FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Case 540 Tractor Parts

[Categories] [All Case Models] [Print]

Brakes

Brake Assembly - Kit - This Brake Kit includes 2 lined brake bands, 4 links, 2 pins, 1 brake actuating drum with lining, 1 splined brake disc assembly with lining, 4 brake actuator balls and 2 brake actuator return springs. 2 Kits required per tractor. Price is for 1 Kit. Verify part numbers to ensure you are ordering the correct parts. For models 430, 430CK, 431, 435, 440, 441, 445, 530, 530CK, 531, 535, 540, 541, 545, W3, W5, 470, 480, 570, 580, 580CK, 584D, 585D, 586D, 630, 631, 632, 634, 640, 641, 642, 644. Replaces A51814, A55474, A154350, A156383, A157157, 1335578A1, 1995396C1, 249022A1. Individual part numbers in kit: A41728, A42043, A44713, A44714, A44719, A44721, A44756, A47524, A47683, A47716, A47885, A47886, A142979, A142980, G45361, G45362, G45468, G46344, G46345, G48508, G49082, 133576A, 135577A1, 1995397C1, 1995399C1, 1995400C1, 249018A2, 249018A3, 249020A1, 249021A1. (Item #: 156272, Ref: CKS3717) $260.00

Brake Band - Brake Band for tractor models 430, 431, 435, 441, 445, 480, 530, 531, 535, 540, 541, 545, 470, 570, 630, 631, 632, 634, 640, 641, 642, 644, W3, 430CK, 530CK, W5, 480B, 480C, 480CK, 480D, 580B, 580C, 580CK, 580D, 580, 584, 584D, 585D, 586D, 586, 586C. 4 required per tractor. Replaces Case part number 1995397C1, 249018A2, 249018A3, A41728, A44719, A44721, A44756, A47683, A47716, G45468 . Also replaces 70276940, 70235610, 70277438. (Item #: 105398, Ref: 70277379) $32.20

Brake Shoe Spring - Diameter of wire is 0.088 of an inch, outside diameter is 0.525-0.666 of an inch, and has an overall length of 1.389 inches. 4 used per tractor, sold individually. For the following models: (430, 431, 435, 441, 445, 530, 531, 535, 540, 541, 545 serial number 6165270 and up), (630, 631, 632, 634, 640, 641, 642, 644 serial number 6165137 and up), 470, 570. Replaces A47524. (Item #: 162368, Ref: G48508) $7.40

Clutch

Clutch Disc - For Case tractor models 430 (s/n 8297801-8650135), 440, 470 (s/n 8656925-later), 480, 530, 540, 570, 640, Compatible with Case Construction and industrial models 480, 480C, 580, 580B, 580C, Replaces Case OEM number 1997844C1, 5403B-4, A51840, A51840-R4B, Clutch Diameter: 11", Clutch Hub Diameter: 1-3/8", Clutch Spline: 21, Clutch Center: Spring, Clutch Type: 4 Pad, Rockford Style, For a Remanufactured version of this sku use Item #: 204571, (Item #: 116904) $181.00

No
Picture
Clutch Disc - For Case tractor models 430 (s/n 8297801-8650135), 440, 470 (s/n 8656925-later), 480 (s/n 8297801-8650135), 530, 540, 570, 640, Compatible with Case Construction and industrial models 480B, 580, 580B, 580CK, Replaces Case OEM number A39087, 5402B, Replaces Case IH OEM number 1997843C1, Clutch Size: 11", Clutch Hub: 1-3/8", Clutch Splines: 21, Clutch Center: Solid, Clutch Type: 4 Pad, Clutch Style: Rockford, (Item #: 177092) $112.00

Clutch Disc, 11 inch - Has 1.186 inch spline dia, 17 splines in hub. Disc diameter 10.88 inches. Replaces Case #: 5344, A37192, A41911, G45799, G45800, 968280C1. Fits 430 (diesel), 430CK, 440, 441, 480CK, 530 (diesel), 530CK, 540 series, 630 (diesel). (Item #: 172811, Ref: 110813A1) $249.00

Clutch Release Bearing - This Release Bearing measures: inside diameter 2.250 inch outside diameter 3.803 inch width .8085 inch. Replaces 48974D, 649106R91, N1171, A7538, 10A21384GV, 120795R91, 48974DGV, 618237R91, A2526-31, A7538GV, TPAT17464GV, TP-AT17464GV, 104810A, 72160065, AT17464. (Item #: 100013, Ref: 10A21384) $30.60

Pressure Plate - Clutch Pressure Plate 11 inch, 3 lever, 24 spline on 1.5 inch hub. For tractor models 430CK, 530CK, 430, 431, 440, 441, 480, 500B, 530, 540, 541, 600, 600B, 630, 634, 640. (Item #: 176211, Ref: A36962) $349.00

No
Picture
Transmission Disc - Transmission Disc, 11 x 1 1/8 inches, 17 spline. For tractor models 430, 430CK, 530, 530CK, 540, 541, 630, 640. (Item #: 173320, Ref: G45797) $358.00

Cooling System

Water Pump - Comes with gasket. Fits 188 and 207 DIESEL engines using water pumps with the following casting numbers: A3775, A37758, A39074, A48363, G11939. Has FOUR holes for mounting bolts. 3.125 inch impeller diameter. Fits Case models: 1845, 310, 310E, 310G, 311, 350, 350B, 420C, 430, 431, 440, 450B, 455B, 470, 530, 540, 570, 580, 580B, 580CK, 580RR, 580SCK, 584C, 584D, 585D, 586C, 586D, 630, W3. Casting #'s A39074, A37751, G11939, A48363 (Item #: 100259, Ref: A146584) $47.00

Water Pump - Less Pulley. Has 2-3/4" impeller diameter. For tractor models 200 gas, 200B 1959 and later, 300, 300B gas 1959 and later, 310, 311, 320, 320B, 400B 1959 and later, 420 gas, 420B, 420BD, 420C gas, 430, 431, 480B, 480C, 480CK, 500B 1959 and later, 530, 540, 580B gas, 580CK gas, 600, 600B, 660, VA 1948 and later, VAC 1948 and later. Replaces VT341, VT327, A28860, G11956. (Item #: 104193, Ref: A148401) $67.00

Drive Train

Dual Range Lever Oil Seal - This dual range lever oil seal has a .625 inch Inside Diameter, a 1.128 inch Outside Diameter and is .25 inch wide. It Fits: 200, 200B, 210B, 211B, 300, 300B, 301, 301B, 302, 302B, 310, 310B, 311, 311B, 312, 312B, 400B, 410B, 411B, 420B, 420BD, 430, 430CK, 431, 435, 440, 441, 470, 530, 530CK, 531, 535, 540, 541, 545, 570, 600B, 610B, 611B, 614B, 630, 631, 632, 634, 640, 641, 642, 644. It is also used as a Low, Direct Or Shuttle Lever Oil Seal and a Triple Range Lever Oil Seal. Replaces: A26778, G105700, O4244AB, 471466 (Item #: 178140, Ref: A26778) $8.50

Electrical System

Distributor Cap, Autolite or Prestolite - This cap fits Autolite or Prestolite distributors ONLY, with 3-3/8 inch outside diameter, clip held cap. IAD-4010-A, IAD-4010-C, IAD-4020A, IAD-4020B, IAD-4023, IAD-4028-A, IAD-4043, IAD-6001-1B, IAD-6003-1A, IAD-6003-1B, IAD-6003-2A, IAD-6003-2F, IAD-6003-2J, IAD-6003-2K, IAD-6004-1C, IAD-6004-1D, IAD-6004-1E, IAD-6004-2D, IAD-6004-2E, IAD-6004-2G, IAD-6004-2H, IAD-6010-1. Note, it does not fit IGZ or IGW distributors. Replaces 1500831M91 or 15008310M91 or Replaces: IG1324, A8368, A8638, IG1324D, IG1324H, IG1324J, IG1324H, IG1324J, MX0510, 1500290M91, 1500831M91, IG-1324AD, IG1324AD, IG1324C (Item #: 105575, Ref: R2009) $17.50

Distributor Rotor Button - This Rotor Fits AUTOLITE distributors with 3-3/8 inch outside diameter, clip held cap, including distributors: IAD-4010-A, IAD-4010-C, IAD-4020A, IAD-4020B, IAD-4023, IAD-4028-A, IAD-4043, IAD-6001-1B, IAD-6003-1A, IAD-6003-1B, IAD-6003-2A, IAD-6003-2F, IAD-6003-2J, IAD-6003-2K, IAD-6004-1C, IAD-6004-1D, IAD-6004-1E, IAD-6004-2D, IAD-6004-2E, IAD-6004-2G, IAD-6004-2H, IAD-6010-1. Note, it does not fit IGZ or IGW distributors. Replaces IG-1657R, IGS-1016B, A20416, A8369, IG1657R, T-7691, T7691, TGO-7746, TGO7746, 1500293M1, 1500293M91, 21A321, AV101088. (Item #: 112188, Ref: IG1657R) $7.00

Electronic Ignition Conversion Kit, 12V Negative Ground - 12 Volt NEGATIVE Ground. (Also available in 12 Volt POSITIVE, 6 Volt NEGATIVE and 6 Volt POSITIVE - CALL). For the following models using Autolite IAD-6003, IAD6003-2F and IAD6004 distributors. (VERIFY your distributor for match): VA, VAC, VAE, VAI, VAO, VAS, 150, 200, 200B, 210, 210B, 211B, 300, 302, 310, 320, 350B, 351, 400, 400B, 430, 440, 441, 450, 500, 530, 540, 540C, 541, 541C, 580CK, 600B, 640, 640C, 641, 641C, 650, 655, 675, 1150, 1155, 1255. Electronic Ignition Conversion Kit, replaces points and condenser with an electronic module. Use with 12 volt negative ground system. MUST ALSO REPLACE CAP (part number AL165) and ROTOR (part number AL150) both available from an auto parts store. (Item #: 105088, Ref: 1541) $130.00

Fuse Holder - Mounts on 5/8 inch diameter hole. 2 spade connectors. Replaces: 578489, cap: A10958, A22874, A8006, D122429, D23834, D49077, F63019, G44876, T39463 (Item #: 112273, Ref: 376852R91) $10.40

Ignition Kit, Autolite Distributors - Kit contains Points, condenser, Rotor. Used with Autolite distributors ONLY, with 3-3/8 inch outside diameter, clip held cap. IAD-4010-A, IAD-4010-C, IAD-4020A, IAD-4020B, IAD-4023, IAD-4028-A, IAD-4043, IAD-6001-1B, IAD-6003-1A, IAD-6003-1B, IAD-6003-2A, IAD-6003-2F, IAD-6003-2J, IAD-6003-2K, IAD-6004-1C, IAD-6004-1D, IAD-6004-1E, IAD-6004-2D, IAD-6004-2E, IAD-6004-2G, IAD-6004-2H, IAD-6010-1. Note, it does not fit IGZ or IGW distributors. Replaces OEM #s: 1500293M1, 1508770M91, 1508810M91. (Item #: 105290, Ref: S.42933) $18.00

Neutral Safety Starter Switch - Built to OEM specification, this Neutral Safety Starter Switch has the following measurements: 35 amp at 12 Volt, 20 amp at 24 Volt, 9/16-18 thread UNF-2A, 5/16 inch stem length, 1-1/8 inch hex head. Used on Case: 430, 530, 630, 730, 930, 1030, 770, 830, 870, 970, 1030 Comfort King, 1031, 1032, 1070, 1090, 1170, 1175, 1270, 1370, 2470, 940, 830 Comfort King, 732, 743, 832, 730 Comfort King, 843, 831, 932, 930 Comfort King, 842, 731, 734, 931, 733, 833, 941, 431, 435, 441, 445, 531, 535, 540, 541, 545, 631, 632, 634, 640, 641, 642, 644, 740, 741, 742, 744, 840, 841. Replaces G44873, A20990, 716945, 80716945 (Item #: 178501, Ref: A20990) $20.20

No
Picture
Starter - 3 Bolt mounting, 12 Volt Starter with 9 Tooth Starter Drive, clockwise rotation. REMANUFACTURED - add $75.00 refundable core charge. For 1150, 1155, 1255, 159, 188, 310G, 400, 430, 430CK, 435, 440, 441, 450, 470, 480, 480CK, 500, 530, 530CK, 535, 535LCK, 540, 541, 570, 580, 580CK, 640, 641, W5. REPLACES MDU7102. (Item #: 203163, Ref: TS-5007) $440.00

Engine Bearings

No
Picture
Main Bearing Set - Standard journal size is 2.625", currently only available in STD size. For tractor models 530, 540, 570 all with 159 gas engine. (Item #: 106085, Ref: MS-596P) $179.00

No
Picture
Main Bearing Set, .010 - For tractor models 310, 450, 450B, 480, 480B, 580, 580C, 580CK, 580D, 350, 500 all with D207 diesel engine. And these Models: LCK430, LCK530, 310B, 420, 425, 420, 440, 480CKB, 480CKC, 480D, 480LL, 500LK, 530C, 580B, 580C, 580CK, 580CKB, 680CK, 311B, 320B, 330, 430, 431, 441, 470, 480, 530, 531, 540, 540C with 188 CID diesel engine. (Item #: 106093, Ref: MB364-10) $93.00

No
Picture
Main Bearing Set, .020 - For tractor models 310, 450, 450B, 480, 480B, 580, 580C, 580CK, 580D, 350, 500 all with D207 diesel engine. And these Models: LCK430, LCK530, 310B, 420, 425, 420, 440, 480CKB, 480CKC, 480D, 480LL, 500LK, 530C, 580B, 580C, 580CK, 580CKB, 680CK, 311B, 320B, 330, 430, 431, 441, 470, 480, 530, 531, 540, 540C with 188 CID diesel engine. (Item #: MBK364-20) $98.74

No
Picture
Main Bearing Set, .030 - Standard journal size is 2.625". For tractor models (430, 440, 470 all with 148 gas engine from 1961 and up), (530, 540, 570 all with 159 gas engine). (Item #: 106088, Ref: MS-596P-030) $132.00

No
Picture
Main Bearing Set, Std - For tractor models 310, 450, 450B, 480, 480B, 580, 580C, 580CK, 580D, 350 all with D207 diesel engine. And these Models: LCK430, LCK530, 310B, 420, 425, 420, 440, 480CKB, 480CKC, 480D, 480LL, 500LK, 530C, 580B, 580C, 580CK, 580CKB, 680CK, 311B, 320B, 330, 430, 431, 441, 470, 480, 530, 531, 540, 540C with 188 CID diesel engine. (Item #: 106092, Ref: MBK364) $113.00

No
Picture
Rod Bearing - 4 required price is for 1. For tractor models 430, 440, 470, 530, 540, 570, 630, 640 all using either 148 gas engine from 1961 up, 159 gas engine or 188 gas engine. Available in .STD, .010, .020, .030. Please specify what size you need in comments section. (Item #: 106080, Ref: CB-655P) $10.40

No
Picture
Rod Bearing, .010 - Used in 148 CID gas engine 1961-1970 with rod forging # G-11176. For tractor models 300, 300B, 310B, 311B, 320B, 330, 400B, 420, 425, 430, 431, 440, 441, 470, 480, 480CKB, 480CKC, 480D, 480LL, 500LK, 530, 530C, 531, 540, 540C, 541, 541C, 570, 580B, 580C, 580CK, 580CKB, 584, 600, 630, 640, 680CK, LCK430, LCK530. (Item #: 106082, Ref: A36502) $13.30

Rod Bearing, .020 - Used in 148 CID gas engine 1961-1970 with rod forging # G-11176. For tractor models 300, 300B, 310B, 311B, 320B, 330, 400B, 420, 425, 430, 431, 440, 441, 470, 480, 480CKB, 480CKC, 480D, 480LL, 500LK, 530, 530C, 531, 540, 540C, 541, 541C, 570, 580B, 580C, 580CK, 580CKB, 584, 600, 630, 640, 680CK, LCK430, LCK530. (Item #: 106083, Ref: A36503) $8.20

No
Picture
Rod Bearing, .030 - Used in 148 CID gas engine 1961-1970 with rod forging # G-11176. For tractor models 300, 300B, 310B, 311B, 320B, 330, 400B, 420, 425, 430, 431, 440, 441, 470, 480, 480CKB, 480CKC, 480D, 480LL, 500LK, 530, 530C, 531, 540, 540C, 541, 541C, 570, 580B, 580C, 580CK, 580CKB, 584, 600, 630, 640, 680CK, LCK430, LCK530. (Item #: 106084, Ref: A36504) $7.50

No
Picture
Rod Bearing, Std - Used in 148 CID gas engine 1961-1970 with rod forging # G-11176. For tractor models 300, 300B, 310B, 311B, 320B, 330, 400B, 420, 425, 430, 431, 440, 441, 470, 480, 480CKB, 480CKC, 480D, 480LL, 500LK, 530, 530C, 531, 540, 540C, 541, 541C, 570, 580B, 580C, 580CK, 580CKB, 584, 600, 630, 640, 680CK, LCK430, LCK530. (Item #: 106080, Ref: A36500) $10.40

