmall tractor models Hydro 100, 706, 756, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1566, 1568, Easy to install with no holes to drill and hardware is included, Step: 10" wide, 6" deep, mounts at 30° angle to tractor with 9" between steps, Open Station, Fits Left Hand Side, Comes primered (color may vary). Prior to painting check fitment, Handrail shown is sold separately, 4TH Step use Item #: 114429, Additional Handling and Oversize Fees Apply To This Item, (Item #: 109862) $340.00

Step Unit - Right Hand - For International / Farmall tractor models Hydro 100 (Open Station), 706 (Open Station), 756 (Open Station), 806 (Open Station), 826 (Open Station), 856 (Open Station), 966 (Open Station), 1026 (Open Station), 1066 (Open Station), 1206 (Open Station), 1256 (Open Station), 1456 (Open Station), 1466 (Open Station), 1566 (Open Station), 1568 (Open Station), Easy to install with no holes to drill and hardware is included, Step: 10" wide, 6" deep, mounts at 30° angle to tractor with 9" between steps, Fits Right Hand Side, Comes primered (color may vary). Prior to painting check fitment, Handrail shown sold separately, 4TH Step use Item #: 114432, (Item #: 114431) $444.00

Steering

Axle - Heavy duty main axle assembly includes bushings. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. Additonal $45 shipping due to weight. (Item #: 120010, Ref: 7453) $910.00

Axle Center Tube - For all models listed with factory IH wide front with tie rods behind center tube: H, Hydro 70, M, MD, MTA, Super H, Super M, Super MD, 1026, 1206, 1256, 300, 350, 400, 450, 460, 544, 560, 656, 666, 706, 756, 806, 826, 856 Axle Center Tube with bushings (48841D) is 42 1/2 inches long and 4 1/2 inches in diameter. Replaces: 358976R31, 383926R21, Bushing: 48841D (Item #: 109489, Ref: 358976R31) $450.00

Axle Clamp, Front, Used - For International tractor models H, HV, Hydro 70, Hydro 86, Hydro 100, Hydro 186, M, MD, MTA, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 2544, 2706, 2806, 2826, 2856, 21026, 21206, 21256, Replaces International OEM nos 350556R1, Front Axle Clamp, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434540) $31.01

No
Picture
Axle Extension Tube - Standard duty, 11-5/8". For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 108809, Ref: 3036) $294.00

No
Picture
Axle Extension Tube - schwartz part (Item #: 110830, Ref: 3037) $381.00

Axle Extension Tube, Heavy Duty - For Schwartz aftermarket front end. 11-5/8 inch vertical shaft tube. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 111582, Ref: 7465) $351.00

Axle Extension Tube, Heavy Duty - For Schwartz aftermarket front end. 9-5/8 inch vertical shaft tube. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 172645, Ref: 7470) $403.00

Axle Pivot Ball - Thread is 3/4 inch diameter, 16 thread. Ball is 1.75 inches in diameter. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1586, 544, 560, 656, 666, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 70, (66 series with block type power steering cylinder end (late with axle pivot ball, NOT pin), (86, 88 series with axle pivot ball NOT pin). (Item #: 108885, Ref: 65320C3) $21.60

Axle Pivot Pin Bushing - This Bushing Measures 1.245 inches inside diameter, 1.375 inches outside diameter, 1.486 inches long. Sold individually. This bushing has a superior dimpled brass inner design to retain grease. No need for an external grease hole. Note: Must be honed or reamed to size when installed. Used on the following as a WIDE FRONT axle pivot pin bushing for factory adjustable wide front axle and tie rods behind the axle: 1026, 1256, 400, 450, 660, 666, 300, 350, 460, 544, 560, 656, 706, 756, 806, 826, 856, H, Hydro 70, M, MD, MTA, Super H, Super M, Super MD, Super MDTA, Super MTA, W400, W450. Replaces 48841D (Item #: 109669, Ref: 48841D) $13.70

Bolster Pivot Pin - 1 1/4 inch diameter, 8 1/2 inches long. If you need a 1 1/2 inch Diameter Pin, order 379941R1. For tractor models H, Hydro 70, M, MD, MTA, Super H, Super M, 1206, 1256, 400, 450, 460, 544, 560, 656, 666, 686, 706, 756, 806, 826, 856. Replaces 358978R1, 358978R2 (Item #: 109487, Ref: 358978R2) $27.60

Front Axle - For International / Farmall tractor models 560, 656 (s/n 41992-later), 706, 756, 806, 856, Less Hubs, Catagory 2 Quick Hitch, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 109921) $2759.01

Front Axle Clamp Pin - For International / Farmall tractor models H, HV, Hydro 70, Hydro 100, Hydro 186, M, MD, Super H, Super M, 300, 350, 400 (FARMALL), 450, 460, 544, 560, 656, 660, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, Compatible with International Construction and industrial models 21206, 21256, Replaces Case IH OEM number 350557R1, 0.739" Dia., 6.616" Long, 1.125" Head, For applications with steel center axle tube, but depending on the model it can be used on standard and high center front axle., With adjustable wide front axle, (Item #: 158235) $11.90

