(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Allis Chalmers D17 Tractor Parts

[ Show Pictures ]

[Categories]   [All Allis Chalmers Models]   [Print]  


Brakes
Brake Band - Sold Individually, 4 required per tractor. For tractor models 170, 175, 180, 185, 190, 190XT, 190XT III, (200 SN# less than 4000), (D17 SN# 42001 and above), D19, D21. Also replaces 70276940, 70235610, 70277438. (Part No: 70277379)
$40.47

Brake Drum - 1.500" I.D, keyway, 2.860" Wide, 7.875" O.D. For tractor models WD, WD45, WD45D, D17. (Part No: 70232585)
$88.70

Brake Drum Assembly - For D17 SN# 42001 and up, 170, 175, 180, 185. Brake Drum Assembly. (Part No: 70237418)
$101.08

Brake Friction Plate - For tractor models 170, 175, 180, 185, D17. (Part No: 70237215)
$95.44

Brake Lining - Lining kit for disc brakes. Includes lining and rivets for one disc and one drum. Non-Asbestos. SN# 42001 & up, D17 Series IV. For tractor models 170, 175, 180, 185, D17. (Part No: 70237421)
$43.26

Brake Plate Assembly, with Lining - 20 spline, 6.50" dia. For tractor models 170, (D17 SN# 42001 and up). Also Replaces 70237208. (Part No: 70277327)
$146.46

Brake Shoe Anchor Pin - Overall length of 6 5/8 inches and diameter of 3/4 inch. Verify measurements. For tractor models D17 series III, WD, WD45. (Part No: 70232801)
$19.65

Brake Shoe Linings with Rivets - Set of 2 brake shoe linings with rivets for one wheel. For 170, 180, 185, 190, D17 after Serial number 42000, D19, D21. (Part No: BLKAD17)
$30.92

Brake Shoe Linings with Rivets - For tractor models D-17 with SN# up to 42000, WD, WD45, WD45D. This is a set of 2 linnings with rivets for one wheel. (Part No: 70276950)
$18.19

Brake Shoe Return Spring - Spring is 3 3/16 inches overall length and diameter of 3/4 inch. Verify measurements. For tractor models (D17 up to SN# 42000), WD, WD45. Replaces: 70222501, 222501 (Part No: 222501)
$10.50

Front Brake Spring - Fits tractor models D17 (Up to serial number 42000), D19 (Also used as a hydraulic oil control spring on D19 up to serial number 12850.), WD, WD45; Replaces: 70232564, 70222500, 232564, 222500. 3.1354" overall length, .595" O.D., .081" wire diameter. Two used per tractor. Sold individually. (Part No: 70232564)
$6.75

Clutch
Clutch Disc - This 11 inch clutch disc is 4 button, spring loaded, 10 spline, 1.250" spline diameter. For tractor models 170, 175, (D17 SN# 75001 and up). (Part No: 70247859)
$110.46

Clutch Disc - This Remanufactured 11 inch diameter, woven, 1-1/4 inch hub, 10 spline. For tractor models D17, D19, 170, 175. (Part No: 70241255)
$112.54

Clutch Disc - This is an 11 inch Clutch Disc. It has a 1.25 Inch, 10 spline center hub. TRACTOR: D17 (up to SN 75000). (Part No: 70232241)
$97.10

Clutch Inspection Plate - Fits B, C, CA, IB, D10, D12, D17, D19, WC, WF, 160, 170, 175. (Part No: 208465)
$14.25

Clutch Kit - Tru-Power Clutch Kit. Kit contains remanufactured pressure plate assembly, 11 inch, remanufactured disc, 10 spline, 1-1/4 inch hub, woven disc; new release bearings and pilot bearing.. For Tractors D17 to SN# 75001. NO Core (Part No: 70229344K)
$294.85

Clutch Kit - Tru-Power Clutch Kit. Kit contains: Remanufactured pressure plate assembly, 11", 2" hub, 30 spline, Remanufactured disc, 10 spline, 1-1/4" hub, woven disc, new release bearing and pilot bearing. For Tractors D17 Series IV SN# 75001 & up. Add $25.00 Core charge. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. ALSO Replaces D242572K (Part No: 70242572NC)
$319.06

Pilot Bearing - Clutch pilot bearing. For tractor models 170, 180, 190, D17, D19, D21, WD45. (Part No: 70527813)
$8.12

Pressure Plate, 11 - 30 splines, 1.9875" spline diameter, 1.437" flywheel step. For tractor models 170, 175, (D17 SN# 75001 and up). (Part No: 70242572)
$192.49

Release Bearing - For tractors: B, 1B, WC, WF, WD, WD45, WD45D, D10 (SN# 3501 & up), D12 (SN# 3001 & up), D17 (prior to SN# 75000), D19. (Part No: 70204829)
$25.43

Release Bearing - Clutch release bearing. For tractor models 170, 175, 210, 220, 7000, D17, D21. 2.50 Inch Inside Diameter, 4.125 Inch Outside Diameter, 0.870 Inch Width. Replaces: 260803, 70260803 (Part No: N1585)
$17.61

Release bearing - For tractor models 180, 185, 190, 190XT, 200, C, CA, D10 (SN# 3501 & below), D12 (SN# 3001 & below), D14, D15, D17 (SN# 75000 & below), D19, H3 (with 149 engine). 2.0625 inch inside diameter, 3.515 inch outside diameter, 0.870 inch width. Replaces: 211273, 235079, 70211273, 70235079. (Part No: N1087)
$12.33

Cooling System
Fan Belt - Tractor fan belt. For tractor models D17 with gas engine. (Part No: 70229211)
$11.62

Fan Belts - Pair - Tractor fan belts, diesel matched pair prior to 19938, except 117087 thru 117104. For model D17. 1/2" X 45.875" Replaces OEM A76758, 70229559, 70237048, 30-3390144 (Part No: 70229559)
$18.18

Fan Blade - Fan Blade For WC, WD, WD45, D17, D19. Four Blade. (0566R) (Part No: 70235753)
$31.45

Fan Blade, 5 Blade - 17-1/2" diameter, 1-1/16" pilot hole, mounting holes on 1-1/4" centers. For tractor models (170, 175 gas), (D17, D19, WD45 gas or diesel), WC, WF. (Part No: 70240973)
$81.36

Radiator - For model D17 Gas or LP gas. (Part No: 70229702)
$482.72

Radiator Cap, Pressurized - This 4 lb. pressurized cap is for tractor models using a pressurized cap: Late B, C, CA, WC, WD, WD45, WF, D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces 70228545, 70228722, 70228817, 70254891 (Part No: 70254891)
$9.58

Radiator Hose, Lower - 1.50" I.D.. For model D17 with gas engine. (Part No: 70229209)
$9.80

Radiator Hose, Lower - A = 1.50", B = 1.750". For model s:(D17 diesel SN# 38964 and up), (D19 gas). (Part No: 70235356)
$15.03

Radiator Hose, Upper - 1.812" I.D.. For tractor models WD45, (D17 diesel SN# up to 38963). (Part No: 70226893)
$4.06

Radiator Hose, Upper - 1.5" I.D.. For tractor models (D17 diesel up to SN# 38963), WC, WD, WD45, WF. (Part No: 70233153)
$4.47

Radiator Hose, Upper - 1.50" I.D.. For model D17 with gas engine. (Part No: 70229636)
$9.51

Radiator Hose, Upper - 1.750" I.D.. For tractor models (D17 diesel SN# 38964 and up), (D19 diesel with 4-15/16" filler neck). (Part No: 70235361)
$14.60

Thermostat - 180 degree. For tractor models 170, 175, B, C, CA, D14, D17, WD, WD45. All with gas engines. (Part No: 70229927)
$18.63

Thermostat - For tractor models 180, 185, 190, 190XT, 190XT III, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 860, 880, (D17 SN# 119938 and up), (D19 diesel), D21. Replaces 74025103 (Part No: EAF8575BWG)
$9.53

Thermostat - This 160 degree long neck thermostat fits the following tractor models: B with engine serial number 126210 and up, when equipped with water manifold bypass. Models: C and CA with engine Serial number 195136 and up, when equipped with water manifold bypass. Models: D10, D12, D14, D15, D17, I40, I400, I60, I600, WD45, 170, and 175 gas or LP. This thermostat does not come with a gasket. (Part No: R1852)
$39.45

Thermostat Housing Bypass Cover - This new Thermostat Housing Bypass Cover fits Allis Chalmers D17, WD45, 170, 175 all with Gas. It Replaces: 226319, 227017, 231440, 262804, 70226319, 70227017, 70231440, Housing: 70262804 (Part No: 70262804)
$48.30

Water Pump - 4.938" filler neck. For tractor models (D17 series III diesel), (D19 gas and LP). Replaces 4516959. (Part No: 74517362)
$135.79

Water Pump Pulley - This pulley is for tractor models (D17 series III with diesel engine), D19. (Part No: 74513381)
$49.80

Water Pump with Single Pulley - Replaces 129433 casting # 229465 . For tractor models 170, 175, D17 all with gas engines. (Part No: 79003710)
$107.96

Water Pump, with Double Pulley - For tractor models (D17 with diesel eng SN# up to 119938 except between SN# 117087-117104), WD45 with diesel engine. (Part No: 74517291)
$157.15

Decals and Emblems
Decal Set - Decal Set for Allis Chalmers Model D17 (1957-1960 only). (Part No: R1869)
$43.94

Decal Set - Complete set (With Oval Model Number) for Allis Chalmers Model D17. (Part No: R2545)
$52.73

Decal Set - Complete set for Allis Chalmers Model D17 Diesel only. (Part No: R2546)
$57.13

Decal Set - Decal Set for Allis Chalmers Model D17(Series IV only). Made of Vinyl. (Part No: R1270V)
$149.04

Decal Set - Complete set for Allis Chalmers Model D17(Series IV Diesel Only). Made of VINYL. (Part No: R1872V)
$149.04

Decal Set, Chassis - For model D17 includes model numbers for tractor models with metal nameplates. (Part No: R4638)
$34.18

Decal Set, Complete - Complete set with chrome. For model D17 series IV gas. (Part No: R0514)
$395.91

Decal Set, Complete - For model D17 diesel 1957-1960 with black bar grill. (Part No: R5232)
$48.01

Decal Set, Vinyl - Complete set for Allis Chalmers Model D17(Series III Only). (Part No: R1871V)
$380.75

Emblem - For tractor models Late D15, D17, E-3 Gleaner. (Part No: 246724)
$57.91

Emblem, Hood, AG Tractor - Qty (1). This is a raised-letter hood side emblem for Allis-Chalmers models D10, D12, D14, D15, and D17. This metal emblem has the Allis-Chalmers creme background with black letters. THIS SINGLE EMBLEM COVERS ONLY 1 SIDE OF TRACTOR. (Part No: 70233854)
$69.30

Emblem, Hood, INDUSTRIAL Tractors - Qty (1). This is a raised-letter hood side emblem for INDUSTRIAL Allis-Chalmers models D10, D12, D14, D15, and D17. This metal emblem has a black background with unpainted letters. Please Note: picture does not show correct color. THIS SINGLE EMBLEM COVERS ONLY 1 SIDE OF TRACTOR. (Part No: R4520)
$70.88

Power Steering Emblem - This is a Metal Power Steering Emblem use on models D14, D15, D17. (Part No: 232712)
$58.00

Drive Train
Bearing Cone - Rear axle outer cone, Timken number 29685. For tractor models 190, 190XT, D17. (Part No: 70057006)
$41.17

Bearing Cup - Rear axle outer cup, Timken number 29620. For tractor models 190, 190XT, D17. (Part No: 70057005)
$23.62

Bearing Cup - Rear axle inner cup, Timken number 3920. For tractor models 190, 190XT, D17. (Part No: 70202584)
$14.89

Control Lever Knob - Three knobs used per tractor. Fits D10, D12, D14, D15, D17, D19. Also Replaces 70228215. (Part No: 228215)
$4.50

Final Drive Pan Gasket - This Final Drive Pan Gasket Fits: D17, WC, WD, WD45; It replaces original part numbers 247874 and 70247874. (Part No: 70247874)
$12.75

First and Second Mainshaft Gear - For tractor models D17, 170, 175. First and Second Mainshaft Gear. (Part No: 70232532)
$161.06

Gear Shift Boot - For tractor models D17, D19, 170, 175, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070. (Part No: 233767)
$12.38

Gear Shift Knob - This Gear Shift Knob has a 0.400 inch inside diameter hole. Fits B, C, WD, WD45, D10, D12, D14, D15, D17, D19, D21. Replaces: 226023, 70226023 (Part No: 226023)
$5.48

Input Shaft - This Input Shaft is for tractor models D17, D19, 170, 175. Transmission Input Shaft is 21 - 20 - 8 Tooth. 9.92 inches in total length. (Part No: 70239530)
$186.62

