(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Allis Chalmers Tractor Wheel


Click here to see parts by model


Allis Chalmers Steering Wheel
- For WD, WD45, Styled, WC, Early D14, This steering wheel is for tractor models D15, and D17 with 18 inch diameter, 7\8 inch Smooth Hub with pin hole. Replaces OEM numbers V2260 and 202260. (Part No: 202260)
$44.85

Allis Chalmers Front Wheel
- 4-1\4 x 16, five bolt, 3 3\8 pilot hole and 3 inch bolt spacing center-to-center. For WC, WD, WD45, D10, D12, D14, D15, and D17. Not for use with front end loader. Add $10 additional shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces: 232832, 70232832 (Part No: R0088)
$76.94

Allis Chalmers Steering Wheel
- For D10, D12, D14, D15, D17, D19, D21. Steering Wheel. 17 1\2 inch diameter, splined hub. Black Plastic with Covered Spokes. Diamond Center AC Logo available as part number R3996. Also replaces 232033. (Part No: 70232033)
$54.41

Allis Chalmers Steering Wheel Center Logo
- For D10, D12, D14, D15, D17, D19, D21. CHROME Steering Wheel Center Logo used on 70232033 and 70233851 steering wheels. Replaces 70228474, 70233852, 70246724 (Part No: R3996)
$18.57

Allis Chalmers Flywheel Ring Gear
- Has 139 teeth, 14.0625 inch outside diameter. For D17, 170, 175 all with gas engine, W225 serial number PU96714 and up with gas engine. Flywheel Ring Gear. (Part No: 70226830)
$27.39

Allis Chalmers Flywheel Ring Gear
- 86 Teeth For G with Continental N-62 Engine. Replaces 70800311, 800311. (Part No: R0583)
$63.79

Allis Chalmers Flywheel Ring Gear
- 90 teeth. For B, C, CA. Inside diameter 10.645 inch, outside diameter 11.43 inch, .50 inch thick. (Part No: 70209292)
$33.75

Allis Chalmers Wheel Hub
- Six-bolt Wheel Hub that uses a press-on dust cap. For D15, Early D17, D19, Late 170, 175, 180, 185, 190, 190XT, 200, 6070, 6080, Early 7000. (Part No: R2818)
$92.41

No
Picture
Allis Chalmers Wheel Bearing Kit
- For tractor models D21, 210, 220. (Part No: R2822)
$48.80

Allis Chalmers Front Wheel Bearing Kit
- Front wheel bearing kit. Tractors: D10 (serial number 3501 to serial number 9000), D12 (serial number 3001 to serial number 9000), D10, D12, hi-clearance (prior to serial number 9000), WC, WD, WD45, D14, D15 (prior to serial number 9000), D17 (prior to serial number 42000). This kit is for one wheel only. Kit contains 1 each of the following part number 15288A SEAL, 70209987 CUP, 70222214 CONE, 70209983 CUP and 70209926 CONE. (Part No: 70228458)
$47.47

Allis Chalmers Wheel Hub With Cups
- Front wheel hub, 6 hole and grease fitting. Use with drive-in hub cap part number 229116 (NOT available at this time). For 160, 170, 175, 180, 185, 190, 190XT, 200, 6060, 6070, D15, D17, D19. (Part No: 261418RL)
$107.56

No
Picture
Allis Chalmers Front Wheel Bearing Kit
- Kit containes one each: 70209925(Cone), 70209984(Cup), 70209926(Cone), 70209983(Cup). Kit repairs one wheel. For tractor models B, C, CA, D10 (to 3500 & 9001 up), D12 (to 3000 & 9001 up). (Part No: 70228459)
$40.00

Allis Chalmers Front Wheel Bearing Kit
- Front wheel bearing kit, 5 bolt hub. Kit contains one each: 15250(Cup), 15118(Cone), 2776(cone), 2720(Cup), 70235120(Seal). Repairs one wheel. 42001 and up. For tractor models D10, D12, D15, D17. (Part No: 70247801)
$46.09

Allis Chalmers Steering Wheel
- For B, C. Steering wheel, metal spokes, 15 inch diameter, 11\16 inch Keyed Hub. (Part No: 70261861)
$40.44

Allis Chalmers Flywheel Ring Gear
- Has 116 teeth, outside diameter 11.12 inches, inside diameter 10.86 inch. Fits D10 (serial number 3501>), D12 (serial number 3001>), D14 (serial number 19001>), D15 (Gas\LP). (Part No: 70233196)
$41.36

Allis Chalmers Steering Wheel
- 16 inch diameter, 11\16 inch-3\4 inch tapered keyed hub, 3 steel spokes. For tractor models B, C, CA, RC. Replaces 70207370, 261861. (Part No: 70225330)
$40.44