No
Picture
Front Saddle Assembly - Fits Schwartz front end ONLY. For tractor models 300, 350, 400, 450, 460, 544, 560, 656, 706, 756, 806, 856, H, M, MTA, Super H, Super M. (Item #: 172611, Ref: 7443) $311.00

Jam Nut - For the following tractors: Hydro 100, Hydro 185, Hydro 70, 1026, 1066, 1086, 1206, 1256, 1466, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 460, 544, 560, 660, 666, 686, 706, 756, 766, 786, 806, 826, 856, 966, 986, 2WD STD AXLE: 5088, 5288, 5488. Replaces 374062R1 (Item #: 105123, Ref: 192928M1) $8.40

Knee Extension - With bushings 3 7/8 inch diameter. For 460, 544, 560, 660, 666, 686, 706, 806, 1206, 1256, Hydro 70. (Item #: 110386, Ref: R2953) $250.00

Pivot Bolster - For tractor models 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 1026, 1206, 1256, Hydro 70. Pivot Bolster. (0011R) (Item #: 109484, Ref: 383909R4) $248.00

Pivot Bolster Pin - 1 1/2 inch diameter, 8 1/2 inches long. For 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 1026, 1206, 1256, Hydro 70. Pivot Bolster Pin. (2961R) (Item #: 173188, Ref: 379941R1) $60.00

No
Picture
Pivot Pin 4-3/16 - For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 110958, Ref: 1394) $35.00

No
Picture
Pivot Pin, 6-11/16 - For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super M, Super H. (Item #: 110959, Ref: 1393) $16.00

Pivot Pin Jam Nut - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650, (Item #: 108889) $8.30

Pivot Pin Retaining Pin - For International / Farmall tractor models Hydro 70, 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 856, 1206, 1256, Replaces International OEM number 251105R1, Dimensions: 3/8" x 4 7/8", (Item #: 170357) $4.30

Rear Housing Overhaul Gasket Set - For International / Farmall tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388 (s/n 10490-earlier, Does not include Pump drive Housing Gasket), 3588 (s/n 130114-earlier, Does not include Pump Drive Housing Gasket), 3788 (s/n 9786-earlier, Does not include Pump Drive Housing Gasket), Replaces International OEM number 386683R96, (Item #: 168749) $195.00

Rear Support Bushing - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 756, 806, 856, Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650, 1850, Replaces OEM number 60305, (Item #: 110729) $6.60

Replacement Plug - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, Replaces International OEM number 1389, (Item #: 108806) $7.06

No
Picture
Replacement Pump Spring and Vane - For International / Farmall tractor models Hydro 70 (1/74-12/77), Hydro 86 (1/74-12/77), Hydro 100, Hydro 186 (1/72-12/78), 544 (Farmall, 1/66-12/73), 544 (1/66-12/73), 656 (Farmall, 1/66-12/73), 656 (1/66-12/73), 666 (1/72-12/72), 686 (1/69-12/71), 706 (1/63-12/67), 706 (Farmall, 1/63-12/67), 756 (1/67-12/71), 756 (Farmall, 1/67-12/71), 766 (1/72-12/78), 786 (Diesel, 1/74-12/80), 826 (1/69-12/71), 826 (Farmall, 1/69-12/71), 856 (1/86-12/83), 886 (Diesel, 1/74-12/80), 966 (Diesel, 1/71-12/71), 986 (Diesel, 1/74-12/79), 1026 (Diesel), 1066 (Diesel, 1/74-12/78), 1086 (Diesel, 1/74-12/79), 1466 (Diesel, 1/72-12/77), 1468 (Diesel, 1/74-12/76), 1486 (Diesel, 1/74-12/79), 1586 (Diesel, 1/74-12/79), 2544 (Diesel), 2656 (1/63-12/71), 2706 (1/63-12/67), 2756 (1/69-12/71), 2826 (Diesel, 1/69-12/71), 2856 (Diesel), 3088 (Diesel, 1/81-12/86), 3288 (Diesel, 1/81-12/86), 3488, 3688 (Diesel, 1/81-12/86), 5088 (Diesel, 1/81-12/87), 5288 (Diesel, 1/81-12/87), 5488 (Diesel, 1/81-12/87), 21026 (Diesel), Compatible with International Hay Cutting (s) 375, Replaces International OEM number 405788R91, Spring and vane used with pumps: 382579R94 and 400187R93, (Item #: 165421) $146.00

No
Picture
Ring Gear and Pinion Kit - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3088, 3288, 3388, 3488, 3588, 3688, 6388, 6588, Replaces International OEM number 135770C2, 528684R91, 528707R93, 395828R1, Kit Includes: Ring Gear and Pinion, Lock Plate, Nut, Shim (.004"), (2) Shims (.007"), and Bearing and Retainer Assembly, For Bearing and Retainer Kit use Item #: 160584, (Item #: 177076) $2249.01

