(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Allis Chalmers Tractor Rod


Click here to see parts by model


No
Picture
Allis Chalmers Rod Bearing Set
- For 160 with AD3.152 Perkins 3 Cylinder Diesel Engine. Connecting Rod Bearing Set (3). Available in standard, .010, .020, .030 (Part No: 72080082)
$17.13

Allis Chalmers Rod Bearing Set
- For tractor models 180, 185, 190, all with 2800 series engine. For 190XT, 200, 7000 with 2900 series diesel engine. For 7010, 7020, 8010, all with 649I-649T series engine. All with 301 CID 6 cylinder. Connecting Rod Bearing Set (3). Available in standard, .010 and .020. (Part No: CRK190XT)
$89.70

No
Picture
Allis Chalmers Rod Bearing Set
- For D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. Connecting Rod Bearing Set (6). Available in Standard, .010 undersize, .020. Specify desired size in comments section of order form. (Part No: CRK-A426)
$112.24

Allis Chalmers Tie Rod Tube with Bracket
- For 7000, 7010, 7020, 7040, 7045, 7060, 7080, 8010, 8030, 8050, 8070. Tie Rod Tube with Bracket. (Part No: 70269325)
$182.92

No
Picture
Allis Chalmers Rod Bearing
- For G with Continental N-62. FOR ANGLE SPLIT RODS. Rod Bearing Pair. 4 Required per Engine. Available in Standard, .010, .020. State size in comments section of Order Form. (rtp) (Part No: CB-524P)
$53.87

No
Picture
Allis Chalmers Rod Bearing Pair
- For G with Continental N-62. FOR HORIZONTAL SPLIT RODS. Rod Bearing pair, 4 required per engine. Available in Standard, .010, .020, .030. Specify size required in comments section of order form. .060 available, call for current price. 4 REQUIRED FOR ENGINE. (Part No: CB-345P)
$20.79

Allis Chalmers Tie Rod Assembly
- Consists of OEM part numbers 70250140 and 70250141. Replaces: 249418, 225280, 225279, 254662, 254661. For D14, D15, D17, D19, WD, WD45, 170, 175, 180, 185, 190XT, 200. Will fit if cut to proper length. (Part No: 70254660)
$51.24

Allis Chalmers Rod Bearing Pair, STD
- Individual Connecting Rod Bearings. Standard. For tractor models B, 1B, C, CA, RC. For standard 1.937 inch rod journal. Replaces: 70223629, 207460, 208602. (Part No: 223629)
$21.18

No
Picture
Allis Chalmers Rod Bearing Pair, .010
- Individual Connecting Rod Bearings .010. For tractors: B, 1B, C, CA, RC. (Part No: 223629-010)
$19.37

No
Picture
Allis Chalmers Rod Bearing Pair, .020
- Individual Connecting Rod Bearings .020. For tractors: B, 1B, C, CA, RC. (Part No: 223629-020)
$18.45

Allis Chalmers Rod Bearing, 201 Gas, STD
- Individual Connecting Rod Bearings. Standard. For tractors: W, WC, WF, WD, WD45G, D17G, 170G, B, C, CA, RC. (Part No: 231125)
$14.12

Allis Chalmers Rod Bearing, 201 Gas, .010
- Individual connecting rod bearings. .010 inch. For tractors: W, WC, WF, WD, WD45G, D17G, 170G. (Part No: 231125-010)
$14.12

Allis Chalmers Rod Bearing, 201 Gas, .020
- Individual connecting rod bearings. .020 inch. For tractors: W, WC, WF, WD, WD45G, D17G, 170G. (Part No: 231125-020)
$14.12

Allis Chalmers Rod Bearing, Std
- Individual connecting rod bearing.For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Part No: 237802)
$14.27

Allis Chalmers Rod Bearing, .010
- Individual connecting rod bearing. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Part No: 237802-010)
$14.27

Allis Chalmers Rod Bearing, .020
- Individual connecting rod bearing. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Part No: 237802-020)
$14.27