Thrust Washer, Front - Used on Continental engines F140, G148, F162, F163, D202, DS202, PD202, DS6202, 124, VA124, VAE, G126, Z120, F124. This thrust washer replaces OEM numbers 15285A (Ferguson, Massey Harris), A30472 (Case), VT3376 (Case). Measures 2-9/32 inches inside diameter, 3-1/16 inches outside diameter, 3/32 inches thick. Measure before ordering. Some of the listed engines used more than one size. (Item #: 189167) $40.80

Engine Gaskets

Head Gasket Set - Case G159 Cylinder Head Gasket Set. Fits Case Tractors: 530, 540, 541, 570, 580B. Fits Case Skid Steer Loaders: 1845, 1845B, 1845S. Fits Case Construction and Industrials: W3, 530CK, 545, 580CK. (Item #: 106106, Ref: A189554) $194.00

No
Picture
Lower Gasket Set with Crankshaft Seal - Used on G148, G148B, G159 and G164 gas engines, this set contains Rear Crankshaft Seal part number A51339, Front Crankshaft Seal part number A39110, Oil Pan Gasket part number A40710, Conversion Gasket Set part number A189527. The pan gasket if for pans without ears. Used on Case 430, 470, 445, 480B, 441, 310D, 430CK, 480CK, 440, 310G, 420B, 310F, 420C, 351, 511B, 350, 510B, 600B, 610B, 500B, 611B, W5, W3, 570, 545, 541, 540, 580B, 530CK, 580CK, 530, 530B (Item #: 142558, Ref: RP321253) $155.00

No
Picture
Overhaul Gasket Set with Seals - For Case tractor models 311B, 430, 431, 441, 470, 480, 530, 531, 540, 541, 570, 584, 600, 640, Compatible with Case Construction and industrial models 310B, 420, 425, 480CK, 480D, 480LL, 580B, 580C, 580CK, 580CKB, Compatible with Case IH tractor models 330, Includes: Upper Gasket Set and Lower Gasket Set, Do not use with 188 CID diesel engine with narrow (4.457") flanged sleeve, Head gasket leakage will occur, (Item #: 176670) $192.00

Upper Gasket Set - For 207 Diesel engine in Models: 310, 310B, 320B, 330, 350, 420, 425, 430, 431, 441, 450, 450B, 470, 480, 480B, 480CKB, 480CKC, 480D, 480LL, 500, 500LK, 530, 530C, 531, 540C, 541, 541C, 570, 580, 580B, 580CK, 580CKB, 580D, 584, 600, 630, 640, 680CK, LCK430, LCK530, 540, 440, 610, 540. Upper Gasket Set includes Head Gasket. (Item #: 106108, Ref: A41425) $96.57

Engine Rebuild Kits

Engine Rebuild Kit - Less Bearings, G159 - For Case tractor models 530, 540, 541, Compatible with Case Construction and industrial models W3, 530CK, 580CK (engine s/n 2639669-earlier), Compatible with Case Engine (s) G159 (gas), Bore: 3.500", Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106088, (Item #: 130550) $660.00

Inframe Engine Kit G159 Gas - This Engine Kit is for G159 Gas Engines with oil pans that have no ears (Standard transmission). Includes Sleeve, Pistons, Rings, Upper Gasket Set, Pan Gasket (without ears), Rod Bearings, Main Bearings. Bearings are available in STD, .010, .020, .030. Note bearing sizes required in comments section of order form. (Item #: RP924133) $689.05

No
Picture
Valve Train Kit - GAS - For 159 CID in models 530, 540, 570. Contains: Intake Valves, Exhaust Valves, Valve Guides, Valve Springs and Valve Locks. (Item #: 120239, Ref: VTKCA530) $481.00

Engine Parts

Exhaust Valve - For Case tractor models 530, 540, 570, Compatible with Case Construction and industrial models W3, 530, 1737, Replaces Case OEM number G11962, Head Diameter: 1.270", Length: 5.33", (Item #: 128717) $16.30

Piston Pin Bushing - For Case tractor models 530, 540, 570, 630, 640, Compatible with Case Construction and industrial models W3, W5, 450, 530, 1737, Compatible with Case Engine (s) G159, G188, Replaces Case OEM number G46096, (Item #: 128604) $15.80

Valve Guide, Intake and Exhaust - Valve Guide for 124 CID 4-Cylinder Gas engine on (1951-1954): VA, VAC, VAH, VAI, VAO, VAS. For 148 CID Engine on 310, 320, 430, 440, 470. For 159 CID Engine on 530, 540, 570. Priced Each. Replaces 217-3673, VT131 (Item #: 107259, Ref: VT131) $5.30

Valve Overhaul Kit, G188D Diesel - For 188 DIESEL engine, complete for 1 engine, contains: (4) V1518 Intake valves, (4) V1517 exhaust valves, (8) VT3372 valve springs, (4) VG843 valve guides, (4) VG844 Valve guides, (16) VK115R Valve keys. Fits 310B, 311B, 320B, 330, 420, 430, 431, 441, 470, 480, 480CKB, 480CKC, 480D, 480LL, 500LK, 530, 530C, 531, 540C, 541, 541C, 570, 580B, 580C, 580CK, 580CKB, 584, 600, 630, 640, 680CK, LCK430, LCK530, 540, 440, 610, 540. (Item #: 120238, Ref: VOKC188) $173.00

Engine Pistons and Sleeves

No
Picture
Piston Pin Bushings - For 1.250 inch Piston Pins for Case 430, 440, 470, 530, 540, 570, 630, 640. (Item #: 166793, Ref: 223-3530) $15.70