Allis Chalmers Steering Wheel
- Steering wheel, 3 spoke. 18 inch diameter, 7\8 inch shaft. Round hub with pinhole. For tractor models WC, WD, WD45, (D14 serial number 19001 and up), (D17 serial number 24001 and up). Replaces: 70229677, 70202260, 229677, 202260. (Part No: 70229677)
$40.45

Allis Chalmers Steering Wheel
- For model G. (Part No: 70800101)
$41.94

Allis Chalmers Steering Wheel, Cream
- For D10, D12, D14, D15, D17, D19, D21. Steering Wheel. 17 1\2 inch diameter, splined hub. Creme Plastic with Covered Spokes. Diamond Center AC Logo available as part number R3996. (Part No: 70233851)
$48.99

Allis Chalmers Front Wheel Bearing Kit
- This is a complete Front Wheel Bearing Kit for 1 wheel, with a 6 bolt hub. Verify individual part numbers to ensure you are ordering the correct kit. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 500, 600, 6060, 6070, 6080, 615, 7000, (D15 serial number 9001 and up with 6 bolt hub), (D17 serial number 42001 with 6 bolt hub), D19, I60, I600. Kit contains one of the following 15250B, 15118, 26823, 26882, 70235120. (Part No: WBKAC2)
$39.16

No
Picture
Allis Chalmers Wheel Bearing Kit
- For tractor models 210, 220, D21. Includes 1 of each of the following 14274 (Cup), 14138A (Cone), 25520 (Cup), 25590 (Cone), 70239435 (Seal and Wear Sleeve). (Part No: WBKAC3)
$42.89

Allis Chalmers Wheel Hub, 5 Bolt
- Includes bearing cups. Hub has overall dimensions of 6 1\4 inch diameter and 5.28 inch depth. For tractor models (D10 serial number 3501 and up), (D12 serial number 3001-9000), D14, (D15 up to serial number 9001), (D17 series III up to serial number 42001), WD, WD45. (Part No: 70228897)
$107.86

Allis Chalmers Wheel Hub
- For use with threaded hub cap, 4.620 inch diameter pilot hole, 6.00 inch wheel bolt circle, replaces OEM number 236706. For tractor models 170, 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060 with 96 inch tread), 6070, 6080, 615, (7000 early), D15, D17, D19, 160, 1600. (Part No: 70261418)
$74.52

No
Picture
Allis Chalmers Front Wheel Hub, 8 Bolt
- 5\8 inch hole diameter x 2 inch spacing. For tractor models 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070, D21. Replaces 242599, 265166. (Part No: 70265167)
$103.50

No
Picture
Allis Chalmers Wheel Bearing Kit
- Includes 1 each of bearings 1109045, 72098861. For model 5020 with adjustable front axle. Smaller bearing measures .984 inside diameter and 2.047 outside diameter. Larger bearing measures 1.259 inside diameter and 2.559 outside diameter. (Part No: WBKAC6)
$50.22

No
Picture
Allis Chalmers Wheel Bearing Kit
- Kit includes 1 each of bearings 6305, 2389930 and 1 seal 72090687. For tractor models 5045, 5050 with adj. front axle. (Part No: WBKAC8)
$41.41

No
Picture
Allis Chalmers Wheel Bearing Kit
- Kit includes 1 each of bearings LM67048, LM67010, JL69349, JL69310, 70263021. For tractor models 6060, 6070 with standard tread. (Part No: WBKAC5)
$37.40

No
Picture
Allis Chalmers Front Wheel Hub
- Includes inner & outer races. For tractor models 6060, 6070. (Part No: 70263039)
$66.75

No
Picture
Allis Chalmers Wheel Bearing Kit
- Kit inludes 1 each 1440634X1 cup \cone set, LM48510 bearing cup, LM48548 bearing. For model 6140 SN# 2711 and up. (Part No: WBKAC9)
$16.89

No
Picture
Allis Chalmers Wheel Bearing Kit
- Kit includes 1 each of 14274 (Cup), 14138A (Cone), LM104912 (Cup), LM104949 (Cone), 70268132 (seal and wear sleeve). Replaces 268904. For tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070. (Part No: WBKAC4)
$33.40

No
Picture
Allis Chalmers Front Wheel Hub
- Includes inner & outer races. For tractor models 9130, 9150, 9170, 9190, 9435, 9455, 9630, 9635, 9650, 9655, 9670, 9675, 9690, 9695. (Part No: 72160484)
$116.75

No
Picture
Allis Chalmers Wheel Hub Cap
- This is a threaded type front wheel hub cap for tractor models 170, 175, 180, 185, 190, 190XT, 200, 6070, 6080, (7000 early), D15, D17, D19. (Part No: 70220403)
$11.10

No
Picture
Allis Chalmers Sleeve & Seal Kit, Wheel Bearing
- For tractor models 210, 220, D21. (Part No: 70239435)
$10.78

No
Picture
Allis Chalmers Sleeve & Seal Kit, Wheel Bearing
- For tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070. (Part No: 70268132)
$13.93

