FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Case 730 Tractor Parts

[Categories] [All Case Models] [Print]

Belts

Belt - Fan, Generator, Alternator, Set of 2 - For Case tractor models 730, 830, Replaces Case OEM number A21457, Set of 2, (Item #: 182124) $24.00

Brakes

Brake Actuating Disc - For Case tractor models 730, 830, 930, 930CK (Western Special), 1030, Replaces Case OEM number A31126, (Item #: 105472) $182.00

Brake Actuating Spring - Used with disc brakes. For tractor models 1030, D, DC, DO, DV, LA, 500, 700, 730, 800, 830, 900, 930, 940, 770. Replaces A30897, A41816. Priced each. Measures 1.209 inches overall length, .761 inches outside diameter with a wire diameter of .105. (Item #: 113798, Ref: A155624) $1.70

Brake Disc - 7 Inch Outside Diameter, 4 Inch Inside Pad Diameter, 24 spline, 3.19 Inch Spline Diameter. Replaces, A44712, A40794. For tractor models 1030, 400, 730, 770, 830, 870, 930, 930CK, 970. (Item #: 105469, Ref: 1975466C1) $18.70

Brake Pull Rod - For the following Case tractors 1030, 400, 700, 730, 800, 830, 930. Replaces O10838AB. (Item #: 168148, Ref: A28203) $45.60

Disc Brake Boot - For tractor models 1030, (LA from serial number 5418607and up), (D, DC, DE, DH, DI, DL, DO, DS, DV, S, SC, SE, SI, SO from serial number 5600001 and up), 400, 401, 410B, 411, 500, 600, 700, 800, 900, 930, 940, 970, (730 from serial number 8253501 and up), 770, (830 up to serial number 8253500), (870 up to serial number 8675001), 1070, (1175 from serial number 8715247 and up). Replaces O8762AB. (Item #: 115717, Ref: A27465) $11.10

Clutch

Clutch Disc, 12 Inch - This is a 12 inch, woven rigid disc. The hub is 1.75 inches with 16 spines. Replaces OEM numbers A33484, A33484-RO (Item #: 181992, Ref: A33484) $125.00

Clutch Disc - 12 inch - 4 Pad - This is a 4 pad, 12 inch Transmission Clutch Disc. It has a 1.75 inch, 16 spline hub. Replaces A34277 (Item #: 165360, Ref: 1997842C1) $132.00

Clutch Pressure Plate - This is a Cast Iron, 12 inch cast iron pressure plate. It is used on Tractor Models: 700, 730, 770, 800, 830, 870. Replaces A7674, N7101 (Item #: 172936, Ref: A7674) $149.00

Clutch Release Bearing - This Release Bearing measures: inside diameter 2.250 inch outside diameter 3.803 inch width .8085 inch. Replaces 48974D, 649106R91, N1171, A7538, 10A21384GV, 120795R91, 48974DGV, 618237R91, A2526-31, A7538GV, TPAT17464GV, TP-AT17464GV, 104810A, 72160065, AT17464. (Item #: 100013, Ref: 10A21384) $30.60

Clutch Release Throw Out Bearing - Greaseable - For Case tractor models 400 (s/n 8106131-later), 430 (s/n 8297801-8650135), 470 (s/n 8656925-later), 530 (s/n 8297801-8650135), 570 (s/n 8656925-later), 700, 730 (s/n 8253500-earlier), 730 (s/n 8253501-later), 800, 830 (s/n 8253500-earlier), 830 (s/n 8253501-later), Replaces Case OEM number A7538, A144152, I.D. Range: 2.250" - 2.499", I.D. 2.250", O.D. 3.800", Width: 0.801", (Item #: 168870) $46.50

Pilot Bearing - This Pilot Bearing measures 1.371 inches inside diameter, 2.441 inches outside diameter, 0.550 inches wide. It replaces OEM numbers: 920095082, 340400335, 80364908, 278792, 24905110, 24905290, A28237. (Item #: 107008, Ref: 6007-2RS) $12.20

Pressure Plate Assembly - This Pressure Plate Assembly is 12 inches, 3 lever, open center, (with a 1.406 inch flywheel step). It replaces A33109-R, A59589-R, A59589-RN, A357299, 357299R95 (Item #: 165361, Ref: A59589) $320.00

Cooling System

Radiator Hose - Lower - For Case tractor models 700 (Gas), 730 (Gas/Diesel), 800 (Gas), 830 (Gas/Diesel), Replaces Case OEM number A20384, 2.0" I.D., For Hose Clamp use Item #: 130469, (Item #: 159618) $19.50

Radiator Hose - Upper - For Case tractor models 730 (Gas/Diesel), 830 (Gas/Diesel), Replaces Case IH OEM number A24293, 2.50" I.D., 6.375" Long, (Item #: 159620) $16.20

Radiator - Without Cooler - For Case tractor models 730, 830 (s/n 8201146-later), Replaces Case OEM number A24312, A33625, Core Height: 21-1/2", Core Width: 18-1/4", Core Depth: 2-7/8", Overall Height: 29-1/8", Overall Width: 19-1/2", Outlet: 2", Inlet: 2-1/2", Filler Neck Height: 6", Fins Per Inch: 10, Rows: 4, Without Oil Cooler, For Radiator With Cooler use Item #: 169863, Additional Handling and Oversize Fees Apply To This Item, (Item #: 101681) $730.00

Thermostat - This Thermostat opens at 180 degrees F. It is used on the following Gas models: 1000, 400, 700B, 730, 800B, 830, 900, 940. Replaces A30954, A28114 (Item #: 110455, Ref: 70229927) $18.60

Thermostat, 160 Degrees - This is a 160-degree thermostat. Used on Case models Super 400, 400, 401, 402, 403, 405, 410, 411, 412, 413, 414, 415, 420, 425, 700, 701, 701B, 702, 702B, 703, 703B, 705, 705B, 710, 710B, 711, 711B, 712, 712B, 713, 713B, 715, 715B, 725B, 730, 730 Comfort King, 730 Draft-O-Matic, 730CK, 731, 732, 733, 734, 740, 741, 742, 743, 744, 800, 800B, 801, 801B, 802, 802B, 803, 803B, 805B, 810, 810B, 811, 811B, 812, 812B, 813, 813B, 815, 815B, 830, 830 Comfort King, 830 Draft-O-Matic, 831, 832, 833, 840, 841, 842, 843, 900, 900B, 910, 910B, 920B. Replaces 1002521M91, 185201M2, 226372, 228543, 70226372, 70228543, 830873M93, A11493, A28114, TG10608 (Item #: 150677, Ref: 226372) $23.40

Water Pump - Less pulley. For tractor models 730, 740, 830, 840 Replaces OEM numbers A48368, A21459, A153454. 3.055 inch Impeller, Shaft Extends 2 1/2 inch Beyond Bearing. (Item #: 111833, Ref: 939629) $140.00

Water Pump Gasket - Mounting - For Case tractor models 700, 730, 800, 830, 930, 1030, 1200, Replaces Case OEM number A57596, 09797AB, 1342741C1, (Item #: 160113) $18.10

Decals and Emblems

Case 730 Decal Set, Case-o-matic with No Screen, Vinyl - For Case tractor model 730 (CK Case-o-matic, no screen, 65-66), (Item #: 100460) $349.00

Case Decal, Eagle, Vinyl, 4" - For Case tractor models C, D, L, R, S, V, 200, 200B, 300, 350, 400, 430, 500, 530, 600, 630, 700, 730, 770, 800, 870, 900, 930, 970, 1030, 1070, 1175, 1200, 1210, 1270, 1370, 1390, 1490, 1570, 1690, Compatible with Case Construction and industrial models 310, 320, 420, 450, 680CK, Compatible with David Brown tractor models 880, Case Eagle decal, 4" dia., Vinyl decal, (Item #: 100514) $7.00

Case Decal, Eagle, Vinyl, 6" - For Case tractor models C, D, L, R, S, V, 200, 200B, 300, 350, 400, 430, 500, 530, 600, 630, 700, 730, 770, 800, 870, 900, 930, 970, 1030, 1070, 1175, 1200, 1210, 1270, 1370, 1390, 1490, 1570, 1690, Compatible with Case Construction and industrial models 310, 320, 420, 450, 680CK, Compatible with David Brown tractor models 880, Case Eagle decal, 6" dia., Vinyl decal, (Item #: 100515) $10.50

$Case 730 Case Decal, Eagle, Vinyl, 9-1\2 inch$
Case Decal, Eagle, Vinyl, 9-1/2" - For Case tractor models C, D, L, R, S, V, 200, 200B, 300, 350, 400, 430, 500, 530, 600, 630, 700, 730, 770, 800, 870, 900, 930, 970, 1030, 1070, 1175, 1200, 1210, 1270, 1370, 1390, 1490, 1570, 1690, Compatible with Case Construction and industrial models 310, 320, 420, 450, 680CK, Compatible with David Brown tractor models 880, Case Eagle decal, 9 1/2" dia., Vinyl decal, (Item #: 100516) $20.90

No
Picture
Decal Set - COMPLETE SET For 730 Case-o-matic Diesel with Long Hood/No Screen. 1960-1964. (Item #: 100453, Ref: R2263) $314.00

No
Picture
Decal Set - For model 730 Dual Range with Long Hood/No Screen. 1960-1964. Complete Decal Set (Item #: 100454, Ref: R2264) $314.00

No
Picture
Decal Set - For model 730, Dual Range Diesel with Long Hood/No Screen. 1960-1964. Complete Decal Set. (Item #: 100455, Ref: R2265) $314.00

No
Picture
Decal Set - For model 730 Comfort King, No Screen, 1965-1966. Complete Decal Set. (Item #: 100456, Ref: R2266) $349.00

No
Picture
Decal Set - For model 730 Comfort King with Screen, 1967-1968. Complete Decal Set. (Item #: 183346, Ref: R2267) $412.00

No
Picture
Decal Set - For model 730 Comfort King Diesel, No Screen, 1965-1966. Complete Decal Set. (Item #: 183356, Ref: R2268) $412.00

No
Picture
Decal Set - For model 730 Comfort King Diesel, with Screen, 1967-1968. Complete Decal Set. (Item #: 100459, Ref: R2269) $349.00

No
Picture
Decal Set - For model 730 Comfort King Case-o-matic, No Screen, 1965-1966. Complete Decal Set (Item #: 183354, Ref: R2270) $412.00

No
Picture
Decal Set - For model 730 Comfort King Case-o-matic with Screen, 1967-1968. Complete Decal Set. (Item #: 183353, Ref: R2271) $412.00

