FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers Tractor Bushing

Click here to see parts by model

$photo of Piston Pin Bushing. For 301 CID 6 cylinder 6491-649T series diesel engines. 3-7\8 inch standard bore, 30 degree exhaust valve face angle. For tractor models 7010, 7020, 8010. For 180, 185, 190, 190XT, D21.$
Allis Chalmers Pin Bushing - Piston Pin Bushing. For 301 CID 6 cylinder 6491-649T series diesel engines. 3-7\8 inch standard bore, 30 degree exhaust valve face angle. For tractor models 7010, 7020, 8010. For 180, 185, 190, 190XT, D21. (Item #: 128670, Ref. 74020049) $16.10

No
Picture
Allis Chalmers Piston Pin Bushing - Piston Pin Bushing. For D3400 and D3500 Non Mark II Diesel Engine, 426 CID 6 cylinder. 4-1\4 inch standard bore. For tractors: D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7070, 7080, 7580. For 180, 185, 190, 190XT, D21. (Item #: 159774, Ref. 74025031) $13.58

Allis Chalmers Piston Pin Bushing - For tractor models D15D, D17D, D19 used in 175 and 262 cid diesel engines. Priced Each. If you order 1, you will receive 1 bushing. (Item #: 167306, Ref. 74507127) $15.40

Allis Chalmers Bushing, Connecting Rod - FOR AD3.152 Perkins Diesel. 31134151 (Item #: 128688, Ref. 957E6207A) $2.70

No
Picture
Allis Chalmers Cam Bushing Set - For tractor models (6060, 6080 with D2200 diesel), (801 Cotton Picker, 860, 180, 185, 190, with 301 CID diesel 2800 series engine), (TL-345B, TL-545, 545, 190, 190XT, 190XT III, 200, 7000, with 301 CID diesel 2900 series engine), 7010, 7020, 8010. Replaces 74025025, 74025238. (Item #: 105994, Ref. CB2800) $51.00

Allis Chalmers Spindle Bushing - Used on spindle 70237434, on tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Item #: 110538, Ref. 70211743) $13.00

Allis Chalmers Spindle Bushing, Upper - For tractor models 210, 220, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070, D21. (Item #: 128508, Ref. 70239452) $18.30

Allis Chalmers Spindle Bushing - For tractor models 5020, 5030 with adjustable front. (Item #: 172724, Ref. 72098241) $4.40

Allis Chalmers Spindle Bushing - For model 5040, 5045, 5050 all with adj. front axle. (Item #: 153511, Ref. 72094403) $12.70

Allis Chalmers Spindle Bushing - For model 6140. (Item #: 172634, Ref. 72099662) $15.50

Allis Chalmers Spindle Bushing, Lower - For tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070. (Item #: 128509, Ref. 70267222) $22.00

Allis Chalmers Seat Pivot Bolt Bushing - For model WD up to serial number 127006. Two required per tractor, sold individually. (Item #: 162438, Ref. 70225041) $18.00

Allis Chalmers Piston Pin Bushing - For model G. N62 Continental Gas Engine. Replaces 70800207, 1500022M1, 223-3505, YTP 827998 (Item #: 128598, Ref. 827998) $15.20

No
Picture
Allis Chalmers Hydraulic Cover Bushing - For tractor models 5040, 5045, 5050. (Item #: 179921, Ref. 72089163) $8.50

No
Picture
Allis Chalmers Front Axle Bushing - For tractor models 160, 170, 185, 9130, 9150, 9170, 9190. (Item #: 172694, Ref. 72160032) $32.30

Allis Chalmers Spindle Bushing - This spindle bushing is used on spindle 70237073 in models CA, D10, D12. Replaces: 205601, 70205601. (Item #: 100617, Ref. 2N3109) $4.00

Allis Chalmers Pilot Bushing - This is a Bushing, not a bearing. Please verify before ordering. Measures 0.815 Inch Outside Diameter, 0.625 Inch Inside diameter, and 1.000 Long. Serviceable for part numbers: 70800312, 800312. You may have to shorten to 0.895 inches. (Item #: 155743, Ref. 251266R1) $5.90