Allis Chalmers Tie Rod End, Female
- 17.500 inches long. For tractor models 180, 185, 190, 190XT, 200. Will also fit 170, D14, D15, D17, D19 if cut to proper length. Can also replace 250142 used on WD, WD45 if cut to length. (Part No: 70254661)
$31.05

Allis Chalmers Tie Rod Male
- Tie rod end with tube, outer. For adjustable front axles. 16-1\2 inches to center of post. 0.812 inch diameter. 50 inch minimum thread, not for Hi-Clear. For 180, 185, 190, 190XT, 200, D17, D19. (Part No: 70254662)
$30.11

Allis Chalmers Tie Rod
- Tie rod end, threaded, Right Hand threads, 3-3\4 to center of post. For tractor models 170, 175, 6060, 6070. (Part No: 70256151)
$44.05

No
Picture
Allis Chalmers Rod Bearing Set 010
- AD3. 152 PERKINS For 160 (Part No: 737071M91)
$9.35

No
Picture
Allis Chalmers Rod Bearing Set .020
- AD3.152 PERKINS. For 160. (Part No: 737072M91)
$10.65

No
Picture
Allis Chalmers Rod Bearing Set .030
- AD3.152 PERKINS. For 160. (Part No: 737073M91)
$10.65

Allis Chalmers Rod Bearing, Std
- Single rod bearing. For model D15. (Part No: 74517331)
$17.82

No
Picture
Allis Chalmers Rod Bearing, .002
- Single rod bearing. For model D15. (Part No: 74517332)
$23.20

Allis Chalmers Rod Bearing, .010
- Single rod bearing. For model D15. (Part No: 74517333)
$17.82

Allis Chalmers Rod Bearing, .020
- Single rod bearing. For model D15. (Part No: 74517334)
$17.82

No
Picture
Allis Chalmers Rod Bearing Set
- Internal Engine Parts. Standard rod bearing kit. For D3400 and D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1\4 inch standard bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. (Part No: CRK-A426)
$112.24

No
Picture
Allis Chalmers Rod Bearing Set
- Internal Engine Parts. Kit .010 undersize. For D3400 and D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1\4 inch standard bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. (Part No: CRK-A426-010)
$58.06

No
Picture
Allis Chalmers Rod Bearing Set
- Internal Engine Parts. Kit.020 undersize. For D3400 and D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1\4 inch standard bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. (Part No: CRK-A426-020)
$112.24

No
Picture
Allis Chalmers Rod Bearing Set, Standard
- With Journals measuring 1.937 inches. Engine Bearing Kit. For gasoline models. STANDARD Connecting Rod Bearing Set. For tractors: B, 1B, C, CA, RC. (Part No: CRK-ABC)
$64.64

No
Picture
Allis Chalmers Rod Bearing Set, .010
- Engine Bearing Kit. For gasoline models. .010 under size. For tractors: B, 1B, C, CA, RC. (Part No: CRK-ABC-010)
$62.16

No
Picture
Allis Chalmers Rod Bearing Set, .020
- Engine Bearing Kit. For gasoline models. .020 under size. For tractors: B, 1B, C, CA, RC. (Part No: CRK-ABC-020)
$62.16

Allis Chalmers Rod Bearing Set, Standard
- For tractor models W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). (Part No: CRK-AW)
$48.07

No
Picture
Allis Chalmers Rod Bearing Set, .010
- .010 inch. For tractor models W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). (Part No: CRK-AW-010)
$48.07

No
Picture
Allis Chalmers Rod Bearing Set, .020
- .020 inch. For tractor models W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). (Part No: CRK-AW-020)
$48.07

Allis Chalmers Rod Bearing Set, Std
- With Journals measuring 1.937 inches. Connecting rod bearing set. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Part No: CRK-D10G)
$50.38

Allis Chalmers Rod Bearing Set, .010
- Connecting rod bearing set. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Part No: CRK-D10G-010)
$50.38

Allis Chalmers Rod Bearing Set, .020
- Connecting rod bearing set. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Part No: CRK-D10G-020)
$52.50

No
Picture
Allis Chalmers Rod Bearing Set
- Rod Bearing Kit. Std. size, 175 CID, 4 cylinder diesel engines, 3-9\16 Std. bore. For model D15. (Part No: CRK-D15D4)
$61.16