No
Picture
Decal Set - For 730 Comfort King Case-o-matic Diesel, No Screen, 1965-1966. Complete Decal Set (Item #: 100462, Ref: R2272) $349.00

No
Picture
Decal Set - For model 730 Comfort King Case-o-matic Diesel, with Screen, 1967-1968. Complete Decal Set. (Item #: 100463, Ref: R2273) $349.00

No
Picture
Decal Set, Complete - For model 730 Case-o-matic with Long Hood/No Screen. 1960-1964. (Item #: 100452, Ref: R2262) $314.00

Front Emblem - Chrome Case eagle Includes retaining clips. This Case Chrome Eagle emblem fits on the flat spot between the headlights. The Case Eagle Emblem measures 4 1/2" tall and 1 3/4" wide. The mounting holes on the emblem measure 2" center to center. For tractor models 200B, 300B, 310C, 310D, 310E, 310F, 400B, 430, 450, 500B, 530, 600B, 630, 700, 730, 800, 830, 930, 1030, 1200. Replaces A11492, A24526 . (Item #: 103885, Ref: A11492) $42.87

Drive Train

Comfort King, Range, Transmission Shifter Knob - Plastic Knob, 3/8 inch fine thread. For tractor models 730, 830, 930, 1030. (Item #: 126604, Ref: R4572) $5.50

Gear Shift Boot - Rubber Gear Shift Boot fits Case 200B, 300B, 400B, 500B, 600B, 430, 530, 630, 730, 830, 930, 1030, 470, 570, 480, 480B, 580 and 580B, Replaces A26956, A57876, O4867AB, O5920AB. (1-3/4 inches bottom I.D., 9/16 inch hole diameter) (Item #: 126658, Ref: R4803) $10.50

Electrical System

Distributor Cap - Prestolite Distributor Cap, clip Type . Fits 470, 480B, 480CK, 570, 580B, 580CK, 680CK, 730, 770, 830, 870 all with one of the following Prestolite distributors: IBT-4101S, IBT-4101 or IBT-4101U. Replaces AT14692, 21A448, A24564, 531452R1, A24564, 71907C1, 1047221M91. (Item #: 105566, Ref: AT14692) $14.90

Distributor Cap, Wico - For 730, 770, 830, 870, 700, 840 models using Wico distributor, clip type cap. Replaces A20785, AT14190, X30042 (Item #: 108299, Ref: AT14190) $62.15

Electronic Ignition Conversion Kit, 12 volt negative ground - 4-cylinder engines.For 470, 570 with G148B, G159; 730, 740, 840, 680CK with A251G, A284G; 830 with A-284G; 770, 870 with A251BG, A301BG. Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 12 volt negative ground system with a Prestolite distributor. MUST ALSO REPLACE CAP (Part # AL165) and ROTOR (Part # AL150) both available from an auto parts store. If you have a dust cap, you are required to enlarge the hole for the new rotor to fit. Fits the following distributors IBT-4702, IBT-4709, IBT-4707, IBT-4706, IBT-4705, IBT-4701, IBT-4501, IBT-4405, IBT-4404, IBT-4403A, IBT-4105A, IBT-4106A, IBT-4106C, IBT-4402, IBT-4001G, IBT-4102A (Item #: 105090, Ref: 1542) $160.00

Electronic Ignition Conversion Kit, 12 volt positive ground - For 470, 570 with G148B, G159; 730, 740, 840, 680CK with A251G, A284G; 830 with A-284G; 770, 870 with A251BG, A301BG. Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 12 volt positive ground system, use with Prestolite distributor using the "A" type rotor which is "T" Shaped. CAP (Part # AL165) and ROTOR (Part # AL150) both available from an auto parts store. If you have a dust cap, you are required to enlarge the hole for the new rotor to fit. (Item #: 108152, Ref: 1542P12) $155.00

Electronic Ignition Conversion Kit, Wico DB distributor # X30091E - 12 Volt Negative Ground. For 730, 830, 740, 840, 900, 930, all with Wico DB distributor # X30091E. Pertronix Electronic Ignition Conversion Kit. (Item #: 108153, Ref: WO141) $166.00

Fuse Holder - Mounts on 5/8 inch diameter hole. 2 spade connectors. Replaces: 578489, cap: A10958, A22874, A8006, D122429, D23834, D49077, F63019, G44876, T39463 (Item #: 112273, Ref: 376852R91) $10.40

Key Switch - 4 terminal, 3 position, with keys. For tractor models (1030 diesel), (430, 470, 480, 480B, 530, 570, 580, 580B, 584, 585, 586, 630, 730, 830, 930 all gas). (Item #: 153459, Ref: A24511) $20.30

Key Switch - 5 terminal, 3 position, with keys. For tractor models 1150E, 430, 470, 480, 530, 570, 580, 480B, 580B, 630, 730, 830, 930, 1200, 1470, W5A, 1155E all with diesel engines. (Item #: 178392, Ref: A24510) $36.00

Neutral Safety Starter Switch - Built to OEM specification, this Neutral Safety Starter Switch has the following measurements: 35 amp at 12 Volt, 20 amp at 24 Volt, 9/16-18 thread UNF-2A, 5/16 inch stem length, 1-1/8 inch hex head. Used on Case: 430, 530, 630, 730, 930, 1030, 770, 830, 870, 970, 1030 Comfort King, 1031, 1032, 1070, 1090, 1170, 1175, 1270, 1370, 2470, 940, 830 Comfort King, 732, 743, 832, 730 Comfort King, 843, 831, 932, 930 Comfort King, 842, 731, 734, 931, 733, 833, 941, 431, 435, 441, 445, 531, 535, 540, 541, 545, 631, 632, 634, 640, 641, 642, 644, 740, 741, 742, 744, 840, 841. Replaces G44873, A20990, 716945, 80716945 (Item #: 178501, Ref: A20990) $20.20

No
Picture
Starter, Delco - 9 teeth, clockwise rotation, 12 volt. For tractor models (1000 with 284 gas), 730, 830, (840 gas 1961-1968), (930 gas 1965-1969), (930 western SN# 8314293 and up gas). Replaces Delco 1107771, 1107877, 1108281, and 1108340. Refundable $90.00 core charge will be added to your order. (Item #: 203457, Ref: A57092) $416.70

Starter, Delco - 12 teeth, clockwise rotation, 12 volt. For tractor models 1000 with diesel, 730, 830, TD18A. **A refundable core charge OF $80.00 WILL BE ADDED TO THE ORDER*** Replaces 1113634, 1113665, 323-734, A21281, A47468 (Item #: 203545, Ref: A21281) $502.30

No
Picture
Starter - Delco Style DD (3793) - For Case tractor models 400 (Series, Round Nose), 700 (series), 730 (series), 800 (series), 830 (series), 930, Compatible with Case Combine (s) 800, Compatible with Case Construction and industrial models W7, 680CK, Replaces Case OEM number A21281, A47468, Replaces Delco Remy manufacturer number 1113634, 1113665, 323-734, Replaces manufacturer number 141-274, 3793, Delco Style Direct Drive, Voltage: 12, Rotation: Clockwise, Teeth: 12, For diesel applications, For a Remanufactured version of this sku use Item #: 203145, (Item #: 160367) $464.00

No
Picture
Starter - Delco Style DD (3793), Remanufactured, A21281, Delco Remy, 1113634 - For Case tractor models 400 (Series, Round Nose), 700 (series), 730 (series), 800 (series), 830 (series), 930, Compatible with Case Combine (s) 800, Compatible with Case Construction and industrial models W7, 680CK, Replaces Case OEM number A21281, A47468, Replaces Delco Remy manufacturer number 1113634, 1113665, 323-734, Replaces manufacturer number 141-274, 3793, Diesel Applications Only, Sealed unit - will work with Case-O-Matic and Dry Clutch, Delco Style: Direct Drive, Voltage: 12, Rotation: Clockwise, Teeth: 12, For a New version of this sku use Item #: 160367, (Item #: 203145) $456.20

Starter Solenoid - This is a 12 volt starter solenoid. It Fits: 1070 Diesel use with starter 1113478, 1113399, (1090, 1170, 1175, 1270, 730, 770, 830, 870, 930, 970 all Diesel), (1370, 1470, 1570, 2470 all Diesel use with starter 1113399). Replaces: A40461, A42326, A43846, A44894, A44817 (Item #: 105672, Ref: 1115510) $30.00

Voltage Regulator - For 700, 730, 800, 830, 900, 930, 940, 1030; combines 800, 1000, 1010, 1060. External Voltage Regulator replaces Delco 1118991. (Item #: 105293, Ref: A20792) $33.40

Engine Bearings

Camshaft Bearings - Standard Camshaft Bearings for 2.247 journal camshaft used in tractor models 400, 680, 700, 730, 740, 800B, 810, 830, 840 all gas or diesel engines. Replaces A23577. Engines: Case A267DB, A251B Gas, 267BD, 336BD, A301D, 301B (Item #: 106142, Ref: 811224) $65.00

Connecting Rod Bearing - .002 - For Case tractor models 400, 730, 770, 830, 840, 900, 930, 940, 970, 1030, 1090, 1170, 1175, 1200, 1270, 2090, 2094, 2290, 2294, Compatible with Case Construction and industrial models W7, W8, W9, W10, W18, W18B, W20, 680, 750K, 850, 1150, 1155D, Replaces Case OEM number A20579, A43159, A7182, .002" Oversize, Sold per journal, (Item #: 106115) $20.70

Connecting Rod Bearing - .010" Oversize - Journal - For Case tractor models 400, 730, 770, 830, 840, 900, 930, 940, 970, 1030, 1090, 1170, 1175, 1200, 1270, 2090, 2094, 2290, 2294, Compatible with Case Construction and industrial models W8, W9, W10, W14 (s/n 2571281-later), W18, W18B, W20, 680, 680E, 680G, 680H, 750K, 850, 855E, 1150, 1155D, Replaces Case OEM number A20569, A43174, .010" Oversize, Sold per journal, For Standard connecting rod bearing use Item #: 106119, (Item #: 106116) $19.10

Connecting Rod Bearing - .020" Oversize - Journal - For Case tractor models 400, 730, 770, 830, 840, 900, 930, 940, 970, 1030, 1090, 1170, 1175, 1200, 1270, 2090, 2094, 2290, 2294, Compatible with Case Construction and industrial models W7, W8, W9, W10, W12, W14 (s/n 2571281-later), W18, W18B, W20, 680, 750K, 850, 1150, 1155D, Replaces Case OEM number A20573, A43776, .020" Oversize, Sold per journal, For Standard connecting rod bearing use Item #: 106119, (Item #: 106117) $17.20

Connecting Rod Bearing - .030" Oversize - Journal - For Case tractor models 400, 730, 770, 830, 840, 900, 930, 940, 970, 1030, 1090, 1170, 1175, 1200, 1270, 2090, 2094, 2290, 2294, Compatible with Case Construction and industrial models W7, W8, W9, W10, W14 (s/n 2571281-later), W18, W18B, W20, 680, 680E, 680G, 680H, 750K, 850, 1150, 1155D, Replaces Case OEM number A20576, A43177, .030" Oversize, Sold per journal, For Standard connecting rod bearing use Item #: 106119, (Item #: 106118) $16.80

Connecting Rod Bearing - .040" Oversize - Journal - For Case tractor models 400, 730, 770, 830, 840, 900, 930, 940, 970, 1030, 1090, 1170, 1175, 1200, 1270, 2090, 2094, 2290, 2294, Compatible with Case Construction and industrial models W7, W8, W9, W10, W14 (s/n 2571281-later), W18, W18B, W20, 680, 680E, 680G, 680H, 750K, 850, 855E, 1150, 1155D, Replaces Case OEM number A20576, A43177, .040" Oversize, Sold per journal, For Standard connecting rod bearing use Item #: 106118, (Item #: 106119) $27.00

Main Bearings - .010" Oversize - Set - For Case tractor models 400, 730, 770, 830, 840, Compatible with Case Construction and industrial models W7, W14, 680, 680E, 680G, 680H, 750K, 850, Replaces Case OEM number A42487, A42483, .010" Oversize, Sold in complete set (does not include thrust washers), For Standard main bearing use Item #: 106127, (Item #: 106125) $108.00

Main Bearings - .020" Oversize - Set - For Case tractor models 400, 730, 770, 830, 840, Compatible with Case Construction and industrial models W7, W14, 680, 680E, 680G, 680H, 750K, 850, Replaces Case OEM number A42193, A20585, A42484, A42488, .020" Oversize, Sold in complete set (does not include thrust washers), For Standard main bearing use Item #: 106127, (Item #: 106126) $93.00

Main Bearings - .030" Oversize - Set - For Case tractor models 400, 730, 770, 830, 840, Compatible with Case Construction and industrial models W7, W14, 680, 680E, 680G, 680H, 750K, 850, 855E, Replaces Case OEM number A42489, A42485, A43162, A43167, .030" Oversize, Sold in complete set (does not include thrust washers), For Standard main bearing use Item #: 106126, (Item #: 106127) $93.00

No
Picture
Main Bearing Set - Less Thrust Washers Available in STD, .010, .020, .030 For 400 Super, 680CK, 700, 730, 740, 800 with A267D Diesel Engine (Item #: MS-1497P) $97.00

Main Bearings - Standard - Set - For Case tractor models 400 (gas or diesel), 730 (gas or diesel), 770 (diesel), 830 (diesel), 840 (diesel), Compatible with Case Construction and industrial models W7 (diesel), W14 (diesel), 475 (diesel), 680 (diesel), 680E (diesel), 680G (diesel), 680H (diesel), 850 (diesel), Replaces Case OEM number A42490, A42492, Standard Size, Sold in complete set (does not include thrust washers), For .010" main bearing use Item #: 106127, (Item #: 106124) $115.00

No
Picture
Rod Bearing, STD - Price is for Bearings for 1 Rod. For tractor models 1000, 1010, 1030, 1060, 1070, 1090, 1150, 1150B, 1150C, 1160, 1170, 1175, 1200, 1270, 2290, 2294, 700B, 730, 740, (750 SN# 7070351 and below), 770 4 cylinder 800B, 830, 850, 930, 970, (Super 400 diesel SN# 8106131 and up), W10, W10E, W12, W18, W20, W7, W7C, W8, W8E, W9, W9A, W9E. (Item #: 106114, Ref: A43173) $17.70

Snap Ring Clutch PTO Transmisison - For Case tractor models 730, 770, 830, 870, 930, 970, 1030, 1070, 1090, 1170, 1175, 1270, 1370, 2390, 2470, 2590, Replaces Case OEM number A32413, (Item #: 153643) $2.60

Engine Gaskets

Conversion Gasket Set - For Case tractor models 400 (s/n 8253500-earlier), 730 (s/n 8253500-later), 740 (s/n 8253500-later), 830 (s/n 8253500-later), 840 (s/n 8253500-earlier), Compatible with Case Combine (s) 800, 1010, 1060, Compatible with Case Construction and industrial models W7, W9A, 680CK, Compatible with Case Engine (s) G251, G284, Includes crank seals, Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set, (Item #: 106149) $327.15

Conversion Gasket Set - For Case tractor models 400 (s/n 8253500-earlier), 730 (s/n 8253500-earlier), 740 (s/n 8253500-earlier), 830 (s/n 8253500-earlier), 840 (s/n 8253500-earlier), Compatible with Case Combine (s) 800, 1010, 1060, Compatible with Case Construction and industrial models W7, W9A, 680B (s/n 9103966-earlier), 680CK, 750 (s/n 7070350-later), 850 (s/n 7073468-earlier), Compatible with Case Engine (s) D267 (standard transmission), D301 (standard transmission), Includes crank seals, Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set, (Item #: 106150) $117.00

No
Picture
Engine Overhaul Gasket Set - For tractor models 400, 700, 730, 740 and 800B. Overhaul set equipped with Std. clutch and A267 or A267D diesel engines. NOTE: If ordering for a Case 800B, also order 2 of A9235 head gasket. (Item #: 183865, Ref: FS6735) $470.00

Front Crankshaft Seal - This front crankshaft oil seal has a 2.625 inch Inside Diameter, a 3.628 inch Outside Diameter and is .433 inch wide. Replaces: A157044, A23433, A24715, A27838, A40349, A57342, A62049, O3866AB, O8583AB, O9708AB, T34263 (Item #: 106145, Ref: A57342) $9.60

Head Gasket - For Case tractor models 730, 830, 930, Replaces Case OEM number A23118, 1349383C1, (Item #: 111796) $53.00

Head Gasket Set - For Case tractor models 730 (Draft-O-Matic, s/n 8253500-later), 740 (Draft-O-Matic, s/n 8253500-later), Compatible with Case Combine (s) 800, Compatible with Case Construction and industrial models 680CK, Compatible with Case Engine (s) G251, Replaces Case OEM number A189525, A40899, A40341, Contains all gaskets necessary to replace the cylinder head (valve seals not included), (Item #: 106154) $166.00

Head Gasket Set - For tractor models Case 400 Super, 730, 740 Diesel, Case Industrial 680 Diesel, Case Industrial 680B Diesel, Case Industrial 750 Diesel all with A267D Diesel Engine. This gasket set does not fit applications for the A267D outside of those listed. (Item #: 106155, Ref: HS3273Y) $106.00

Oil Pan Gasket - For Case tractor models 400, 420, 700, 730 (s/n 8253500-earlier), 740 (s/n 8253500-later), 800, 830 (s/n 8253500-later), 840 (s/n 8253500-earlier), Compatible with Case Combine (s) 800, 1010, 1060, Compatible with Case Construction and industrial models W7, W9 (s/n 8150185-earlier), W9A, 425, 680B (s/n 9103966-earlier), 680CK, 750 (s/n 7070350-later), 850 (s/n 7073468-earlier), Compatible with Case Engine (s) D267, D301, G251, G284, Replaces Case OEM number A7616, Oil Pan Gasket Only, (Item #: 106167) $19.80

Oil Pan Gasket - For Case tractor models 400, 730, 740, 830, 840 (all gas and diesel with Case-O-Matic transmission), Replaces Case OEM number A189510, Engines: A267D, A301D, 215, (Item #: 107096) $28.50

Oil Pan Gasket Set - For Case tractor models 400, 730, 740, 830, 840 (gas and diesel using CK Draft-O-Matic transmission), Replaces Case OEM number A189516, Engines: A267D, A301D, 251, (Item #: 107097) $315.00

Rear Crankshaft Seal - For Case tractor models 730 (s/n 8253500-earlier), 740 (s/n 8253500-later), 770, 830 (s/n 8253500-earlier), 840 (s/n 8253500-earlier), 870, 930 (s/n 82583382-later), 970, 1030, 1070, 1090, 1170, 1175, 1200, 1270, 1370, 1470, 1570, 2090, 2094, 2290 (engine s/n 10339530-later), 2294, 2390 (engine s/n 10339530-later), 2394, 2470, 2590 (engine s/n 10338578-later), 2594, 2670, 3294, 4490 (engine s/n 10338516-later), 4494, 4690, 4694, Compatible with Case Combine (s) 1010, 1060, Compatible with Case Construction and industrial models W7, W7E, W8B, W8C, W8E, W9A, W9B, W9C, W9E, W10 (s/n 8229366-earlier), W10B, W10C, W10E, W12, W14 (engine s/n 2571280-later), W14FL (s/n 9119671-later), W14H (s/n 9119671-later), W18, W18B, W20, W20B, W20C, W24, W24B (engine s/n 2572010-earlier), W24C, W26B, W30, W36, 35B, 40D, 40E, 50E, 300C, 400C, 475 (s/n 3058168-earlier), 600, 680B, 680C, 680CK, 680E, 680G, 680H, 750, 780B, 780CK, 800, 850 (s/n 7073468-later), 850B, 850C, 855C, 880, 880B, 880C, 980, 980B, 1080, 1080B, 1150 (s/n 7110299-later), 1150B, 1150C, 1150D, 1155D, 1280, 1280B, 1450, 1450B (engine s/n 10335336-later), 1455B (engine s/n 10335336-later), Compatible with Case Engine (s) D267, D301, D401, D451, G251, G284, 267BD, 301BD, 336BD, 336BDT, 401BD, 401BDT, 451BD, 451BDT, 504BD, 504BDT, 504BDTI Replaces Case OEM number A62050, A23085, A62700, , Compatible with Case IH tractor models 3394, 3594, (Item #: 106147) $29.30

Rear Crankshaft Wear Sleeve - For Case tractor models 730 (s/n 8253500-earlier), 740 (s/n 8253500-later), 770, 830 (s/n 8253500-earlier), 840 (s/n 8253500-earlier), 870, 930 (s/n 82583382-later), 970, 1030, 1070, 1090, 1170, 1175, 1200, 1270, 1370, 1470, 1570, 2090, 2094, 2290 (engine s/n 10339530-later), 2294, 2390 (engine s/n 10339530-later), 2394, 2470, 2590 (engine s/n 10338578-later), 2594, 2670, 3294, 4490 (engine s/n 10338516-later), 4494, 4690, 4694, Compatible with Case Combine (s) 1010, 1060, (Item #: 106148) $147.00

Engine Rebuild Kits

Cylinder Kit - 4.250" Overbore - For Case tractor models 400 (Super), 700, 730 (s/n 8253500-earlier), 800, 930 (s/n 8258382-earlier), Compatible with Case Combine (s) 800, Compatible with Case Construction and industrial models W9 (s/n 8150185-earlier), W10 (s/n 8229366-earlier), Compatible with Case Engine (s) D267, D401, Replaces Case OEM number 226-1339, Standard Bore: 4.125", Overbore: 4.250", Piston Pin Diameter: 1.358", Flat Top Piston, Sold per cylinder, Kit Includes: Liner, liner o-rings, piston, piston rings, pin and retainers, (Item #: 128592) $230.00

Engine Rebuild Kit - Less Bearings, D267 - For Case tractor models 400 (Super), 730, 740, Compatible with Case Engine (s) D267, Flat top piston, 1.358" piston pin diameter, Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For .156" Thrust Washer Set use Item #: 106127, (Item #: 130546) $1419.01

Engine Parts

No
Picture
Bare Block, Remanufactured, A23440 - For Case tractor model 730, Replaces Case Casting number A23440, Our remanufactured bare blocks have been; cleaned, inspected, align bored, and pressure checked, (Item #: 204027) $1100.01

Connecting Rod Bolt - For Case tractor models 400 (Super), 730, 770, 830, 840, 870, 930, 940, 970, 1030, 1090, 1170, 1175, 1200, 1270, 1370, 1470, 1570, 2090, 2094, 2290, 2294, 2390, 2394, 2470, 2590, 2594, 2670, 3294, 4490, 4494, 4690, 4694, Compatible with Case Construction and industrial models W7, W8, W9, W10, W12, W14, W18, W18B, W20, W24C, W26, W30, W36, 40, 45, 50, 680, 680CK, 680E, 680G, 680H, 750K, 780B, 850, 980, 1080, 1150, 1155D, 1280, 1285, 1450, Replaces Case OEM number A65757, (Item #: 128644) $10.60

Connecting Rod, Used - For Case tractor models 730, 830, 930, Compatible with Case Combine(s) 1060, Compatible with Case Construction and industrial models W7, W8B, W8C, W9B (s/n 8208732-9808999), W9C (s/n 9809000-9811800), W10 (s/n 8229367-earlier), W10B (s/n 8208732-9808999), W10C (s/n 9809000-9811800), 680CK (s/n 9101501-9102281), Replaces Case OEM nos A28657, Replaces Casting nos A27845, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498670) $55.01

No
Picture
Crankshaft - For Case tractor models 680CK, 730, 830, 850, Replaces Case IH OEM number A22578, A166001, 010700, 966772, Compatible with Case tractor models 750, No gear, small main, bolt-on style center gear not included, (Item #: 185375) $847.00

Crankshaft, Remanufactured, A22578 - For Case tractor models 730, 770, 830, 870, Compatible with Case Engine (s) D301, Replaces Casting number A22578, 966772, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., Our remanufactured crankshaft does not include balancer drive gear, Additional Handling and Oversize Fees Apply To This Item, (Item #: 200122) $710.01

No
Picture
Cylinder Head, Remanufactured, A20957 - For Case tractor models 730 (Eagle Hitch), 930 (Chain Drive Diesel), Replaces Case Casting number A20957, Engine 251, 401, 4 or 6 Cylinders, Diesel, Casting No. A20957 (with decompression), Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200081) $900.01

No
Picture
Cylinder Head, Remanufactured, A21356 - For Case tractor models 730 (Eagle Hitch), 930 (Chain Drive), Replaces Case Casting number A21356, Casting No. A21356, Engine 251, 371, Cylinders: 6, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205474) $770.01

No
Picture
Cylinder Head, Remanufactured, A21357 - For Case tractor models 730 (Eagle Hitch), 930 (Chain Drive), Replaces Case Casting number A21357, A24543, Not a Welded Head, Engine 251, 371, 6 Cylinders, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200080) $550.01

No
Picture
Cylinder Head, Remanufactured, A21636 - For Case tractor models 730 (Eagle Hitch), 930 (Chain Drive), Replaces Case Casting number A21636, Casting No. A21636, Engines 251, 371, Cylinders: 6, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205475) $740.01

No
Picture
Cylinder Head, Remanufactured, A33613 - For Case tractor models 730 (DOM), 731 (Eagle Hitch), 930 (DOM Diesel), Replaces Case Casting number A33613, Replaces Case Casting number A33613 (without decompression), Engine 251, 401, 4 or 6 Cylinders, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200082) $810.01

Cylinder Head, Used - For Case tractor models 730 (Eagle Hitch), 930 (Chain Drive), Replaces Case Casting number A21357, A24543, Engine(s): 251, 371, Cylinders: 6, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200080, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400080) $176.01

Exhaust Valve - For Case tractor models 400, 420, 600, 700, 730, 740, 800, 900, 930, 940, Compatible with Case Combine (s) 800, Compatible with Case Construction and industrial models W8B, W8C, W9, W9B, W9C, W10B, W10C, 425, 680CK, Replaces Case OEM number A33423, A33456, A21711, 1.545" Head Diameter, Length: 6.540", (Item #: 128712) $33.20

Intake Valve - For Case tractor models 730, 930, 940, 1150, Compatible with Case Construction and industrial models W8, W9, W10, 680, Replaces Case OEM number A11801, (Item #: 128710) $21.20

Piston Pin Bushing - For Case tractor models 400, 420, 500, 600, 700, 730, 740, 770, 800, 830, 840, 870, 900, 920, 930, Compatible with Case Combine (s) 800, 1010, 1060, Compatible with Case Construction and industrial models W7, W7E, W8B, W8C, W8E, W9, W9A, W9B, W9C, W9E, W10, W10B, W10C, W10E, 680CK, Compatible with Case Engine (s) D267, D401, G251, G284, G301, G377, Replaces Case OEM number A27846, 1.358" pin, (Item #: 108142) $47.30

Rear Oil Seal Retainer Plate, Used - For Case tractor models 730, 770, 830, 870, 930 (s/n 8258382-later), 970, 1030, 1070, 1175, 1200 (s/n 9806101-later), 1270, 1370, 1470, 2090, 2094, 2290, 2294, 2390, 2394, 2470, 2590, 2594, 2670, 3294, 4490, 4690, Compatible with Case Combine(s) 1060 Replaces Case OEM nos A57457, A32182, , Compatible with Case IH tractor models 3394, 3594, 4494, 4694, Replaces Case IH OEM nos A57457, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438353) $89.01

Ring Gear - 1030, 1200, 1200TK, 1470, 1896, 2090, 2094, 2096, 2290, 2294, 2390, 2394, 2470, 2590, 2594, 2670, 3294, 3394, 3594, 4490, 4694, 730, 830, 830, 930CK. Starter Ring Gear is 17.3 inches O.D., 15.88 inches I.D. and.875 inches wide, 137 tooth. Replaces A27920, J90503, J905031 (Item #: 103883, Ref: A27920) $83.00

Thrust Washer Set - .156" Thickness - For Case tractor models 400 (Super), 730, 770, 830, 840, 900, 930, 940, 970, 1030, 1175, 1200, 1270, 2090, 2094, 2290, 2294, Replaces Case OEM number A27835, A62572, Thickness: .156", (Item #: 106141) $57.00

Thrust Washer Set - .186" Thickness - For Case tractor models 400 (Super), 730, 770, 830, 840, 900, 930, 940, 970, 1030, 1175, 1200, 1270, 2090, 2094, 2290, 2294, Replaces Case OEM number A62573, Thickness: .186", (Item #: 106140) $51.00

Valve Guide - For Case tractor models 400 (Super), 500, 600, 730, 830, 840, 900, 920, 930, 940, 1030, 1200, Compatible with Case Combine (s) 800, 1010, 1060, Compatible with Case Construction and industrial models W7, W8B, W8C, W9, W9A, W9B, W9C, W10, W10B, W10C, W12, 420, 425, 680B, 680CK, 750, 850, 1150, Replaces Case OEM number 6321A, Replaces OEM number A21671, A26294, VG829, Intake, (Item #: 128709) $9.40

Valve Guide - For Case tractor models 730, 740, 770, 830, 840, 870, 930, 940, 970, 1030, 1070, 1090, 1170, 1175, 1200, 1270, 1370, 1470, 1570, 2090, 2094, 2290, 2294, 2390, 2394, 2470, 2590, 2594, 2670, 3294, 4490, 4494, 4690, 4694, Compatible with Case Construction and industrial models W7, W7C, W7E, W8, W8B, W8C, W8E, W9, W9B, W9C, W9E, W10, W10B, W10C, W10E, W12, W14, W18, W18B, W20, W20B, W20C, W24B, W24C, W26, W26B, W30, W36, 35D, 40, 40D, 40E, 45, 45B, 50, 50D, 50E, 475, 680, 680B, 680C, 680E, 680G, 680H, 750, 780B, 850, 850B, 850C, 855C, 880, 880B, 880C, 880R, 980, 980B, 1080, 1080B, 1150, 1150B, 1150C, 1150D, 1155D, 1280, 1280B, 1285, 1450, 1450B, Compatible with Case Engine (s) 267BD, 301BD, 336BD, 336BDT, 401BD, 451BD, 451BDT, 504BD, 504BDT, 504BDTI, Replaces Case OEM number A41783, A41781, A21674, A11803, Exhaust, (Item #: 128713) $6.20

Valve Keeper - For Case tractor models 400 (Super, s/n 8106131-later), 730, 740, 830, 840, 870, 930, 940, 970, 1030, 1070, 1090, 1170, 1175, 1200, 1270, 1370, 1470, 1570, 2090, 2094, 2290, 2294, 2390, 2394, 2470, 2590, 2594, 2670, 3294, 4490, 4494, 4690, 4694, Compatible with Case Combine (s) 1060, Compatible with Case Construction and industrial models W7, W7C, W7E, W8B, W8C, W8E, W9A, W9B, W9C, W9E, W10B, W10C, W10E, W12, W14, W18, W18B, W20, W20B, W20C, W24, W24B, W24C, W26B, W30, W36, 35D, 40, 40D, 40E, 45, 45B, 50D, 50E, 475, 680, 680B, 680C, 680E, 680G, 680H, 750 (s/n 7070351-earlier), 780, 780B, 850 (s/n 7073469-earlier), 850B, 850C, 855C, 880, 880B, 880C, 880R, 980, 980B, 1080, 1080B, 1150, 1150B, 1150C, 1150D, 1155D, 1280, 1280B, 1285, 1450, 1450B, Compatible with Case Engine (s) D267, D267B, D301, D301B, D401, D451, 336BD, 336BDT, 451BD, 451BDT, 504BD, 504BDT, 504BDTI, Replaces Case OEM number A27872, Sold per 1/2 valve, order 2 per valve, (Item #: 128514) $3.60