RV Pivot Arm Kit - Pivot arm kit, contains 380312R13 reverse pilot arm and 380115R2 roller. 06 Series tractor models: 706, 806, 1206, (1963 to 1967). For 1206, 706, 806. (Item #: 111423, Ref: 380312KIT) $75.00

Schwartz Heavy Duty Wide Front End with Hubs - For International / Farmall tractor models 544, 656, 706, 756, 806, 856, Converts narrow front to wide front, Heavy Duty, Not recommended for use with flotation tires, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 120001) $3438.80

Schwartz Heavy Duty Wide Front End without Hubs - For International / Farmall tractor models 560, 656, 706, 756, 806, 856, Converts narrow front to wide front, Heavy Duty, Not recommended for use with flotation tires, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 120003) $2529.01

Shaft, Cam Pivot - Cam pivot shaft. For tractor models 706, 806, 1206, (1963 to 1967). (Item #: 111209, Ref: 391018R21) $24.60

Shim Stay Rod Cap - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 21026, 21256, 21456, Replaces International OEM number 379954R1, (Item #: 111253) $4.10

Spindle - For International / Farmall tractor models 656, 706, 756, 806, 856 (with Schwartz wide front end), Compatible with International Construction and industrial models 550, Replaces manufacturer number 7461, Vertical Length: 11-3/8", Shaft Diameter: 1-3/4", Spline Diameter: 1-5/8", Seal Diameter: 2.250", Outer Bearing Diameter: 1.375", Inner Bearing Diameter: 1.781", Used In Kit No. 120003, (Item #: 108894) $361.00

Spindle - For International / Farmall tractor models 560, 706, 756, 806, 856 (all with Schwartz Wide Front Ends), Replaces International OEM number 1139-53539, Replaces manufacturer number 3274, Vertical length 11-3/8", Shaft dia. 1-5/8", Spline dia. 1-5/8", Inner brg. dia. 1.781", Outer brg. dia. 1.375", Seal dia. 2.250", (Item #: 109363) $229.00

No
Picture
Spindle - For International / Farmall tractor models 460, 544, 560, 656, 706, 806, 856, Vertical Length: 11-3/8", Shaft Diameter: 1-3/4", Spline Diameter: 1-5/8", Seal Diameter: 2", Outer Bearing Diameter: 1.374", Inner Bearing Diameter: 1.795", Used In Kit No. 119999, 120000, 120001, Additional Handling and Oversize Fees Apply To This Item, (Item #: 120007) $293.00

Spindle Bushing - Fits 1.667 inch diameter spindles replaces 376099R1. For use with A-71785HD and OEM spindle. (Item #: 102175, Ref: 358958R2) $9.70

No
Picture
Spindle Bushing - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 756, 806, 856, Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 3010, 3020, 4000, 4010, 4020, Replaces OEM number 7469, 1139-61539, A24K, B1A24K, For Heavy Duty Wide Front Ends, Length: 1.502", OD: 2.002", ID: 1.755", (Item #: 108895) $14.60

Spindle Bushing Kit - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 186, 404, 424, 444, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 786, 806, 826, 856, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 358958R2, 185106C1, 15943DA, (4) 358958R2 Bushings: 1-43/64" x 1-7/8" x 2", (2) 185106C1 Thrust Bearings: 1-3/4" ID x 2-3/4" OD, (2) 15943DA Dust Seals: 2-3/8" x 3" x 1/4", For Bushing use Item #: 102176, (Item #: 104350) $58.00

No
Picture
Spindle Jam Nut - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2404, 2424, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 5088, 5288, 5488, 21026, 21206, 21256, 21456, Replaces International OEM number 427546, 1-3/8"-12, (Item #: 100852) $4.00

Spindle, LH - This spindle is for High Crop only. Spindle measures A= 24.250 inch, B= 1.667 inch, C= 1.780 inch, D= 1.375 inch. For tractor models 1026, 1066, 1086, 1466, 1468, 1486, 21026, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3688, 656, 666, 686, 706, 756, 766, 786, 826, 856, 886, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. The wheel bearing kit used for this spindle is part number FW120FS. (Item #: 104343, Ref: 384257R93) $376.00

Spindle, LH - This spindle measures A= 12.375 inch, B= 1.667 inch, C= 1.780 inch, D= 1.375 inch. For tractor models 1026, 1206, 1256, 560, 656, 706, 756, 806, 826, 856. The wheel bearing kit used for this spindle is part number FW120FS. (Item #: 100843, Ref: 383912R92) $157.00

Spindle - LH, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 706, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1466, 1468, 1486, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3688, Replaces International OEM number 384257R93, Dimension A: 24.250", Dimension B: 1.667", Dimension C: 1.780", Dimension D: 1.375", Left Side, For a new version of this item use Item #: 104343, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434690) $166.01