REVERSE GEAR - For D17, 180, 185, 190, 190XT, 200, (170, 175 without shutle clutch). Reverse Gear. (Part No: 70232529)
$151.57

Second Mainshaft Gear - For tractor models D17, 170. Second Mainshaft Gear. (Part No: 70232408)
$190.05

Third Gear - For tractor models D17 SN# 24001 to 71326, D19 up to SN# 15151, 170, 175. Third Gear has 27 / 8 Teeth. VERIFY TOOTH COUNT. (Part No: 70240940)
$253.98

Third and Fourth Gear Coupling - For D17, D19, 170, 175, (WD, WD45 both SN# 127007 and up). Third and Fourth Gear Coupling (Part No: 70232452)
$105.47

Third gear, Countershaft - For tractor models 170, 175, (190, 190XT, 190XT III all up to SN# 9001), (D17 SN# 24001 and up), (D19 SN# 15151 and up). (Part No: 70247728)
$178.32

Electrical System
Distributor Cap - For 4 cylinder Clip Type Cap For Delco Distributors:: B, C, (CA engine SN# CE-149840 and up), D10, D12, D14, D15, D17, (WC, WD, WD45 SN# 136318 and up). Replaces Delco 811735, and 70225733. (Part No: 1750411M91)
$6.63

Distributor Dust Cover - Fits early delco distributor with clip held cap. For tractor models B, IB, C, G, CA, WD, WD45, WC, WF, D10, D12, D14, D15, D17, D19, RC. Replaces 225734. (Part No: 1900119)
$6.75

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. fits tractor models B, C, IB, RC, WC, WD, WF, CA, D10, D12, D14, D17, D19, G, WD45, D15, H3, I40, I400, I500, I60, I600 With 1112461, 1112601, 1112655 1111411 or 1112607 Delco Distributor & Clip Held Cap. Replaces: bushing: 225773, 70225773, 0.005" shim washer: 225797, 70225797, 0.034" washer: 250977, 70250977, 0.010" shim washer: 4050123, 74050123 (Part No: ABC3007)
$22.50

Distributor, Rebuilt - For tractor models D10, D12, D14, D15, D17 all built between 1959 and 1965. Add $75.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1112593)
$157.71

Distributor, Rebuilt - Complete remanufactured distributor for Allis Chalmers D17 tractors with Delco distributor 1112584. A refundable $80.00 core charge will be added to your invoice. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Also NOTE: Note that if the core is not a complete and good core, part or all of the core charge will not be refunded. Typically, most cores need a shaft replacement and the cost of the shaft will be deducted from the core charge. This is usually $30 (Part No: 1112584)
$157.71

Electronic Ignition Conversion Kit, 12 Volt Negative Ground - Replaces points & condenser with an electronic module. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increase horsepower, improve fuel economy. Compatible with all 12-volt negative ground systems and 6-volt systems that have been converted to 12-volt negative ground. For tractor models G, B, C, CA, WC, WD, WF, WD45, D10, D12, D14, D15 and D17. NOTE: On those models that use a Distributor Dust Shield, you may be required to drill a larger hole in the Dust Cover for the Electronic Parts to fit properly. (Part No: 1142)
$86.68

Generator, 12 Volt - Pulley not included. For tractor models D10, D12, D14, D15, D17, D19 all from 1959-1965. Replaces 1100305. (Part No: 1100332)
$260.52

Generator, 12 Volt - Pulley not included. For tractor models D10, D12, D15, D17, D19 all from 1961-1964. Replaces 1100426. (Part No: 1100321)
$377.55

Generator, Delco Type, 12 Volt - For tractor models D, D10, D12, D14, D15, D17, D19, DD, H3, HD3, RT40. Replaces Delco # 1100305. Remanufactured. Refundable $50.00 core charge will be added to your order. (Part No: TG-59)
$232.53

Ground Strap - Battery cables, ground. For tractor models D14, D17. (Part No: 70229941)
$9.13

Ignition Kit, Delco Clip-Held Cap Distributor - Ignition kit For Delco distributor with CLIP held cap. Contains points, condenser, and rotor. For: A, B, CA, G, WD, WD45, D10, D12, D14, D15, D17, D19. (Part No: ATK1DCR)
$7.34

Key Switch - 5 terminal, with keys and jam nut. For tractor models D10, D12, (D14 from SN# 9500 and up), (D15 up to SN# 9000), (D17 up to SN# 75000), D19, D21. Replaces 235785, 231705, 233320, 229201, 234356 70235785, 70231705, 70233320, 70229201, 70234356. (Part No: 230163)
$45.29

Key Switch - 5 terminal, 3 position, with keys. For tractor models 170, (D15 from SN# 9001 and up with Indak switch), (D17 from SN# 75001 and up), 175, 180, 185, 190, 190XT, 200, 210, 220. Replaces 241965. (Part No: 233759)
$23.25

Solenoid Switch - Solenoid and manifold heater switch, 12-volt. Super sedes 233296. For tractor models D10, D12, D14, D15, D17. (Part No: 70237136)
$14.98

Solenoid, 12 Volt - Starter solenoid, diesel, 12-volt. For tractor models 180, 185, 190, 200, 7000, 7020, D17. Replaces Delco #1115510 or OEM numbers 1028587M91, 159711AS, 65479C2 and R11292. (Part No: 70243828)
$22.20

Solenoid, 12 Volt - Starter solenoid. For tractor models D10, D12, D14, D15, (D17, D19, 170, 180 with 1107695 starter) D21 all with gas engines and Delco starters. Replaces Delco DR1467, OEM 237136, 233296, 70237136, 910687 (Part No: DR1467)
$16.23

Solenoid, 12 Volt - Starter solenoid. For tractor models (D17 diesel using Delco 1113082), (180, 185, 190 all diesel using Delco starter except 1107859), (190XT, 200, 7000, 7010, 7020 all with diesel engines and Delco starters). (Part No: 581959)
$38.74

Spark Plug Wire Set, Custom - Fits: B, C, CA, D10, D12, D14, D15, D17, I40, I400, I500, I60, I600, IB, RC, WC, WD, WD45, WF, 170, 175, 510, 512, 514, 610, 612, 614 With Distributor Only. Replaces: 225084, 225613, 229867, 70225084, 70225613, 70229867 (Part No: S.65034)
$18.09

Start SW Cable - Battery cable, starter to switch. 19" length, 6 gauge. Tractors: D17, D19 (Part No: 70229490)
$15.66

Starter Drive - Remanufactured Starter Drive - (THIS IS NOT COMPLETE STARTER, JUST DRIVE GEAR ASSEMBLY) D17, D19 (models 1959 & later using 1107235 or 1107695) (Part No: 70231310)
$58.65

Starter Drive - For tractor models D17, D19 both built prior to 1960 with diesel engines and starter 1113082 or 1113657. (Part No: 567891)
$54.70

Starter Drive - For tractor models D17, D19 both built 1961 and later with diesel engines and using 1113152 starter. (Part No: 566570)
$106.20

Starter Drive - For D17 with Diesel engine SN# up to 38964, (F, G, L all combine with Diesel Engine), (180, 185, 190, 190XT all with Diesel Engine. Starter Drive. 10 Teeth. (Part No: 1941157)
$32.69

Starter, Rebuilt - For tractor models D17, 170 both from 1957-1972 with gas engines. (Part No: 1107695)
$311.16

Switch - Starting switch, momentary push button type with cap and nut. For 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550, D17, D19 (Part No: 70253322)
$11.96

Tune Kit, Comprehensive - This Comprehensive Tune Kit is for 4 Cylinder Gas Engines. Includes Spark Plugs, Points, Condenser, Rotor, Distributor Cap, and universal plug wire set. For AC tractors using CLIP-HELD Delco distributor and 14mm, 3/8" reach 13/16" hex spark plugs. Fits CA, WD, WD45, D10, D12, D14, D15, D17 except with Delco distributor # 112688. (Part No: ACTUNEKIT)
$42.89

Tune Up Kit - for 4 Cylinder Gas Engines. Includes Spark Plugs, Points, Condenser and Rotor. For AC tractors using 14mm, 3/8" reach, 13/16" hex spark plug. Fits CA, WD, WD45, D10, D12, D14, D15, D17 except with Delco distributor # 112688. (Part No: ACTK1)
$22.38

Voltage Regulator - 12-volt, using Delco generator 1100305 (VR1817). Also gas or diesel using Delco generators 1100345, 1100426. For D10, D12, D14, D15, D17, D19 (Part No: 70229484)
$18.75

Engine Bearings
Cam Bearing - Center cam bearing, 1 used in 226 CID 4 cylinder gas engine. (Part No: 70229952)
$39.15

Cam Bearing, Gas Engine - Set of 3. For W, WC, WF, W25, WD, all with 201 CID 4 cylinder Gas Engine. For WD45 and D17 with 226 CID 4 cylinder Gas Engine. (Part No: 70229953)
$27.00

Cam Bearing, Set - For tractors: D15 Diesel, D17 Diesel, WD45 Diesel, D19 gas & diesel. (Part No: 74514023)
$40.42

Main Bearing Set, 226 Gas, .010 - .010". For tractor models D17, 170 with G226 gas engine. (Part No: MBK-D17-010)
$103.53

Main Bearing Set, 226 Gas, .020 - .020". For tractor models D17, 170 with G226 gas engine. (Part No: MBK-D17-020)
$103.53

Main Bearing Set, 226 Gas, STD - Standard size with flanged thrust bearing. For tractor models D17, 170 with G226 gas engine. (Part No: MBK-D17)
$103.53

Main Bearing Set, 262 Diesel, .010 - Main Bearing Kit..010", 3-9/16 Std. bore. For 262 CID engine. 6 cylinder diesel engine. For tractor models D17, WD45 (Part No: MBK-D17D7-010)
$170.90

Main Bearing Set, 262 Diesel, .020 - Main Bearing Kit..020", 3-9/16 Std. bore. For 262 CID engine. 6 cylinder diesel engine. For tractor models D17, WD45. (Part No: MBK-D17D7-020)
$137.06

Main Bearing Set, 262 Diesel, STD - Main Bearing Kit. Std. kit. For 262 CID engine. 6 cylinder diesel engine. For tractor models D17, WD45. (Part No: MBK-D17D7)
$170.90

Rod Bearing Set, .002 - Connecting rod bearing set..002", For tractor models CA, WD45D, D17D, D19D with 6BD23, DA262, 6 cylinder engine. (Part No: CRK-D17D6-002)
$91.99

Rod Bearing Set, .010 - .010". For tractor models W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). (Part No: CRK-AW-010)
$48.07

Rod Bearing Set, .010 - Connecting rod bearing set..010", For tractor models CA, WD45D, D17D, D19D with 6BD23, DA262, 6 cylinder engine. (Part No: CRK-D17D6-010)
$93.44

Rod Bearing Set, .020 - .020". For tractor models W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). (Part No: CRK-AW-020)
$48.07

Rod Bearing Set, .020 - Connecting rod bearing set..020", For tractors: CA, WD45D, D17D, D19D with 6BD23, DA262, 6 cylinder engine. (Part No: CRK-D17D6-020)
$93.44

Rod Bearing Set, Standard - For tractor models W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). (Part No: CRK-AW)
$48.07

Rod Bearing Set, Standard - Standard, connecting rod bearing set. For tractor models CA, WD45D, D17D, D19D with 6BD23 or DA262 6 cylinder engine. (Part No: CRK-D17D6)
$93.44

Rod Bearing, 201 Gas, .010 - Individual connecting rod bearings..010", For tractors: W, WC, WF, WD, WD45G, D17G, 170G. (Part No: 231125-010)
$14.12

Rod Bearing, 201 Gas, .020 - Individual connecting rod bearings..020", For tractors: W, WC, WF, WD, WD45G, D17G, 170G. (Part No: 231125-020)
$14.12

Rod Bearing, 201 Gas, STD - Individual connecting rod bearings. Standard, For tractors: W, WC, WF, WD, WD45G, D17G, 170G, B, C, CA, RC. (Part No: 231125)
$14.12

Rod Bearings, Early - For the early models with 2 inch journals. Only available in Standard. For tractor models W, W25, WC, WD, WD45, WF. Engine: 201 CID Gas This is 1 pair for 1 rod. Order 4 for complete engine. Oversize of .005 may be available.... call for availability. (Part No: 70223619)
$25.73

Engine Gaskets
Crankshaft Rear Main Seal - With Press-on Oil Seal Retainer For D17 with 262 Diesel Engine. (Part No: SS48048)
$81.76

Crankshaft Seal, Front - For tractor models 170, 175, D17 with 226 CID gas engines. (Part No: 70229229)
$6.51

Full Gasket Set - For WD45, D17, 170, 175 all with 226 CID gas engine. Comes with crank seals. (Part No: FS3162)
$107.64