$photo of This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7\8 Inside Diameter, and 1-1\8 Outside Diameter and is 1-3\4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374$
Allis Chalmers Lift Arm Bushing - This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7\8 Inside Diameter, and 1-1\8 Outside Diameter and is 1-3\4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374 (Item #: 108626, Ref. BUSH04) $2.60

Allis Chalmers Governor Gear Bushing - Mounted in front of the engine block, this Governor Gear Bushing measures: 1.881 inches outside diameter, 0.564 inches wide, and 1.752 inches inside diameter. It is used on Allis Chalmers B, C, CA, D10, D12, D14, D15, IB, RC, D272. Replaces 207466, 210689, 70210689 (Item #: 165362, Ref. 70210689) $23.40

Allis Chalmers Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Item #: 109602, Ref. 72696R1) $2.30

Allis Chalmers Clutch Pilot Bushing - Inside diameter .883 inch, outside diameter 1.125 inch, thickness .995 inch. For the following models: B, IB, C, CA, D10 (up to serial number 3501), D12 (up to serial number 3001), D14, D15, and H3. Replaces 206968, 228188, 228255, 70206968, 70228188, 70228255. (Item #: 122000, Ref. 364527R91) $9.30

Allis Chalmers Upper Steering Wheel Shaft Bushing - Inside diameter .883 inch, outside diameter 1.125 inch, thickness .995 inch. For the following models: D14, D15 (2 used), D17 (2 used), D19 (2 used), D21, I600 (2 used), 180, 185, 190, 190XT, 200, 210, 220, 600. Replaces 206968, 228188, 228255, 70206968, 70228188, 70228255. (Item #: 122000, Ref. 364527R91) $9.30

Allis Chalmers Power Shift Pilot Bushing - Inside diameter .883 inch, outside diameter 1.125 inch, thickness .995 inch. For the 7060. Replaces 206968, 228188, 228255, 70206968, 70228188. 70228255. (Item #: 122000, Ref. 364527R91) $9.30

$photo of <UL> <li>For Allis Chalmers tractor models WD, WD45<\li> <li>Replaces Allis Chalmers OEM number 70222447, 222447<\li> <li>0.900 inside diameter<\li> <li>1.009 outside diameter<\li> <li>0.057 thick<\li> <li>0.987 length<\li> <\UL>$
Allis Chalmers Steering Shaft Bushing - For Allis Chalmers tractor models WD, WD45 Replaces Allis Chalmers OEM number 70222447, 222447 0.900 inside diameter 1.009 outside diameter 0.057 thick 0.987 length (Item #: 112464) $24.50

$photo of <UL> <li>For Allis Chalmers tractor models 4W-220, 8030, 8050, 8070<\li> <li>Compatible with Allis Chalmers Engine (s) 670H (diesel), 670I (diesel), 670T (diesel) <li>Replaces Allis Chalmers OEM number 74025030, 74036271<\li> <\li> <li>Compatible with Gleaner Combine (s) L2, L3, N5, N6, R5, R6<\li> <li>1.750 piston pin<\li> <\UL>$
Allis Chalmers Piston Pin Bushing - For Allis Chalmers tractor models 4W-220, 8030, 8050, 8070 Compatible with Allis Chalmers Engine (s) 670H (diesel), 670I (diesel), 670T (diesel) Replaces Allis Chalmers OEM number 74025030, 74036271 Compatible with Gleaner Combine (s) L2, L3, N5, N6, R5, R6 1.750 piston pin (Item #: 159775) $11.40

No
Picture
Allis Chalmers Spindle Bushing - For Allis Chalmers tractor models CA, D10, D12 Replaces Allis Chalmers OEM number 70205601 Inside Diameter: 1.2550 Outside Diameter: 1.3790 Width: 1.25 (Item #: 173329) $14.70

No
Picture
Allis Chalmers Main Shaft Bushing, Used - For Allis Chalmers tractor models D19, 170, 175Replaces Allis Chalmers OEM nos 70235255Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 453869) $50.01

Click here to see parts by model

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy