(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Case Tractor PTO


Click here to see parts by model


Case Overhaul Kit, PTO
- Fits 1259531 valve housing. Contains complete disc package, gaskets and o-rings. For tractor models 7110, 7120, 7130, 7140. (Part No: 977724)
$354.78

Case PTO Release Bearing
- PTO Release Bearing For David Brown Models 996, 1194, 1200, 1210, 1212, 1290, 1294, 1390, 1394, 1410, 1490, 1494, 1590, 1690, 1694 (Part No: K19177)
$54.76

No
Picture
Case PTO Shaft
- 540 RPM PTO Shaft For 730, 830, 930, 1030 With Single Speed PTO. 13.687 inches long, 33 spline. (Part No: A64592)
$264.42

No
Picture
Case PTO Shaft
- Dual Speed PTO Shaft measures 11 inches in length and has 32 front drive splines. For tractor models 770, 870, 970, 1070, 1175. (Part No: A58214)
$215.94

No
Picture
Case PTO Shaft
- Dual Speed PTO Shaft For 2090, 2290, 2094, 2294 (Part No: A140655)
$138.59

No
Picture
Case PTO Shafts
- 1000 RPM PTO Shaft For 1200, 1470 (Part No: A55445)
$80.16

No
Picture
Case PTO Shaft
- Rated 1000 RPM PTO Shaft For Late Serial numbers: 1270, 1370, 1570, 2390, 2590, 2394, 2594, 3394, 3594 With Single Speed PTO. Measures 10.1 inches long, 1 3\8 diameter and 32 drive splines. (Part No: A148833)
$162.14

No
Picture
Case PTO Shaft 20 Spline
- 1000 RPM PTO Shaft For Late SN# 1270, 1370, 1570, 2390, 2590, 2394, 2594, 3394, 3594 With Single Speed PTO (large 1.744 diameter). Shaft has 32 Drive Splines and is 10.725 inches long. (Part No: A148833SP)
$159.31

Case PTO Shafts
- 540 RPM PTO Shaft 10.656 inches long 10 drive splines. For 300B, 320, 310, 400B, 470, 430, 431, 530 With STD PTO. 10.656 inches long. 10 Splines on the tractor side. Replaces G10444, A37644, A39092 (Part No: A39092)
$123.87

No
Picture
Case PTO Shaft
- Dual Speed - 12 3\16 For 2090, 2094, 2290, 2294 (Part No: R2901)
$182.53

No
Picture
Case PTO Adapter
- PTO adapters are located under the PTO category in the Accessories & Universal Parts section. (Part No: MISC)
$0.00

Case PTO Drive Gear
- Fits; VA, VAC, VAC-11, VAC-12, VAC-13, VAC-14, VAE, VAH, VAI, VAIW, VAIW-3, VAO, VAO-15, VAS. Replaces: A29385, VT4022. 14 Teeth \ 10 Splines (Part No: A29385)
$32.50

Case PTO Driven Gear
- 38 teeth, 10 spline. For model VAC. Replaces VT4021. (Part No: A29384)
$76.35

Case Independent PTO Clutch Kit, Heavy Duty
- Kit includes 5 friction plates, 6 steel plates, 6 springs, 2 piston seals. For tractor models 884, 895, 995, 4210, 4230, 4240, C50, C60, C80, C90, C100. (Part No: 3125257R91)
$103.50

Case PTO SHAFT
- For tractor models B275, B414, 424, 444, 354, 364, 384, 3414, 2424, 2444. This shaft is 6 spline with 1 3\8 diametar, by 8 spline with a 1 1\2 Diameter. The length over all is 27 Inches. Replaces 751114R51, 3073111R91 (Part No: 3073111R91)
$100.05

Case PTO SLIDING CLUTCH
- PTO Sliding Clutch for tractor models B275, B414, 424, 444, 354, 364, 384, 3414, 2424, 2444 (Part No: 751113R2)
$51.00

Case PTO Shield
- For tractor models D, LA, RC, S Series and VA Series, 200B, 300B, 400B, 430, 470, 500B, 530, 530CK, 580CK, and 600B. Replaces O8303AB, B555AA, A27335, 2172AA. (Part No: A27335)
$52.65

Case PTO Safety Clutch, 40 HP
- 1-3\8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164)
$235.29