Full Gasket Set - With Bolt-on Oil Seal Retainer. For D17 with 262 Diesel Engine. (Part No: FS3293VW)
$202.90

Full Gasket Set - This complete Gasket for the D17 with Press-on Rear Main Oil Seal Retainer with 262 Diesel Engine. (Part No: FS3293VC)
$153.78

Gasket Set - This is a complete gasket set with main bearing seals, where required. For D17 with engine serial number 113009 to 119937 (not for engine serial number 117087 to 117104). For 262 CID 6-cylinder diesel engine. (Part No: FS7805B2)
$189.10

Head Gasket - Cylinder Head Gasket. For tractors: W, WC, WF, WD, WD45, D17, 170. All with gas engines. (Part No: 70229406)
$42.77

Head Gasket Set - For GAS engine in: D17, W, W25, WC, WD, WD45, WF. Includes Upper gasket set with head gasket. (Part No: 70277286)
$64.53

Head Gasket Set - For D17 with 262 Diesel Engine (Part No: HS3293VC)
$141.75

Intake & Exhaust Manifold Gasket Set - For tractor models D17 series III, WC, WD, WD45, all with gas engine. (Part No: 70229958)
$15.35

Oil Pan Gasket - 6 piece pan gasket set. For 201 and 226 CID 4 cylinder gas engines on: W, WC, WF, W25, WD, WD45, D17, 170. (Part No: 70229860)
$11.61

Valve Cover Gasket - GASKET. For tractor models D17, W, W25, WC, WD, WD45, WF. All with gas engines. (Part No: 70255297)
$13.61

Engine Rebuild Kits
Basic Engine Kit - Less Bearings - Made by TISCO. For D17 with 226 CID 4-cylinder 4 1/8 overbore gas engine. This basic kit contains a sleeve and piston kit with rings, pins and retainers, an overhaul gasket kit and pin bushings. No bearings. (Part No: BEKA1121A-LCB)
$501.91

Basic Engine Kit - Less Bearings - Made by TISCO. For D17 with engine serial number 113009 to 119937 (not for engine SN# 117087 to 117104) with 262 CID 6-cylinder diesel engine. This basic kit contains a sleeve and piston kit with rings, pins and retainers, an overhaul gasket kit and pin bushings. No bearings. (Part No: BEKA1123-LCB)
$1373.51

Basic In-Frame Overhaul Kit - Made by TISCO. Basic in-frame kit for 226 CID 4 cylinder gas engine. Overbore 4 1/8 Contains: PK121 sleeve and piston kit with rings and pins, 70277286 valve grind gasket set, 70229860 oil pan gasket kit. For D17, WD45 (Part No: BIFA1121)
$437.09

Engine Overhaul Kit - For AC D17 (226 CID 4-cyl Gas) Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set, overbore from 4" to 4-1/8"). Complete Gasket Set with main bearing seals where required. Main Bearing Kit. Connecting Rod Bearing Kit. Cam Bearing Kit. Valve Parts (intake & exhaust valves, springs, guides & keys). Available with Std., .010 or .020 bearings. (Part No: EOK1121A)
$853.92

Engine Overhaul Kit - For AC D17 Eng SN# 113009 to SN# 119937, not for Eng SN# 117087 to SN# 117104 (262 CID 6-cyl Diesel) Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set, standard bore 3-9/16"). Piston Pin Bushings. Complete Gasket Set with main bearing seals where required. Main Bearing Kit. Connecting Rod Bearing Kit. Valve Parts (intake & exhaust valves, springs, guides & keys). Available with Std., .010 or .020 bearings. Kit also available without bearings as EOK1123-LCB. (Part No: EOK1123)
$2261.34

Engine Overhaul Kit - Less Bearings - Made by TISCO. Engine overhaul kit 3-9/16 Std. bore. For 262 CID engine. 6 cylinder diesel engine. Kit contains sleeve and piston kit, bushings, gasket set, intake valves, exhaust valves, springs, guides, and keys. For tractors: D17. (Part No: EOK1123-LCB)
$1997.45

Engine Overhaul Kit - Less Bearings - Made by TISCO. For AC D17 (226 CID 4-cyl Gas) Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set, overbore from 4 to 4-1-8). Cam Bearing Kit. Complete Gasket Set with main bearing seals where required. Valve Parts (intake & exhaust valves, springs, guides & keys). Engine bearings must be ordered separately. (Part No: EOK1121A-LCB)
$726.46

In-Frame Overhaul Kit - With Bearings - 4 1/8 Overbore For D17, 170, 175 with G226 Gas Engine with CENTER Thrust Bearing. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. ** NOTE: Please specify CENTER THRUST BEARING in comments section on your order for this kit. (Part No: R1968-IFKB)
$570.94

In-Frame Overhaul Kit - With Bearings - 3 9/16 Bore For D17 with 262 Diesel Engine. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: R3310-IFK)
$1246.88

Overhaul Kit - 4 1/8 Overbore For D17, 170, 175 with G226 Gas Engine with Center Thrust Bearing. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: R1968-OHKB)
$576.82

Overhaul Kit - 3 9/16 Bore For D17 with 262 Diesel Engine. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: R3310-OHK)
$1115.62

Valve Overhaul Kit - This Valve Overhaul kit contains intake & exhaust valves, springs, guides and retainers. For D17 with 4-cyl gas 226 CID engine. (Part No: VOKA226)
$155.58

Valve Overhaul Kit - This Valve Overhaul kit contains intake & exhaust valves, springs, guides and retainers. For model D17 with engine serial number 113009 to 119937. Not for engine serial number 117087 to 117104. For 6-cylinder diesel engine 262 CID. (Part No: VOKA262)
$569.66

Engine Parts
Camshaft Timing Gear - 54 teeth. 1.623" I.D. press on style. . For tractor models 170, 175, D17, W201 all with gas engines, and (W226, WD45 gas engine SN# 45-48556 and up). Replaces 70203923, 227038, 70227038, casting number: AM4175-1. (Part No: 70227038)
$143.45

Connecting Rod - For tractor models (D19 gas or diesel), (WD45, D17 diesel) all with casting # 4500141. (Part No: R1201490)
$105.93

Crankshaft, Timing Gear - 27 teeth, For tractor models (D17, 170, 175, all gas), (W226, WD45 all gas engine SN# 45-11050. I.D. is 1.625 inches. (Part No: 70230217)
$94.53

Flywheel Ring Gear - Has 139 teeth, 14.0625 inch O.D. For D17, 170, 175 all with gas engine, W225 SN# PU96714 and up with gas engine. Flywheel Ring Gear. (Part No: 70226830)
$27.39

Governor Gear - This new Governor Gear fits tractor models D17, 170 and 175 tractors with 226 cubic inch 4 cylinder gas with engines. Replaces: 229510, 70229510, Casting Number: AM4479 (Part No: 70229510)
$91.29

Governor Weight - This Governor Weight D17, WC, WD, WD45, WF, 170, 175 with 201 or 226 cubic inch 4 cylinder gas with engines. Replaces: 229980, 70229980 (Part No: 70229980)
$24.25

Pushrod - Pushrod, new. Sold individually. 11.017" Overall length, 0.314" OD. D17, WC, WD, WD45, WF, 170, 175 (with 201 CI, 226 CI gas/LP engines)Replaces: 70203018, 203018 (Part No: 70203018)
$22.27

Rocker Arm Support Stand - This new Cast Rocker Arm Support Stand fits D17, WD45, 170, 175 (WD, WF (engine serial number 253200 - 253489)Fits models above with 201 & 226 cubic inch gas engines; 4 Used per tractor --- Sold individually. Measures 1.945" Tall with a 0.865" Hole Diameter. Please measure before ordering. Replaces Replaces: 224727, 225019, 70224727, 70225019 (Part No: 70225019)
$28.00

Valve Keys - Used on Allis Chalmers D15 (ENG SN <119504)and D17 (ENG SN <113009-119937 EXCEPT ENG SN 117087-117104) Set of 16 halves. Replaces 74356080 (Part No: 46209D)
$5.52

Valve Service Kit - For tractor models D17, W, W25, WC, WD, WD45, WF. All with either 201 or 226 CID 4 cylinder gas engine. Contains: springs, guides, locks, (no valves). (Part No: VSKA201)
$60.72

Valve Service Kit - For D17 with 262 CID 6 cylinder diesel. Contains: springs, guides, locks, (no valves). (Part No: VSKA262)
$191.56

Valve Spring, Exhaust - Spring with damper, exhaust valve. 3-9/16 Std. bore. For model D15 with 175 CID 4 cyl diesel eng SN# up to 119504 and D17 with 262 CID 6 cylinder diesel eng SN# 113009 to 119937 except SN# 117087 to 117104. Must be ordered in multiples of 2. Price is for 1. (Part No: 74513811)
$10.96

Valve Spring, Intake - Spring with damper, intake valve. 3-9/16 Std. bore. For model D15 with 175 CID 4 cyl diesel eng SN# up to 119504 and D17 with 262 CID 6 cylinder diesel eng SN# 113009 to 119937 except SN# 117087 to 117104. Must be ordered in multiples of 2. Price is for 1. (Part No: 74513813)
$19.65

Valve, Exhaust Pair - This is for a pair of exhaust valves for tractor model D17 to engine SN# 119504 with 262 CID 6 cylinder Diesel Engine. For D17 engine SN# 113009-119937 not including serial numbers 117087-117104. Order 1 and receive 2 valves. (Part No: 74505210)
$29.95

Valve, Exhaust Set - This is a set of 4 exhaust valves for W, WC, WF, W25, WD all with 201 CID 4 cylinder Gas engine. For WD45 and D17 with 226 CID 4 cylinder Gas engine. (Part No: 70241527)
$47.40

Valve, Intake - Intake valve is for D17 to engine SN# 119504 with 262 CID 6 cylinder Diesel Engine. For D17 engine SN# 113009-119937 not including serial numbers 117087-117104. Order 1 and you will receive 1 valve. (Part No: 74506505)
$12.70

Valve, Intake Set - This is for a set of 4 intake valves, For W, WC, WF, W25, WD all with 201 CID 4 cylinder Gas engine. For WD45 and D17 with 226 CID 4 cylinder Gas engine. Order 1 and receive 4 valves. (Part No: 70209132)
$44.66

Engine Pistons and Sleeves
Piston - For 4 1/8 inch overbore, Single piston, medium compression. For tractor models 170, 175, D17 all gas and WD45. (Part No: PA31)
$67.11

Piston & Sleeve, Single Cylinder, Dished Piston - Overbore from 4" to 4-1/8" For 226 CID Gas engine on: 170, 175, D17, WD45. Includes: "Dished" Piston, rings, pin, retainers, liner. FOR 1 CYLINDER. (Part No: SK155)
$109.34

Piston & Sleeve, Single Cylinder, Flat Piston - Overbore from 4" to 4-1/8" For 226 CID Gas engine on: 170, 175, D17, WD45. Includes: "Flat" Piston, rings, pin, retainers, liner. FOR 1 CYLINDER. (Part No: SK156)
$110.34

Piston Pin Bushing - For tractor models D15D, D17D, D19 used in 175 and 262 cid diesel engines. Priced Each. If you order 1, you will receive 1 bushing. (Part No: 74507127)
$23.03

Piston Pin Bushing - For tractor models (WD45, D14, D17 diesel), (D19 gas or diesel). (Part No: 827980)
$31.16

Piston Sleeve - For 4 1/8 inch bore piston. For tractor models (170, 175, D17 gas), W25, WC, WD, WD45, WF. (Part No: SW32)
$58.43

Sleeve & Piston Kit - Contains sleeves, pistons, pins, retainers, top chrome & oil control ring set. Overbore from 4" to 4-1/8". For WD45 and D17 with 226 CID 4-cyl gas engines. Replaces OEM #s 70207435, 70229718 (Part No: PK121)
$351.90

Sleeve & Piston Kit - For D17 with engine serial number 113009 to 119937 (not for engine serial number 117087 to 117104). For 262 CID 6-cylinder diesel engine. Kit is complete for 6 cylinders, one used per engine. Contains sleeves, pistons, retainers, top chrome & oil control ring set for 3-9/16" standard bore. (Part No: PK123)
$1042.66

Engine Rings
Piston Ring Set - Ring set for 4 pistons. Overbore 4-1/8, 3 compressions rings 3/32 and 1 oil ring 1/4 for each piston. For tractors:WD45. For 4 cylinder gas engine. For 262, D19, GLEAMER C (Part No: PRS121)
$53.88

Piston Ring Set - Complete set. 4" standard bore. Comes with 3 compression rings 1/8" and 1 oil ring 3/16". For tractor models (W, W25, WC, WD, WF all with 201 CID gas engines), (WD45, 170, D17 all with 226 CID gas engines). (Part No: 70230091)
$91.71