Sleeve Seals, Pack of 2 - Pack of 2. O-ring for Piston Liner Sleeve. (NOTE: Sleeves usually use a minimum of 2 O-rings each). Used on Case Tractors with 124, 148 and 159 gas engines. Replaces original part numbers G46909, VT3375. (Item #: 128575, Ref: 1750000M1) $9.20

Engine Rings

Ring Set, For Single Cylinder - For 188 CID 4 cylinder diesel standard bore 3-13/16 inch, sleeve flange 4.537 inch O.D., contains: (1) 1/8 inch, (1) 3/32 inch, and (1) 3/16 inch ring per cylinder. (Item #: 120711, Ref: PRSC1882) $44.50

Exhaust System

Exhaust Manifold - For G126, G148, G159 and G164 cubic inch gas engines on: 310D Crawler, 310F Crawler, 310G Crawler, 420B Crawler, 420C Crawler, 430 Tractor, 430CK Wheel Tractor, 440 Tractor, 441 Tractor, 445 Tractor, 470 Tractor, 480CK Wheel Tractor, 480B Wheel Tractor, 1737 Skid Loader, 1737S Skid Loader, 1835 Skid Loader, 1835B Skid Loader, M570AT Tug, W3 Wheel Loader, 530 Tractor, 530CK Wheel Tractor, 540 Tractor, 541 Tractor, 545 Tractor, 570 Tractor, 580CK Wheel Tractor, 580B Wheel Tractor, 1150 Windrower, 1845 Skid Loader, 1845B Skid Loader, 1845S Skid Loader and others. These manifold measures 15-5/8 inches on the outside bolt holes. Replaces: G1064, G2009 (Item #: 126359, Ref: G2009) $235.00

Fuel System / Air Intake

Air Cleaner Oil Cup - Cup is 5 3/4 inches O.D. at the lip. For clamp style air cleaners, not clip style. For diesel applications 430, 470, 431. For gas applications 480, 530, 630, 570, 580, 540, 541, 634, 640, 641.Replaces 1001012M91, 10P1146, 10P931, 1754014M1, 1K-6054, 1K-6054, 311510, 362974R91, 375550R91, 378333R1, 52864DA, AB1626R, AB3477R, AM3172T, AM465T, AM468T, AT10592, G46325 (Item #: 108775, Ref: AB1626R) $33.70

Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On Case it is used For: [V, VA, VAC, VAI, VAIW, VAO, VAO-15, VAS, VC, VI, VO, 200B, 210B, 211B, 300B, 301B, 310B, 311, 311B, 312, 312B, 320B, 350, 351, 400B, 410B, 411B, 420B, 430, 440, 441, 445, 470, 530, 540, 541, 545, 570, 600B, 610B, 611B, 614B, 630, 632, 634, 640, 641, 642, 644, 730, 740, 741, 742, 743, 744, 830, 840, 841, 842, 843 (For choke cable bracket with Marvel Schebler carb # TSX42, TSX43, TSX74, TSX114, TSX212, TSX225, TSX253, TSX409, TSX474, TSX635, TSX710, TSX717, TSX749, TSX762, TSX785, TSX794, TSX798, TSX799, TSX804, TSX854, TSX936, TSX957SL, TSXU838) ], [310, 310B, 310C, 310D, 310E, 310F, 310G, 680CK, W5, W7, W9A (For choke cable bracket) ], Industrial; Skid steer: 1737 (For choke cable bracket); Replaces: 29-81, B51765 (Item #: 126116, Ref: CT29-81) $5.10

Carburetor - New carburetor with reversible linkage. Fits 540, 540C, 541, 541C, 600, 640C. Replaces numbers TSX798, TSX799 and TSX854, TSX939, TSX959. Center to center on the 2 mounting bolts is 2 11/16 inches. (Item #: 100752, Ref: 14996) $440.00

Carburetor - This is a New Zenith Style Carburetor with reversible linkage. Fits 500B, 510B, 511B, 530, 530CK, 535, 540, 541, 570, 580, 580B, 580C, 580CK, 600B, 610B, 611B, 614B, 630, 634, 640, 641, 642, 644, Loader: W5, W5A. Replaces numbers TSX798, TSX799 and TSX854, TSX939, TSX959. Case Part Numbers A135849, A35816, A35817. Center to center on the 2 mounting bolts is 2 11/16 inches. (Item #: 183805, Ref: 14996B) $330.00

Carburetor Float - Zenith Carburetor Float Use w/ Zenith Carburetors: 11535, 11537, 11580, 11588, 11705, 11973, 12032, 12066, 12217, 12232, 12590, 12293, 12427, 12471, 12509, 12534, 12548, 12685, 12758, 12902, 12913, 12994, 13048, 13106, 13107, 13108, 13109, 13151, 13153, 13154, 13161, 13294, 13304, 13316, 13318, 13328, 13338, 13337, 13338, 13372, 13374, 13378, 13384, 13390, 13406, 13416, 13465, 13546, 13578, 13588, 13596, 13608, 13612, 13628, 13716, 13758, 13783, 13795, 13808, 13875, 13881, 13912, 13913, 13914, 13915, 13916, 13917, 13920, 13956, 14991, 14992, 14995, 14996, 14997, 14999. Replaces E1NN9550AA, 1508089M91, B51359, 70227103, 381027R1, 1K7630. (Item #: 108448, Ref: R4531) $24.40

Carburetor Kit, Basic - Kit for Marvel TSX798, TSX799 used on 530, 540, 640. (Item #: 100734, Ref: MS102) $18.00

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 12534. For the following tractor models: 540, 540C, 541, 541C. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 204123, Ref: 1222-CARB) $315.01

Fuel Filter - The fuel filter measures 3 7/16 inches diameter, 2 3/4 inches tall. Comes with two large and one small rubber seal rings. Replaces A51346, A37187, A39109, G45288, 45288, 3602788R91, 309991, C3TZ9365B, 86546599, 309531, C3TA9176A, C3TZ9155B, C3TA9155B, 1021350M91, 1021351M1, 835944M91, 1596257M91, 1021351M3, A35668, 70000-14632, 7000014632 (Item #: 159728, Ref: 309991) $26.00

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $5.95

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number A11208. Gasket may be rubber or cork, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.70

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. Will fit the following models using/ 1.280 inch long glass bowl: D, DC, DC-3, DC-4, DCS, DH, DI, DO, DV, S, SC, SC-3, SC-4, SI, SO, V, VA, VAC, VAC-11, VAC-12, VAC-13, VAC-14, VAH, VAIW-3, VAO, VAO-15, VAS, VC, VO, 200, 200B, 210B, 211B, 210, 211, 300, 300B, 310B, 311, 311B, 312, 312B, 400B, 410B, 411B, 420B, 430, 441, 470, 480, 500B, 510B, 511B, 530, 540, 541, 570, 600B, 610B, 611B, 614B. Replaces A11209 and 357958R1. (Item #: 105382, Ref: 9N9162) $3.20

Needle Valve - Viton Float Valve Needle, Seat and Gasket Assembly for some Marvel Schebler carburetors. For the following models: D (specific for TSX11), 400, 540, 630, 634, 640, 641, 642, 644, 700, 740, 741, 742, 744, 830, 840, 841. Replaces 233-543 and B51914. (Item #: 179751, Ref: C3NN9D532A) $7.00

Pre Cleaner Assembly - Air Pre-Cleaner Assembly with a 2 inch base inner diameter and a 5 1/2 inch bowl. Fits models 1845, 1845S, 310, 320, 350, 420C, 430, 431, 450, 470, 480, 480CK, 530, 540, 541, 570, 580, 580CK, 630, 640, 641, W5A. Replaces D20604. (Item #: 186846, Ref: 101579AS) $81.00

Precleaner Cap Assembly - This new Air Pre-Cleaner Cap Assembly fits: 1700, 1845, 1845S, 450, 530, 570, 580, 630, 310, 320, 350, 420C, 430, 470, 480, 430CK, 431, 480CK, 540, 541, 580CK, 580 Construction King, 634, 640, 641, 642, 644. It replaces original part number D20604 . It has a 2 inch inside diameter plastic base, 5-1/2 inch pre-cleaner outside diameter. MEASURE BEFORE ORDERING. (Item #: 186846, Ref: B9NN9A660A) $81.00

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: A11211, T7040 (Item #: 105364, Ref: 49923D) $3.50

Hitch / Drawbar

No
Picture
Stabilizer Bar - For Case tractor models 200B, 210B, 211B, 300B, 311, 311B, 400B, 410B, 411B, 430, 431, 440, 441, 510B, 511B, 530, 531, 540, 541, 610B, 611B, 614B, Compatible with Case Construction and industrial models 210B, 300, 310, 310B, 320, 430, 545, Compatible with Ford tractor models NAA, 2N, 8N, 9N, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1800, 2031, 2110, 2111, 2120, 2130, 2131, 3000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, Compatible with Massey Ferguson tractor models F40, TE20, TEA20, TO20, TO30, TO35, 35, 50, 135, 150, 202, 203, 204, 205, 230, 235, 245, 2135, Replaces OEM number G16757, Additional Handling and Oversize Fees Apply To This Item, (Item #: 126690) $88.51

Lights

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, A24572, A40855, A42295, D71409, E98744, K962145. (Item #: 111241, Ref: 373662R91) $9.10

Light Ring - The dimensions of this light ring with screw are 4.5 inches in height and 0.885 inches in width. Replaces 10P1552, 230233, 371445R91, 371449R91, 371451R91, 70230233, AF3891R, B50255, B50258, JDS676. Verify measurements before ordering. Most models used more than one headlight style in production. (Item #: 154743, Ref: 371449R91) $25.70

$Case 540 Tail Light \ Dash Light Bulb - 12-Volt$
Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 to 12 Volts. Replaces: B50223 (Item #: 150699, Ref: TLBULB12V) $1.70

Oil System

Oil Filter, Spin-On - Spin on style oil filter measures with dimensions of 5 13/32 inches in length, 3 11/16 inches O.D. Replaces 237000, 4511629, 70237000, 74511629, C9NN6714A, 1959757C1, 388227R1, 918266R93, 920203C1, A146696, A17415, A33487, A37189, E36534, G45210, G45306, 500462, 86546614, 86546614DS, C1AZ6731A, C3AE6714A, C5NE6737B, D9NN6714EA, E7NN6714A, E7NN6714AA, 1851658, TY9425, TY9425E, 159045A, 83963907, 87800083, 83947505, 89832924. Please verify OEM number before ordering. (Item #: 118399, Ref: E7NN6714AA) $14.50

Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. If washer is needed, order EBU6734A. Replaces VT4521. (Item #: 126591, Ref: C5NE6730B) $8.10

Oil Pan Drain Plug Washer - This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.70

PTO / Driveline

PTO Drive Gear - This PTO Drive Gear has 14 Teeth and 15 Splines. It is used on 200, 200B, 210, 210B, 211, 211B, 300, 300B, 301, 301B, 302, 302B, 310, 311, 311B, 312, 312B, 320, 320B, 430, 430CK, 431, 440, 441, 470, 480, 480CK, 530, 530CK, 530CK, 531, 540, 541, 570, 580, 580CK, 310G, 350, 350B. (Item #: 113290, Ref: G10675) $143.00

PTO Shield - For tractor models D, DC, DH, DI, DO, DV, L (SN: 4200000 and up), LA, RC, S, SC, SI, SO, VA, VAC, VAH, VAIW, VAO, VAS, 200B, 210B, 211B, 300, 300B, 311, 312, 320, 350, 400B, 410B, 411B, 430, 351, 431, 441, 470, 480, 500, 500B, 530, 530CK, 531, 540, 541, 570, 580CK, 600B, 630, 631, 632, 640, 641, 900. Replaces O8303AB, B555AA, A27335, 2172AA. (Item #: 127027, Ref: A27335) $67.00

PTO Shield Mounting Plate - This plate is required for mounting a PTO shield on the following Case Tractors: D, DC, DC-3, DC-4, DH, DI, DO, DV, L (serial number 4200000 and up), LA, R, RC, S, SC, SI, SO, 200B, 210B, 211B, 300, 300B, 301, 302, 310, 311, 312, 320, 350, 351, 400B, 410B, 411B, 430, 431, 440, 441, 470, 480B, 500, 500B, 510, 511, 530, 530CK, 531, 540, 541, 570, 580B, 600, 600B, 610, 611, 614, 630, 631, 632, 640, 641, 642, 900. Replaces original part numbers: G16775, O5386AB and VT2297. (Item #: 127028, Ref: G16775) $38.10

PTO Shift Lever Housing Oil Seal - This PTO shift lever housing oil seal has a .625 inch Inside Diameter, a 1.128 inch Outside Diameter and is .25 inch wide. It Fits: 430, 430CK, 431, 435, 440, 441, 445, 470, 530, 530CK, 531, 535, 540, 541, 545, 570, 630, 631, 632, 634, 640, 641, 642, 644, 200B, 210B, 211B, 300, 300B, 301, 301B, 302, 302B, 310, 310B, 311, 311B, 312, 312B, 320B, 350B, 351, VA, VAC, VAC-11, VAC-12, VAC-13, VAC-14, VAI, VAIW, VAIW-3, VAO, VAO-15, VAS. Replaces: A26778, G105700, O4244AB (Item #: 178140, Ref: A26778) $8.50

Seats

Seat Adjustment Handle - For the following Case tractors with an easy ride seat: 200, 200B, 210B, 211B, 210, 211, 300, 300B, 310B, 311, 311B, 312, 312B, 320, 320B, 350, 400B, 410B, 411B, 420B, 351, 430, 301B, 431, 441, 470, 480, 500B, 530, 531, 540, 541, 570, 600B, 610B, 611B, 614B, 630, 631, 632, 634, 640, 641, 642, 644, 700 (Orchard Only), 730 (Standard only with serial numbers 8253501 to 8312174). Replaces G45001, VT5502, VTA3341. (Item #: 105324, Ref: 1016119M91) $28.70

Seat Back - Black Vinyl on Steel For 430, 440, 470, 530, 540, 570, 580, 630, 730, 740, 830, 930, 940, 1030. Replaces A24712-1, A24712 (Item #: 127413, Ref: R4363) $158.00

Seat Bottom - Black Vinyl on Steel For 430, 440, 470, 530, 540, 570, 580, 630, 730, 740, 830, 930, 940, 1030. Replaces A24713 (Item #: 127412, Ref: R4362) $123.00

Sheet Metal / Body Parts

Cage Nut - For Case tractor models 200B, 210B, 211B, 300, 300B, 311, 311B, 312, 312B, 350, 351, 400B, 411B, 500B, 510B, 511B, 530, 531, 540, 541, 570, 600B, 610B, 614B, 630, 640, 641, Compatible with Case Construction and industrial models 310, 420BD, 580, 580CK Replaces Case OEM number 131-105, G48001, 131-883, , Compatible with International tractor models Cub (s/n 210001-later), Cub Lo-Boy (s/n 10001-later), Hydro 100, 140, 240, 300, 330, 340, 350, 400, 424, 444, 450, 454, 460, 464, 484, 504, 544, 560, 574, 584, 606, 656, 660, 674, 684, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 21026, 21206, 21256, 21456, Compatible with International Harvester (s) 414 (s/n 210001-later), Compatible with International Construction and industrial models 2400A, 2424, 2444, 2500A, 2504, Replaces International OEM number 459063R1, 88592, 1502286C1, 363885R1, 5/16" - 18 NC, (Item #: 116870) $2.70

$Case 540 Cage Nut - 1\4 inch - 20 NC$
Cage Nut - 1/4" - 20 NC - For Case tractor models 200B, 210B, 211B, 300, 311, 312, 350, 400, 410, 410B, 411, 412, 420, 430, 440, 441, 470, 500, 510B, 511B, 530, 531, 540, 541, 570, 600, 610B, 611B, 630, 640, 641, 700, 702, 800, 801B, 900, 920, 930, 940, Replaces Case OEM number 131-98, 131-102, 131-115, G48002, Zinc finish, 1/4" - 20 NC, (Item #: 150680) $2.70

Steering

Steering Shaft Cross and Bearing (U-Joint) - Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Some steering systems use more than one joint. Sold individually. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862, VTA3127 (Item #: 115351, Ref: 70224890) $11.00

Steering Wheel Cap - Just like the original, this 3 Eagle Steering Wheel Emblem is chrome plated with black painted background. Used on 430 serial number 8262800 and up with hydrostatic steering, 530 serial number 8262800 and up with hydrostatic steering, 470 serial number 8656925 and up, 570 serial number 8656925 and up, 1200, 1200TK, 1470TK, 580B, 1470, 431 serial 8262800 and up with hydrostatic steering, 441 serial number 8262800 and up with hydrostatic steering, 480 serial 8262800 and up with hydrostatic steering, 531 serial number 8262800 and up with hydrostatic steering, 540 serial number 8262800 and up with hydrostatic steering, 541 serial number 8262800 and up with hydrostatic steering. (Item #: 113440, Ref: A35603) $56.00