Spindle, RH - This spindle is for High Crop only. Spindle measures A= 24.250 inch, B= 1.667 inch, C= 1.780 inch, D= 1.375 inch. For tractor models 1026, 1066, 1086, 1466, 1468, 1486, 21026, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3688, 656, 666, 686, 706, 756, 766, 786, 826, 856, 886, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. The wheel bearing kit used for this spindle is part number FW120FS. (Item #: 104344, Ref: 384258R93) $410.00

Spindle, RH - This spindle measures A= 12.375 inch, B= 1.667 inch, C= 1.780 inch, D= 1.375 inch. For tractor models 1026, 1206, 1256, 560, 656, 706, 756, 806, 826, 856. The wheel bearing kit used for this spindle is part number FW120FS. (Item #: 100842, Ref: 383913R92) $205.00

Stay Rod Assembly - Stay Rod Assembly "Wishbone" fits wide front end tractors. For tractor models 1206, 1256, 300, 350, 400, 450, 460, 544, 560, 656, 660, 666, 686, 706, 756, 806, 826, 856, H, Hydro 70, M, Super H, Super M, Super MD. Replaces 10546D, 360405R11 VERIFY PART NUMBER IN PARTS MANUAL FOR YOUR TRACTOR. (Item #: 167990, Ref: 360405R11) $505.00

Stay Rod Cap - For tractor models 1026, 1206, 1256, 1456, 544, 560, 656, 666, 706, 756, 806, 856, Hydro 70. (Item #: 108884, Ref: 60763DB) $15.00

No
Picture
Stay Rod Cap Shim - For Hydro 70, 1026, 1206, 1256, 1456, 544, 560, 656, 666, 706, 756, 806, 856. (Item #: 111364, Ref: 60762D) $4.60

Stay Rod Cap, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3688, 21026, 21206, 21256, 21456, Replaces International OEM number 379953R1, 2 Bolt, For a new version of this item use Item #: 110265, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410265) $8.51

Stay Rod Socket - For tractor models 1026, 1206, 1256, 1456, 544, 560, 656, 666, 706, 756, 806, 826, 856, Hydro 70. (Item #: 108814, Ref: 535861R1) $28.70

Steering Arm - Center For 544, 560, 656, 666, 686, 706, 756, 806, 826, 856, 1026, 1206, 1256 (Item #: 100881, Ref: 358970R1) $99.00

Steering Arm - Left or right hand - keyed. For tractor models 544, 656, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456. (Item #: 100884, Ref: R2949) $113.00

No
Picture
Steering Arm - Left hand - 2 inch diameter splined. For tractor models 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456. (Item #: 100886, Ref: R0264) $148.00

Steering Arm - Right hand - 2 spline. For tractor models 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456. (Item #: 100885, Ref: R0265) $182.00

Steering Arm - Left Hand, Used - For International tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 806, 856, Compatible with John Deere tractor models 60 (2 piece pedestal), 70 (2 piece pedestal), 620 (2 piece pedestal), 630 (2 piece pedestal), 720 (2 piece pedestal), 730 (2 piece pedestal), 2510, 2520, 3010, 3020, 4000, 4010, 4020, Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650, Replaces OEM number 2130, Schwartz, For a new version of this item use Item #: 109364, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454518) $47.01

No
Picture
Steering Arm, LH - Left hand for a Schwarts front end. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 109364, Ref: 2130) $93.00

No
Picture
Steering Arm, RH - Right Hand for a Schwarts front end. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 108808, Ref: 2129) $88.00

Steering Arm - Right Hand and Left Hand, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 2544, 2706, 2826, 2856, 21026, 21206, 21256, Replaces International OEM number 383914R1, Left or Right Side, 1.667" diameter hole, .250" keyway, For a new version of this item use Item #: 100884, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400884) $65.01

Steering Arm - Right Side, Used - For International tractor models H, M, Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 756, 806, 856, Compatible with International Header(s) 700, Compatible with International Harvester(s) 730, 830, Compatible with International Planter(s) 800, Compatible with International Tillage(s) 700, Compatible with International Hay Cutting(s) 730, Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650, Replaces OEM number 2129, Right Hand, Schwartz, For a new version of this item use Item #: 108808, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454517) $47.01

Steering Bracket Assembly - For International / Farmall tractor models H, M, MTA, Super H, Super M, 300, 350, 400, 450, 460, 544, 560, 656, 706, 756, 806, 856, Replaces International OEM number 3049, (Item #: 110829) $100.00

Steering Hand Pump Assembly, Used - For International tractor models 706, 806, 1256, 1456, 2706, 2806, 21256, 21456, Replaces International OEM nos 382579R92, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438854) $360.01