Piston Ring Set - 4 Cylinder - Piston Ring Set for WD, WD45, D17 with 4 1/8 inch bore piston, 2 Compression at 3/32, 1 Compression at 1/8 inch, and 1 Oil at 1/4 inch. Complete set for 1 engine. (Part No: 2C7794)
$131.53

Exhaust System
Exhaust Pipe - This new bare metal Exhaust Pipe has 1-1/2" pipe thread and is 4" in length. It Fits D17 (Gas/LP SN: 32001 & up), 170 Gas, 175 Gas. It replaces original part numbers 234541 and 70234541. (Part No: 70234541)
$9.80

Exhaust Stack, Chrome - This is a Chrome Straight Stack, Double Walled - 29" Tall - 3 1/2 O.D. Vertical exhaust Stack for Allis-Chalmers GAS ENGINE models: WC, WD, WD45, and D17 To S#42000. (Part No: R4446)
$114.61

Exhaust Stack, Chrome - Curved, double wall, Chrome Stack - 29" Tall - 3 1/2" O.D. For GAS Models: WC, WD, WD45, D17 To S#42000. (Part No: R4447)
$145.87

Intake & Exhaust Manifold - For D17 series III, WC, WD, WD45, all with gas engine. Intake & Exhaust Manifold, non threaded outlet. Manifold has improved larger throat. Uses Muffler #70234494. Also replaces OEM# 70224782. This does not include gasket set. Gasket set part #70229958. (Part No: 70229416)
$206.75

Manifold - For gas models: D17 series IV, 170, 175. Has threaded outlet. Gaskets NOT included. (Part No: 70257485)
$200.72

Muffler - Muffler, includes clamp & bracket. Gas and diesel.2-1/2" inlet length, 1-5/8" inlet I.D, 16-1/2" shell length, 10" outlet length, 1-3/4" outlet O.D. For D17, WD45. Type of clamp may vary slightly from the picture. (Part No: 70229531)
$27.38

Muffler - Muffler, 32000 thru 42000. For D17 Vertical Exhaust -1 15/16" Inlet I.D. - 2" Outlet O.D. - 29" Overall Length. Replaces Original Part Number 70234494 (Part No: 360720R91)
$28.49

Muffler - Muffler, 42001 and up. Vertical Exhaust Inlet I.D. 1-15/16", Outlet I.D. 2", Overall Length 29". For D17. Supersedes OEM# 237397. (Part No: 70246129)
$49.50

Muffler - Vertical Exhaust Inlet I.D. - 1 5/16 Outlet O.D. - 2 Overall Length - 29 For D17 Gas (From S#42001). Use R1751 Clamp, Use R1800 Rain Cap (Part No: R1050)
$57.71

Muffler, Vertical - Oval body. Inlet 2-3/8" I.D, outlet 2" O.D, 27" overall length. For tractor models D15 diesel SN# 9002 and up, D17 diesel SN# 38964 and up, 1960 to 1967. (Part No: 70237290)
$72.21

Muffler, Vertical - Round body 3-1/4" shell dia. A= 3" inlet length, B= 3" x 4-1/8" base plate, C= 16-1/2" shell length, D= 6-1/2" outlet length, E= 2-1/4" outlet O.D., F= 26" overall length. For tractor models (D15 with diesel engine and SN# up to 9001), (D17 with diesel engine and SN# up to 38964). (Part No: 70234493)
$37.61

Fuel System / Air Intake
Air Cleaner Bowl - Clear plastic pre-cleaner bowl, for air intake on gas model. (A) Bowl O.D. at top: 7-1/4. (B) Cone I.D. at top: 3-1/2. (C) Bowl side height: 3. (D) Overall height: 4-1/8. Small bowl 7-1/4 diameter, for 2 to 3 inlet. For A, C, CH, CR, D17, F, F2, G, K, K2, L, M (Part No: 71125804)
$9.25

Air Filter - Air cleaner element for gas engines, SN# 42001 & up. Also D17 Series IV. For model D17. (Part No: 70237395)
$24.62

Carburetor Float - For tractor models WD, WD45, D17, 175. Carburetor Float for Marvel Schebler Large Bowl measures 2 3/4 inches at widest point: TSX561, TSX773, TSX869, TSX871, TSX928. Replaces OEM part number 70226456. (Part No: 70226456)
$22.68

Carburetor Kit, Basic - Kit for Zenith 13294, 11588, 12217, 12590, 12232 carbs used on 170, D17, WD45. (Part No: Z104)
$24.00

Carburetor Kit, Basic - Kit for Marvel TSX464, TSX561, TSX773, TSX871, TSX869, TSX928 carbs used on 170, 180, 185, D15, D17, WD45. (Part No: MS102)
$10.89

Carburetor Kit, Basic - Kit for Marvel TSX863 or TSX848 carbs used on D10, D12, D15, D17, D19, D21. (Part No: MS103)
$23.54

Carburetor Kit, Comprehensive - FOR ZENITH Carburetor 11588 OR ALLIS CHALMERS CARB 227101 For D17, WD45. (Part No: BK28AV)
$37.08

Carburetor Kit, Comprehensive - For Marvel-Schebler #s: TSX464, TSX561, TSX773, TSX871 (Must Reuse Old Choke Shaft on TSX871). Contains all parts shown. For tractor models D17 and WD45. (Part No: R7823)
$54.51

Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: Fits D17 (1956-63), 170, 100 Harvester, WD45 Crawler, 2 row cotton pickers, D-Graders, Replaces TSX464, TSX561, TSX773, TSX853, TSX869, TSX871, TSXU835, TSXU836. Center to center on the 2 mounting bolts is 2 3/8 inches. Made in USA, 1 year warranty. (Part No: 14991)
$349.70

Carburetor, Rebuilt - Fits D17 - replacement for OEM 11588. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1125-CARB)
$157.71

Carburetor, Rebuilt - Fits D17 (EARLY) - replacement for OEM TSX561, TSX464, TSX773, TSX871, . Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1126-CARB)
$157.71

Carburetor, Rebuilt - Fits D17 (LATE), 170 - replacement for OEM TSX869. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1127-CARB)
$157.71

Carburetor, Rebuilt - Fits D17 (LATE) - replacement for OEM 12217. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1128-CARB)
$157.71

Float Valve - Viton float valve for Zenith carburetors. For tractor models D17, WD45. (Part No: 70223909)
$14.79

Sediment Bowl - Small Bowl, 2 outlet type for Models: D10, D12, WC, WD, WD45, D15D, D17, D19, D21, 180, 170 diesel. (Part No: 70239167)
$20.02

Sediment Bowl Assembly - Large bowl, single inlet type. Used on; (D15 Gas SN: 9001 & up & All Diesel Using 2.315 Long Glass Bowl), (D17 Gas SN: 42001 & up and all Diesel Using 2.315 Long Glass Bowl), (D19 Gas SN: 12001 & up and all Diesel Using 2.315 Long Glass Bowl), (D21, WD45, 170, 175, 180, 185 all Diesel Using 2.315 Long Glass Bowl), (U Gas Only Using 2.315 Long Glass Bowl & Single Outlet ), (UC Gas Only Using 2.315 Long Glass Bowl & Single Outlet), (190, 190XT Gas, Dsl. Using 2.315 Long Glass Bowl). Replaces: 237946, 70237946 (Part No: S.61581)
$15.75

Sediment Bowl Assembly - Sediment bowl. Fits Model B, C, CA, R, D14, D17, D19. Replaces 70237944. (Part No: 910513)
$19.38

Sediment Bowl, Large - For tractor models WD45D, D15D, D17, D19, D21, 170, 180. All with diesel engines. (Part No: 581355)
$30.00

Throttle Lever Knob - For tractor models CA, D10, D12, D14, D15, D17, WC, WD, WD45, WF, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. (Part No: 220901)
$10.49

Gauges
Ammeter - Ammeter for tractor models 170, 190, D10, D12, D14, D15, D17, D19, D21. (Part No: 70254407)
$13.50

Ammeter - 30-30 Style - White Face with AC Logo. For D14, D15, D17. OEM# 240987 (Part No: R4017)
$31.43

Amp Gauge - This amp gauge has the "Allis-Chalmers" logo printed on the face. It fits the following tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, 160, 170, 175, 180, 190, 190XT, 200, 210, 220. It is meant to be used on systems that have been converted to 12 volts. It has a white face, chrome bezel, and it reads 60-0-60. (Part No: ACS1833)
$30.00

Fuel Gauge - This new fuel gauge includes the gasket and the four (4) 1/4"-28 x 1/2" slotted cap screws. fits tractor models D17 gas or diesel. Replaces: 229188, 70229188 (Part No: 70229188)
$72.45

Instrument Panel Trim - New and Improved ~ 1/2" swirl, machine turned design on stainless steel. For tractor models (D15 SN# 9001 and up), (D17 SN# 32001 to 75000), D19. Replaces 234433, 70234433 (Part No: 234433)
$72.04

Oil Gauge - Oil pressure gauge. For IB, B, C, CA, D10, D12, D14, D15, D17, WC, WD, WD45, WF (Part No: 70207834)
$16.79

Oil Gauge - OIL GAUGE For D10, D12, D14, D15, D17 (Part No: 70228718)
$10.79

Oil Pressure Gauge - Zone Style - White faced with black lettering 0-30 lb. range. For D10, D12, D14, D15, D17 Series I & II. OEM# 70228719, 70232546 (Part No: R4015)
$33.00

Oil Pressure Gauge - For tractor models D10, D12, D14, D15, D17. (Part No: 2348811)
$27.80

Oil Pressure Gauge - Zone Style - with AC Name 0-45 lb. Range For D17 Series III & IV, 170. OEM# 70228719, 70232546. (Part No: R4016)
$52.58

Tachometer - With AC name on face. For tractor models D14, (D15 gas up to SN# 6630), D17 gas. Replaces 70261728, 70261779, 70228818, 70234095. (Part No: 70229755)
$54.51

Tachometer - For model D17 diesel. Replaces 0230062-2, 70242374. (Part No: 70230062)
$163.53

Tachometer Cable - 56" total length. For tractor models (D15 diesel), (D17 gas), (D21, 190, 190XT diesel with camshaft driven tachometer). Replaces 229751, 233639, 244107, 261607, 261609, 70229751, 70233639, 70244107, 70261607, 70261608. (Part No: AM3131T)
$29.25

Tachometer Cable - 56" total length. For tractor models (D15 diesel), (D17 gas), (D21, 190, 190XT diesel with camshaft driven tachometer). Replaces 229751, 233639, 244107, 261607, 261609, 70229751, 70233639, 70244107, 70261607, 70261608. (Part No: AM3131T)
$29.25

Traction Booster Gauge, Fully Functioning - WORKING booster gauge. For tractor models CA, WD, WD45, (D10 up to SN# 9199), (D12 up to SN# 9167), D14, (D15 up to SN# 9000), (D17 up to SN# 75000), D19. Replaces 228977, 226631, 70226631, 235598, 70235598, 70228977. (Part No: 70228977)
$96.60

Water Temperature Gauge - This Water Temperature Gauge is used on Allis Chalmers D10, D12, D14, D15 Gas and Diesel, D17 Gas and Diesel, WD45 Diesel. It fits a 2 inch hole. The lead is 75 inches with a 5/8 18 U.F end and a 1/2 NPT pipe bushing. It Replaces Original part numbers 226966, 228334, 229870, 231378, 235724, 70235724, 70231378 (Part No: R4014)
$48.30

Hitch / Drawbar
3 Point Conversion Kit - Three Point Hitch for Allis Chalmers Models: D17, Series I-III - Cat I/II (Uses original swinging drawbar). Additional $100 shipping due to weight and size.IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK315)
$1233.76

3 Point Conversion Kit - Three Point Hitch for Allis Chalmers Models: D17, Series IV - Cat I/II (Use original swinging drawbar.) Weight is 175 Lbs. Additional $100 shipping. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK317)
$1060.99

Drawbar Yoke Assembly - Complete assembly for tractor models D14, D15 D17 Series I, II and III with snap couplet hitch. This is "Heavy Duty" for D14 and D15 models. Replaces: 70231146, 70232073, 70232074, 70224650, 232074, 231146, 232073, 224650 (Part No: 232074)
$281.65

Drawbar, Standard - 2.50" wide, 1.250" thick, 50.50" long. For tractor models 170, 175, 180, 185, (D17 series IV). (Part No: 70254452)
$293.98

Lift Link Clevis - Part is 7 3/4 inch overall length, 1 inch pin holes, 1 inch space in stirrup, and 1 1/8 inch threaded female end. For tractor models D17, 170, 175, 180, 185, 190, 190XT. (Part No: 70257726)
$73.83

Lift Link Screw - For tractor models D17, 170, 180, (185 SN# up to 5707). (Part No: 70254112)
$67.88

Top Link Bracket - This top link bracket fits the following tractor models: D17 except for series IV. (Part No: ACS018)
$82.32

Hydraulic System
Hydraulic Filter - Oil filter element, spin on type. For 180, 185, 190, 190XT, D15, D17, D19, D21 (Part No: 70239930)
$8.80

Lights
Dash Light, Chrome, 12 Volt - For tractor models 170, D10, D12, D14, D15, D17, D19, D21, 175, 180, 185, 190, 190XT, 200, 210, 220, I-40, I-400, I-60, I-600. Replaces 230247, 234404, 70230247, 70234404. (Part No: 229203)
$29.14

Light Switch - For tractor models (190, 190XT, 190XT III all SN# up to SN# 19000), D10, D12, D14, D15, D17. (Part No: 70234409)
$6.32

Light Switch - Comes with knob. For tractor models D10, D12, D15, D17, D19, D21, 190, 190XT, 190XT III. Replaces 70235977. (Part No: 70235976)
$14.67

Sealed Beam Bulb - Sealed beam bulb, 12 volt, 5-3/4 diameter. Trade no. 4419. For tractor models 190, D10, D12, D15, D17. (Part No: 70230252)
$9.90

Sealed Beam Bulb - Red backed, work/tail light, 4-1/2 dia. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 5040, 6040, 7030, 7050, D10, D12, D15, D17, D19, D21. (Part No: 70250301)
$20.23

Work Tail Light Assembly - 12 VOLT WOK LIGHT. For AC models: D10, D12, D14, D15, D17, D19, D21, 190, 190XT, 190XT III. (Part No: 70243313)
$76.07

Oil System
Oil Fill Breather Cap, NO Clip - 3-1/4" tall (says "OIL"). Fits B, C, CA, WD, WD45, D10, D12, D14, D15, 190XT, D17, D19, HD3, 200, 300, 310, 420, 430, 500B, W3, W5, VAC, VAI, VAH, VA, VAO, VAS. Replaces OEM 203196, 205298, 200267. (Part No: R4459)
$38.59

Oil Fill Breather Cap, With Clip - 3-1/4" tall (says "OIL"). Fits B, C, CA, WD, WD45, D10, D12, D14, D15, 190XT, D17, D19, HD3, 200, 300, 310, 420, 430, 500B, W3, W5, VAC, VAI, VAH, VA, VAO, VAS. Replaces OEM 203196, 205298, 200267. (Part No: R4458)
$36.75

Oil Filter - Oil filter cartridge, threaded neck type can. For GAS engines on: B, C, CA, G, IB, RC, WC, WD, WF, WD45, D10, D12, D14, D15, (D17 prior to series IV SN# less than 24000) and others - verify part number. (Part No: 70240912)
$14.04

Oil Filter - Oil filter cartridge, throw-away spin-on type. For 170, D10, D12, D15, D17, D19 (Part No: 70237000)
$3.97

Oil Pan Drain Plug - White Zinc finish, 7/8" - 18 UNF. Fits multiple models. Uses EBU6734A washer, sold separately. Replaces 205060, 224994, 225585, 225657, 226408, 4026437, 74026437 (Part No: C5NE6730B)
$2.85

Oil Pan Drain Plug Washer - This Washer is used with C5NE6730B Oil Drain Plug. (Part No: EBU6734A)
$3.00

PTO / Driveline
PTO & Lift Shaft Housing Seal - PTO Outer Seal for 1 Speed, 1 3/8 inch Output Shaft. For tractor models B, C, CA, D10, D12, D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 190XT III, 200. (Part No: 70241779)
$5.78

PTO Shaft - Rear 540 RPM PTO shaft. Length is 41.375 inches. 6 spline on both ends. 1 3/8 inch Diameter Replaces 70229312. For tractor models D-17, 170, 185, 180, 185. (Part No: 70231938)
$285.27

Snap Coupler Release Lever Knob - Plastic knob, 3/8" fine thread. For model D17. (Part No: R4572)
$7.35

Paint
Paint, Persian Orange #1, 1 Quart - This Allis Chalmers Persian Orange (#1) was use until 1960 on chassis for models E25-40, U, All-Crop, UC, A, B, C, CA, G, RC, WC, WF, WD, WD45, (Crawlers M, K, L, S), D10, D12, D14 and D17. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP282QT)
$20.58

Paint, Persian Orange #1, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** This Allis Chalmers Persian Orange (#1) was use until 1960 on chassis for models E25-40, U, All-Crop, UC, A, B, C, CA, G, RC, WC, WF, WD, WD45, (Crawlers M, K, L, S), D10, D12, D14 and D17. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP282SP)
$49.60

Paint, Persian Orange #2, 1 Gallon - This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP285GAL)
$46.89

Paint, Persian Orange #2, 1 Quart - This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP285QT)
$20.58

Paint, Persian Orange #2, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP285SP)
$49.60

Paint, Persian Orange, 1 Gallon - This Allis Chalmers Persian Orange (#1) was use until 1960 on chassis for models E25-40, U, All-Crop, UC, A, B, C, CA, G, RC, WC, WF, WD, WD45, (Crawlers M, K, L, S), D10, D12, D14 and D17. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP282GAL)
$46.89

Seats
Seat Assembly - Black Vinyl on Steel To Replace Two or Three Piece Seat For D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080 (Part No: R0980)
$392.98

Seat Assembly - Black Fabric on Steel To Replace Two or Three Piece Seat. For tractor models D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080. (Part No: R1118)
$491.23

Seat Back - Black & White Vinyl on Steel with Original Style Pleated Covering For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Part No: R4357)
$100.36

Seat Back - Black & White Vinyl on Wood For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. (Part No: R0853)
$44.66

Seat Back-MADE IN USA - Black & White Vinyl on Steel For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Part No: R0851)
$77.44

Seat Bottom - Black & White Vinyl on Steel with Original Style Pleated Covering For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Part No: R4356)
$138.83

Seat Bottom - Black & White Vinyl on Wood. For tractor models D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. (Part No: R0852)
$68.75

Seat Bottom-MADE IN USA - Black & White Vinyl on Steel For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Part No: R0850)
$103.77

Seat Cushion Set - This Black & white vinyl two piece cushion set is steel backed. Original style pleated covering. For tractor models D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. Replaces: 236318 (Part No: R4358)
$373.25

Seat Shock with Spring - Fits Models: D10, D14, D15, D17, D19, D21, 170, 175, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 704, 7050, 7060, 7080, 7580. (Part No: 227916)
$106.73

Sheet Metal / Body Parts
Fender, LH - For tractor models: D17, D19. Mounting bracket not included. FIT TO TRACTOR BEFORE PAINTING, This fender is primer painted, color may vary, it will need to be sanded & filler primer to fill in any spots from spot welding. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 720192)
$213.90

Fender, RH - For tractor models: D17, D19. Mounting bracket not included. FIT TO TRACTOR BEFORE PAINTING, This fender is primer painted, color may vary, it will need to be sanded & filler primer to fill in any spots from spot welding. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 720193)
$213.90

Front Weight - This front weight fits the following tractor models: D15, D17, D19, RC, WC, WD, WD45 (Gas and LP only, will not fit Diesel), and WF. Replaces part numbers: 227272 and 70227272. DUE TO THE WEIGHT OF THIS ITEM AN ADDITIONAL $50 WILL BE ADDED TO THE STANDARD SHIPPING CHARGE. IF YOU ARE ORDERING ONLINE, THIS CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECIPT IS PRINTED. (Part No: 227272)
$156.98

Side Panel, LH - Left Hand. For tractor models D17 Gas, D19. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 70232149)
$43.50

Side Panel, RH - Right Hand - Two Piece For D17 Series I & II Gas. Replaces 70229665. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 70237188)
$54.22

Side Panel, RH - Right Hand For D17 Series III & IV Gas, D19. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 70235512)
$43.50

Toolbox - Fender mount, 15 x 5-1/2 x 3-3/4. Fits WC, WD, WD45, D10, D12, D14, D15, D17. (Part No: 70228924)
$51.03

Toolbox - NEW OLD STOCK - SPECIAL PURCHASE - NOTE: These have been warehoused for probably more than 40 years and look it! Some dust, some grime and some chipped paint. Very solid but may not close very smoothly. Measures 16" x 4-3/4" x 4-1/2". For tractor models D15, D17, D19, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. (Part No: 70249750)
$66.39

Weight Bracket Kit - This 3 piece weight bracket kit is intended for use with #227272 weights and fits the following tractor models: D15, D17, and D19. It also replaces: Front Brackets: 236049, and 70236049, Right Hand Brackets: 239529 and 70239529, and Left Hand Brackets: 239528 and 70239528. (Part No: 239528)
$179.40

Steering
Pivot Pin Assembly - Includes: 70916896 (7/8" NF Slotted Nut) and 70925721 (5/32" X 2" Cotter Pin). For tractor models (170, 175 gas with roll shift front axle), (180, 185, 190, 190XT, 200, D19 all with roll shift front axle), (D17 SN# 38136 and up with roll shift front axle). (Part No: 70235154)
$32.32

Power Steering Pump - Belt driven pump. For tractor models D19, (D17 gas SN# 42001 and up), (D17 diesel SN# 38964 and up), D17 all series 4). (Part No: 70240066)
$1301.96

Seal - Seal with wear sleeve for tractors with dual front wheels, except HD axle, SN# 42001 & up. For tractor models 160, 170, 175, 180, 190, 190XT, 200, 6060, 6070, 6080, 7000, D10, D12, D15, D17. (Part No: 70235120)
$13.59

Seal, Power Steering Pump Driveshaft - This Seal for the Power Steering Pump Driveshaft is for tractor models D10, D12, D14, D15, D17, WD, WD45. Verify measurements of 1.002 inches outside diameter, .437 inches inside diameter and .375 inches in width. (Part No: 1751651M1)
$5.39

Spindle Bushing - This Spindle Bushing is use on Spindle 70237434 on tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96" tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Part No: 70211743)
$12.23

Spindle Thrust Washer - For tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96" tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Part No: 70218762)
$4.96

Spindle, LH/RH - A=12", B=1.610", C=1.625", D=1.187". For tractor models 170 Late, 175, 180, 185, D15, D17. (Part No: 70270038)
$171.42

Spindle, LH/RH - A=12", B=1.610", C=1.500", D=1.187". For tractor models D10, D12, D14, D15, D17 early SN# with 5 bolt wheel. (Part No: 70237434)
$217.24

Steering Arm, LH - Fits 1.610" dia. hole, keyed spindle, ball joint hole taper is .625" to .725". For tractor models 170, 175, 180, 185, 190, 190XT, 200, D14, D15, D17, D19. (Part No: 70245867)
$136.74

Steering Arm, RH - Fits 1.610" dia. hole, keyed spindle, ball joint hole taper is .625" to .725". For tractor models 170, 175, 180, 185, 190, 190XT, 200, D14, D15, D17, D19. (Part No: 70245868)
$136.74

Steering Wheel - Steering wheel, 3 spoke. 18" diameter, 7/8" shaft. Round hub with pinhole. For tractor models WC, WD, WD45, (D14 SN# 19001 and up), (D17 SN# 24001 and up). Replaces: 70229677, 70202260, 229677, 202260. (Part No: 70229677)
$40.45

Steering Wheel - For D10, D12, D14, D15, D17, D19, D21. Steering Wheel. 17 1/2" Diameter, Splined Hub. Black Plastic with Covered Spokes. Diamond Center AC Logo Available as Part#R3996. Also Replaces 232033. (Part No: 70232033)
$54.41

Steering Wheel - For WD, WD45, Styled, WC, Early D14, This steering wheel is for tractor models D15, and D17 with 18 Inch Diameter, 7/8" Smooth Hub with pin hole. Replaces OEM V2260 and 202260. (Part No: 202260)
$44.85

Steering Wheel Center Logo - For D10, D12, D14, D15, D17, D19, D21. CHROME Steering Wheel Center Logo used on 70232033 and 70233851 steering wheels. Replaces 70228474, 70233852, 70246724 (Part No: R3996)
$18.57

Steering Wheel, Cream - For D10, D12, D14, D15, D17, D19, D21. Steering Wheel. 17 1/2" Diameter, Splined Hub. Creme Plastic with Covered Spokes. Diamond Center AC Logo Available as Part#R3996. (Part No: 70233851)
$48.99

Steering Worm Shaft Bearing - This Steering Worm Shaft Bearing has a 1.197" Inside Diameter, a 1.700" outside diameter and is 455" Wide. It fits (D14, D15, D17 Rear wormshaft bearing, manual steering only), D19 (Rear wormshaft bearing, manual steering only - 1 used per tractor) Replaces original part numbers: 228150, 70228150 (Part No: 70228150)
$14.90