Case PTO Shield Mounting Plate
- This plate is required for mounting a PTO shield on the following Case Tractors: D, DC, DC-3, DC-4, DH, DI, DO, DV, L (serial number 4200000 and up), LA, R, RC, S, SC, SI, SO, 200B, 210B, 211B, 300, 300B, 301, 302, 310, 311, 312, 320, 350, 351, 400B, 410B, 411B, 430, 431, 440, 441, 470, 480B, 500, 500B, 510, 511, 530, 530CK, 531, 540, 541, 570, 580B, 600, 600B, 610, 611, 614, 630, 631, 632, 640, 641, 642, 900. Replaces original part numbers: G16775, O5386AB and VT2297. (Part No: G16775)
$28.35

Case PTO Shield Mounting Plate
- This plate is required for mounting a PTO shield to a Case VA, VAC, VAC-11, VAC-12, VAC-13, VAC-14, VAH, VAI, VAIW, VAO, VAO-15, VAS. It replaces original part number VT-2297, VT2297 (Part No: VT2297)
$23.35

Case PTO Shield
- This PTO Shield fits Case Crawler: 310, 310C, 310D, 310E, 310F, 310G (up to SN: 3039618), 320, 420, 420B, 420C, Terra Trac. Bare Metal. Replaces 23040, 13P503, 30A119, 13P503, 30A119, 114982 (Part No: 23040)
$85.50

Case PTO Shaft Oil Seal
- This seal fits the following tractor models as a PTO shaft oil seal: 310, 310C, 310D, 310E, 310F, 320, 420, 420B, 420C, and 310G. It has an inside diameter of 1.375 inches, an outside diameter of 2.000 inches, and is 0.337 inches wide. Replaces part number: 23033. (Part No: 8N7052A)
$4.45

No
Picture
Case PTO Brake Piston
- This PTO Brake Piston is for Case International models 4110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950. (Part No: 1289335C4)
$31.50

Case PTO Drive Gear
- This PTO Drive Gear has 14 Teeth and 15 Splines. It is used on 200, 200B, 210, 210B, 211, 211B, 300, 300B, 301, 301B, 302, 302B, 310, 311, 311B, 312, 312B, 320, 320B, 430, 430CK, 431, 440, 441, 470, 480, 480CK, 530, 530CK, 530CK, 531, 540, 541, 570, 580, 580CK, 310G, 350, 350B. (Part No: G10675)
$121.72

Case PTO Gear
- This PTO Gear has 46 teeth and 10 splines. It is used on 200, 430, 530, 470, 570, 580 Tractors. Replaces G10676 (Part No: G10676)
$129.28

Case PTO Clutch Disc
- This is a 9.875 inch, organic, rigid PTO Disc. It has a 1.125 inch, 10 spline hub center. It is used on 780, 880, 885, 1190, 1290, 1390, 950, 990, 995, 1194, 1294, 775, 1290 Live Drive, 1294 Live Drive, 1390 Live Drive, 380, 950 Live Drive, 990 Live Drive, 995 Live Drive. Replaces K89322, 1539030C1, SAT750. (Part No: K89322)
$100.74

No
Picture
Case PTO Clutch Separator Spring
- This PTO Clutch Separator Spring is for models 1070, 1090, 1170, 1175, 1270, 1370, 770, 870, 970. (Part No: A59013)
$13.56

No
Picture
Case PTO Clutch Driven Plate
- This PTO clutch driven plate is for models 1030, 1070, 1090, 1170, 1175, 1270, 1370, 2470, 2870, 430, 470, 530, 730, 830, 870, 930, 970. Replace part numbers A57170 and A65425. (Part No: A66365)
$5.57

No
Picture
Case PTO Clutch Drive Plate
- This PTO clutch drive plate measures 3.762 inches inside diameter, 5.268 inches outside diameter, has 24 teeth and is .077 inches thick. For tractor models 1030, 1070, 1175, 1270, 1370, 2470, 2670, 730, 830, 870, 930, 970. Replaces part number A66364, A59231. (Part No: 1981246C1)
$12.71

No
Picture
Case PTO Shifting Collar
- This PTO shifting collar is for models 1070, 1090, 1170, 1175, 1896, 2090, 2094, 2096, 2290, 2294, 770, 870, 970. (Part No: A58210)
$138.68

No
Picture
Case PTO Shift Collar Pin
- This PTO shift collar pin measures .3125 inches by .7188 inches. 2 used per tractor. For models MX100, MX110, MX120, MX135, MX80, MX90, 1070, 1090, 1170, 1175, 1896, 2090, 2094, 2096, 2290, 5120, 5130, 5140, 5220. (Part No: 137710A1)
$12.11


Click here to see parts by model







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2015 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.