No
Picture
Steering Pilot Valve, Used - For International tractor models 504, 606, 656, 706, 806, 1206, 2504, 2606, 2656, 2706, 2806, Compatible with International Combine(s) 403, Compatible with International Hay Cutting(s) 375, Replaces International OEM nos 379645R93, 379645R91, 379645R92, 534502R91, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438492) $153.01

Steering Shaft Cross and Bearing (U-Joint) - Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Some models use more than one, sold individually. Some models used different sizes, verify measurements. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862 (Item #: 115351, Ref: 70224890) $11.00

Steering Wheel - 16 inch diameter. Mounts on 13/16 inch (36 spline) shaft. For the following tractors WITH POWER STEERING : HYDRO 70, HYDRO 84, HYDRO 86, HYDRO 100, HYDRO 186, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 4386, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788. Replaces IHS542. Cap is available separately as part number 68837C3. (Item #: 101432, Ref: 385156R1) $45.00

Steering Wheel - Tilt type 36 spline, 7/8 inch shaft, 3 covered spokes. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. Uses cap 400220R1. (Item #: 122473, Ref: 400217R1) $94.00

Steering Wheel Boot - Rubber cover for Orbit Motor. For tractor models 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 4156, 4166, 4186, Hydro 70, Hydro 86, Hydro 100. Replaces IHS682. (Item #: 126655, Ref: 382587R1) $16.70

Steering Wheel Cap - For tractor models 404, 504, 606, 706, 806, 56, early 66. "Power Steering". (Item #: 101435, Ref: 378395R1) $48.50

Steering Wheel Cap - For Models with Power Steering. Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101433, Ref: 366566R1) $55.00

Steering Wheel Cap - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 186, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 404, 424, 4386, 444, 454, 4586, 464, 4786, 484, 504, 5088, 5288, 544, 5488, 574, 584, 606, 6388, 656, 6588, 664, 666, 674, 6788, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86. (Item #: 108550, Ref: 68837C3) $8.80

Steering Wheel Cap - Use with steering wheel 400217R1. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. Gasket available as p/n 402434R1. (Item #: 124179, Ref: 400220R1) $106.00

Steering Wheel Cap Gasket - Use with steering wheel cap 400220R1. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. (Item #: 109446, Ref: 402434R1) $12.80

Steering Wheel Cap, Models without Power Steering - Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101434, Ref: 366558R1) $64.00

Steering Wheel Cap Mounting Plate - This Steering Wheel Cap Mounting Plate is for Tilt Steering on 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568, 706, 756, 766, 806, 826, 856, 966, Hydro 100. Replaces 400395R1. (Item #: 172978, Ref: 400395R1) $15.50

Steering Wheel Cover, Tilt - Made of plastic. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. (Item #: 179248, Ref: 400213R1) $75.01

Steering Wheel Horn Button Spring - Used with 400220R1 steering wheel cap on 806, 1066, Hydro 100, 706, 756, 766, 826, 856, 966, 1026, 1256, 1456, 1466, 1468, 1566, 1568. The cap will not fit correctly without the spring. (Item #: 180150, Ref: 400396R1) $5.20

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $8.00

No
Picture
Steering Wheel Release Lever Knob - Use with 400214R21 release lever. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. (Item #: 180477, Ref: R5148) $15.20

No
Picture
Steering Wheel Release Lever, Tilt - For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. (Item #: 179955, Ref: 400214R21) $16.70

Taper-Lok Assembly Set of 2 - The two Taper-Lok spindles measure 12.875 inches shaft, 1.667 inches shaft diameter, 1.780 inches inner bearing, 1.375 inches outer bearing, and a Spline Count of 17. This is a set of TAPER-LOK Spindles, 1 left hand steering arm, 1 right had steering arm, snap rings, nuts, and washers. If wheel bearings are needed, order FW120FS, (Item #: 111392, Ref: 71785TLS) $565.00

Thrust Bearing - For tractor models 684, 685, 685XL, 686, 695, 695XL, 706, 756, 766, 782, 784, 786, 806, 826, 856, 86 SERIES with AXLE PIVOT BALL, NOT PIN), 88 SERIES EARLY with AXLE PIVOT BALL, NOT PIN), 884, 885, 885XL, 886, 895, 895XL, 966, 986, H, HV, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86, M, MTA, Super H, Super HV, Super M. 1.755 inches inside diameter, 2.685 inches outside diameter, 0.694 inches wide. Replaces 185106C1, 185106C91, 357349R91, 361034R91, 369131R91, 387231R91, 405831R91, 527295R91, 844398R91 (Item #: 102174, Ref: 185106C1) $12.80

Thrust Bearing, Axle - Standard duty. Fits Schwartz/Speeco type front ends. For tractor models 300, 350, (354, 364 last serial number models), 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, (B414 last serial number models), H, M, MTA, Super H, Super M. Replaces OEM number 392671M91. Also replaces SCHWARTZ part number 60351. (Item #: 107048, Ref: T163) $21.10