Tie Rod Assembly - Consists of OEM Part No.s 70250140 and 70250141. Replaces: 249418, 225280, 225279, 254662, 254661. For D14, D15, D17, D19, WD, WD45, 170, 175, 180, 185, 190XT, 200 Will fit if cut to proper length (Part No: 70254660)
$51.75

Tie Rod End, Female - 17.500" long. For tractor models 180, 185, 190, 190XT, 200. Will also fit 170, D14, D15, D17, D19 if cut to proper length. Can also replace 250142 used on WD, WD45 if cut to length. (Part No: 70254661)
$37.26

Tie Rod Male - Tie rod end with tube, outer. For adjustable front axles. 16-1/2 to center of post. 0.812" Diameter. 50" minimum thread, not for Hi-Clear. For 180, 185, 190, 190XT, 200, D17, D19 (Part No: 70254662)
$30.11

Wheels
Bar Clamp - Wheel clamp, disc to rim. For power shift rear wheels. SN# 42001 & up. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 5040, 5045, 5050, 6060, 6070, 6080, 6140, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 8550, D15, D17. (Part No: 70235676)
$18.41

Bearing Cone - Inner cone for front wheel bearings. For tractor models 170, 180, 190, D17, D19. (Part No: 70209899)
$12.96

Bearing Cone - Rear axle inner cone, Timken number 3982. For tractor models 190, 190XT, D17. (Part No: 70209905)
$28.37

Bearing Cone - Inner cone for front wheel bearings. For tractor models WC, WD, WD45, D10 (SN# 3501 thru SN# 9000), D12 (SN# 3001 thru SN# 9000), D14, D15, D17 (prior to SN# 42000). Replaces 2776. (Part No: 70222214)
$21.66

Bearing Cup - Inner cup for front wheel bearings. For 170, 180, 190, D17, D19 (Part No: 70235089)
$8.34

Bearing Cup - Outer cup for front wheel bearings. For 170, 180, 190, D14, D15, D17, D19, WC, WD, WD45 (Part No: 70209983)
$6.45

Bearing Cup - Inner cup for front wheel bearings. For tractor models D10, D12, D14, D15, D17, WC, WD, WD45. (Part No: 70209987)
$6.71

Front Wheel - 4-1/4 x 16, five bolt, 3 3/8 pilot hole and 3 inch bolt spacing center-to-center. For WC, WD, WD45, D10, D12, D14, D15, and D17. Not for use with front end loader. Add $10 additional shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R0088)
$76.94

Front Wheel Bearing Kit - Front wheel bearing kit, 5 bolt hub. Kit contains one each: 15250(Cup), 15118(Cone), 2776(cone), 2720(Cup), 70235120(Seal). Repairs one wheel. 42001 and up. For tractor models D10, D12, D15, D17. (Part No: 70247801)
$46.09

Front Wheel Bearing Kit - This is a complete Front Wheel Bearing kit for 1 wheel, with a 6 bolt hub. Verify individual part numbers to ensure you are ordering the correct kit. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 500, 600, 6060, 6070, 6080, 615, 7000, (D15 SN# 9001 and up with 6 bolt hub), (D17 SN# 42001 with 6 bolt hub), D19, I60, I600. Kit contains one of the following 15250B, 15118, 26823, 26882, 70235120. (Part No: WBKAC2)
$39.16

Front Wheel Bearing Kit - Front wheel bearing kit. Tractors: D10 (SN# 3501 to SN# 9000), D12 (SN# 3001 to SN# 9000), D10, D12, hi-clearance (prior to SN# 9000), WC, WD, WD45, D14, D15 (prior to SN# 9000), D17 (prior to SN# 42000). This kit is for one wheel only. Kit contains 1 each of the following p/n 15288A SEAL, 70209987 CUP, 70222214 CONE, 70209983 CUP, and 70209926 CONE. (Part No: 70228458)
$42.37

Hub Cap - THIS CAP IS FOR HUBS WITH OEM# 70228897 ONLY. For tractor models (D10 SN# 3501 and up), (D12 SN# 3001-9000), D14, (D15 SN# up to 9001), (D17 series III SN# up to 42001), WD, WD45. (Part No: 70276819)
$11.32

Wheel Bolt - This wheel bolt fits the following tractor models: D10, D12, D14, D15, D17, I40, I400, I60, WD, WD45, 170, 175, 180, 185, and I600. It has an overall length of 1.81 inches, a thread size of 9/16 18 UNF, and thread length of 1.12 inches. Replaces part numbers: 225191, 251815, 70225191, and 70251815. (Part No: WB916)
$1.43

Wheel Hub - For use with threaded hub cap, 4.620" dia. pilot hole, 6.00" wheel bolt circle, replaces OEM 236706. For tractor models 170, 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060 with 96" tread), 6070, 6080, 615, (7000 early), D15, D17, D19, 160, 1600. (Part No: 70261418)
$78.95

Wheel Hub - Six-bolt Wheel Hub that uses a press-on dust cap. For D15, Early D17, D19, Late 170, 175, 180, 185, 190, 190XT, 200, 6070, 6080, Early 7000. (Part No: R2818)
$92.41

Wheel Hub - Six-bolt Wheel Hub that uses a screw-on dust cap. For D15, Early D17, D19, Late 170, 175, 180, 185, 190, 190XT, 200, 6070, 6080, Early 7000. (Part No: R2819)
$88.41

Wheel Hub Cap - This is a threaded type front wheel hub cap for tractor models 170, 175, 180, 185, 190, 190XT, 200, 6070, 6080, (7000 early), D15, D17, D19. (Part No: 70220403)
$11.10

Wheel Hub With Cups - Front wheel hub, 6 hole and grease fitting. Use with drive-in hub cap #229116 (NOT available at this time). For 160, 170, 175, 180, 185, 190, 190XT, 200, 6060, 6070, D15, D17, D19. (Part No: 261418RL)
$107.56

Wheel Hub, 5 Bolt - Includes bearing cups. Hub has overall dimensions of 6 1/4 inch diameter and 5.28 inch depth. For tractor models (D10 SN# 3501 and up), (D12 SN# 3001-9000), D14, (D15 up to SN# 9001), (D17 series III up to SN# 42001), WD, WD45. (Part No: 70228897)
$107.86



Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: MIS3127)
$239.98

Brakes
Brake Rivet Tool - Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4" throat, 1/8" dia. rivet punch. (Part No: RIVET_TOOL)
$33.61

Brake Rivet Tool, Large - Larger version of our Brake rivet tool. 3-3/8" deep throat x 2-1/8" high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET)
$95.23

Cooling System
Magnetic Block Heater - Universal. 115-120 AC, 180 watts, draws 2 amp maximum. Surface area 2-3/4 inches x 3-3/4 inches, delivers 300-400 degrees surface temperature. (Part No: MBH1153)
$60.71

Radiator Drain Tap - This drain tap fits various tractor models as a radiator, engine block, and hydraulic drain tap. It measures 1/4 of an inch and has an 18 NPT thread size. Please verify size and thread count before ordering. (Part No: C9NN8115A)
$1.94

Zip Leak - Industrial Radiator Stop Leak - A professional strength stop leak for tractors, trucks and construction equipment. Designed for large, heavy duty cooling systems. 5 oz. Bottle. Instructions/Usage: For average antique tractors (120-160 CID engines) use 1/4 bottle for 15 minutes, if the leak fails to stop, add an additional table spoon. (Part No: Z14012)
$10.49

Decals and Emblems
AC Diamond Decal - Black & White, Milwaukee, 6" x 6", Vinyl Cut. (Part No: R4634)
$16.28

AC Diamond Decal - Orange Background, 5 1/2" x 5 1/2". (Part No: R4633)
$10.10

AC Diamond Decal - Black & white, 4" x 4", Vinyl Cut. (Part No: R4632)
$13.02

AC Diamond Decal - 1" x 1" orange, blue and gold printed on vinyl. (Part No: R5234)
$3.26

AC Logo Decal - 1-1/2" x 8", black and orange on white. (Part No: R0675)
$6.51

AC Logo Decal - 3" x 18", black and orange on white. (Part No: R0676)
$15.46

AC Logo Decal - 24" long, black and orange. (Part No: R0677)
$30.72

AC Logo Decal, New Style - 1-1/2" x 1-1/2" black and orange on white. (Part No: R5167)
$4.89

AC Logo Decal, New Style - 3-1/2" x 3-1/2" black and orange on white. (Part No: R5168)
$6.51

AC Logo Decal, New Style - 4-1/2" x 4-1/2" black and orange on white. (Part No: R5169)
$8.15

AC Logo Decal, New Style - 8" x 8" black and orange on white, printed on vinyl. (Part No: R5233)
$30.93

Power Shift Decals - One pair, white. For the cab on some Allis models. (Part No: R0674)
$25.14

Drive Train
Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088)
$9.69

Electrical System
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1952 & newer). Just call us at 800-853-2651. NOTE

Alternator Base Bracket Kit - Universal - Universal base bracket mounting kit. For converting from a generator to an alternator . Contains: brackets, bolts, washers, nuts & Basic Instructions. (Part No: 2348258)
$34.20

Alternator Top Adjusting Bracket, Universal - This Universal Top Adjusting Bracket For Alternator Or Generator is 7/8" wide, 1-1/2" offset, 8-1/4" from farthest end of slot to center of mounting hole, 3-3/4" slot length, 3/8" mounting hole. (Part No: ABC529)
$11.93

Battery Hold Down - Universal hold down for batteries that measure 8 15/16 inches long and 6 13/16 inches wide. (Part No: NCA10718A)
$15.81

Battery Hold Down - Universal Battery Hold down. Verify your battery measurements. This will fit a 9 3/16 inch long and 7 3/16 inch wide battery. (Part No: 1111-0147)
$13.43

Battery Hold Down Bolts - PAIR - These "J" bolts measure 10 1/2 inches long and are universal for many batteries. Verify length. Price is for a pair. (Part No: 393161R1)
$8.62

Battery Thermal Wrap - This thermal battery wrap is used to keep your battery warm. It is 60 Watts and measures 28 inches long. (Part No: BTW28)
$22.50

Battery Thermal Wrap - 80 Watt, 36 inch long wrap to keep your battery warm. (Part No: BTW36)
$37.48

Battery Thermal Wrap - 160 Watt, 36 inch long wrap to keep your battery warm. (Part No: BTW72)
$53.81

Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Part No: 28010)
$27.71

Coil - Universal 12V - Universal coil fits many models. This Coil comes with an external resistor which can be removed if you need a coil with no resistance. Also comes with a mounting bracket. Coil is designed to be used on a 12 volt tractor system with the resistor or 6 volt system without the resistor. Replaces: 74061737, 74514967. (Part No: D5TE12029AB)
$7.13

Coil Bracket - Universal Coil Bracket (Part No: R1940)
$3.41

Coil, High Performance (Black), 12 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40611)
$45.15

Coil, High Performance (Black), 12 Volt, Oil Filled - Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511)
$38.57

Coil, High Performance (Black), 6 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40111)
$43.25

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Part No: 40011)
$34.32

Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40501)
$40.25

Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40001)
$38.57

Coil, Ultra High Performance (Black), Oil Filled - Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45011)
$39.44

Coil, Ultra High Performance (Chrome), Oil Filled - Pertronix Flame Thrower II Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kitsor or any 6 volt system using the "Ignitor II". Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45001)
$42.51

Magneto, Wico XH & XHD, Service & Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6)
$14.25

STARTER - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it! (Part No: STARTER)
$0.00

Spark Plug - Extended tip, 14mm thread, 3/4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)
$2.73

Spark Plug - Extended tip, 14mm thread, 3/8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)
$2.73

Spark Plug Wire Set, 4 Cylinder, Univeral - Universal Spark Plug Wire Set, 4 Cylinder, straight boot, cut to length. (Part No: S2097)
$12.75

Spark Plug Wire Set, 4 Cylinder, Universal - For use with Ignitor high performance electronic ignition conversion kits. (Part No: S.66442)
$11.98

Spark Plug Wire Set, Universal 6 Cylinder - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260)
$15.00

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259)
$10.49

Starter, Generator Tag, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$14.31

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$14.31

Stripper and Crimping Tool - Professional Fast and Easy tool for stripping and crimping electrical wires. (Part No: B1SB6718)
$21.20

Engine Gaskets
Seal Installer/Remover - This kit helps with the removal and installation of upper rear main seals on many tractor engines without removing the engine or the crankshaft. This kit contains a corkscrew removal tool, a T-handle, and a wire with a clip for pulling new seals into their place. It also includes 2 extra clips. (Part No: W84019)
$5.33

Silicone Black RTV - Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR)
$5.43

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, Oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75° F to +500° F, 3.35 oz. tube. (Part No: PRM77BR)
$6.29