No
Picture
Allis Chalmers Rod Bearing Set
- Rod Bearing Kit. .002, 175 CID, 4 cylinder diesel engines, 3-9\16 inch Std. bore. For tractors: D15. (Part No: CRK-D15D4-002)
$62.12

No
Picture
Allis Chalmers Rod Bearing Set
- Rod Bearing Kit. .010, 175 CID, 4 cylinder diesel engines, 3-9\16 inch Std. bore. For tractors: D15. (Part No: CRK-D15D4-010)
$61.16

No
Picture
Allis Chalmers Rod Bearing Set
- Rod Bearing Kit. .020, 175 CID, 4 cylinder diesel engines, 3-9\16 inch Std. bore. For tractors: D15. (Part No: CRK-D15D4-020)
$61.16

Allis Chalmers Rod Bearing Set, Standard
- Standard, connecting rod bearing set. For tractor models CA, WD45D, D17D, D19D with 6BD23 or DA262 6 cylinder engine. (Part No: CRK-D17D6)
$93.44

No
Picture
Allis Chalmers Rod Bearing Set, .002
- Connecting rod bearing set. .002 inch, For tractor models CA, WD45D, D17D, D19D with 6BD23, DA262, 6 cylinder engine. (Part No: CRK-D17D6-002)
$91.99

No
Picture
Allis Chalmers Rod Bearing Set, .010
- Connecting rod bearing set. .010 inch. For tractor models CA, WD45D, D17D, D19D with 6BD23, DA262, 6 cylinder engine. (Part No: CRK-D17D6-010)
$93.44

No
Picture
Allis Chalmers Rod Bearing Set, .020
- Connecting rod bearing set. .020 inch. For tractors: CA, WD45D, D17D, D19D with 6BD23, DA262, 6 cylinder engine. (Part No: CRK-D17D6-020)
$93.44

Allis Chalmers Push Rod Cover Gasket
- For tractors: WD, WD45. Both with gas engines. (Part No: 70218604)
$8.88

Allis Chalmers Bushing, Connecting Rod
- FOR AD3. 152 Perkins diesel. (Part No: 31134151)
$2.97

No
Picture
Allis Chalmers Pushrod
- For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 31434307)
$4.31

Allis Chalmers Bolts, Conn Rod
- For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 32762144)
$3.82

No
Picture
Allis Chalmers Rod Bearing Set, 152 Diesel, .030
- For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 85036C)
$9.55

Allis Chalmers Rod, Reconditioned
- Connecting Piston rod fits N62 engine in model G. Casting number is N62A400. (Part No: R1202415)
$113.87

No
Picture
Allis Chalmers Rod Bearing Pair, .030 or .060
- Single Rod Bearing (4 required). For tractor models B, C, CA, CB, CE, IB, RC all with 125 CID gas engine. Available in .030 or .060. Please specify size in comments section when ordering. (Part No: CB-179P)
$24.04

Allis Chalmers Tie Rod End, LH
- A=3.500 inch, B=13\16 inch diameter. 18 right hand thread. For tractor models B, C. (Part No: 70207726)
$50.07

Allis Chalmers Tie Rod End, RH
- A=3.500 inch, B=13\16 inch 14 right hand thread. For tractor models B, C. (Part No: 70207725)
$46.53

Allis Chalmers Tie Rod
- 15.720 inches long from zerk to end, 1.125 inch diameter. For tractor models 170, 175 with roll shift front axle. (Part No: 70256144)
$89.78

Allis Chalmers Sliding Rod
- 14.750 inches long, 1.125 inch outside diameter. For tractor models 170, 175 with roll shift front axle. (Part No: 70256148)
$89.38

Allis Chalmers Tie Rod Tube Assembly
- 36.00 inches long, 1.140 inch inside diameter. For tractor models 170, 175 with roll shift front axle. (Part No: 70256149)
$204.50