Allis Chalmers Front Wheel Hub Seal
- Used with spindles 72089232, 72089233. For model 5040. (Part No: 72089040)
$26.29

No
Picture
Allis Chalmers Flywheel Ring Gear
- For tractor models 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070. (Part No: 74001167)
$93.05

No
Picture
Allis Chalmers Steering Wheel
- 15-3\4 inches in diameter, 36 spline, 7 inches deep. For tractor models 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7030, 7040, 7050, 7060, 7080, 7580. Replaces 256852, 1142487. (Part No: 242933)
$131.83

No
Picture
Allis Chalmers Steering Wheel Cap
- Use with 242933 steering wheel. For tractor models 170, 180, 185, (190 from serial number 2485), 190XT, 200, 210, 220, 440, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7045, 7060, 7080, 7580. (Part No: 71362581)
$30.71

Allis Chalmers Steering Wheel
- Diameter 15 inch, 13\16 inch hub, 36 spline, 4.5 inch dish. For tractor models 6060, 6070, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 8550. Replaces OEM 71142487 and 70256852. (Part No: S.65515)
$43.68

Allis Chalmers Tail Wheel Assembly
- 6 inch x 9 inch tail wheel assembly with laminated tire, less hub. 4 inch pilot, 5 bolt holes, 5-1\2 inch bolt circle. 5-1\4 inches wide, 21 inch outside diameter, 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)
$124.93

Allis Chalmers Front Wheel Seal Kit
- For one wheel, contains one each of 70202103 retainer, 70202104 felt, and 70202105 metal washer. Tractors: RC, WC, WD, WD45, D10, D12, D14. Supersedes & replaces 228176 (Part No: 70208346)
$8.63

Allis Chalmers Steering Wheel Spinner, Bare Aluminum
- Comes with mounting hardware. (Part No: R3275)
$7.26

Allis Chalmers Steering Wheel Spinner, Black
- Comes with mounting hardware. (Part No: R3276)
$6.60

Allis Chalmers Steering Wheel Spinner, Red
- Comes with mounting hardware. (Part No: R3277)
$7.26

Allis Chalmers Steering Wheel Spinner, Green
- Comes with mounting hardware. (Part No: R3278)
$7.20

Allis Chalmers Steering Wheel Spinner, Blue
- Comes with mounting hardware. (Part No: R3279)
$7.20

Allis Chalmers Steering Wheel Spinner, Yellow
- Comes with mounting hardware. (Part No: R3280)
$7.20

Allis Chalmers Steering Wheel Spinner, Orange
- Comes with mounting hardware. (Part No: R6323)
$7.26

Allis Chalmers Front Wheel Weight
- For tractor models B, C and CA all with 3 inch x 15 inch 5 hole rims. J-Hooks are ordered separately as part number MHS038. (Part No: 850368M1)
$85.56

Allis Chalmers Front Wheel Weight J-Hook
- Used with Part number 850368M1. Includes hook, bolt and washer. Priced individually. 4 required per weight. (Part No: MHS038)
$3.38

No
Picture
Allis Chalmers Steering Wheel
- 16 inch diameter, 7 inch dish. Splined hub for tractor models: 170, 173, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050. Uses cap part number 70246722. (Part No: 70256852)
$40.56

No
Picture
Allis Chalmers Steering Wheel Cap
- Clear cap with the AC Allis Chamers logo. Fits steering wheel part number 70256852. For tractor models 170, 173, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050. (Part No: 70246722)
$17.94

Allis Chalmers Wheel 12X28
- Power Adjust Rim, 12 inches x 28 inches, 4 rail type. For Double Ramp Clamp. Holes in rail for Stop Body screw are drilled parallel to axle (not at angle). For tractors: WD, WD45, 160 and others using 12 inches x 28 inches 4 rail spin out. Replaces: 226270, 70226270. (Part No: 1687615M91)
$417.31

Allis Chalmers Wheel Bolt
- This wheel bolt fits the following tractor models: D10, D12, D14, D15, D17, I40, I400, I60, WD, WD45, 170, 175, 180, 185, and I600. It has an overall length of 1.81 inches, a thread size of 9\16 – 18 UNF, and thread length of 1.12 inches. Replaces part numbers: 225191, 251815, 70225191, and 70251815. (Part No: WB916)
$1.49

Allis Chalmers Flywheel Tab Washer
- This Flywheel Tab Washer is used on Allis Chalmers 160 and 6040 Tractors. It replaces original part numbers 13H4915, 159272A, 2100076, 27071, 71005067, 921062. (Part No: 731192M1)
$0.93

Allis Chalmers Flywheel Ring Gear
- This Flywheel Ring Gear has 110 teeth. Replaces 04602143, 4602143, 4602143, 153623541, 153623568, 82982157, 0673743, 0673742 (Part No: 676786A)
$62.93


Click here to see parts by model







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2015 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.