Silicone Copper RTV - Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicones. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75° F to +700° F, 3 oz. tube. (Part No: PRM101BR)
$10.47

Engine Rebuild Kits
Lucas Assembly Lube - Lucas Assembly Lube (4 oz). Designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. It’s useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing perfect for engine lding, super slick and tacky, easy to use, excellent rust inhibitor, excellent for long term storage, contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152)
$5.00

Engine Parts
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). NOTE

Engine Pistons and Sleeves
Piston Groove Cleaner - For pistons up to 5 1/2 inches. Cleans grooves of 5/64, 3/32, 1/8, 5/32 and 3/16. (Part No: B1SB9055)
$31.79

Piston Ring Compressor - Ratchet mechanism with square drive tool to adjust diameter and enlarged crimped edge to prevent compressor from entering cylinder. Depth 6 1/2 inches. Range 3 1/2 to 7 inches. (Part No: 900521)
$38.17

Ridge Reamer - Heavy Duty Ridge Reamer. Removes ridges from the top of the cylinder to achieve smooth wall surface on engine bores from 3 to 5 inches. Tungsten carbide blade is reversible for long life. (Part No: 500560)
$68.34

Engine Rings
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32"). NOTE

Exhaust System
Chrome Exhaust Stacks - Universal. Available from 2 to 5 inch inside Diameter. 48 to 53 inch length. Curved top on all sizes. Extended curver available on some sizes. Priced from $69.95. Single wall construction. Chrome Exhaust Clamps are $5.00 each when ordered with a pipe. Call for pricing for the size you need 800-853-2651 NOTE

Muffler Clamp, 1-1/2 - New Clamp for 1-1/2" outside diameter Muffler Inlet (Part No: MC112)
$2.75

Muffler Clamp, 1-1/4" - New Clamp for 1-1/4" outside diameter Muffler Inlet (Part No: MC114)
$2.50

Muffler Clamp, 1-1/8" - New Clamp for 1-1/8" outside diameter Muffler Inlet. (Part No: MC118)
$2.50

Muffler Clamp, 1-3/4" - New Clamp for 1-3/4" outside diameter Muffler Inlet (Part No: MC134)
$2.75

Muffler Clamp, 1-3/8" - New Clamp for 1-3/8" outside diameter Muffler Inlet (Part No: MC138)
$2.50

Muffler Clamp, 1-5/8" - New Clamp for 1-5/8" outside diameter Muffler Inlet (Part No: MC158)
$2.75

Muffler Clamp, 1-7/8" - New Clamp for 1-7/8" outside diameter Muffler Inlet (Part No: MC178)
$2.75

Muffler Clamp, 2" - New Clamp for 2" outside diameter Muffler Inlet (Part No: MC200)
$2.75

Muffler Clamp, 2-1/2" - New Clamp for 2-1/2" outside diameter Muffler Inlet (Part No: MC212)
$3.15

Muffler Clamp, 2-1/4 - New Clamp for 2-1/4" outside diameter Muffler Inlet (Part No: MC214)
$3.15

Muffler Clamp, 2-3/4" - New Clamp for 2-3/4" outside diameter Muffler Inlet (Part No: MC234)
$4.50

Muffler Clamp, 2-3/8" - New Clamp for 2-3/8" outside diameter Muffler Inlet (Part No: MC238)
$4.50

Muffler Clamp, 3" - New Clamp for 3" outside diameter Muffler Inlet (Part No: MC300)
$4.50

Muffler Clamp, 3-1/2" - New Clamp for 3-1/2" outside diameter Muffler Inlet (Part No: MC312)
$4.75

Muffler Clamp, 3-1/4" - New Clamp for 3-1/4" outside diameter Muffler Inlet (Part No: MC314)
$6.50

Muffler Clamp, 4" - New Clamp for 4" outside diameter Muffler Inlet (Part No: MC400)
$7.50

Muffler Clamp, 4-1/2" - New Clamp for 4-1/2" outside diameter Muffler Inlet (Part No: MC412)
$7.98

Muffler Clamp, 5" - New Clamp for 5" outside diameter Muffler Inlet (Part No: MC500)
$7.98

Rain Cap - This rain cap is for a 1.750 inch pipe. (Part No: R1799)
$5.32

Rain Cap - This rain cap is for a 2.0 inch pipe. (Part No: R1800)
$6.38

Rain Cap - This rain cap is for a 2.50 inch pipe. (Part No: R1802)
$6.38

Rain Cap - This rain cap is for a 3.00 inch pipe. (Part No: R1805)
$5.99

Rain Cap - This rain cap is for a 2.75 inch pipe. (Part No: R1804)
$10.61

Rain Cap - This rain cap is for a 1.50 inch pipe. (Part No: R1798)
$6.56

Rain Cap - This rain cap is for a 2.25 inch pipe. (Part No: R1801)
$5.84

Rain Cap - This rain cap is for a 3.5 inch pipe. (Part No: R1806)
$11.99

Rain Cap - This rain cap is for a 4.0 inch pipe. (Part No: R1807)
$8.83

Fuel System / Air Intake
Choke Cable - Universal choke cable 72 inches long, 7/16 inch thread dia. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72)
$11.58

Fuel Filter, In-Line, 1/4 inch - Inlet 1/4, outlet 1/4, O.D. 1-29/32, length 4-1/16. (Part No: 6511393)
$5.19

Fuel Filter, In-Line, 3/8 inch - Inlet 3/8, outlet 3/8, O.D. 1-29/32, length 3-7/8 (Part No: BF836)
$4.04

Fuel Filter, In-Line, 5/16 inch - Inlet 5/16, outlet 5/16, O.D. 1-29/32, length 4-5/32. (Part No: BF840)
$3.00

Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5/16, outlet 5/16, O.D. 2-1/8, length 3-21/32. (Part No: BF7736)
$2.28

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$24.20

Fuel Tank Liner Kit - Works on all metal gas tanks. use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259)
$50.78

Fuel Tank Repair Kit - Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4" long and holes up to 3/8" in diameter. NOT for plastic fuel tanks. (Part No: FTR180)
$21.03

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe O.D. - 2.53 inch Overall Length. (Part No: R7949)
$9.00

Fuel Tank Webbing, 3 Ft - Black woven nylon type material, .042" thick, 3 foot section. (Part No: FTW494)
$4.13

Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003)
$10.67

Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8" diameter, 2.150" O.D., Made in the USA. (Part No: C1778R)
$2.49

Stop Cable - This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Part No: PTSTOP)
$7.79

Gaskets
Gasket Material, Cork Rubber - 3/32" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR332)
$10.84

Gasket Material, Cork Rubber - 1/16" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR116)
$13.81

Gasket Material, Exhaust Manifold - 1/16" thick x 12" wide x 28-1/2" long. Perforated steel core to make manifold gaskets. (Part No: GSKEM1228)
$17.72

Gasket Paper, .0160 - .0160" x 18" x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1844)
$15.79

Gasket Paper, .0275 - .0275" thick x 18" wide x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1898)
$22.72

Gauges
Ammeter Gauge - 60-0-60, 12 volt, 2" body diameter. Not illuminated. (Part No: AMG60)
$3.98

Hourmeter - DC voltages from 12V thru 36V nominal. Heavy duty glass-reinforced polyester body. Internal shock shields & grommets protect movement from shock & vibration damage. Fits 2-1/4" opening, three(3) mounting screws with nuts and two(2) blade terminals included. (Part No: HM771)
$46.19

Hourmeter, Analog - 2", black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40

Oil Gauge Copper Line Kit - Universal, for tractors using 1/8 x 6 ft. copper oil line. Includes 6 Ft 1/8 Line, 2 x 5/16 -24 UNF Nuts, 2x Compression sleeves, and a 1/8-27 NPTF Female to 5/16-24 UNF male adapter. (Part No: UNI523)
$25.20

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line adapter if you have a gauge line without removable fittings, this converts 1/8" pipe thread to 1/8" tube. Brass. (Part No: 919095)
$13.27

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8" pipe thread to 1/4" tube. Brass. (Part No: IHS626)
$12.72

Oil Pressure Gauge - Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002)
$8.62

Temperature Gauge - Universal water Temperature gauge(0-280 degree scale). Fits tractor model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 male adapter, engine block or radiator threaded hole. (Part No: 1042944)
$6.53

Temperature Gauge, Universal - For 2" mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 NPT and 1/2 NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77" capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$15.00

Temperature Gauge, Universal - Heat indicator for 2 inch hole. Complete assembly with bracket and adaptors. Numeric Face. Install in block, head or hose. Dial calibrated to 250 degrees. 70 inch metal wrapped capillary line. (Part No: UTG25)
$22.02

Hitch / Drawbar
Center tube, Stablizer - Center tube for SK102CH stabilizer kit. (Part No: SK102CH-CT)
$13.66

Check Chain & Pin Kit - Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Part No: CBPN598A)
$12.05

HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire dia 3/16, length 3.75), four(4) of HP-4 (wire dia 5/32, length 2 15/16), four(4) of HP-5 (wire dia 1/8, length 2 9/16), and three(3) of HP-6 (wire dia 3/32, length 1 5/8). (Part No: HPA15X)
$55.09

HITCH BALL 10000LB 2-5/16 - 2-5/16 BALL SIZE, 1-1/4 STUD THREAD, 2-1/2 STUD LENGTH, 10, 000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114)
$23.85

HITCH BALL 15000LB 2-5/16 - 2-5/16 BALL SIZE, 1-3/8 STUD THREAD, 2-5/8 STUD LENGTH, 15, 000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138_)
$25.04

HITCH BALL 2000LB - 1-7/8 BALL SIZE, 3/4 STUD THREAD, 1-3/4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834)
$9.23

HITCH BALL 3500LB - Hitch ball. 2" ball size, 3/4" stud thread, 1-7/8" stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234)
$9.48

HITCH BALL 5000LB - Hitch ball. 2" ball size, 1" stud thread, 2-1/8" stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21)
$10.83

HITCH BALL 5000LB 2-5/16 - Hitch Ball, 2-5/16" ball size, 1" stud thread, 2" stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)
$15.39

LINCH PIN - Package of 10 linch pins. Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14)
$5.24

LINCH PIN - Package of 10 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP516)
$4.28

LINCH PIN - LINCH PIN Package of 10 linch pins. 3/16" O.D. pin x 1-1/4" Long.***Enter 1 for package of 10** (Part No: DKP316)
$4.17

LINCH PINS - Package of 10 linch pins, 7/16 dia. pin x 1-3/4 useable length, 1-5/8 dia. ring. Cold Forged. Enter 1 for package of 10. (Part No: DKLP91)
$4.17

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8" mounting pins and adapter bushings, 27-1/4" width, 3-1/2"x 3-1/2" beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101)
$238.15

Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1" thick x 2-1/2" width) . Prevents drawbar from rotating. (Part No: 49A29)
$22.14

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2)
$20.93

Universal Stabilizer Chain Kit - Chain stabilizers, Turnbuckle & chain links adapt to any size 3-point hitch - usually used on larger tractors - VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed & sold in pairs, less brackets. (Part No: SK102CH)
$48.73

Hydraulic System
Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Part No: H42-2M-180)
$51.75

Hydraulic Parts, Universal - Universal hydraulic parts such as hoses, filters, pressure gauges etc.. can be found in the Accessories and Universal parts section. NOTE

Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$14.00

Axle Nuts (5) - 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH)
$1.69

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH)
$1.94

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22)
$6.30

Blade Bolt Kit - Price is for each bolt with hardware. Must be ordered in quantities of 2. For rotary cutter blade used on rotary cutters. Please verify dimensions before ordering: A = 1 1/8-12 inch, B = 3 1/2 inch, C = 1 3/8 inch, D = 1 inch, E = 9/16 inch, F = 1/2 inch, G = 2 1/2 inch, H = 1.492 (for 1 1/2 Blade Hole), I = 1.12 inches. (Part No: 63607)
$12.04

Bush Hog Axle Spacer Bushing - Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: SPB40)
$4.91

Caster Assembly - Tail wheel & hub assembly with grease fitting and fork assembly. New Style Tail Assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269)
$176.32

Caster Assembly, Old Style - Tail wheel & hub assembly with grease fitting. 4 x 8 inch rim, 15 inch O.D. of wheel. Includes Wheel, Hub, Axle Bearing, and Bolt Assembly.OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: BH215)
$107.75

Graphite Lubricant - Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP)
$21.25

HUB with BRG CUPS - 4-bolt, 5" bolt circle & 3-5/8" wheel pivot hub with bearing cups (1" axel) (Ref #5). This part fits Caster Assembly (Part Number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1311)
$44.80

Hub Assembly - Hub with bushings (3/4"), wheel bolts (4), and grease fitting. Center tube length 5". For rotary cutters: RB60 with new style 1-1/4" dia. caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)
$37.46

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129)
$44.70

Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100)
$77.06

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 241166)
$97.46

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 241166)
$97.46

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162)
$100.37

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162)
$100.37

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162)
$100.37

Round Bale Tine 55 Inches - Fully Hardened. (Part No: 241163)
$109.42

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH)
$5.56

Tail Wheel Assembly - 6" x 9" tail wheel assembly with laminated tire, less hub. 4" pilot, 5 bolt holes, 5-1/2" bolt circle. 5-1/4" wide, 21" O.D., 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)
$124.93

Tail Wheel Assembly - 6" x 9" tail wheel assembly with laminated tire, less hub. 4" pilot, 5 bolt holes, 5-1/2" bolt circle. 5-1/4" wide, 21" O.D., 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)
$124.93

Tail Wheel Assembly - 4" x 8" tail wheel assembly with laminated tire. 3-5/8" pilot, 4 bolt holes, 5" bolt circle, 3-3/4" wide, 15" O.D. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 & 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Part No: 500BH)
$44.31

Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP)
$21.75

Lights
Halogen Work Light-Double Bulb - 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V)
$51.42

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R)
$14.67

Magnetic worklight Universal Mounting. - Can be placed anywhere there is a metal surface. 3-1/2" x 6" weather resistant steel body (black), glass lens, flood pattern, 140 ft. beam. Halogen bulb, 12 V, 55 watt, replaceable. 12 ft. cord with cigarette lighter plug. (Part No: L100MAG)
$43.12

Portable Halogen Work Lamp - 3" x 5" sealed beam unit, 12 V, 50 watt, 4 amp. With handle & magnetic base. Projects flood beam pattern 50 ft. wide x 30 ft. long. Lamp is not legal for street use. (Part No: L200MAGH)
$74.75

Safety Light Amber - 12 volt amber safety light, 4-1/4 diameter, 3/8 diameter by 5/8 mounting stud. Does not include Flasher. (Part No: S.61357)
$10.88

Work Lamp, HID, Flood Light - Universal high intensity discharge flood light, 35W Xenon H3 lamp, size 4.725" W X 4.330" H X 5.512" L, internal ballast, hardened glass lens, far longer life span than halogen 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E)
$127.64

Work Light 12V With Switch - Work light, 12 volt, 3000 candle power, trapezoidal light pattern. On-off switch on back of light housing. Uses 4-1/2" diameter sealed beam lamp, L4411. (Part No: L408-12V)
$41.40

Worklight 12 Volt - Red 12 Volt worklight with handle, on/off switch, swivels and rotates. (Part No: S.42792)
$29.92

Worklight 12 Volt Black - 12 Volt worklight with handle, on/off switch, swivels and rotates. Mounting Holes measure 4 3.8 center to center. (Part No: S.67771)
$31.65

Miscellaneous
Canopy - 60" wide x 65" long, moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through moulding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold seperately. Additional $150.00 shipping due to weight and size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X)
$430.31

Canopy Mounting Kit, 2 Post - Mounts the canopy to your 2 post ROP frames except Hoop Type Frame. We need the measurement of the top of the ROP and the size of the ROP Tubing used. Put sizes in the comments section of the order form. (Part No: B6603)
$75.80

Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604)
$65.44

Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP Hoop Type ROP Frames up to 52" wide with leg thickness up to 4" x 2" (Part No: B6602)
$110.28

Canopy, Small Tractors - 45" Wide x 60" Long Moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through moulding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD)
$374.50

Deluxe Canopy, 3 Bow - Red. 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: RFC100R)
$235.53

Deluxe Tractor Umbrella - Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or Blue. State color desired in comments section of order form when ordering. (Part No: TU56-X)
$155.22

HAND CLEANER GALLON - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: PRM25218)
$28.72

Oil System
Lucas Heavy Duty Oil Stabilizer (quart) - A pure petroleum multi-use oil supplement. Controls noise, heat and wear in manual transmissions and differentials. Number one in the heavy duty and high performance industries. Lucas Oil Stabilizer is a 100% petroleum product formulated to eliminate dry starts and reduce friction, heat and wear in any type of engine. It allows motor oils a higher degree of lubricity which reduces oil consumption and operating temperatures. Use Lucas Oil Stabilizer in gear oil to stop leaks, reduce operating temperatures and increase the life of the gear oil. Since it is pure petroleum. Key Features Increase oil life at least 50% longer, Reduces oil consumption, Eliminates dry starts, Raises oil pressure, and Increases power and miles per gallon. (Part No: LU10001)
$14.46

PTO / Driveline
Driveline Assembly - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor and implement yokes. 1333mm (52-1/2 inch) overall length, end of yoke to end of yoke. 1110mm (43-3/4) compressed length center to center of cross bore. Cross and bearing kit is 27mm 1.063 (1-1/16) bearing diameter x 74.6mm 2.940 (2-15/16). 1333mm (52-1/2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY138)
$168.58

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor & implement yokes. 1-3/8 6 spline Q.D. tractor yoke. 1-3/8 round bore with 1/2 pin hole implement yoke. 1300mm - (51 inch) overall length end of yoke to end of yoke. 1110mm (43-3/4) compressed length center to center of cross bore. Cross and bearing kit, 27mm - 1.063 (1-1/16) bearing dia. x 74.6mm - 2.940 (2-15/16) overall length (43-3/4) . Verify length before ordering. (Part No: AB4111WY)
$187.82

Driveline Assembly with Yokes - AB4 series. Complete drive shaft assembly with shielding and tractor & implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-1/4 round bore with pin hole implement yoke. 1350mm (53) overall compressed length end of yoke to end of yoke. Cross and bearing kit, 27mm - 1.063 (1-1/16) bearing dia. x 74.6mm - 2.940 (2-15/16). Overall length 1350mm (53) ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY125R)
$185.22

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 - 6 spline Q.D. tractor yoke, 1-3/8 - 6 spline ratcheting torque limiter iwth quick disconnect on implement end. 1372mm (54 inch) overall length end of yoke to end of clutch. 1110mm (43-3/4) compressed length center to center of cross bore. Cross and bearing kit 27mm -1.063 (1-1/16) earing dia. x 74.6mm - 2.940 (2-15/16). 1372mm (54) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111K33)
$288.01

Overrun Coupler with Quick Release - This Overrun Coupler features a Quick Release. It fits applications needing a male and female end of 6 splines and 1 3/8 inches. (Part No: S.23639)
$77.31

PTO Safety Clutch, 40 HP - 1-3/8" 6 spline male and female ends, 6" diameter, 40 HP capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164)
$225.31

Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: JDV-02250)
$25.68

Acrylic Hardener, 16oz - This Acrylic Hardener is for all our Alkyd Enamel paint to be mixed with either gallons or quarts. Lead free. Improves initial dry time and hardness development. Not compatible with other fast dry enamel or other paints. This 8 ounce container mixes from 2 quarts to 1 gallon of unreduced paint. This product will greatly increase the paints anti-chip resistance and will add a slight gloss to the paint. (Part No: TP12P)
$40.53

Acrylic Hardener, 8oz - This Acrylic Hardener is for all our Alkyd Enamel paint to be mixed with either gallons or quarts. Lead free. Improves initial dry time and hardness development. Not compatible with other fast dry enamel or other paints. This 8 ounce container mixes from 2 quarts to 1 gallon of unreduced paint. This product will greatly increase the paints anti-chip resistance and will add a slight gloss to the paint. (Part No: TP12HP)
$21.40

Aluminum High Heat Paint - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP402HHSP_)
$53.49

Aluminum High Heat Paint - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP402HHSP_)
$53.49

Black Hi-Heat Spray Paint - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP411HHSP_)
$53.49

Dakota Prep & Shine, Twin Pack - Kit inlcudes (1) 16.oz bottle Dakota Prep with spray nozzle, (1) 16 oz. aerosol can Dakota Shine, (2) scrub pads (1) light, (1) aggressive. (Part No: DS2PK)
$42.18

Dakota Prep, 1 Gallon - Dakota Prep is a water-based and biodegradable cleaner that will remove wax buildup, grease, oxidation and grime from a variety of surfaces to renew paint to its previous luster. It is safe on many surfaces including painted surfaces, decals/vinyl lettering, plastics, fiberglass, clear coat finishes, aluminum, glass and rubber. (Part No: DP1G)
$79.35

Dakota Shine, 1 Gallon - Dakota Shine is a unique and patented product that will restore the color, lustre and value to faded and oxidized surfaces like paint, decals, plastics, fiberglass, engine compartments and more. The ingredients are designed to penetrate the surface to rejuvinate the pigments to their original, lime-new appearance. No mixing required, quick dry time and no overspray lines to buff out. Used in conjunction with Dakota prep for best results. (Part No: DS1G)
$109.61

Paint, Allis Orange, 1 Quart - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP280QT)
$21.66

Paint, Allis Orange, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP280SP)
$52.16

Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312GAL)
$49.36

Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312QT)
$21.66

Paint, Aluminum, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312SP)
$52.16

Paint, Clear Coat, 1 Gallon - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447GAL)
$76.04

Paint, Clear Coat, 1 Quart - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447QT)
$30.93

Paint, Clear Coat, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447SP)
$55.30

Paint, Gray Primer, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700GAL)
$50.40

Paint, Gray Primer, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700QT)
$20.58

Paint, Gray Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700SP)
$49.68

Paint, Red Primer, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP3987GAL)
$46.89

Paint, Red Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP3987SP)
$45.46

Paint, Satin Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225GAL)
$45.94

Paint, Satin Black, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225QT)
$18.84

Paint, Satin Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225SP)
$59.78

Paint, Soft Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP200GAL)
$56.24

Paint, Soft Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP200SP)
$45.21

Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL)
$68.39

Slip Resistant Coating - Quart can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 19 to 25 square feet. (Part No: BL116QT)
$28.23

Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. (Part No: BL116KIT)
$99.22

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. A little goes a long way! (Part No: E844Q)
$22.47

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$42.75

Seats
Pan Seat, Universal - 17 inch wide Gold zinc plated, 3-1/2" center to center on mounting holes, 1/2" by 1/2" center square. (Part No: B1865)
$51.56

Seat Belt - Universal Seat Belt. Can be adapted to many tractors. (Part No: RSB22)
$37.79

Seat Belt, Universal - Seat belt, universal 2-point static adjustable belt. Fits TS1110 seats. (Part No: TS1110BELT)
$17.79

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt –up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V)
$1511.29

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt –up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056)
$1437.23

Seat, Air Suspension, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt –up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V)
$1511.29

Seat, Industrial - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18" W, 19" H, 21" D. (Mounting holes 9" W x 9-3/4" D). Fits several Commercial Turf/Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY)
$102.91

Seat, Universal - **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. Add $15.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: TS1040ATSP)
$74.02

Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is Black. Additional $30 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: TS1050ATSP)
$74.02

Seat, Universal - BLUE Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLUE. (Part No: TS1060ATSP)
$74.02

Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP)
$78.14

Seat, Universal - Seat assembly, Black leatherette upholstery, Dimensions: 18-3/4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward/rear adjustment (Slide track 9 inches W x 11-1/4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before purchasing. Weight 33 lbs. (Part No: TS1110BK)
$110.68

Seat, Universal - Seat assembly, Blue leatherette upholstery, Dimensions: 18-3/4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward/rear adjustment (Slide track 9 inches W x 11-1/4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110BL)
$113.74

Seat, Universal - Seat assembly, Yellow leatherette upholstery, Dimensions: 18-3/4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward/rear adjustment (Slide track 9 inches W x 11-1/4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110YL)
$110.68

Tie-On Seat Cover - Orange & White, 21" wide. Deluxe with 2 inches of foam. (Part No: R1012)
$44.66

Universal Seat - Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15" wide, 17" long, 19" high to the back of the seat. (Part No: TS1015)
$182.49

Sheet Metal / Body Parts
2 Hour DVD - The How To of Sheetmetal Repair - This DVD is intended to show how to restore sheetmetal on your tractor. A John Deere tractor is used in the demonstrations but the information is useful for all tractors. You can use this DVD as a tool to evaluate what work, cost, and time it is going to take to restore the tractor you own or are looking to purchase. 118 minutes. (Part No: RCR06-DVD)
$25.68

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: R0140)
$31.59

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, and 1/2. (Part No: RPD112K)
$146.93

SAFETY STEP KIT - Traction Where you need it. Great for use on tractor and combine steps, trailers, grain bin ladders and more. Kit includes 1 pint safety base and safety grit. (Part No: SSK14011)
$53.12

Toolbox - This universal toolbox fits various tractor models. It measures 11 inches long, 4 inches wide, and 4 1/2 inches tall. The mounting holes must be drilled to match your tractor. (Part No: ABC308)
$42.75

Toolbox - Universal Toolbox 15 1/2" X 4 3/4" X 4 1/4". Comes Primed ready to prep and paint. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R2685)
$30.87