Valve Lifter - For Case tractor models 730 (s/n 8253500-earlier), 740 (Draft-O-Matic, s/n 8253500-later), 770, 830 (Draft-O-Matic, s/n 8253500-later), 840 (Case-O-Matic, s/n 8253500-earlier), 870, 930 (s/n 8258382-later), 970, 1030, 1070, 1090, 1170, 1175, 1200, 1270, 1370 (late or upgraded), 1470 (late or upgraded), 1570, 2090, 2094, 2290 (engine s/n 10339530-later), 2294, 2390 (engine s/n 10339530-earlier), 2394, 2470 (late or upgraded), 2590 (engine s/n 10338578-earlier), 2594, 2670 (late or upgraded), 3294, 4490 (engine s/n 10338516-earlier), 4494, 4690, 4694, Compatible with Case Combine (s) 800, 1010, 1060, Compatible with Case Construction and industrial models W7, W7E, W8B, W8C, W8E, W9A, W9B, W9C, W9E, W10 (s/n 8229366-earlier), W10B, W10C, W10E, W12, W14 (engine s/n 2571280-later), W14FL (s/n 9119671-later), W14H (s/n 9119671-later), W18, W18B, W20, W20B, W20C, W24 (early), W24B (engine s/n 2572010-later), W24C (early), W26B, W30, W36 (s/n 17753999-earlier), 35B (with turbo), 40D, 40E, 50E, 300C (late), 400C (late), 475 (s/n 3058168-later), 600 (late), 680B (s/n 9103966-earlier), 680C, 680CK, 680E (early), 680G (early), 680H, 750 (s/n 7070350-later), 780B (late with engine balancer), 780CK (early with turbo), 800 (early), 850 (s/n 7073468-earlier), 850B (early), 850C, 855C, 880 (early), 880B (early), 880C, 980, 980B, 1080, 1080B, 1150 (s/n 7110299-earlier), 1150B, 1150C, 1150D, 1155D, 1280, 1280B, 1450 (late), 1450B (engine s/n 10335336-earlier), 1455B (engine s/n 10335336-earlier), Compatible with Case Engine (s) D267, D267B, D301, D401, D451, G251, G284, G301, G377, 301BD, 336BD, 336BDT, 401BD, 401BDT, 451BD, 451BDT, 504BD, 504BDT, 504BDTI, Replaces Case OEM number A182179, A21857, Sold individually, (Item #: 160901) $22.80

Valve Rotator - For Case tractor models 420, 600, 700, 730, 740, 770, 800, 830, 840, 870, 900, 930, 970, 1030, 1070, 1090, 1170, 1175, 1200, 1270, 1370, 1470, 1570, 2090, 2094, 2290, 2294, 2390, 2394, 2470, 2590, 2670, 3294, 4490, 4494, 4690, 4694, Compatible with Case Combine (s) 800, 1010, 1060, Compatible with Case Construction and industrial models W7, W7E, W8B, W8C, W8E, W9, W9A, W9B, W9C, W9E, W10, W10B, W10C, W10E, W12, W14, W14FL, W14H, W18, W18B, W20, W20B, W20C, W24, W24B, W24C, W26B, W30, W36, 35B, 40D, 40E, 50E, 300C, 400C, 600, 680B, 680C, 680CK, 680E, 680G, 680H, 750, 780B, 780CK, 850, 850B, 850C, 855C, 880, 880B, 880C, 980, 980B, 1080, 1080B, 1150, 1150B, 1150C, 1150D, 1155D, 1280, 1280B, 1450, 1450B, 1455B, Compatible with Case Engine (s) 301BD, 336BD, 336BDT, 451BDT, 504BD, 504BDT Replaces Case OEM number A23061, A66336, A44658, A24993, O10735AB, O21687, , Compatible with Case IH tractor models 2594, (Item #: 168538) $19.00

Valve Spring - For Case tractor models 400 (Super), 730, 830, 840, 930, 940, 1030, 1200, Compatible with Case Construction and industrial models W7, W8, W9, W10, W12, 680, 850 (s/n 7073470-earlier), 1150 (s/n 7110300-earlier), Replaces Case OEM number A21076, (Item #: 128674) $8.90

Valve Train Kit - For Case tractor models 400 (Super), 730, Compatible with Case Construction and industrial models 680, (Item #: 120237) $330.00

Engine Pistons and Sleeves

No
Picture
Piston and Sleeve Kit, Overbore - Sleeve and piston kit, overbore from 4-1/8" to 4-1/4", complete for 4 cylinders. Contains sleeves, pistons, rings, pins, and retainers. 1 kit used in A267D 4 cylinder diesel engine. 4 cylinder Case Super 400 diesel, 8106131/up, 700 diesel, 730 diesel, 740 diesel, 800B diesel engine A267D. (Item #: PK253) $761.93

No
Picture
Sleeve and Piston Kit - This sleeve and piston kits is for 4 1/4 Overbore with 1.358 Pin Diameter. Includes sleeve, pistons, piston rings, piston pins and piston pin retainers. For 400 Super, 680CK, 700, 730, 740, 800 with A267D Diesel Engine (Item #: R3322) $678.56

Engine Rings

No
Picture
Piston Ring Set, 4 Inch Bore - 12 compression rings 3/32 inch, 4 oil rings 1/4 inch. For tractor models C, CC, CI, CO, D, DC, DI, DO, 400, 420, 680CK, 700, 730, 740, 770, 800, 810. Not for use with chrome sleeve liners. (Item #: 130066, Ref: 1486638) $138.00

No
Picture
Piston Ring Set - Standard - 4 Cylinder Set - For Case tractor models 400, 700, 730, 800, 830, 840, 930, Compatible with Case Combine (s) 800, 1010, 1060, Compatible with Case Construction and industrial models W7, W9, W9A, W10, Compatible with Case Engine (s) D267, D401, G284, Bore: 4.250", Ring Size: Standard, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold as complete 4 cylinder set, (Item #: 174188) $110.00

Piston Ring Set - Standard - Single Cylinder - For Case tractor models 400, 700, 730, 800, 830, 840, 930, Compatible with Case Combine (s) 800, 1010, 1060, Compatible with Case Construction and industrial models W7, W9, W9A, W10, Compatible with Case Engine (s) D267, D401, G284, Bore: 4.250", Ring Size: Standard, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For 4 Cylinder Piston Ring Set use Item #: 174188, (Item #: 120710) $33.70

Piston Ring Set - Standard - Single Cylinder - For Case tractor models 400, 500, 600, 700, 730, 740, 770, 800, 900, 920, 930, 970, Compatible with Case Combine (s) 800, Compatible with Case Construction and industrial models W8B, W8C, W8E, W9, W9B, W9C, W9E, W10B, W10C, W10E, 420, 425, 680CK, Compatible with Case Engine (s) D251, D377, G251, G260, G377, Replaces Case OEM number A46308, Bore: 4.000", Ring Size: Standard, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For 6 Cylinder Piston Ring Set use Item #: 174201, (Item #: 120737) $28.30

Exhaust System

Exhaust Manifold Ferrule - This is a tapered Exhaust Manifold Ferrule. It tapers from 1.885 inches to 1.752 inches outside diameter, 1.625 to 1.743 inches inside diameter. It is 0.493 inches wide. Used on (730, 740, 741, 742, 743, 744 gas, 4 used), (930 Early, gas, up to Engine SN: 2142562 (1964) with center exhaust, 6 used) 680; Replaces: A21635 (Item #: 167999, Ref: A21635) $14.40

Exhaust Manifold Gasket - This Exhaust Manifold Gasket measures 2.506 inches outside diameter, 1.786 inches inside diameter and is 0.085 inches thick. It fits: (L, LA, LAH, LAI, LAIH, LAIM, LI all gas, distillate, 2 used for INTAKE only), (Super 400, 400, 401, 402, 403, 405, 410, 411, 412, 413, 414, 415, 425 all gas, LP, diesel, 4 used), (500, 520 both diesel, 6 used), (610, 620 both LP, diesel; 6 used), (700, 710, 710B, 711, 712, 712B, 713, 713B, 715, 715B, 725B, 730, 740, 741, 742, 743, 744, 810, 810B, 811, 811B, 812, 812B, 813, 813B, 815 gas, 4 used), (900, 900B, 910, 910B, 920B gas, LP, diesel; 6 used), (930 Early 1960 - 64, gas with center exhaust, 6 used), (940, 941 1960 - 64, gas with center exhaust, 6 used)], (711B gas, 4 used), (420 gas, LP, diesel. 4 used), (600 LP, diesel; 6 used), (800 gas, 4 used), 680CK, (W9 gas, 4 used). Replaces: 1349071C1, A27909, O1437AB, O9815AB (Item #: 180167, Ref: A27909) $6.70

Intake Manifold Gasket - Fits: (400, 410, 411, 412, 413, 414, 415, 700, 710, 710B, 711, 711B, 712, 712B, 713, 713B, 715, 715B, 725B, 730, 740, 741, 742, 743, 744, 810, 810B, 811, 811B, 812, 812B, 813, 813B, 815, 815B (gas, LP; 2 used)), (610, 900, 910 (LP, 3 used)), 930 (Early, 1960 - 64, gas, LP with center exhaust, 3 used), (940, 941 (1960 - 64, gas, LP with center exhaust, 3 used)); Case Industrial - Fits: 600 Skidder (LP, 3 used), 800 Skidder (gas, LP; 2 used), (680CK, W9 (gas, 2 used)) Replaces: 1349068C1, A7363 (Item #: 185141, Ref: A7363) $6.57

Manifold - Gas Exhaust manifold For Fits: 700, 710, 710B, 711, 711B, 712, 712B, 713, 713B, 715, 715B, 725B, 800, 810, 810B, 811, 811B, 812, 812B, 813, 813B, 815, 815B, 730, 730CK, 730 Comfort King, 730 Draft-O-Matic, 740, 741, 742, 743, 744, 830, 830 Comfort King, 830 Draft-O-Matic, 840, 841, 842, 843; Replaces original part numbers A11250 and A20867. NOTE: The outlet outside diameter is 2-1/2". Many tractors on this list have an original 2-1/4" outlet manifold. You may need to change muffler if the outlet is different than the manifold you are replacing. If new Ferrules are needed, see part numbers A11837 and A21635. If Gaskets are needed, see part numbers A11889 and A27909 (Item #: 101505, Ref: R4068) $353.87

Manifold Gasket - This Manifold Gasket measures 2.642 inches outside diameter, 1.917 inches inside diameter and is 0.110 inches thick. Used on: (W10A diesel, 6 used), (700, 701, 701B, 702, 702B, 703, 703B, 800, 800B, 801, 801B, 802, 802B, 803, 803B used as an exhaust gasket, diesel, only 4 used), (730, 730CK, 731, 732, 733, 734 used as an intake or exhaust gasket, diesel, 2 used for intake, 4 used for exhaust), (830, 830 Comfort King, 840, 841, 842, 843 gas, LP; only 4 used), (930, 931 diesel, 1960 - 64 using early center exhaust style manifold, 6 used), Industrial: (1150 up to SN: 7110299, 6 used), (680B, 680CK, 750, W9 diesel, 4 used), (W10, W10B, W10C, W8B, W8C, W9B, W9C all diesel, 6 used), (W7, W9A gas, 4 used). Replaces: 1349070C1, A11889 (Item #: 183384, Ref: A11889) $6.20

Muffler - Vertical Exhaust Inlet inside 2 1/2 inch, outlet outside diameter 2 1/2 inch, overall length 26 inches. For 730, 740, 830, 840 Gas and Diesel. OEM number use MC212 clamp, use R1802 rain cap. (Item #: 100272, Ref: R1054) $60.54

Muffler, Vertical - Round body. Inlet 2-1/2" I.D, outlet 2-1/2" O.D, 29" overall length. For tractor models 530, 630, 640, 641, 730, 730C, 830. (Item #: 100271, Ref: A24314) $57.00

Fuel System / Air Intake

Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For the following 430 diesel, 530, 730, 930, 470 diesel, 570, 770, 830, 870, 1030CK, 1031, 1032, 580B, 431 diesel, 531, 631, 632, 740, 741, 742, 744, 840, 841. Can replace Donaldson P02-0227, also replaces 101965A, 10P871, 1125804, 1508881M1, 3119347, 365413R1, 71125804, 73186, 73533, 80073533, C0NN9A663A, F3446R, L60631, R28794 (Item #: 157279, Ref: R28794) $8.80

Air Cleaner Cap - For tractor models 730, 830, 530CK, 580CK. Air Cleaner Cap is 2 1/4" I.D. (Item #: 126367, Ref: A21430) $53.00

Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On Case it is used For: [V, VA, VAC, VAI, VAIW, VAO, VAO-15, VAS, VC, VI, VO, 200B, 210B, 211B, 300B, 301B, 310B, 311, 311B, 312, 312B, 320B, 350, 351, 400B, 410B, 411B, 420B, 430, 440, 441, 445, 470, 530, 540, 541, 545, 570, 600B, 610B, 611B, 614B, 630, 632, 634, 640, 641, 642, 644, 730, 740, 741, 742, 743, 744, 830, 840, 841, 842, 843 (For choke cable bracket with Marvel Schebler carb # TSX42, TSX43, TSX74, TSX114, TSX212, TSX225, TSX253, TSX409, TSX474, TSX635, TSX710, TSX717, TSX749, TSX762, TSX785, TSX794, TSX798, TSX799, TSX804, TSX854, TSX936, TSX957SL, TSXU838) ], [310, 310B, 310C, 310D, 310E, 310F, 310G, 680CK, W5, W7, W9A (For choke cable bracket) ], Industrial; Skid steer: 1737 (For choke cable bracket); Replaces: 29-81, B51765 (Item #: 126116, Ref: CT29-81) $5.10

Carburetor Float - Zenith Carburetor Float Use w/ Zenith Carburetors: 11535, 11537, 11580, 11588, 11705, 11973, 12032, 12066, 12217, 12232, 12590, 12293, 12427, 12471, 12509, 12534, 12548, 12685, 12758, 12902, 12913, 12994, 13048, 13106, 13107, 13108, 13109, 13151, 13153, 13154, 13161, 13294, 13304, 13316, 13318, 13328, 13338, 13337, 13338, 13372, 13374, 13378, 13384, 13390, 13406, 13416, 13465, 13546, 13578, 13588, 13596, 13608, 13612, 13628, 13716, 13758, 13783, 13795, 13808, 13875, 13881, 13912, 13913, 13914, 13915, 13916, 13917, 13920, 13956, 14991, 14992, 14995, 14996, 14997, 14999. Replaces E1NN9550AA, 1508089M91, B51359, 70227103, 381027R1, 1K7630. (Item #: 108448, Ref: R4531) $24.40

Carburetor Float - Use with Marvel Schebler Carbs: TSX11, TSX616, TSX749, TSX780, TSX782, TSX785, TSX794, TSX863 For MODELS: D Series, 400, 410B, 511B, 730, 740, 840 (Item #: 108451, Ref: R4012) $31.70

Carburetor Kit, Basic - Kit for Marvel TSX616, TSX780, TSX749, TSX782, TSX794, TSX785, TSX863, TSX11 carbs used on 400, 410B, 511B, 6799, 8714, 730, 740, 840, D, DC, DC-3, DC-4, DH, DI, DO, DS, DV, L, LA, LA1, LA1H, LAD, LAE. (Item #: 100735, Ref: MS103) $23.50

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX785. For the following tractor models: 730, 740, 830, 840. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203250, Ref: 1228-CARB) $324.01

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX863. For the following tractor models: 730, 740, 830, 840. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203251, Ref: 1229-CARB) $550.01

Fuel Cap - For models 1200, 1470, 530, 630, 730, 780, 830, 930, W12, W5A, W7, W9A. Includes gasket, 3.475 inch outside diameter, 2.505 inch tang to tang. Replaces A22451, A33558. (Item #: 124142, Ref: 70262788) $25.00

Fuel Sending Unit - For Case tractor models 570, 730, 830, Replaces Case OEM number A23480, (Item #: 119726) $69.00

Fuel Tank Cap - For Case tractor models 530 (Gas s/n 8248494-earlier), 630, 730, 830, 930, 1200, 1470, Compatible with Case Construction and industrial models W5, W7, W12, 780B, 780C, 780D, Replaces Case OEM number A22451, A11430, A33558, Vented through the top, Includes gasket, Center Inside Diameter: 2.20", Outside Diameter: 3.47", Tab to Tab: 2.5", (Item #: 122232) $30.00

No
Picture
Injection Line #1 - For tractor models 1030 with 451, 700 with 267, 730 with 267, 800 with 267, 830 with 301, 900 with 377 prior to SN# 8141036, 930 with 401 1960-1962, 930CK with 401 1962-1964, 940 with 401 1960-1962. (Item #: 162776, Ref: A20501) $44.00

No
Picture
Injection Line #2 - For tractor models 1030 with 451, 700 with 267, 730 with 267, 800 with 267, 830 with 301, 900 with 377 prior to SN# 8141036, 930 with 401 1960-1962, 930CK with 401 1962-1964, 940 with 401 1960-1962. (Item #: 162777, Ref: A20502) $47.60

No
Picture
Injection Line #3 - For tractor models 1030 with 451, 700 with 267, 730 with 267, 800 with 267, 830 with 301, 900 with 377 prior to SN# 8141036, 930 with 401 1960-1962, 930CK with 401 1962-1964, 940 with 401 1960-1962. (Item #: 162778, Ref: A20503) $37.10

No
Picture
Injection Line #4 - For tractor models 1030 with 451, 700 with 267, 730 with 267, 800 with 267, 830 with 301, 900 with 377 prior to SN# 8141036, 930 with 401 1960-1962, 930CK with 401 1962-1964, 940 with 401 1960-1962. (Item #: 162779, Ref: A20504) $43.80

No
Picture
Injection Line #5 - For tractor models 1030 with 451, 700 with 267, 730 with 267, 800 with 267, 830 with 301, 900 with 377 prior to SN# 8141036, 930 with 401 1960-1962, 930CK with 401 1962-1964, 940 with 401 1960-1962. (Item #: 162780, Ref: A20505) $30.60

No
Picture
Injection Line #6 - For tractor models 1030 with 451, 700 with 267, 730 with 267, 800 with 267, 830 with 301, 900 with 377 prior to SN# 8141036, 930 with 401 1960-1962, 930CK with 401 1962-1964, 940 with 401 1960-1962. (Item #: 162782, Ref: A20506) $43.60

Sediment Bowl Assembly - Large Bowl. 1/8 inch pipe thread to fuel line, 3/8 pipe to tank. Fuel Strainer assembly with 2.25 inch bowl. For the following models using the large bowl: CC, CI, CO, L, LA, LAI, LI, R, RC, 400, 700, 730, 740, 741, 742, 744, 830, 840, 841. Replacement bowl available as part S.65504. Replaces A22615 and O1933AB. (Item #: 105393, Ref: S.61581) $22.00

Sediment Bowl Assembly Glass Bowl - Glass bowl with an outside diameter is 2 1/8 and an overall height of 2 3/8. For the following gas models using a 2 3/8 inch tall glass bowl: C, CC, CI, CO, L (gas only), LA (gas only, up to sn:4600027), LAI (gas only, up to sn:4600027), LI (gas only), R, RC, 400, 700, 730, 741, 742, 744, 830, 840. Replaces A10456, A11204, 357957R1. (Item #: 105365, Ref: S.65504) $5.50

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: A11211, T7040 (Item #: 105364, Ref: 49923D) $3.50

Hitch / Drawbar

No
Picture
Drawbar Bracket - For 730, 830, 930, 1030 for these models without Three Point Hitch. (Item #: 173063, Ref: A57201) $158.00

Eagle Hitch, Latch - Category I. For tractor models 200B, 300, 300B, 400B, 500B, 600B, 700, 800, 310, 310C, 320, 320B, 420, 420B, 420BD, 420 (DOZERS, 425, 430, 630, 730, 830). Replaces 6167A. (Item #: 126347, Ref: A26240) $48.10

Eagle Hitch Lock, LH - Category I. For tractor models 200B, 300, 300B, 400B, 500B, 600B, 700, 800, 310, 310C, 320, 320B, 420, 420B, 420BD, 420 (DOZERS, 425, 430, 630, 730, 830). Replaces 6169A. (Item #: 126348, Ref: A26242) $34.10

Eagle Hitch Lock, RH - Category I. For tractor models 200B, 300, 300B, 400B, 500B, 600B, 700, 800, 310, 310C, 320, 320B, 420, 420B, 420BD, 420 (DOZERS, 425, 430, 630, 730, 830). Replaces 6168A. (Item #: 126349, Ref: A26241) $37.90

Top Link Turnbuckle - For Case tractor models 730, 770, 830, 930, 970, 1030, 1070, 2090, 2094, 2290, 2294, Replaces Case OEM number A163820, A67344, A62386, A62787, A61889, A57498, (Item #: 170304) $72.94

Hydraulic System

Pump Drive Coupling, Used - For Case tractor models 730 (s/n 8253501-later), 730CK (s/n 8253501-later), 770, 830 (s/n 8253501-later), 830CK (s/n 8253501-later), 870, 930, 930CK, 970, 1030, 1030CK, 1070, 1090, 1170, 1175, Replaces Case OEM nos A32097, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431318) $41.01

Lights

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: 4410, A42294, A43639, A47179, D33182, L30464 (Item #: 111242, Ref: 28A116) $12.90

No
Picture
Dash Light, 12 Volt - For tractor models (1030 from 1966-1969), (530 from SN# 8262800-8650135), (570 from 8656925 and up), 730, 830, 930, 580B, 584, 585, 586, 580.A24087 (Item #: 109930, Ref: AR20432R) $35.30

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $35.00

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, A24572, A40855, A42295, D71409, E98744, K962145. (Item #: 111241, Ref: 373662R91) $9.10

Light Ring - The dimensions of this light ring with screw are 4.5 inches in height and 0.885 inches in width. Replaces 10P1552, 230233, 371445R91, 371449R91, 371451R91, 70230233, AF3891R, B50255, B50258, JDS676. Verify measurements before ordering. Most models used more than one headlight style in production. (Item #: 154743, Ref: 371449R91) $25.70

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $18.50

$Case 730 Tail Light \ Dash Light Bulb - 12-Volt$
Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 to 12 Volts. Replaces: B50223 (Item #: 150699, Ref: TLBULB12V) $1.70

Oil System

No
Picture
Oil Filter - For tractor models 680CK, 730, 731, 800, 801, 802, 810, 830, 831, W7, W9. Replaces part numbers 122731, 3054750R91 and A21475. (Item #: 119300, Ref: CPN6731B) $17.80

PTO / Driveline

PTO Clutch Driven Plate - This PTO clutch driven plate is for models 1030, 1070, 1090, 1170, 1175, 1270, 1370, 2470, 2870, 300B, 430, 470, 530, 730, 830, 870, 930, 970. Replace part numbers A57170, A66365 and A65425. (Item #: 163381, Ref: A66365) $5.60

PTO Clutch Drive Plate - This PTO clutch drive plate measures 3.762 inches inside diameter, 5.268 inches outside diameter, has 24 teeth and is .077 inches thick. For tractor models 1030, 1070, 1175, 1270, 1370, 2470, 2670, 730, 830, 870, 930, 970. Replaces part number A66364, A59231, 1981246C1. (Item #: 150767, Ref: 1981246C1) $13.00

No
Picture
PTO Shaft - 540 RPM PTO Shaft For 730, 830, 930, 1030 With Single Speed PTO. 13.687 inches long, 33 spline. (Item #: 108899, Ref: A64592) $190.00

Seats

Seat Adjustment Handle - For the following Case tractors with an easy ride seat: 200, 200B, 210B, 211B, 210, 211, 300, 300B, 310B, 311, 311B, 312, 312B, 320, 320B, 350, 400B, 410B, 411B, 420B, 351, 430, 301B, 431, 441, 470, 480, 500B, 530, 531, 540, 541, 570, 600B, 610B, 611B, 614B, 630, 631, 632, 634, 640, 641, 642, 644, 700 (Orchard Only), 730 (Standard only with serial numbers 8253501 to 8312174). Replaces G45001, VT5502, VTA3341. (Item #: 105324, Ref: 1016119M91) $28.70

Seat Assembly - Black Vinyl. For tractor models 730, 830, 930, 1030 Comfort King, 770, 870, 970, 1070, 1090, 1170, 1175, 1270, 1370, 1470, 2470, 2670 Comfort King. (Item #: 178449, Ref: R1134) $672.00

No
Picture
Seat Assembly - Black Fabric For 730, 830, 930, 1030 Comfort King 770, 870, 970, 1070, 1090, 1170, 1175, 1270, 1370, 1470, 2470, 2670 Comfort King (Item #: 101281, Ref: R1135) $615.00

Seat Back - Black Vinyl on Steel For 430, 440, 470, 530, 540, 570, 580, 630, 730, 740, 830, 930, 940, 1030. Replaces A24712-1, A24712 (Item #: 127413, Ref: R4363) $158.00

No
Picture
Seat Back - Black Vinyl on Wood For 730, 740, 830, 840, 930, 940, 1030, 1070, 1175 Comfort King (Item #: 101206, Ref: R1169) $159.91

Seat Bottom - Black Vinyl on Steel For 430, 440, 470, 530, 540, 570, 580, 630, 730, 740, 830, 930, 940, 1030. Replaces A24713 (Item #: 127412, Ref: R4362) $123.00

No
Picture
Seat Bottom - Black Vinyl on Wood. For tractor models 730, 740, 830, 840, 930, 940, 1030, 1070, 1175 Comfort King. (Item #: 101205, Ref: R1168) $114.64

Seat Spring, Rubber - With rivets, must reuse old side plates. For tractor models 400, 420, 600, 700, 800, (730, 830 up to SN# 8253500). (Item #: 123680, Ref: A7053) $114.00

Seat Spring, Rubber - Left - For 300, 300B, 400B, 430, 500B, 530, 600B, 700, 730, 800. Rubber Seat Spring - Left for the Easy Ride Seat. Price is for a SINGLE spring. Replaces G45003, 102228A, NDA448A. (Item #: 105322, Ref: R4070) $42.40

Seat Spring, Rubber - Right - For 300, 300B, 400B, 430, 500B, 530, 600B, 700, 730, 800. Rubber Seat Spring - Right for the Easy Ride Seat. Price is for a SINGLE spring.R4071 (Item #: 105323, Ref: NDA447A) $47.40

Steering

Front Spindle - Left Hand Spindle for 730, 830, 930, 1030. 17.125 inch Long and 2 inch Diameter. The wheel bearing kit used for this spindle depends if you have a 1 piece or 2 piece seal. Note that the 1 piece seal will replace the much more expensive 2 seal kit. The 1 piece seal kit is part number WBKCA2 and the 2 piece seal kit is part number WBKCA4. (Item #: 100304, Ref: A57274) $443.00

Front Spindle - Right Hand Spindle. For tractor models 730, 830, 930, 1030. 17.125 inch Long and 2 inch Diameter. The wheel bearing kit used for this spindle depends if you have a 1 piece or 2 piece seal. Note that the 1 piece seal will replace the much more expensive 2 seal kit. The 1 piece seal kit is part number WBKCA2 and the 2 piece seal kit is part number WBKCA4. (Item #: 100303, Ref: A57275) $293.00

Front Spindle - Spindle, Fits LH or RH. For tractor models 730, 830, 930, 1030. A= 18.250 inch, B= 1.50 inch, C= 2.00 inch, D= 1.750 inch, E= 1.375 inch. The wheel bearing kit used for this spindle depends if you have a 1 piece or 2 piece seal. Note that the 1 piece seal will replace the much more expensive 2 seal kit. The 1 piece seal kit is part number WBKCA2 and the 2 piece seal kit is part number WBKCA4. (Item #: 100305, Ref: A57441) $230.00

Front Spindle - Left and Right Hand Spindle. For tractor models 730, 830, 930, 1030 With Wheatland Front End. A= 18.250 inch, B= 1.465 inch, C= 2 inch, D= 1.750 inch, E= 1.375 inch. The wheel bearing kit used for this spindle depends if you have a 1 piece or 2 piece seal. Note that the 1 piece seal will replace the much more expensive 2 seal kit. The 1 piece seal kit is part number WBKCA2 and the 2 piece seal kit is part number WBKCA4. (Item #: 100306, Ref: A57512) $358.00

Needle Bearing - For Case tractor models 380B, 730, 770, 830, 870, 930, 970, 1030, 1070, 1175, Compatible with Case Construction and industrial models 480C, 480E, 480F, 580B, 580C, 580D (all yellow with red color), Replaces Case OEM number A28230, (Item #: 114818) $15.90

Needle Bearing - For Case tractor models 730, 830, 930, 1030 (all upper needle bearing) Replaces Case OEM number A7851, , Compatible with John Deere tractor models 820, 1020, 1520, 2020, 2040, 2150, 2155, 2240, 2440, 2640, 2840, 3030, 3120, 3130, Compatible with John Deere Construction and industrial models 302, 401, 401B, Compatible with Oliver tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1955, 2055 Replaces Oliver OEM number 72161722, KS5044, , Compatible with White tractor models 2-70, 2-85, 2-88, 2-105, 2-110, 2-135, 2-155, 60 American, 80 American, 100, 120, 125, 140, 145, Replaces White OEM number 72161722, KS5044, Inside Diameter: 1.50", Outside Diameter: 1.875", Width: 1", (Item #: 117408) $20.80

Spindle, Used - For Case tractor models 730, 830, 930, 1030 (with Wheatland front end), Replaces Case OEM number A57512, Left Hand or Right Hand, Upright Shaft Length: 18.250", Steering Arm Surface Diameter: 1.465", Upright Shaft Diameter: 2.000", Inner Bearing Diameter: 1.750", Outer Bearing Diameter: 1.375", For a new version of this item use Item #: 100306, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430502) $202.01

Steering Arm - Center Long Arm -.6 to.7 Short Arm -.75 to.85 For 730, 830, Early 930, Early 1030 (Item #: 100332, Ref: R2862) $277.00

No
Picture
Steering Arm - Center Both Arms -.6 to.7 For tractor models 730, 830, Early 930, Early 1030. (Item #: 100333, Ref: R2863) $261.00

Steering Arm, LH, Used - For Case tractor models 730 (s/n 8253501-later), 830 (s/n 8253501-later), 930 (s/n 8339078-earlier), 1030 (s/n 8332878-earlier), Replaces Case OEM number A24653, 48" to 73" and 53" to 82" tread, Left Hand, Splines: 17, Tapered, For Left Hand use Item #: 437253, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437252) $89.01

Steering Shaft Cross and Bearing (U-Joint) - Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Some steering systems use more than one joint. Sold individually. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862, VTA3127 (Item #: 115351, Ref: 70224890) $11.00