Tie Rod - Long notched With seal and stud nut for Swartz front end. 18 inches long from center of ball joint to end of shaft. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H. (Item #: 111711, Ref: 22513) $33.80

Tie Rod Assembly - Complete assembly contains the following items: 359984R93 Tie Rod- Outer, 359986R1 Clamp, 374062R1 Jam Nut, 383917R1 Tube, 384006R92 Tie Rod- Inner. Fits HYDRO 100, HYDRO 186, HYDRO 70, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1568, 1586, 460, 544, 560, 656, 660, 666, 706, 756, 766, 806, 826, 856, 966, 986. Fits Factory International wide front axles only. Will not fit Schwartz, Speeco, Norden or other aftermarket wide front axles. (Item #: 100869, Ref: 223313) $80.00

Tie Rod Clamp - For International / Farmall tractor models Hydro 70, Hydro 100, Hydro 186, 460, 544, 560, 656, 660, 666, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1568, 1586, Replaces International OEM number 359986R1, (Item #: 104414) $3.20

Tie Rod, DU Axle - Used on Schwartz front ends, this is a sealed (New Style) Tie Rod. It measures 18.750 inches from center of ball joint to end of rod. The rod has a 1 inch diameter. (Item #: 108804, Ref: 22813) $62.00

No
Picture
Tie Rod End, Inner - Left Hand - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 384005R91, 3.75" Long, 1" Diameter, 16 Left Hand Thread, (Item #: 100873) $14.10

No
Picture
Tie Rod, Inner - Inner tie rod with jam nut, seal and stud nut. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 103164, Ref: 22512) $35.00

Tie Rod Jam Nut - For International / Farmall tractor models Hydro 70, Hydro 100, Hydro 186, 460, 544, 560, 656, 660, 666, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1568, 1586, Replaces International OEM number 374062R1, 1.000" - 16 RH thread, (Item #: 104411) $8.20

Tie Rod Tube - Tube only. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 108807, Ref: 1606) $40.40

Tie Rod Tube - For International / Farmall tractor models Super H, Super M, Super MTA, 300, 350, 400, 450, 460, 504, 544, 560, 656, 706, 756, 806, 856, Compatible with John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Compatible with Oliver tractor models 770, 880, 1550, 1600, 1650, Replaces OEM number 22514, (Item #: 110782) $48.60

Tie Rod Tube Kit - For a Swartz front end. Kit includes, 1 tie rod tube, 1 plug, 1 ball stud, 2 1/8 inch cotter pins, 1 dust seal. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Item #: 112262, Ref: 22812) $71.00

Wheels

No
Picture
Complete Front Hub Assembly - For International / Farmall tractor models 400, 450, 460, 544, 560, 656, 706, 756, 806, 856, Compatible with John Deere tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, Replaces OEM number 119999, 120000, 120001, 120002, 119998, Additional Handling and Oversize Fees Apply To This Item, (Item #: 120006) $163.00

Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $15 shipping due to weight. (Item #: 103764, Ref: FW60156) $104.00

Front Wheel Bearing - Bearing kit for front wheel, contains inner cone, inner cup, outer cone, outer cup, oil seal. For tractors: 1026, 1066, 1086, 1206, 1246, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 2504, 2606 HD Front Axle, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 5088, 5288, 5488, 544, 5488, 460 hi clear, 560, 606, 656, 666, 685, 686, 706, 756, 754, 766, 786, 806, 826, 856, 886, 915, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86 (Item #: 100856, Ref: FW120FS) $34.50

Front Wheel Bearing Kit - Bearing kit, for front wheel, Contains Bearing LM603049-BP 1.781 inches ID, Bearing Cup LM603011-BP 3.062 inches OD, Bearing LM48548-BP 1.375 inches ID, Bearing Cup LM48510-BP 2.562 inches OD, Wear Sleeve 48703D-BP Hub Cap Gasket 369860R1 Lip Type Seal 22322-BP 2.250 inches ID, 3.250 inches OD. For tractor models 3688, 460, 504, 5088, 5288, 544, 5488, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 100856, Ref: 371418R91) $34.50

Front Wheel Hub, 6 Bolt - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21026, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3688, 5088, 5288, 544, 5488, 560, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 100, Hydrp 186, Hydro 70, Hydro 86. Hub uses FW120FS wheel bearing kit. Replaces: 370256R11, 370256R21, 391823R11 (Item #: 100877, Ref: 391823R11) $57.00

Front Wheel Hub, 8 Bolt - For tractor models 1026, 766, 966, 1066, 1466, 754, 2756, 826, 2826, 856, 2856, 1586, 786, 886, 986, 1086, 1486, 1566, 1568, 3088, 3288, 3688, 5088, 5288, 5488, 666, 815, 1206, 1246, 1468, 706, 2706, 806, 2806, 685, 915. Replaces 1323559C1. Uses FW120FS bearing kit, not included. (Item #: 100878, Ref: 391824R11) $100.00