Allis Chalmers Tie Rod End, Long
- A = 15.750 inches, B = .789 inches. For tractor models 5045, 5050, (400, 480, 500, 540, 550, 600, 640 all with 2WD front axle). (Part No: 72090710)
$37.30

Allis Chalmers Tie Rod End
- 20 mm adjustment thread, A= 3.156 inch, B= M20 1.0 right hand thread. For tractor models 5045, 5050. (Part No: 72090115)
$27.68

Allis Chalmers Tie Rod
- 17.50 inches long, 1.125 inch diameter, 7 inch vertical holes. For tractor models 6060, 6070. (Part No: 70263033)
$72.48

Allis Chalmers Tie Rod Tube
- 16.75 inches long, 1.12 inch diameter. For tractor models 6060, 6070. (Part No: 70263034)
$68.59

Allis Chalmers Tie Rod End
- 4.187 inch long from zerk to end, M24 x 1.5 right hand thread. For model 6080 serial number up to 6235 with FWA. (Part No: 72093532)
$61.55

Allis Chalmers Tie Rod End
- 4.187 inch long from zerk to end, M24 x 1.5 right hand thread. For model 6080 serial number 6235 and up with FWA. (Part No: 72094252)
$62.36

Allis Chalmers Tie Rod, Outer
- 21.00 inches long from zerk to end, 1.50 inch diameter. For tractor models 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070 all with heavy duty axles. (Part No: 70269353)
$62.65

Allis Chalmers Tie Rod, Inner
- 4.946 inches long from zerk to end, 1.125 inch diameter. For tractor models 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070 all with heavy duty axles. (Part No: 70265527)
$35.04

Allis Chalmers Tie Rod End
- 4.875 inches long from zerk to end, M30 x 1.5 thread. For tractor models 8010, 8030, 8050, 8070 all with FWA. (Part No: 4311552)
$58.88

Allis Chalmers Lift Rod Trunnion
- For tractor models D10, D12, D15. (Part No: 70234884)
$13.47

Allis Chalmers Connecting Rod
- For tractor models (D19 gas or diesel), (WD45, D17 diesel) all with casting number 4500141. (Part No: R1201490)
$210.60

No
Picture
Allis Chalmers Connecting Rod
- For model 160 with casting number 31337220. (Part No: R1202068)
$114.05

No
Picture
Allis Chalmers Connecting Rod
- For tractor models 180, 185, 190 all gas or diesel with casting number 4020888. (Part No: R1202381)
$106.67

No
Picture
Allis Chalmers Connecting Rod
- For tractor models 200, 6060, 6080 diesel with casting number 4007878. (Part No: R1203470)
$129.66

No
Picture
Allis Chalmers Connecting Rod
- For tractor models 7060, 7080 all diesel with casting number 4036181. (Part No: R1203702)
$192.58

No
Picture
Allis Chalmers Connecting Rod
- For tractor models 8050, 8070 both diesel with casting # 4036541. (Part No: R1202423)
$137.28

No
Picture
Allis Chalmers Rod Bearing Set, 152 Diesel, Std
- For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 85036)
$10.19

No
Picture
Allis Chalmers Rod Bearing Set, 152 Diesel, .010
- For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 85036A)
$10.19

No
Picture
Allis Chalmers Rod Bearing Set, 152 Diesel, .020
- For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Part No: 85036B)
$10.19

No
Picture
Allis Chalmers Rod Bearing, .030
- Individual connecting rod bearing. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Part No: CB-781AL-030)
$21.44

No
Picture
Allis Chalmers Rod Bearing, .040
- Individual connecting rod bearing. For tractor models D10, D12, D14, D15 all with 138, 149 or 160 CID 4 cylinder gas engine. (Part No: CB-781AL-040)
$26.52

Allis Chalmers Brake Rod Return Spring
- This Brake Rod Return Spring fits Allis Chalmers WD, WD45. It is 6-5\8 inches long. Two used per tractor. Sold individually. Replaces original part numbers 222670 and 70222670. (Part No: 70222670)
$13.90

Allis Chalmers Governor Rod Linkage Spring
- Distributor or Magento Ignition, overall length 3-5\8 inch. For tractor models B, IB, C, CA, D10, D12, D14, D15, I40, I60, I600, RC. (Part No: 70212321)
$13.13

Allis Chalmers Starter Rod
- For model G. Length 21 3\4 inches. Replaces: 70800110, 800110 (Part No: 800110)
$24.70

Allis Chalmers Front Weight Anchor Rod
- 7-3\4 inches overall length. HOLDS UP TO 3 FRONT WEIGHTS. For tractor models: RC, WC, WD, WD45 Gas or LP Only, (will not Fit WD45 DIESEL), WF. Replaces: 70227275, 227275227275. (Part No: 227275)
$16.34

Allis Chalmers Front Weight Anchor Rod
- For tractor models: RC, WC, WD, WD45 gas and LP, WF. 9-1\4 inches overall length, HOLDS UP TO FOUR 22727 FRONT WEIGHTS. Replaces: 70236047, 236047. (Part No: 236047)
$18.76

No
Picture
Allis Chalmers Rod Bearings, Early
- For the early models with 2 inch journals. Only available in Standard. For tractor models W, W25, WC, WD, WD45, WF. Engine: 201 CID Gas This is 1 pair for 1 rod. Order 4 for complete engine. Oversize of .005 may be available.... call for availability. (Part No: 70223619)
$25.73

Allis Chalmers Pushrod
- Fits D10, D12, D14, D15 (with 138 CI, 149 CI, 160 CI gas\LP engines. Industrial: 500, 510, 512, 514, 521, 610, 612, 614, 615, 621, H3, I40, I400, I60, I600 (with 138 CI, 149 CI, 160 CI gas\LP engines) Replaces: 70227633, 227633 9.233 inches in length, 0.270 inches in diameter. (Part No: 70227633)
$22.75

Allis Chalmers Pushrod
- Pushrod, new. Sold individually. 11.017 inch overall length, 0.314 inch outside diameter. D17, WC, WD, WD45, WF, 170, 175 (with 201 CI, 226 CI gas\LP engines). Replaces: 70203018, 203018. (Part No: 70203018)
$22.27

Allis Chalmers Throttle Rod
- This new Throttle Rod fits an Allis Chalmers G tractor. It is 45-1\4 inches over all and powder coated AC Orange. It replaces original part numbers 70800152 and 800152. (Part No: 70800152)
$18.50

Allis Chalmers Throttle Rod Bracket
- The new throttle rod bracket fits an Allis Chalmers G tractor. It replaces original part numbers 800302 and 70800302. (Part No: 70800302)
$12.75

Allis Chalmers Governor Control Rod Spring
- This Governor Control Rod Spring fits the Allis Chalmers G tractor. It is has a 2-1\2 inch overall length and an 11\16 inch outside diameter. It replaces original part numbers 800248, 70800248. (Part No: 70800248)
$7.50

Allis Chalmers Brake Rod Return Spring
- This Brake Rod Return Spring is 9-9\16 inches long. It fits an Allis Chalmers G and replaces original part numbers 800013 and 70800013. Two used per tractor. Sold individually. (Part No: 70800013)
$24.75

Allis Chalmers Tie Rod Assembly
- This new Tie Rod Assembly is used on Allis Chalmers 5045 and 5050. It also fits Long 310, 350, 360, 445, 460, 460V, 510, 550, 560, 610 when using TX10817 tie rod assembly. It replaces Allis Chalmers part number 72093230 (Part No: 72093230)
$90.39

Allis Chalmers Pushrod
- This Pushrod is used in Allis Chalmers B, C, CA, IB and RC tractors as well as (60 and 66 combines) and (60H, B125 power units). It is 9.828 inch length, 0.280 inch diameter. Replaces original part numbers 207426, 70207426. (Part No: 70207426)
$22.50

Allis Chalmers Connecting Rod Bolt and Nut Assembly
- This Connecting Rod Bolt and Nut Assembly is used on Allis Chalmers 160 and 6040 models with Perkins Engines. Replaces original part numbers 2130015, 27124, 72080101, 7H2975, 95250, 995250. (Part No: 957E6215)
$2.91


Click here to see parts by model







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2015 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.