Steering Wheel - This steering wheel has a 40 spline hub. For tractor models 200B, 300B, 400B, (430, 530 up to serial number 8650135), 470, 500B, 570, 580, 600B, 630, 700, 730, 800, 830, 930, 1030. (Item #: 101416, Ref: A20456) $72.00

Steering Wheel Cap - Chrome - For Case tractor models 430, 530, 630, 730, 830, 930, 1030, Replaces Case OEM number A20475, A38785, Chrome Emblem, For chrome with black background use Item #: 149786, (Item #: 101417) $35.00

Steering Wheel Emblem Plastic - This plastic version is very detailed and looks better than the original or metal version. With Case eagle says "Power Steering". For tractor models (300B, 320B, 400B, 420B, 510B, 511B, 610B, 611B SN# 612001 and up), (430, 530 SN# 8297800 and up), (700, 800 SN# 8140001 and up), (730, 830 except grove), 730CK, 830CK, 930CK, 1030CK. Replaces OEM A38785 and CKS058. (Item #: 149786, Ref: A20475) $37.80

Steering Wheel Nut - This steering wheel nut fits the following tractor models: D, DC, DC3, DC4, DCS, DEX, DH, DI, DO, DV, L, LA, S, SC, SI, SO, V, VA, VAC, VAE, VAH, VAI, VAO, VAS, VC, VI, VO, 1030, 1030CK, 930, 1031, 1032, 200, 200B, 210, 210B, 211B, 300, 300B, 310, 310B, 320, 320B, 400B, 410B, 420B, 430, 430CK, 440, 470, 530, 530CK, 540, 570, 500, 520, 600, 610, 620, 630, 640, 730, 830, 730CK, 740, 830CK, 840, 900, 930CK, 931, and 932. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 4291112, 352536R1, 25-1512 and 251512. (Item #: 157780, Ref: 353435X1) $1.00

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $8.00

Tie Rod - A= 4.840", B= 1.00", 16 thread Female. For tractor models (1030, 730, 830 DOM SN# 8332878 and up), (930 DOM SN# 8339078 and up). (Item #: 104458, Ref: A41520) $33.70

Tie Rod - For Case tractor models 730, 830, 930 (w/53"- 82" Tread DOM SN -8339078), 1030, Replaces Case OEM number A24668, Dimension A: 20.250" Long, (Item #: 104452) $100.00

Tie Rod - For Case tractor models 730 (All w/48"- 73" Tread DOM SN -8332878), 930 (All w/48"- 73" tread DOM SN -8339078), Replaces Case OEM number A24656, Dimension A: 17.750" Long, (Item #: 104453) $63.00

Tie Rod - For Case tractor models 730 (s/n 8332878-later), 830 (s/n 8332878-later), 930 (s/n 8339078-later), 1030 (s/n 8332878-later), Replaces Case OEM number A41524, 6 Notches, Length: 15.750", Thread: 1" x 16 UN, Fits models with 53" - 73" tread, (Item #: 104460) $39.90

Tie Rod - For Case tractor models 730, 830, 930 (w/60"- 88" Tread DOM SN 8339078-), 1030, Replaces Case OEM number A41522, Dimension A: 19.750", 8 Notches, (Item #: 104461) $77.00

Tie Rod End - Measures 3.500 inches from the center of the ball joint to the end of the threaded rod. It is 0.812 inches - 18 right hand thread. Replaces A28419 (Item #: 104456, Ref: A28419) $31.70

Tie Rod End - Left Hand - For Case tractor models 500, 730, 830, 930, Replaces Case OEM number A28704, Fits Left Hand Side, Dimension A: 3.500", Dimension B: .812", 18 Left Hand Thread, (Item #: 104455) $32.80

Tie Rod Tube - For Case tractor models 730, 830, 930 (w/53"- 82" Tread DOM SN -8339078), 1030, Replaces Case OEM number A24669, Dimension A: 34.500" Long, (Item #: 104454) $72.00

Tie Rod Tube - For Case tractor models 730, 830, 930 (w/48"- 73" Tread DOM SN -8339078), Replaces Case OEM number A24657, Dimension A: 29.500" Long, (Item #: 104457) $54.00

Tie Rod Tube - For Case tractor models 730, 830, 930 (w/53"- 73" Tread DOM SN 8339078-), 1030, Replaces Case OEM number A41523, Dimension A: 28.812" Long, (Item #: 104459) $56.00

Tie Rod Tube - For Case tractor models 730, 830, Replaces Case OEM number A8747, Dimension A: 36.750" Long, (Item #: 104462) $78.00

No
Picture
Tie Rod Tube - For Case tractor models 730, 830, 930 (DOM SN 8339078-), 1030, Replaces Case OEM number A41521, Dimension A: 35.812" Long, Additional Handling and Oversize Fees Apply To This Item, (Item #: 104463) $59.00

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: G45291, G57046 (Item #: 103768, Ref: FW60166) $92.00

Front Wheel Hub - For tractor models 770, 870, 970, 1070, 1175, 730, 830, 930-DOM, 1030, 2090, 3390, 2094, 2294, 1896, 2096, 480B, 430, 530, 480CK. Casting number 57332 (Item #: 100327, Ref: A57336) $123.00

Rim Clamp, Used - For Case tractor models 730, 770, 830, 870, 930, 970, 1030, 1070, 1090, 1170, 1175, 1270, 1370, 1570, 1896, 2090, 2094, 2096, 2290, 2294, 2390, 2394, 2590, 2594, 3294 Replaces Case OEM nos A57654, A33169, , Compatible with Case IH tractor models 3394, 3594, 5120, 5130, 5140, 5220, 5230, 5240, 5250, 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950, Replaces Case IH OEM nos A57654, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498151) $15.01

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims 535453M91, 535452M91, PAR10X28, C5NN1050J and C5NN1050H. Replaces: A9440, G15442, K200142. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.60

Wheel Bearing Kit - Wheel Bearing Kit for tractor models 730, 830, 930, 1030, 770, 870, 970, 1070, 1175, 2090, 2290, 2094, 2294, 2096, 2093 (WBKCA2 has a 1 piece seal and will replace the 2 piece seal). Kit contains 1 each of the following p/n 25580 (Cone), 25520 (Cup), 25877 (Cone), 25820 (Cup), A57250 (Seal). Seal Measurements are 3.354 Outside Diameter and 2.165 Inside diameter. (Item #: 100315, Ref: WBKCA2) $45.50

Wheel Bearing Kit - For tractor models 530CK, 730, 830, 930, 1030, 770, 870, 970, 1070, 1175, 2090, 2290, 2094, 2294, 1896, 2096 (1 piece seal with retainer). Kit contains 1 each of the following p/n 25580 (Cone), 25520 (Cup), 25877 (Cone), 25820 (Cup), A27139 (Seal). Seal Measurements are O.D. 3.2187 I.D. 2.468. (Item #: 104392, Ref: WBKCA4) $116.00

Wheel Hub Seal - For Case tractor models 730, 770, 830, 870, 930, 970, 1030, 1070, 1175, 1896, 2090, 2094, 2096, 2290, 2294, Replaces Case OEM number A27139, (Item #: 140552) $62.62

Wheel Hub, Used - For Case tractor models 630 (s/n 8208001-later), 730 (s/n 8332878-earlier), 830 (s/n 8332878-earlier), 930 (s/n 8339008-earlier), 1030 (s/n 8332878-earlier), Replaces Case OEM nos A22743, Replaces Case Casting nos A22742, 6 bolt with 1/2" tapped holes, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498259) $112.01

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Decals and Emblems

Decal - Case Eagle Decal, 2 inch. (Item #: 100513, Ref: R5170) $2.70

Decal - Case Eagle Decal, 1-1/4 inch printed on vinyl. (Item #: 183056, Ref: R5235) $2.60

Decal - Case Eagle Decal, 4 inch. (Item #: 100524, Ref: R1299) $5.30

Decal - Case Eagle Decal, 6 inch. (Item #: 100525, Ref: R1300) $7.00

Decal - Case Eagle Decal, 9 1/2 inch. (Item #: 100526, Ref: R1303) $8.80

Draft-O-Matic Decals - Draft-O-Matic Decals, Round (Set of 2) - Vinyl Cut. Decal is used in association with any other listed decal set if you have a DRAFT-O-MATIC. (Item #: 100517, Ref: R2247) $26.20

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap - This thermal battery wrap is used to keep your battery warm. It is 60 Watts and measures 28 inches long. (Item #: BTW28) $22.50

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $19.20

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80

No
Picture
Spark Plug - Standard tip, 14mm thread, 3/8" reach. Replaces Champion J17LM, Motorcraft A7CLM. NOTE: Verify spark plug type before ordering. (Item #: AL456) $2.40

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $16.80

$Case 730 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $16.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Case 730 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$Case 730 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Case 730 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

$Case 730 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$Case 730 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$Case 730 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - Rain Caps are located in the EXHAUST category of the Accessories and Universal parts section.

NOTE

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.00

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $12.90

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $14.00

Carburetor Elbow and Strainer - Fits some Case models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $17.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

$Case 730 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Gauges

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Eagle Hitch Leveling Knob, Rubber - For all models using Eagle Hitch. Replaces O4995AB. (Item #: 126108, Ref: A26845) $15.20

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

No
Picture
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

Universal Pressure Gauge, Hydraulic - 160 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: GG160) $9.96

Universal Pressure Gauge, Hydraulic - 100 LB Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: GG100) $9.96

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1/2 inch diameter shaft. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10

Lights

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Item #: 173803, Ref: L408-12V) $38.40

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Case Yellow, Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 154618, Ref: TP160GAL) $100.00

No
Picture
Paint, Case Yellow, Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 154616, Ref: TP160QT) $42.80

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.00

No
Picture
Paint, Desert Sand, 1 Gallon - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108139, Ref: TP130GAL) $105.00

No
Picture
Paint, Desert Sand, 1 Quart - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108138, Ref: TP130QT) $38.10

No
Picture
Paint, Desert Sand, Spray Can - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. Ensure you have correct color. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108137, Ref: TP130SP) $10.30

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.00

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, Power White, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100348, Ref: TP271GAL) $61.00

No
Picture
Paint, Power White, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100347, Ref: TP271QT) $24.00

No
Picture
Paint, Power White, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100346, Ref: TP271SP) $9.80

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $173.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: A22279, A30834, A42242, G45307, K964615, O10582AB, K902187, K960750 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $78.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.00

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $57.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube, not for radial tires. (Item #: 183819, Ref: WHS064) $82.00