Front Wheel Hub Seal - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 544, 560, 584, 585, 656, 666, 674, 684, 685, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 885, 886, 966, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488 Replaces International OEM number 370254R1, , Compatible with John Deere Combine (s) 6600, Compatible with John Deere Harvester (s) 484, 5200, 5400, 5440, 5460, Replaces John Deere OEM number AH75484, (Item #: 123837) $9.60

Rear Wheel Hub Clamp, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4366, 4386, 6388, 6588, 6788, 21026, 21206, 21256, Replaces International OEM nos 68806C1, Replaces International Casting nos 380863R2, Does not include bolts, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496993) $79.01

Rear Wheel Wedge Kit - 3.250 inch, includes 2 wedges and 1 bolt. For tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 856, 966, 986, 1026, 1066, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788. Wedges NOT sold separately. (Item #: 108777, Ref: 1287801C91) $155.00

Rim Clamp Fixed, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 21026, 21206, 21256, 21456, Replaces International OEM nos 397251R1, 380871R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499564) $10.01

Rim Clamp, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 666, 686, 706, 756, 766, 786, 806, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 21026, 21206, 21256, Replaces International OEM number 380870R1, For a new version of this item use Item #: 157781, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499563) $10.01

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 365326R1. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.60

No
Picture
Torque Amplifier Shaft Oil Slinger - For International / Farmall tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 21256, 21456, Replaces International OEM number 8301011, This oil slinger will help to reduce clutch failures caused by the TA leaking into the clutch housing that is common with tractors that continue to operate with well-worn Torque Amplifiers, The slinger is installed on the TA shaft in front of the TA bushing and helps deflect excess oil coming out of the TA away from the PTO gear seal, (Item #: 176790) $35.90

No
Picture
Wheel Bearing Kit - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, 544, 560, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Inner Bearing race I.D.: 1.780", Outer Bearing race I.D.: 1.375", Includes: Inner Bearing Cone and Cup, Outer Bearing Cone and Cup and 2 piece Seal without Retainer, (Item #: 176997) $56.68

Wheel Bolt - This wheel bolt fits the following tractor models: A, B, BN, Super A, 100, 130, 140, B-250, B-275, B-414, 1026, 1066, 1086, 1206, 1256, 140, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 240, 2404, 2424, 2444, 3088, 3288, 330, 340, 354, 364, 384, 404, 424, 444, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 444, Hydro 100, Hydro 186, Hydro 70, Hydro 86, 240, 2404, 300, 330, 340, 3444, 350, 364, 384, 404, 424, 454, 460, 464, 484, 574, 584, 606, 674, 684, 784, 884, B-250, B-275, B-414, 300, 350, 354. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part number 51485D. (Item #: 108605, Ref: WB916) $2.20

Wheel Clamp Bolt - Rear Rim - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Replaces International OEM number 393772R1, For Nut use Item #: 157781, (Item #: 157779) $7.30

Wheel Clamp - Rear Wheel - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Replaces International OEM number 380870R1, (Item #: 157781) $25.90

No
Picture
Wheel Hub - 6 bolt. For tractor models 544, 560, 656, 666, 686, 706, 766. (Item #: 100877, Ref: R2312) $57.00

Wheel Hub, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 504, 544, 560, 606, 656, 656U, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 5088, 5288, 5488, 21026, 21206, 21256, 21456, Compatible with International Combine(s) 815, 915, Compatible with International Harvester(s) 782, 1400, Replaces International OEM number 391823R11, HH391823, Replaces International Casting nos 370256R2, Casting No 370256R2, 6 bolt, For a new version of this item use Item #: 100877, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400877) $41.01

No
Picture
Wheel Wedge Bolt - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 966, 986, 1026, 1066, 1456, 1466, 3088, 3288, 3488, 3688, 6788, Replaces International OEM number 223312, 7/8" NF Thread, (Item #: 111980) $69.00

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Decals and Emblems

Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Item #: 183484, Ref: S.67826) $15.80

Decal, IH Block - "IH" logo, 11 inches. (Item #: 183564, Ref: R4682) $17.40

Decal, IH Block - "IH", 3 inch x 3 1/4 inch Block. (Item #: 101094, Ref: R4681) $6.40

Decal, IH Block - "IH" logo, 1 3/4 inch. (Item #: 183266, Ref: R4680) $5.00

Decal, IH Block - "IH", 1 1/4 inch Logo . (Item #: 183058, Ref: R4679) $3.90

Decal, IH Block - "IH" logo, 7 inches printed on vinyl. (Item #: 183292, Ref: R5171) $25.80

Decal, IH Block - "IH" logo, 8 inches printed on vinyl. (Item #: 183123, Ref: R5172) $30.50

Decal, IH Block - "IH" logo, 10 inches. (Item #: 183276, Ref: R5173) $36.60

Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Item #: 183334, Ref: R5174) $2.60

Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Item #: 183338, Ref: R5175) $3.90

Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Item #: 183347, Ref: R5176) $5.00

Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Item #: 183352, Ref: R5177) $14.20

Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Item #: 183255, Ref: R5178) $7.50

Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Item #: 183265, Ref: R5179) $16.60

Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Item #: 183547, Ref: R5180) $12.40

Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Item #: 183556, Ref: R5181) $14.80

Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Item #: 183560, Ref: R5182) $14.20

Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Item #: 183543, Ref: R5183) $25.50

International Decal - 8-1/2 inch long, white with black outline. (Item #: 183068, Ref: R0679) $9.40

International Decal - 23 inches long, black block letters. (Item #: 183477, Ref: R0680) $12.40

International Decal - 23 inches long, white with black outline. (Item #: 183478, Ref: R0681) $16.60

International Decal - 26 inches long, black block letters. (Item #: 183481, Ref: R0682) $14.80

International Decal - 26 inches long, white with black outline. (Item #: 101032, Ref: R0683) $14.00

International Decal - 29 inches long, black block letters. (Item #: 101030, Ref: R0684) $10.50

International Decal - 29 inches long, white with black outline. (Item #: 101033, Ref: R0685) $17.50

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Item #: BTW28) $35.98

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Item #: 108299, Ref: X30042) $62.15

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $19.20

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $16.80

Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $19.20

$Farmall 706 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $16.80

Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Item #: 105581, Ref: 182548M92) $25.00

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Farmall 706 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$Farmall 706 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Farmall 706 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

$Farmall 706 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$Farmall 706 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$Farmall 706 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.00

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $12.90

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $14.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1 (Item #: 117537, Ref: 47404DASSY) $30.10

$Farmall 706 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Gauges

No
Picture
Amp Gauge - This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Item #: 178963, Ref: IHS1837) $30.00

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Gauge - For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Item #: 110849, Ref: 41934DB) $49.57

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184153, Ref: FH1447) $364.00

Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184167, Ref: FH1448) $364.00

Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179611, Ref: FH14416) $439.00

Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179008, Ref: FH14417) $439.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $87.12

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $106.22

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $125.34

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10

Lights

Headlight Assembly, Teardrop- 12 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112414, Ref: 45640DB-12V) $43.10

Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Item #: 112415, Ref: 45640DB) $42.80

Light Bulb, Sealed Beam, 6 Volt - 4-1/2 inch number 4511. (Item #: 111227, Ref: 373661R91) $13.50

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

No
Picture
Sealed Beam Light - 6 Volt (Item #: 111938, Ref: R2712) $46.30

No
Picture
Sealed Beam Light - 12 Volt (Item #: 122080, Ref: R2713) $36.00

Switch, Light, with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Item #: 173803, Ref: L408-12V) $38.40

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $389.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $123.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.00

No
Picture
Paint, Farmall Red, 1 Gallon - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101108, Ref: TP110GAL) $55.00

No
Picture
Paint, Farmall Red, 1 Quart - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101107, Ref: TP110QT) $24.60

No
Picture
Paint, Farmall Red, Spray Can - This "Farmall" Red is for those models that were manufactured under the earlier FARMALL Brand (Not International). From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100720, Ref: TP110SP) $8.50

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.00

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, IH Blue, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101114, Ref: TP910GAL) $58.00

No
Picture
Paint, IH Blue, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101113, Ref: TP910QT) $24.00

No
Picture
Paint, IH Blue, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101112, Ref: TP910SP) $8.60

No
Picture
Paint, IH Red, 1 Gallon - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100722, Ref: TP905GAL) $56.00

No
Picture
Paint, IH Red, 1 Quart - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100721, Ref: TP905QT) $24.00

No
Picture
Paint, IH Red, Spray Can - This "IH" Red is for those models that were manufactured under the INTERNATIONAL Brand (Not Farmall). High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100720, Ref: TP905SP) $8.50

No
Picture
Paint, McCormick Deering Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108401, Ref: TP450GAL) $90.00

No
Picture
Paint, McCormick Deering Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108400, Ref: TP450QT) $35.00

No
Picture
Paint, McCormick Deering Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108399, Ref: TP450SP) $11.00

No
Picture
Paint, Off White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101117, Ref: TP900GAL) $62.00

No
Picture
Paint, Off White, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101116, Ref: TP900QT) $24.90

No
Picture
Paint, Off White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 101115, Ref: TP900SP) $8.20

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Universal Non Glare Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP120QT) $24.00

No
Picture
Paint, Universal, Non Glare Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP120SP) $8.50

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.00

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Grey and Red 19". Deluxe cover with 2 inches of foam padding. Does not fit all tractors, must have a pan type seat only. (Item #: 178995, Ref: R2599) $43.80

Tie-On Seat Cover - Red and White, 21" wide. Deluxe with 2 inches of foam. (Item #: 178155, Ref: R1015) $38.60

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $173.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 364343R92 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $78.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.00

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $57.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. (Item #: 183819, Ref: WHS064) $82.00