(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Allis Chalmers Tractor Clutch


Click here to see parts by model


Allis Chalmers Clutch Kit
- Tru-Power Clutch Kit. Kit contains remanufactured pressure plate assembly, 11 inch, remanufactured disc, 10 spline, 1-1\4 inch hub, woven disc; new release bearings and pilot bearing. For Tractors D17 to serial number 75001. NO Core. (Part No: 70229344K)
$294.85

Allis Chalmers Clutch Kit
- Kit contains: Remanufactured pressure plate assembly, 11 inch, 2 inch hub, 30 spline, remanufactured disc, 10 spline, 1-1\4 inch hub, woven disc, new release bearing and pilot bearing. For Tractors D17 Series IV serial number 75001 and up. Add $25.00 Core charge. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. ALSO Replaces D242572K. (Part No: 70242572NC)
$267.72

Allis Chalmers Clutch Kit
- Tru-Power Clutch Kit. Kit contains remanufactured pressure plate assembly, 11 inch, remanufactured disc, 10 spline, 1-1\4 inch hub, woven disc; new release bearing and pilot bearing. For Tractors D19. There is also a $25.00 refundable core charge. (Part No: 70241253K)
$259.91

Allis Chalmers Clutch Kit
- Tru-Power Clutch Kit. Kit contains remanufactured pressure plate assembly, 12 inch, remanufactured disc, HD, 10 spline, 6 Pad, 1-1\4 inch hub, new release bearing and pilot bearing. For Tractors 180, 185, 190. Refundable $20.00 Core Charge will be added to your order. (Part No: 70280462K)
$399.21

Allis Chalmers Clutch Kit
- Tru-Power Clutch Kit. Kit contains remanufactured pressure plate assembly, 12 inch remanufactured disc, HD, 10 spline, 6 Pad, 1-1\4 inch hub, new release bearing and pilot bearing. For Tractors 190XT, 200. NO CORE CHARGE. (Part No: 70255689NC)
$462.80

No
Picture
Allis Chalmers PTO Clutch Seperator Plate
- For tractor models (180, 185 all use 6), (190, 190XT, 190XT III, 200 all use 8), (4W-220, 7045, 7060, 7080, 7580, 8050, 8070 all use 5), (4W-305, 8550 both use 7), (7000 use 3), (7010, 7020, 7030, 7040, 7050, 8010, 8030 all use 4). PTO Clutch Seperator Plate. (Part No: 70265486)
$21.75

Allis Chalmers Clutch Inspection Plate
- Fits B, C, CA, IB, D10, D12, D17, D19, WC, WF, 160, 170, 175. (Part No: 208465)
$14.25

Allis Chalmers Clutch, Adjusting Piston
- For tractor models 180, 185, 190, 190XT III, 200 serial number 9070 and up. (Part No: 70257507)
$93.54

Allis Chalmers Clutch Disk, 8.5 Inch
- SOLID, spline diameter 1.125 inch, 10 spline. For tractor models B, B125, B15, C, CA, IB. (Part No: 70226729)
$70.09

Allis Chalmers Clutch Disc
- This 11 inch clutch disc is 4 button, spring loaded, 10 spline, 1.250 inch spline diameter. For tractor models 170, 175, (D17 serial number 75001 and up). (Part No: 70247859)
$110.46

No
Picture
Allis Chalmers Clutch Disc, Organic
- 8-1\2 inch, Remanufactured, spring loaded, .9375 spline diameter, 13 spline. For tractor models 5020, 5030. (Part No: 3435019M93)
$76.89

Allis Chalmers Release Bearing, Clutch
- For tractor models 5020, 5030. Measures 0.770 inches outside diameter, 2.905 inches inside diameter, width 0.703 inches. Replaces 72098054. (Part No: N3764)
$19.01

No
Picture
Allis Chalmers Clutch Seal, Rear Engine
- For tractor models WD, WD45. (Part No: 70222540)
$19.12

Allis Chalmers Clutch Kit
- Kit contains remanufactured pressure plate assembly, 8-1\2 inches, remanufactured disc, 10 spline, 1-1\8 inch hub, woven disc; new release bearings. For Tractors B, C, CA. (Part No: 70226262K)
$227.70

Allis Chalmers Clutch Disk, 8.5 Inch
- New Spring Loaded Disc is 10 spline with 1.125 inch diameter. (Part No: 70226730)
$83.49

Allis Chalmers Clutch Disc, Solid
- 6.50, 10 spline, .9375 spline dia. For model G. Spoked like original. (Part No: 70800662)
$33.75

Allis Chalmers Clutch Disc
- 10 inch diameter, 1-1\4 inch hub, 10 spline. For tractor models WC, WD, WD45, WF. (Part No: 70226764)
$96.53

Allis Chalmers Clutch Disc, 9 Inch
- This clutch disc has 1-1\8 hub, 10 spline, spring type. For tractor models B, C, CA, (D10 up to serial number 3500), (D12 up to serial number 3000), D14, D15. This is not interchangeable with A44512 as the hub is different. (Part No: 70232239)
$123.47

Allis Chalmers Clutch Disc
- This Remanufactured 11 inch diameter, woven, 1-1\4 inch hub, 10 spline. For tractor models D17, D19, 170, 175. (Part No: 70241255)
$112.54

Allis Chalmers Clutch Disc
- Remanufactured 12 diameter, 1-1\4 hub, 10 spline. Tractors: 180, 185, 190. (Part No: 70247071)
$155.04

Allis Chalmers Clutch Disc
- Remanufactured 12 diameter, 1-5\16 hub, 20 spline. For tractor models 7010, 7020, 7040, 7045, 7060, 8010, 8030, 8050, 8070. (Part No: 70268718)
$116.51

Allis Chalmers Final Drive Clutch Knob
- Plastic Knob, 3\8 inch fine thread. For model CA. (Part No: R4572)
$5.25

Allis Chalmers Clutch, 2 Groove
- For tractor models 9435, 9455, (9630 serial number 921001 and up), 9635, (9650 serial number 941001 and up), 9655, (9670 serial number 961001 and up), 9675, (9690 serial number 981001 and up), 9695, 9815. (Part No: 72507683)
$145.45

Allis Chalmers Clutch Finger Kit
- This Clutch Finger Kit is for the Main Clutch (11 inch, 6 Finger). Fits most Fiat built tractors. Models 5040, 5045, 5050, 5060, 6060, 6070. Replaces OEM part numbers 9959900 and 9962518. (Part No: S.62177)
$66.86

Allis Chalmers PTO Clutch Finger Kit
- This PTO clutch finger kit has 90 degree fingers. (11 inch, 6 Finger). Fits most Fiat built tractors. Models 5040, 5045, 5050, 5060, 6060, 6070. Replaces OEM part number 9959899. (Part No: S.62178)
$66.86

Allis Chalmers CLUTCH, PRESSURE PLATE
- Pressure Plate (7 1\4 inch) Diaphram Type. For Deutz\Allis models 5015, 5215. replaces 72100989, 72101525, 72100762, 72101481 (Part No: S.72822_)
$55.19

Allis Chalmers Clutch Disc
- This is an 11 inch Clutch Disc. It has a 1.25 Inch, 10 spline center hub. TRACTOR: D17 (up to serial number 75000). (Part No: 70232241)
$97.10

Allis Chalmers Clutch Inspection Cover Plate
- For model G. Replaces: 800388, 70800388. Color of primer finish may vary. Bolt holes are 8 inches center to center. (Part No: 800388)
$30.15

Allis Chalmers Hand Clutch Lever
- For model CA. Includes bolt and knob Replaces 225582 lever, 912195 bolt, 206456 knob. (Part No: 206456)
$84.10

Allis Chalmers Clutch Inspection Cover Plate
- With spring steel clips, powder coated. For tractor models D14, D15. (Part No: 70227610)
$14.25

Allis Chalmers PTO Safety Clutch, 40 HP
- 1-3\8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164)
$235.29

No
Picture
Allis Chalmers Clutch Disk - 11 Inch
- 14 Spline, 1.563 inch hub, organic, solid. For tractor models 5040, 5045, 5050, 6060. (Part No: 72093924)
$39.00

No
Picture
Allis Chalmers Clutch - Sanden Syle
- With 5.22 inch pulley, double pulley. For tractor models 6670, 6690, 7600, 7630, 8630, 9130, 9150, 9630, 9650, 9670, 9690. (Part No: 72162176)
$109.02

No
Picture
Allis Chalmers Clutch Assembly - 13 Inch
- This Complete Assembly Includes The Pressure Plate, (2) Clutch Discs & Center Plate. Replaces 30-3085589, 72163225. For tractor models 9170, 9190, 9435, 9455 (Part No: 72508717)
$1108.11

No
Picture
Allis Chalmers Clutch Disc 13 Inch
- 6 Button, Spring Loaded. 1 3\4 inch hub, 27 splines. For model s:9170, 9190, 9435, 9455. (Part No: 72161807)
$159.39

No
Picture
Allis Chalmers PTO Clutch Drive Plate
- 6 inch outside diameter, 3.625 inch inside diameter, 28 teeth. For tractor models (quantity used): 180 (6), 185 (6), 190 (8), 190XT (8), 190XT III (8), 200 (8), 4W220 (5), 4W305 (7), 7000 (3), 7010 (4), 7020 (4), 7030 (4), 7040 (4), 7045 (5), 7050 (4), 7060 (5), 7080 (5), 7580 (5), 8010 (4), 8030 (4). (Part No: 70256524)
$25.43

No
Picture
Allis Chalmers Power Director Clutch Plate
- For tractor models D19, 170, 175. (Part No: 70230015)
$137.53

Allis Chalmers Clutch Pedal Return Spring
- This Clutch Pedal Return Spring fits Allis Chalmers B (serial number 101 to 124037), C, CA (Up to serial number 30611), IB (up to serial number 2836). It replaces original part numbers 207941, 225646, 70207941 and 70225646. This Clutch Pedal Return Spring measures 4.300 inches overall length. The body diameter measures 0.750 inch and the wire diameter measures 0.100 inch. (Part No: 70225646)
$13.13

Allis Chalmers Clutch Pedal Return Spring
- This Clutch Pedal Return Spring. Fits Allis Chalmers B (serial number 124037 and up), CA (serial number 30611 and up), D10, D12 (up to serial number 9001), IB (serail number 2836 and up). It replaces original part numbers 226310 and 70226310. It measures 5.573 inch overall length, 0.100 inch wire diameter, 0.750 inch body diameter. (Part No: 70226310)
$13.65

Allis Chalmers Clutch Alignment Tool
- This Clutch Alignment Tool is 15\16 inches x 10 spline. For Allis Chalmers G. (Part No: 900151)
$6.45

Allis Chalmers Brake and Clutch Pedal Shaft
- This new Brake and Clutch Pedal Shaft has an 0.996 inch outside diameter and is 17 1\4 inches in Length. It fits Allis Chalmers WD, WD45, gas and diesel. It replaces original part number 70222650. (Part No: 70222650)
$47.33

Allis Chalmers Clutch Disc
- This is a new Ceramic, four button Clutch Disc, 12 inch, 1-1\2 inch hub, 23 spline. Tractors: 4W220, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070. Replaces 70269728GV, D269728, 70269728. (Part No: 70269728)
$76.18

Allis Chalmers Clutch Disc, 9 inch Organic
- This is a ridged 1.125 inch spline diameter, 10 spline Clutch disc. Replaces: 207784, 70207784. For tractor models B, C, CA, D10, D12, D14, D15, H3, HD3, I500, I600 and IB 207784, 70207784. This part is not interchangeable with 70232239 as the hubs are different. (Part No: A44512)
$30.75

Allis Chalmers Clutch Kit
- Kit includes 9 inch clutch disc (10 spline 1 1\8 inch hub) 70207784, pressure plate 70216965, release bearing 70235079, alignment tool and pilot bearing 6203-2RS. Used on B, C, CA, D10, D12, D14, HD3 Crawler, HD4 Crawler. (Part No: 1612-1008)
$137.93


Click here to see parts by model







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2015 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.