Steering Wheel Nut - This steering wheel nut fits the following tractor models: D, DC, DC3, DC4, DCS, DEX, DH, DI, DO, DV, L, LA, S, SC, SI, SO, V, VA, VAC, VAE, VAH, VAI, VAO, VAS, VC, VI, VO, 1030, 1030CK, 930, 1031, 1032, 200, 200B, 210, 210B, 211B, 300, 300B, 310, 310B, 320, 320B, 400B, 410B, 420B, 430, 430CK, 440, 470, 530, 530CK, 540, 570, 500, 520, 600, 610, 620, 630, 640, 730, 830, 730CK, 740, 830CK, 840, 900, 930CK, 931, and 932. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 4291112, 352536R1, 25-1512 and 251512. (Item #: 157780, Ref: 353435X1) $1.00

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: G45291, G57046 (Item #: 103768, Ref: FW60166) $92.00

Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $15 shipping due to weight. (Item #: 103764, Ref: FW60156) $104.00

Front Wheel Lug Bolt - Wheel stud measuring 1/2 x 1 1/2 UNF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863, 16216A. For Case tractors using a 6 lug front rim. (Item #: 111560, Ref: 512581M1) $1.60

Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Verify measurements before ordering. Replaces: G10701. (Item #: 184824, Ref: 350719KIT) $23.00

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims 535453M91, 535452M91, PAR10X28, C5NN1050J and C5NN1050H. Replaces: A9440, G15442, K200142. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.60

Wheel 12X28 - Power Adjust Rim, 12 inches x 28 inches, 4 rail type. For Double Ramp Clamp. Holes in rail for Stop Body Screw are drilled parallel to axle (not at angle). For tractors: 200, 200B, 210, 210B, 211, 211B, 300, 300B, 301, 301B, 310, 310B, 311, 311B, 400B, 410B, 411B, 430, 431, 440, 441, 470, 530, 531, 540, 541, 570 and others using 12 inches x 28 inches 4 rail spin out rims. Additional $25 due to weight. (Item #: 103722, Ref: 1687615M91) $475.00

Wheel Bolt - This wheel bolt fits the following tractor models: 200, 200B, 210B, 211B, 300, 300B, 301, 301B, 302, 302B, 310, 310B, 311, 311B, 312, 320, 320B, 400B, 410B, 411B, 420, 420B, 430, 430CK, 431, 435, 440, 441, 445, 470, 480, 480B, 480CK, 500B, 510B, 511B, 530, 530CK, 531, 535, 540, 541, 545, 570, 580, 580B, 580CK, 600B, 610B, 611B, 614B, 630, 631, 632, 634, 640, 641, 642, 644, and W3. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part number O30739HT. (Item #: 108605, Ref: WB916) $2.20

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Decals and Emblems

Decal - Case Eagle Decal, 2 inch. (Item #: 100513, Ref: R5170) $2.70

Decal - Case Eagle Decal, 1-1/4 inch printed on vinyl. (Item #: 183056, Ref: R5235) $2.60

Decal - Case Eagle Decal, 4 inch. (Item #: 100524, Ref: R1299) $5.30

Decal - Case Eagle Decal, 6 inch. (Item #: 100525, Ref: R1300) $7.00

Decal - Case Eagle Decal, 9 1/2 inch. (Item #: 100526, Ref: R1303) $8.80

Draft-O-Matic Decals - Draft-O-Matic Decals, Round (Set of 2) - Vinyl Cut. Decal is used in association with any other listed decal set if you have a DRAFT-O-MATIC. (Item #: 100517, Ref: R2247) $26.20

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap - This thermal battery wrap is used to keep your battery warm. It is 60 Watts and measures 28 inches long. (Item #: BTW28) $22.50

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $19.20

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80

No
Picture
Spark Plug - Standard tip, 14mm thread, 3/8" reach. Replaces Champion J17LM, Motorcraft A7CLM. NOTE: Verify spark plug type before ordering. (Item #: AL456) $2.40

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $16.80

$Case 540 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $16.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Case 540 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$Case 540 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Case 540 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

$Case 540 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$Case 540 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$Case 540 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - Rain Caps are located in the EXHAUST category of the Accessories and Universal parts section.

NOTE

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.00

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $12.90

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $14.00

Carburetor Elbow and Strainer - Fits some Case models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $17.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

$Case 540 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Gauges

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Eagle Hitch Leveling Knob, Rubber - For all models using Eagle Hitch. Replaces O4995AB. (Item #: 126108, Ref: A26845) $15.20

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

No
Picture
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

Universal Pressure Gauge, Hydraulic - 160 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: GG160) $9.96

Universal Pressure Gauge, Hydraulic - 100 LB Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: GG100) $9.96

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1/2 inch diameter shaft. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10

Lights

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Item #: 173803, Ref: L408-12V) $38.40

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Case Yellow, Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 154618, Ref: TP160GAL) $100.00

No
Picture
Paint, Case Yellow, Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 154616, Ref: TP160QT) $42.80

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.00

No
Picture
Paint, Desert Sand, 1 Gallon - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108139, Ref: TP130GAL) $105.00

No
Picture
Paint, Desert Sand, 1 Quart - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108138, Ref: TP130QT) $38.10

No
Picture
Paint, Desert Sand, Spray Can - This Case Desert Sand color is SPECIAL ORDER - NON RETURNABLE. Ensure you have correct color. Ensure you have correct color. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108137, Ref: TP130SP) $10.30

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.00

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, Power White, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100348, Ref: TP271GAL) $61.00

No
Picture
Paint, Power White, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100347, Ref: TP271QT) $24.00

No
Picture
Paint, Power White, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100346, Ref: TP271SP) $9.80

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $173.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: A22279, A30834, A42242, G45307, K964615, O10582AB, K902187, K960750 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $78.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.00

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $57.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube, not for radial tires. (Item #: 183819, Ref: WHS064) $82.00